Natural product analysis using Carbon-14 is a valuable scientific tool that can be used to confirm the naturality of cannabidiol-based (CBD) ingredients by verifying the percentage of a product that is obtained from naturally-sourced ingredients. Determining the percentage of biobased content in a product allows companies to ensure their CBD ingredients are truly natural-derived, identify the presence of synthetic adulterants, and authenticate marketing and “natural” labeling claims.
Why consider natural product analysis using Carbon-14 to validate your natural CBD products?
Carbon-14 is an isotope present in naturally-sourced materials. Natural product analysis measures the percentage of Carbon-14 present in an ingredient or product. Higher percentages indicate that a product is primarily or completely made with natural-sourced ingredients as opposed to synthetic, petroleum-derived alternatives. These cheaper, synthetic alternatives created from petroleum-based sources cannot be measured using Carbon-14. A product that is all-natural and completely plant-sourced will show a result of 100% biobased content whereas a low or zero percentage will reveal a product that is partially or completely formulated with synthetic adulterants.
The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.
Why should you be concerned with verifying the naturality of your CBD products? In recent years, the popularization of CBD extract has increased its demand as an ingredient in personal care and cosmetic products. Higher costs associated with the use of natural CBD extract instead of artificial extracts leads to the use of adulterated ingredients by some manufacturers or false label claims that a product is natural when it is not.
How can you prove your products are the real deal and ensure your customers are sure they’re getting the natural ingredients they expect? Artificial ingredients derived from petrochemical sources do not contain any carbon-14 content. The results of natural product analysis reveal the percentage of a sample that is procured from natural sources, allowing manufacturers and quality assurance teams to confirm their CBD ingredients and products are not synthetic or adulterated and to strengthen claims that their product is truly natural-derived.
Natural product analysis can authenticate the natural content of your CBD products. Validating naturality with Carbon-14 testing strengthens label and marketing claims and confirms your products and ingredients are completely natural and do not contain cheap synthetic adulterants. By verifying the percentage of our product that comes from natural sources as opposed to artificial, petrochemical sources, you can guarantee your product is genuinely made with natural CBD extract.
Cannabinoids—the molecules found in the cannabis plant—are becoming an immensely popular industry, with applications in pharmaceuticals, food and beverage, cosmetics and more. However, the traditional method of harvesting cannabinoids through plants has a tremendous environmental footprint, with the energy-intensive practices required to produce the cannabis plant costing the U.S. billions of dollars each year.
Fortunately, new innovations have emerged that will make this process require significantly less time, energy and natural resources. This article will explore two methods of rare cannabinoid production—the traditional method of cultivation through plants and the newer method of biosynthesis—and will compare their impact on the environment.
Natural Cultivation
The companies that use the traditional process of growth, harvest, extraction and purification have a major problem when it comes to harvesting rare cannabinoids. Rare cannabinoids only show up in trace amounts in plants, which means you need to grow vast quantities of plants to harvest just a tiny amount of rare cannabinoids.
Once you factor in the amount of plants that need to be grown, equipment, fuel, fertilizers, water, man hours, harvesting, extraction and purification, the costs are economically unfeasible. This process uses so much energy, natural resources, water and fertilizers that the end product is not affordable for the majority of consumers.
Cultivation through plants requires hundreds of acres of land, thousands of pounds of fertilizer, thousands of gallons of water and thousands of man hours. In addition, this process uses significant amounts of energy to run equipment, in addition to extraction and purification. Plus, the end products can contain contaminants and toxins due to heavy metals, pesticides, pests, mold and more.
Biosynthesis
Biosynthesis is the production of a desired compound through the natural means of an organism’s biological processes. It produces identical compounds to those found in nature, lending itself as the optimal pathway for the manufacture of cannabinoids identical to their naturally occurring counterparts.
While cultivation through plants is harmful to the environment, biosynthesis produces a much lower environmental footprint because it requires significantly fewer resources. Biosynthesis requires over 90% less energy, natural resources and man hours, along with zero fertilizers, contaminants and toxins. There also no extraction and purification costs.
Biosynthesis needs only 6,000 square feet to produce the same amount of rare cannabinoids as hundreds of acres of plants. This process produces pharmaceutical-grade, organic, non-GMO products at a 70-90% lower cost than cultivation through plants—resulting in cannabinoid products that are more affordable for the consumer.
With climate change increasingly becoming a concern, it’s crucial for us to rely on more environmentally friendly avenues for cannabinoid production. Biosynthesis provides a method of cannabinoid production that requires significantly less time, energy and natural resources than cultivation through plants—resulting in not only a decreased environmental footprint but also safer and less expensive products.
The task of preserving privacy for any records platform, especially a cannabis registry, cannot simply be relegated to ones and zeros lurking in some forgotten codebase. This past year taught us many lessons, especially related to the trauma unleashed by vulnerabilities in government domains. We learned time and again that a registrant’s privacy must be the first order of business for the architects of registries.
But the first order of business isn’t the last order of business. That intention and effort to secure privacy must then be communicated and reinforced through real-world reality checks.
Lapses in data security and rising distrust for government institutions block the efficacy of well-intentioned and vital registries. Those states launching new registries in 2021 are at a precarious crossroads as public trust erodes.
But many in the government sector are staring at a once-in-a-generation challenge to launch new registries – those related to cannabis – with privacy top-of-mind from the initial Request For Bid.“The question isn’t when these privacy-first registries will be implemented, it’s a question of whether they’ll be implemented proactively ahead of hacks or after the damage is done.”
Here’s how:
Table Stakes for New Cannabis Registries
These suggestions are just the beginning, and I see them as the minimum buy-in to begin the architecture of a new cannabis registry. They include:
End-to-end data encryption while in transit and within the system while the data is at rest.
A solution that is a cloud-native web application which is managed as a service for maximum uptime and strong security posture.
Registries should also leverage algorithms and machine learning to ensure accurate data entry by analyzing incorrect or duplicate data before it is saved within the system.
Beyond HIPAA
The Health Insurance Portability and Accountability Act (HIPAA) requires privacy and security measures to protect Personal Health Information (PHI). Debate exists on whether compliance is a requirement for all entities transacting in the medicinal cannabis space. While some state registries are exempt from HIPAA, others choose to provide HIPAA compliance not just for the optics, but the known benefit to users’ privacy and confidence. New cannabis registries should commit to HIPAA-compliance to set a trusted new privacy standard for medical patient credentials and legal authorization for the use of cannabis for medical purposes.
That’s just the start. Registries should also ensure SOC2 Type II certification, which safeguards security, site availability, confidentiality and privacy through independent third-party auditors.
Connect with Confidence
Registries function as a hub of information in an often-confusing cannabis space. The California Bureau of Cannabis Control displays more than 25 links wired into its top navigation bar alone. Each link sends the curious to new resources. Registries must establish themselves as credible resources, especially when directing users to third-party sites.
One example is for cannabis registries to provide secure access to healthcare professionals who are verified by the Drug Enforcement Agency (DEA). These healthcare professionals are licensed to distribute controlled substances including cannabis. Each third-party link should offer the same high-level of scrutiny to enshrine confidence and credibility in the registry.
Next-Generation ID Cards
A cannabis registry card should not just be a document, but a toolset that attests to the identity and the authority of the carrier represented. An illicit counterfeiting market seeks to exploit registry card vulnerabilities. Next generation ID cards present the best defense against counterfeiting and illegal use with robust security measures. That starts with assuring that any credential is mobile ID compatible with iOS Wallet and GooglePay for mobile identification.
ID cards should also include:
The automated modification of the document bearer’s photograph to ICAO (International Civil Aviation Organization) standards. This critical modification makes the photograph easier to use for ID verification; it also facilitates the detection of photograph substitution.
A two-dimensional barcode compiles information contained in a one-dimensional barcode. It also delivers confirmation of other data shown on the card or in the system such as license authorization and limitations. Adding additional material to the physical document such as holograms, UV image, micro-printing or laser perforations offers another level of protection against illicit use or counterfeiting.
While cannabis registries are the beginning, they’re not the end. Driving efficacy for government registries needed for COVID19 track-and-tracing, cannabis plant track-and-tracing and vaccine distribution require the same attention to privacy, security and ultimate useability. A sea change is required – not just for the sake of those who use the registries but also for those who must implement, deploy and maintain those registries. The question isn’t when these privacy-first registries will be implemented, it’s a question of whether they’ll be implemented proactively ahead of hacks or after the damage is done. I believe the government sector leaders exploring new cannabis registries offer the wisdom and foresight to choose the proactive approach.
On March 23, 2021, Cannabis Industry Journal is hosting our annual Cannabis Cultivation Virtual Conference. From Noon to 5 pm EST, you’ll get access to nine veterans of the cultivation market discussing a variety of topics related to the ins and outs of growing cannabis and hemp.
Hear from subject matter experts who will share their perspectives on growing organically, facility design and planning, hemp farming and integrated pest management.
Back in December during the Cannabis Quality Virtual Conference, the Cultivation Technology episode featured a session titled A Panel Discussion: Integrated Lifecycle of Designing a Cultivation Operation. Due to a large amount of interest and attendee questions that the panel did not have time to address, we are reprising this panel discussion and bringing it back on March 23.
Speakers for that panel discussion include: Gretchen Schimelpfenig, PE, Technical Director of Resource Innovation; Brandy Keen, Co-Founder & Sr. Technical Advisor at Surna, Inc; Adam Chalasinski, Applications Engineer at Rough Brothers/Nexus Greenhouse Systems/Tetra; David Vaillencourt, Founder & CEO of The GMP Collective, and Kyle Lisabeth, Vice President of Horticulture at Silver Bullet Water.
Other talks from the Cannabis Cultivation Virtual Conference on March 23 include:
Why CBD Companies Should Go Organic
Brad Kelley, COO of Socati
The Beginner’s Guide to Integrated Pest Management
David Perkins, Founder of Floresco Consulting
Starting from Scratch: Launching a Hemp Farm in Georgia
Reginald “Reggie” Reese, Founder & CEO of The Green Toad Hemp Farm
Dwayne Hirsch, President & Chief of Business Development at The Green Toad Hemp Farm
You can check out the agenda in its entirety and register here. Attendees will have the opportunity to ask speakers questions during the live Q&A session that follows each session. Registration is complimentary. For sponsorship opportunities, contact RJ Palermo at Rj@innovativepublishing.net
Supercritical carbon dioxide (CO2) extraction is a processing technique whereby CO2 is pressurized under carefully controlled temperatures to enable extraction of terpenes, cannabinoids and other plant molecules. Once the extract is obtained the crude is often subjected to an ethanol winterization process to remove chlorophyll, fats and waxes.
Green Mill Supercritical is a Pittsburgh-based manufacturing and engineering company focused on cannabis and hemp extraction. The company offers a range of CO2 extraction equipment where users can tune and control their extraction methods. They recently announced a technology advance enabling winterization in-process, which has the potential to remove the need for ethanol winterization.
We spoke with Jeff Diehl, director of marketing at Green Mill Supercritical, to learn more about the new process. Jeff was working in the tech industry in San Francisco in 2017 when he was invited to join Green Mill by his cousin, Jeremy Diehl, who is the founder and CTO.
Aaron Green: Before we get to your new technology, can you explain what industry trends you are watching?
Jeff Diehl: A big thing that I watch is the premium extract space. More and more consumers are demanding higher premium extracts. They want differentiated products. They want products that are safe and that have some kind of meaningful connection to the specific plant from which they came. Right now, CO2 plays a small role in the market for those products. Most premium products are generated through hydrocarbon extraction. So, I am watching how people are using CO2 to create the next generation of safe, premium products.
Aaron: What is the normal process for a CO2 extraction today?
Jeff Diehl, director of marketing at Green Mill Supercritical
Jeff: The current CO2 extraction process generally consists of two major phases to producing your final extract. In the first phase, you have extraction where you get your crude product. The second phase is post-extraction where you do cleanup to get your refined oil. Within that post-extraction phase, most operations include an ethanol-based winterization process.
Aaron: What does the winterization step do, exactly?
Jeff: Winterization is about removing waxes. Your main extraction is considered crude because it’s got a lot of materials from the plant that you don’t want. The large majority of unwanted material is waxes. Winterization is the process of using a solvent, traditionally ethanol, to separate the waxes from the cannabinoids. There are multiple challenges inherent in ethanol-based winterization that introduce cost, time and product loss. It’s terribly inefficient. Plus, there will always be residual ethanol left in your final product, and that’s not something consumers appreciate.
Aaron: You’ve recently announced a new process at Green Mill that moves the winterization step into the supercritical CO2 equipment. Can you explain how that works?
Jeff: With our process, which we call Real-Time Winterization, there is no ethanol involved in winterization anymore. It is all done with CO₂ during the primary extraction. That’s the major advance of our process and although it has been attempted before, no one has succeeded at doing it in a viable way. You take a process which is normally four days – one day for CO2 extraction and three days for ethanol winterization – and you do it all in less than a day. We have automated software, sensors and pumps that makes this all possible.
Aaron: How does the quality of the resulting product compare with the new process?
Jeff: You can see the difference right away, if you’re at all familiar with extraction. It just looks clean and bright. Lab analysis has been very positive thus far, but we continue to run tests. Our R&D team has done multiple tests, mostly on hemp and CBD. That’s because we don’t have a license for THC. We’re currently engaging with a licensed partner so that we can collect more data on THC-containing products, so we can give exact numbers. But with CBD, we’ve done multiple tests to validate the method and the technology, and are seeing consistently excellent results in regards to both purity of the product and efficiency of the process.
Aaron: How do yields compare between the processes?
Hemp CBD extract straight out of a Green Mill SFE Pro running Real-Time Winterization.
Jeff: From the data that we’ve seen in the industry, it looks like when you winterize with ethanol, you leave anywhere from 5 to 10% of your cannabinoids behind in the waxes. That’s just lost. With Real-Time Winterization using CO2 we have seen recovery rates as high as 99%. We are continuing to investigate that result with testing to make sure it was not an outlier, but in any case, recovery rates look promising.
Aaron: One of the other issues with ethanol is taxes and the ability to find food grade supply. Do you have any perspective you can share on that?
Jeff: There are a number of advantages to moving away from ethanol. The sheer quantity of ethanol is a factor. There are a lot of regulations and fire requirements around managing large quantities of ethanol. The ethanol winterization process itself is not just one process. There are multiple stages, from mixing, to freezing, to filtering, to removing the solvent. These are all opportunities for things to go wrong, so you’re always managing those risks. Multiple large pieces of equipment, including fume hoods, filter skids, cryo freezers and rotary evaporators, are expensive and require heavy management.
I think Elon Musk said the best process is no process. Anytime in an industrial process when you can remove steps in the process, that’s the direction you want to go in. And, that’s what we’ve done. With this recent work, we have effectively removed post processing for certain categories of end product.
Aaron: Do you have any patents on the new process?
Jeff: We have a patent pending on both the method and the equipment, which is allowing us to talk about this as much as we are.
Aaron: So, how does this work if somebody already owns an existing piece of Green Mill equipment? Is this something that can be retrofitted? Is it a software upgrade?
Jeff: There are two components. One is an equipment upgrade, which can be done retroactively for existing customers, and one is a methodology upgrade, which we assist our customers with. The automation software inherently can handle the settings that you need to run the methodology. In fact, it’s that software and the rest of our existing tech stack, the proprietary pump, the triple inline fractionation, the precision and stability of the overall system, that is what made this winterization advance possible.
Aaron: Where are you rolling this out first? And do you plan to go international?
Jeff: International is definitely in the plan, since we’ve already sold systems abroad. We are currently getting ready to announce the opening of our beta program with the new technology. So, we’re not ready to sell this widely at this time, but we are taking submissions from companies that want to get in early and join us at the forefront of CO₂ extraction innovation.
Aaron: Okay, great. Thanks Jeff, that’s the end of the interview.
Update: The House Judiciary Committee has passed the legalization bill, HB0209, by a 6-3 vote. After moving out of the Judiciary Committee, the bill now awaits a floor hearing, which is expected to come within the next week or two during the legislative session that ends on April 2.
A bipartisan group of lawmakers in Wyoming have introduced a bill to legalize cannabis in the state’s legislature. First reported by Buckrail.com, HB0209 was assigned on March 2. The bill would legalize possession, home grow and sales for adults, as well as establish a regulatory framework for licensing, tracking and taxation.
In November 2020, voters in Montana and South Dakota passed ballot measures that legalize adult use and sales of cannabis. About a month after Election Day, the University of Wyoming conducted a poll that found roughly 54% of Wyoming residents now support legal adult use cannabis. In 2018, UW found that 85% of Wyoming residents support medical cannabis legalization.
In March of 2019, Wyoming Governor Mark Gordon signed a bill into law that essentially legalized hemp in the state. That bill was a boon for the state’s agricultural economy, giving many farmers a much-needed boost in their crop diversity.
Wyoming Governor Mark Gordon
You can find the current version of HB0209 here. Sponsors of the bill include: Representatives Jared Olsen (R-Laramie), Mark Baker (R-Sweetwater) Eric Barlow (R-Campbell/Converse), Landon Brown (R-Laramie), Marshall Burt (L-Sweetwater), Cathy Connolly (D-Albany), Karlee Provenza (D-Albany), John Romero-Martinez (R-Laramie), Pat Sweeney (R-Natrona), Cyrus Western (R-Sheridan), Mike Yin (R-Teton) and Dan Zwonitzer (R-Laramie) and Senators Cale Case (R-Fremont) and Chris Rothfuss (D-Albany).
According to Buckrail, if the bill becomes law, Wyoming could get roughly $49.15 million in tax and license fee revenue in 2022. That number would mean a sizable windfall for the state that saw an 8.5% decline in tax revenue in 2020. Governor Gordon proposed budget cuts as high as 15% for agencies across the state last year. Most of the revenue generated from cannabis taxes would be earmarked for education.
What is “fit-for-purpose?” Fit-for-purpose is an established best practice used in several major industries, like information technology, pharmaceuticals, agriculture and inventory management. It is a concept that aligns infrastructure and systems specifications with desired outputs – be that product, service or bottom line. When applied to a cannabis plant, its parts, products and associated processes, it can streamline regulatory framework development, implementation and compliance.
Fit-for-purpose is simply a series of logic questions you ask yourself to determine what business practices you should implement and the regulatory framework in which you must comply. What are you making? Who is it for? Where will it be sold? All this impacts how you would cultivate, process, handle and store a cannabis plant, its parts and products regardless of the type of cannabis plant. The fit-for-purpose concept is a tool that can be applied to any scenario within the cannabis/hemp marketplace. Take for instance, sustainability: a practical example would be to design cultivation standards that are “fit-for-purpose” to the climatic region in which the plants are grown – allowing any type of cannabis plant grown anywhere in the world to meet specifications regardless of the method of production.
There is no “special sauce” here. All fit-for-purpose does is get you to ask yourself: “Are the protocols I am considering implementing ‘fit/appropriate’ to my situation, and if not, which protocols are more ‘fit/appropriate’ based on the products I am making, the target consumer and marketplace in which the products are to be sold?”“Fit-for-purpose is a powerful concept that can be used for simplifying regulatory framework development, implementation and compliance”
A non-cannabis/hemp example of fit-for-purpose could be a scenario where a banana producer wants to implement a data management system into their cultivation practices to better track production and yields. There are many data management systems this banana producer could implement. They could implement a data management system like that of big pharma with multiple levels of redundancy and access control related to intellectual property and other sensitive data. They could also implement a data management system used for tracking warehouse inventory; it cannot exactly capture everything they need but it is better than nothing. Neither example is really “fit/appropriate” to the banana producer’s needs. They need something in between, something that allows them to track the type of products they produce and the data they want to see in a way that is right for them. This idea is at the core of the fit-for-purpose concept.
Applying Fit-for-Purpose
So how do we apply fit-for-purpose to the cannabis/hemp marketplace? Fit-for-purpose reduces the conversation down to two questions: What products are you planning to make and how do those products affect your business practices, whether that be cultivation, processing, manufacturing or compliance. The point being the products you plan to produce determine the regulations you need to follow and the standards you need to implement.
Growers can use it to guide cultivation, harvesting, handling and storage practices. Processors and product manufacturers can use it to guide their production, handling, packing and holding practices. Lawmakers can use it to guide the development, implementation and enforcement of commonsense regulations. This is the beauty and simplicity of fit-for-purpose, it can be applied to any situation and related to any type of product.
Growers can use fit-for-purpose to guide most aspects of their operation
Let us look at some practical examples of fit-for-purpose for cultivators and processors. Cultivators have three main areas of focus, growing, harvesting and storage, whereas processors and product manufacturers have it a little more complicated.
Cultivation of a Cannabis Plant
Growing
Requirements for growing a cannabis plant, including those that can be classified as “hemp”, should be dictated by the product with the strictest quality and safety specifications. For example, growing for smokable fruiting tops (i.e. the flowers) may require different cultivation techniques than other products. You may not want to apply the same pesticides or growth additives to a cannabis plant grown for smokable fruiting tops as you would to a cannabis plant grown for seed and fiber.
Harvesting
The next point is important – harvesting and handling requirements should be agricultural, period. Except for those products intended to be combusted or vaporized and then inhaled. Following our previous example, smokable fruiting tops may require different harvesting techniques than other products, especially if you are trying to maintain the aesthetic quality of these goods. You may choose a different harvesting technique to collect these fruiting tops than you would if primarily harvesting the seed and fiber and thinking of the leftover biomass as secondary.
Storage
When considering the products and their storage, you need to consider each one’s quality and safety specifications. One product may have a temperature specification, whereas another may have a humidity specification. You need to make sure that you store each product according to their individual quality and safety specifications. Then consider the products with the highest risks of diversion and potentially if you need to implement any extra protocols. Continuing our example – smokable fruiting tops, whether classifiable as “hemp” or not, pose a higher risk of theft than seeds or fiber and may require additional security measures depending on the authority having jurisdiction.
Processing and Manufacturing Operations
When applying fit-for-purpose to processing and manufacturing operations, first you must choose the products you want to make and specify the intended use for each product. This allows you to identify the quality and safety requirements and the potential for diversion for each good. Which in turn allows you to specify your manufacturing, processing and handling protocols for each product related to their quality and safety requirements. Then those specific products with higher risks of diversion requiring extra protocols to be put into place depending on local regulations and/or internal risk assessments, should be considered and your practices modified, as necessary.
Commonsense Regulations
Image if regulations governing a cannabis plant, its parts, products and associated processes were based on the intended use rather than a set of attributes that vary from jurisdiction to jurisdiction. It is complicated enough for regulators to think about a cannabis plant or cannabis product without having to worry about if that cannabis plant or cannabis product can be classified as “marijuana” or “hemp.” Fit-for-purpose removes this complication and simplifies the debate.
Using a fit-for-purpose approach eliminates the need to think about the molecular constituents and focuses the conversation on the intended use rather than one or two specific molecules – in this case, d9-THC, the boogie-man cannabinoid. Considering the intended use promotes consumer and environmental health and safety by allowing operators and regulators to focus on what is most important – quality and safety instead of whether something is “marijuana” or “hemp.”
This idea is what drives the real impact of fit-for-purpose. It creates a path forward to a one plant solution. We have where we are now – with “marijuana” and “hemp” – and where we want to get to – cannabis. It is all one plant with many different applications that can be used to create different commercial products. Fit-for-purpose helps bridge the gap between where we are now and where we want to get to and allows us to start thinking about “marijuana” and “hemp” in the same manner – the intended use.
Fit-for-purpose is a powerful concept that can be used for simplifying regulatory framework development, implementation and compliance. Regulations imposed on a cannabis plant, its parts and products should be appropriate to their intended use, i.e. “fit-for-purpose.” This approach challenges the confines of the current draconian bifurcation of the cannabis plant while working within this system to push the boundaries. It creates a path forward to a one plant solution and begs the question: Is the world ready for this novel concept?
As retailers accept the end of in-store shopping as we know it and start adjusting to e-commerce, an improved and more involved customer experience will be imperative for an e-retailer to grow, let alone stay afloat.
Jane recently announced a strategic partnership that combines Jane’s best-in-class product catalog and business tools with Leafly’s consumer marketplace and reach. Together, the companies will build solutions that empower cannabis retailers with fast and simple online shopping experiences that increase consumer purchase behavior. The partnership will seek to help instill consumer trust in the online shopping experience, build stronger customer acquisition tools for retailers, and help dispensaries grow their ecommerce capabilities with consistency and automation.
This strategic partnership comes after a massive year of growth for both Jane and Leafly. In the past year, Jane powered over 17 million orders and $2 billion in cannabis sales, while Leafly has seen more than 4,500 cannabis retailers in North America leverage their platform to bring new customers through the door.
Socrates Rosenfeld, CEO of Jane
We spoke with Socrates Rosenfeld, CEO of Jane to learn more about e-commerce and online marketplaces and how Jane and Leafly came together as partners, rather than competitors. Prior to Jane, Socrates was an Apache helicopter pilot for the US Army later transitioning to consulting with McKinsey.
Aaron Green: Socrates, thanks for taking the time today. What trends are you seeing and following in the industry?
Socrates Rosenfeld: Always happy to chat about the industry. Thanks for having me.
If you were to ask me that question a year ago, I’d say having a digital footprint was something that would give a dispensary or a brand a nice advantage. Today, it’s a must-have for survival. Where it used to be one or the other; online or offline, now we are able to merge the two by replicating a physical store into a digitized form to extend its reach far beyond its walls.
As things become more digitized, information becomes more necessary to run operations. With that we are able to meet the expectations of the consumers who are accustomed to convenience and curation. The omnichannel experience provides the best of both worlds. Access and ease of search with the ability to pick up or have the product delivered the same day from a locally owned and run business.
Reviews are one of the most important aspects of this unification of online and offline. It is something that is lost in solely offline purchases, that we’re now able to collect and organize. This product information allows us to provide customers the purchasing power to make a well-informed decision.
At Jane, we believe it is possible to create wins for the dispensaries, brands and customers – and digitization creates the opportunity for that to happen. I think there’s no better incubator in the world than the cannabis industry to prove that online and offline retail can work in harmony.
Aaron: Jane is the largest e-commerce platform in North American cannabis and Leafly is the largest marketplace in North American cannabis. What’s the difference between an e-commerce platform and a marketplace?
Socrates: Great question. There is definitely some overlap between the two, which is why it makes so much sense for us to collaborate. Ultimately though, our focus and expertise are different. Jane’s ecommerce platform serves as the industry’s digital infrastructure that pushes digital products across various order origination points like a dispensary’s own website, a brand’s own website and now, Leafly’s marketplace. Paired with Leafly’s industry-leading content and market information, together we can complete the entire online cannabis shopping experience – from product discovery through order fulfillment.
Aaron: At first glance, one might think that Jane and Leafly are competitors. How did you see it differently? And how did this partnership come about?
Socrates: Not only is our tech complementary, but we are aligned on mission – to empower consumers, dispensaries and brands with the integrity of the plant in mind.
We want to make it simple for consumers to reach the products that will be most helpful for them. We want to make it possible for dispensaries and brands, regardless of their size, to be able to compete on an even playing field.
It all comes back to being good stewards of the industry. Education and access create a healthy demand for a diverse range of products. That means that the plant stays in the hands of many – safeguarding it from homogenization.
Aaron: How do consumers benefit from the partnership?
Socrates: It really is all about bringing this industry in line with any other retail vertical and meeting the customer where they are. It unlocks more avenues for customers to discover products and access a vast catalog of information and verified customer reviews. Bottom line, this partnership makes shopping for cannabis as simple as shopping online for everything else in the world, while also ensuring the success of the sellers.
Aaron: When you say the sellers, are you talking about the dispensary or the brands?
Socrates: Both, we want to provide value for the entire ecosystem. We can do that directly for dispensaries and brands by enabling an automated ecommerce platform that they can use to power their own website. At Jane, we know that technology can unlock value for everyone, where it is not a zero-sum game and success for one means success for the other. With Jane, both the dispensaries and the brands win.
Aaron: What kind of regulatory challenges do you face through the partnership?
Socrates: There are no real regulatory challenges for the partnership itself. The entire industry operates under regulatory challenges, but it is those regulations that have been the catalyst for innovation. I see the opportunity for legal online payments and national product distribution to play a large role in shaping the industry soon, and a partnership like this will ensure a seamless transition for the industry as things continue to evolve.
Aaron: Final question. What are you personally interested in learning more about?
Socrates: I’ve always been curious about disruptive models. The companies, not just in tech, but any company that has set out to do things differently and has been able to hold true to a vision. That’s what interests me, and I think I will always have something to learn and draw inspiration from.
Aaron: Excellent, that’s the end of the interview, Socrates!
Editor’s Note: While CIJ typically omits the word “marijuana” where possible due to antiquated nomenclature and prejudicial connotations, we understand the legal distinction between cannabis containing THC and hemp requires the use of the word when referencing federal government policies and legislative language.
Despite the rapid evolution of the cannabis industry, the assurance of safe manufacturing practices remains unclear.Both the Food and Drug Administration (FDA) and the Drug Enforcement Administration (DEA) have imposed significant hurdles for cannabis operators to remain on the “right side of the law.” Therefore, manufacturers of both hemp and marijuana products have been left to figure things out on their own, or choose to ignore existing guidance because the lack of federal oversight allows them to do so. Inconsistent regulation on manufacturing, packaging, labeling and testing of cannabis products offers the potential for unsubstantiated, non-scientific and often times blatantly false claims on product safety and efficacy.
Science vs. Law
Hemp and marijuana are both species of the Cannabis family, Cannabaceae. Genetically they are identical but are arbitrarily defined by the presence of delta-9 tetrahydrocannabinol (THC). While science does not differentiate between hemp and marijuana, the law does.
The hemp industry declared a small victory with the passing of the Agricultural Act of 2014 (2014 Farm Bill). Under this bill universities and state agriculture departments were allowed to grow hemp under state law. Additionally, “industrial hemp” was officially defined by establishing the legal limit of THC at 0.3% on a dry weight basis. The Agricultural Improvement Act of 2018 (2018 Farm Bill), under the guidance of the United States Department of Agriculture (USDA), took things a few steps further by authorizing the cultivation of hemp and removed hemp and hemp seeds from the CSA. The bill however provides no language that mandates the safe manufacture of hemp-derived consumer goods. The 2018 version also preserved the FDA’s authority to regulate products containing cannabis and cannabis-derived compounds under the Federal Food, Drug, and Cosmetic Act (FD&C Act). To the surprise of most, listing cannabidiol (CBD), even hemp-derived, as an ingredient on consumer product labels remains illegal under the bill. Furthermore, CBD product manufacturers are not protected under the current regulations. Since 2015 the FDA has issued warning letters to firms marketing CBD products as dietary supplements and/or foods, and in December 2018, FDA declared it illegal to introduce food containing CBD (or THC) into interstate commerce, regardless if it is derived from hemp. To date, the only FDA approved CBD product is GW Pharmaceutical’s Epidiolex.
Marijuana remains classified as a Schedule I controlled substance under the CSA. Thirty-six (36) states have approved comprehensive, publicly available medical marijuana programs, and now 14 states have approved adult use programs, with New Jersey passing legislation on February 22, 2021. However, the industry has seen minimal movement toward mandating GMP requirements in the marijuana market. Only a handful of medical programs require manufacturers to follow GMP. Furthermore, the requirements are inconsistent between states and the language in the regulations on how to approach GMP implementation is vague and disjointed. This fragmented guidance supports the complexity and difficulty of enforcing a coherent, standardized and reliable approach to safe manufacturing practices.
What is GMP and Why Should You Care?
Good Manufacturing Practices (GMPs) are a system for ensuring that products are consistently manufactured and controlled according to quality standards and regulatory guidelines. The implementation of a GMP compliant program ensures consumer health and safety, allows manufacturers to understand the intended use of their products, allows manufacturers to defend product specifications as being appropriate, considers the risks to vulnerable populations and minimizes overall business risk. In a nutshell, GMP equals product safety and quality, and defines the responsibilities of the manufacturer to ensure consumers are protected from the distribution of unsafe and ineffective products. Currently, the GMP “landscape” in the cannabis space is complicated. The various “flavors” (food, dietary supplements, cosmetics and drugs/devices) of GMP leave many confused and frustrated when making the decision to implement GMP. Confusion is a result of unclear regulatory requirements as well as operators not fully understanding how to classify or designate the end use of their product(s). Implementing an effective GMP program requires proper planning (both short and long term), financial commitment and qualified resources.
Where Should You Start?
As the regulatory landscape continues to evolve and mature in the cannabis space, your business model must consider GMP implementation if you wish to remain successful and sustainable.
Intended Use
Before you can implement GMP you must first understand what GMP regulations apply to the intended use of your product(s). Are you manufacturing food, beverages or dietary supplements? Get acquainted with the FDA Code of Federal Regulations (CFRs) on GMP.
Conduct a Gap Assessment
A gap assessment allows you to determine your deficiencies in relation to GMP compliance. The assessment should include, but is not limited to facility design, equipment design, supply chain, risk management and employee training.
Develop an Action Plan
Once the gap assessment is complete a comprehensive action plan will be developed to map out the steps required to achieve GMP compliance. The action plan should follow the SMART Goal principles:
Specific (simple, well-defined)
Measurable (meaningful)
Attainable (achievable, agreed upon)
Relevant (resource-based, reasonable and realistic)
Timely (time-based, defined due dates)
The plan will include prioritized deliverables, due dates and allocated resources in order to strategically plan and execute and complete the required tasks.
Schedule a Mock GMP Inspection
A mock inspection verifies that the action plan was adequately executed. Hire an experienced resource familiar with related GMPs and QMS to conduct the inspection. A successful mock inspection is a perfect litmus test if the end goal is to achieve GMP certification.
Cannabis manufacturers that ignore the obvious progression toward an FDA-like industry will not survive the long game. Those that embrace the momentum and properly plan to mitigate product and business risk – those who demonstrate integrity and are truly in this space to ensure safe, effective and quality products to consumers will come out on top, gain credibility and secure brand recognition.
References:
21 CFR Part 111, Current Good Manufacturing Practice in Manufacturing, Packaging, Labeling, or Holding Operations for Dietary Supplements.
21 CFR Part 117, Current Good Manufacturing Practice, Hazard Analysis, and Risk-Based Preventive Controls for Human Food and the Food Safety Modernization Act (FSMA).
21 CFR Part 210, Current Good Manufacturing Practice in Manufacturing, Processing, Packing, or Holding of Drugs; General.
21 CFR Part 211, Current Good Manufacturing Practice for Finished Pharmaceuticals.
21 CFR Part 700, Subchapter G-Cosmetics.
21 CFR Part 820, Subchapter H-Medical Devices; Quality System Regulation
Congressional Research Service, FDA Regulation of Cannabidiol (CBD) Products, June 12, 2019.
United States Food and Drug Administration-Warning Letters, Current Content as of 02/19/2021.
Flower continues to be the dominant product category in US cannabis sales. In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.
Maggie’s Farm is an integrated cannabis company based in Southern Colorado. Maggie’s Farm has seven adult-use and medical dispensaries and cultivates the vast majority of their flower on outdoor farms. All Maggie’s Farm products are sun-grown from seed in soil that is 100% custom-mixed onsite as well as spring-watered, slow-cured and hand-trimmed. Maggie’s Farm does not use any synthetic pesticides or growth hormones in its cultivation. In addition, for the past eight years, Maggie’s Farm has recently obtained Clean Green Certified®, a designation certifying organic standards and testing that mirrors the USDA organic certification. Maggie’s Farm was the first cultivator in Colorado to earn the Clean Green certification.
We spoke with Bill Conkling, Founder and CEO of Maggie’s Farm to learn more about the benefits of outdoor growing, localism and their Clean Green certification. Bill started Maggie’s Farm in 2010 after growing up on cattle ranches and farms in Colorado.
Aaron Green: Bill, thanks for taking the time today. Tell me a bit about how you got involved in the cannabis industry.
Bill Conkling: I am a native of southern Colorado. I was a medical caregiver back in the early days of legalization, and I saw an opportunity to vertically align after my first legal crop in 2010. I opened up the store in 2011. I’ve been a lifelong proponent of medical, recreational and adult use of marijuana.
I come from a background of farmers and I had worked on cattle ranches and farms throughout childhood. As soon as I graduated from college, I went back to work on a large cattle ranch in the four corners area [of southern Colorado]. That’s where I started to incorporate my indoor cultivation experience and skills with outdoor.
Aaron: What trends are you following in the cannabis industry?
Bill: I was one of the first medical operators to support legalization, so I have certainly followed legalization trends. I’ve looked at some other states in our region in terms of growth and legalization.
Bill Conkling, Founder and CEO of Maggie’s Farm
We’re trying to stay a regional supplier and producer so that we are locally grown. We believe the southwest of Colorado is optimal for outdoor cannabis cultivation.
At Maggie’s Farm, we have followed an organic trend from the beginning and I think that’s becoming more of a trend now. We recently received Clean Green certification to that effect. Our goal is to try to provide the healthiest product at a good value to the market.
I believe that all of the products that are made in the cannabis world come from the flower. Downstream products are only as good as their ingredients. It all starts with the flower. So, we focus on producing a clean, top-shelf quality flower that is produced outdoors.
Aaron: How do you define local?
Bill: Local is staying in the climate that is optimal with the least amount of carbon footprint to the earth. That also means trying to operate so that we’re not moving a lot of product across long distances.
We’re trying to set up farms that are in optimal climates. There is a two or three-state region that I believe is the optimal climate for outdoor marijuana cultivation in our country.
Aaron: What states are those specifically?
Bill: I think Colorado and New Mexico, primarily.
Aaron: What geographies is Maggie’s farm currently in?
Bill: We’re in southern Colorado. We don’t go into the plains of Colorado.
Aaron: So Colorado state only right now?
Bill: Yes. The wet mountain range is one of the mountain ranges that we are in. I’ve also cultivated in the La Plata mountain range.
Aaron: What specifically is it about that region that makes it conducive to cannabis growing?
Bill: I think if you get the right elevation and the right microclimates within those elevations, and you have the number of sunny days that Colorado offers in those areas – the intensity of the sunlight, and the cool nights – all those things are factors that coincide in these areas that we like to cultivate in.
Aaron: We’ve been talking about outdoor growth. Does Maggie’s do any indoor?
Bill: No. We’re essentially an outdoor farm. We do a little bit of breeding and we’ve got starter houses, greenhouses and hoop houses for that purpose. We’ve got one greenhouse that we use for some wholesale, but we are primarily outdoors.
Aaron: How do you go about selecting the genetics or evolving the genetics to meet your local environment, given that you’re growing outdoors?
Bill: A lot of it is honestly through testing and experimentation, historically. You just cultivate and harvest and see how the genetics performed, you know? You test, you take test inputs, you take customer reviews, and blind test results from the team and from the customers and you consider all those facts.
Aaron: Do you produce and use your own seeds or are you purchasing those?
Bill: We have done both. I think I’ve probably created somewhere north of 800 different strains at this point. So, we’ve got a huge seed bank. We do also buy from vendors and experiment with some of those genetics as well.
Aaron: Do you market your seeds in Colorado?“I don’t think that you can get anywhere near the terpene value indoors that you can outdoors.”
Bill: We do not.
Aaron: How did you settle on outdoor-only as the strategy for Maggie’s?
Bill: I believe outdoor is a premium flower. I think it has less impact on the earth. I think that there is a lot less pest mitigation than there is indoors, which makes it a healthier, cleaner product. You don’t have to mitigate the concentration of pests that you get in temperate climates of stagnant corners of greenhouses and buildings that you cultivate indoors. Therefore, you never get into the situations as often or as intensely, where you might have to really work hard at mitigating your pests. You can use the natural predator insects you can introduce and oftentimes they survive and they create their own climates and it’s a more natural, healthier product.
I don’t think that you can get anywhere near the terpene value indoors that you can outdoors. You just don’t have the value of the sun, which nothing compares to. You can hold up as many high wattage bulbs as you want and you don’t even pale to the sun and the effect that the sun has on the flower.
Aaron: What are some of the challenges of growing outdoors that you see frequently?
Bill: You have to be nimble. You can’t rely completely on a schedule. You’ve got to be able to shift around in your planting days and your harvest dates.
You’ve obviously got to be on your toes all the time for weather changes. Higher humidity years can tend to bring more insects or pests. Some years you’ve got higher winds than other years. This year, we had a snowstorm on September 9, which left nine inches of heavy wet snow on one of our farms. So, you’ve got to be nimble, very proactive and ready for those kinds of weather events that happen in very short notice.
Aaron: We mentioned Clean Green Certified® briefly. Can you explain more about the Clean Green certification and why that’s an important thing for you at Maggie’s?
Bill: The choice to become Clean Green Certified® was really an effort to validate the organic process that we have. We vetted out what we believe was and still is the premier, organic criteria certification endorsement in the market for cannabis. To this day, they really do an ethical, vetting-out process whereby if you fail the parts of any of the soils that are sent to federal-licensed labs, you do not get your endorsement. The owner of Clean Green also had a mother company that was an endorser of other agricultural products such as coffee, wheat and dairy.
Aaron: How would you compare Clean Green Certified® to USDA Organic?
Bill: Identical. When the federal government legalizes, we are poised to automatically convert to a USDA Organic certification and endorsement. The processes the founder and owner of Clean Green uses to test cannabis is the same process used to test other agricultural industries. For plants, he takes random samples of soils throughout a cultivation field and sends them to a federal-licensed lab where they test for impurities.
Aaron: Did you decide to get your Clean Green certification due to pulling from the market, or is this more something you decided to do internally as Maggie’s Farm?
Bill: I decided to do this internally. I wanted to be recognized for all of our organic efforts and I wanted to let people know that we have a safe product that doesn’t have synthetics in it. Even to this day, a lot of people in Colorado unlike the coastal states like maybe California are still pretty unaware of a Clean Green certification or even the fact that there is an organic process for cannabis or marijuana. So, it’s really just to let our customers know that there is value in a safe, healthy choice for them.
Aaron: What kind of products do you create at Maggie’s farm?
Bill: We grow flower. We are also a big producer of a very high-quality pre-roll. We are developing promoted products as well.
Aaron: Do you do fresh frozen?
Bill: We do some, yes.
Aaron: Are you selling direct to the dispensary or to manufacturers?
Bill: We finally had produced some excess. So, we started wholesaling flower this year and lots of high-quality shake for concentrates to concentrate makers. Our customer is typically a little more of a mature customer. I don’t want to say necessarily older, but I think we probably do hit a little bit of a higher, more experienced, health-conscious, connoisseur customer.
Aaron: Can you give me an idea of some of the regulatory challenges in Colorado that you’ve faced in the past or are facing today?
Bill: The perpetual change of regulation has been a challenge. Being a competent operator in cannabis means getting used to the change and having the resources to be nimble with compliance. We haven’t had common problems such as metals, mold or mildew issues. However, we have had some hardware issues, which required us to change cameras along with other technical intricacies.
Aaron: How many acres do you have?
Bill: We have about 30 acres of secured premise cultivation.
Aaron: Is that all managed in-house or sublet?
Bill: It’s all managed and operated exclusively by Maggie’s Farm.
Aaron: What’s next for Maggie’s Farm? What are you excited about?
Bill: We want to continue to put a higher scale of a very healthy, quality, value flower out there and to be able to offer that to more states initially states that are within our region and eventually states across the US. Also, we will continue to do our best to meet the growing demand for healthier choices in general.
Aaron: Lastly, what are you personally interested in learning more about?
Bill: How we can continue to be as earth-conscious as we can be? How we can continue to look for ways to give back to our communities? How we can continue to operate as a view of made in the USA and to try to just support local regional and national products and vendors? Just how to be more aware and always look for opportunities for self-improvement.
Aaron: That concludes the interview, thank you Bill!
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
