Tag Archives: business

The New ISO/IEC 17025:2017: The Updated Standard

By Ravi Kanipayor, Christian Bax, Dr. George Anastasopoulos
No Comments

As state cannabis regulatory frameworks across the country continue to evolve, accreditation is becoming increasingly important. Because it provides consistent, turnkey standards and third-party verification, accreditation is quickly emerging as an important tool for regulators. For cannabis testing laboratories, this trend has been especially pronounced with the increasing number of states that require accreditation to ISO/IEC 17025.

As of 2017 there were nearly 68,000 laboratories accredited to ISO/IEC 17025, making it the single most important benchmark for testing laboratories around the world. ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests including sampling. It covers testing performed using standard methods, non-standard methods and laboratory-developed methods. It is applicable to all organizations performing tests including cannabis labs. The standard is applicable to all labs regardless of the number of personnel or the extent of the scope of testing activities.  Developed to promote confidence in the operation of laboratories, the standard is now being used as a key prerequisite to operate as a cannabis lab in many states.

There are currently 26 states in the United States (also Canada) that require medical or adult-use cannabis to be tested as of February 2019. Of those states, 18 require cannabis testing laboratories to be accredited – with the vast majority requiring ISO/IEC 17025 accreditation. States that require testing laboratories to attain ISO/IEC 17025 accreditation represent some of the largest and most sophisticated cannabis regulatory structures in the country, including California, Colorado, Maryland, Massachusetts, Michigan, Nevada and Ohio. As a consequence, many cannabis testing laboratories are taking note of recent changes to ISO/IEC 17025 standards.

ISO/IEC 17025 was first issued in 1999 by the International Organization for Standardization. The standard was updated in 2005, and again in 2017. The most recent update keeps many of the legacy standards from 2005, but adds several components – specifically requirements for impartiality, risk assessment and assessing measurement uncertainty. The remainder of this article takes a deeper dive into these three areas of ISO/IEC 17025, and what that means for cannabis testing laboratories.Objectivity is the absence or resolution of conflicts of interest to prevent adverse influence on laboratory activities.

Impartiality

ISO/IEC 17025:2005 touched on an impartiality requirement, but only briefly. The previous standard required laboratories that belonged to organizations performing activities other than testing and/or calibration to identify potential conflicts of interest for personnel involved with testing or calibration. It further required that laboratories had policies and procedures to avoid impartiality, though that requirement was quite vague.

ISO/IEC17025:2017 emphasizes the importance of impartiality and establishes strict requirements. Under the new standard, labs are responsible for conducting laboratory activities impartially and must structure and manage all laboratory activities to prevent commercial, financial or other operational pressures from undermining impartiality. The definitions section of the standard defines impartiality as the “presence of objectivity.” Objectivity is the absence or resolution of conflicts of interest to prevent adverse influence on laboratory activities. For further elaboration, the standard provides similar terms that also convey the meaning of impartiality: lack of prejudice, neutrality, balance, fairness, open-mindedness, even-handedness, detachment, freedom from conflicts of interest and freedom from bias.

To comply with the new standard, all personnel that could influence laboratory activities must act impartially. ISO/IEC 17025:2017 also requires that laboratory management demonstrate a commitment to impartiality. However, the standard is silent on how labs must demonstrate such commitment. As a starting point, some cannabis laboratories have incorporated statements emphasizing impartiality into their employee handbooks and requiring management and employee training on identifying and avoiding conflicts of interest.

Risk Assessment

Both the 2005 and 2017 versions contain management system requirements. A major update to this is the requirement in ISO/IEC 17025:2017 that laboratory management systems incorporate actions to address risks and opportunities. The new risk-based thinking in the 2017 version reduces prescriptive requirements and incorporates performance-based requirements.

Under ISO/IEC 17025:2017, laboratories must consider risks and opportunities associated with conducting laboratory activities. This analysis includes measures that ensure that:

  • The lab’s management system is successful;
  • The lab has policies to increase opportunities to achieve its goals and purpose;
  • The lab has taken steps to prevent or reduce undesired consequences and potential failures; and
  • The lab is achieving overall improvement.

Labs must be able to demonstrate how they prevent or mitigate any risks to impartiality that they identify.To comply with ISO/IEC 17025:2017, labs must plan and implement actions to address identified risks and opportunities into management systems. They must also measure the effectiveness of such actions. Importantly, the standard requires that the extent of risk assessments must be proportional to the impact a given risk may have on the validity of the laboratory’s test results.

ISO/IEC 17025:2017 does not require that labs document a formal risk management process, though labs have discretion to develop more extensive methods and processes if desired. To meet the requirements of the standard, actions to address risks can include sharing the risk, retaining the risk by informed decision, eliminating the risk source, pinpointing and avoiding threats, taking risks in order to pursue an opportunity, and changing the likelihood or consequence of the risk.

ISO/IEC 17025:2017 references “risks” generally throughout most of the standard. However, it specifically addresses risks to a laboratory’s impartiality in section 4.1. Note, the new standard requires that labs must not only conduct activities impartially, but also actively identify risks to their impartiality. This requirement is on-going, not annually or bi-annually. Risks to impartiality include risks arising from laboratory activities, from laboratory relationships, or from relationships of laboratory personnel. Relationships based on ownership, governance, shared resources, contracts, finances, marketing, management, personnel and payment of a sales commission or other inducements to perform under pressure can threaten a laboratory’s impartiality. Labs must be able to demonstrate how they prevent or mitigate any risks to impartiality that they identify.

Assessing Measurement Uncertainty With Decision Rules

ISO/IEC 17025:2005 required (only where necessary and relevant) test result reports to include a statement of compliance/non-compliance with specifications and to identify which clauses of the specification were met or not met. Such statements were required to take into account measurement uncertainty and if measurement results and uncertainties were omitted from the statement, the lab was required to record and maintain the results for future reference.

ISO/IEC 17025:2017 requires similar statements of conformity with an added “decision rule” element. When statements of conformity to a specification or standard are provided, labs must record the decision rule it uses and consider the level of risk the decision rule will have on recording false positive or negative test results. Like the 2005 version, labs must include statements of conformity in test result reports (only if necessary and relevant- see 5.10.3.1 (b)). Now, test result reports on statements of conformity must include the decision rule that was employed. 

Moving Forward

Because many states require ISO/IEC 17025 accreditation for licensing, cannabis testing labs across the country would be well advised to closely monitor the implications of changes in ISO/IEC 17025:2017 related to impartiality, risk assessment and measurement uncertainty. If you run a cannabis testing lab, the best way to ensure compliance is education, and the best place to learn more about the new requirements is from a globally recognized accreditation body, especially if it is a signatory to the International Laboratory Accreditation Cooperation (ILAC) for testing laboratories, calibration laboratories and inspection agencies.

References

Facts & Figures

ISO/IEC 17025:2005: General requirements for the competence of testing and calibration laboratories

ISO/IEC 17025:2017: General requirements for the competence of testing and calibration laboratories 

PerkinElmer Awarded Five Emerald Test Badges

By Aaron G. Biros
1 Comment

According to a press release published today, Emerald Scientific awarded PerkinElmer five badges for The Emerald Test, a bi-annual Inter-Laboratory Comparison and Proficiency Test (ILC/PT) program. Awarding the badges for Perkin Elmer’s instruments and testing methods affirms their ability to accurately detect pesticides, heavy metals, residual solvents, terpenes and potency in cannabis.

According to Greg Sears, vice president and general manager of Food, Chromatography & Mass Spectrometry, Discovery & Analytical Solutions at PerkinElmer, they are the only instrument manufacturer to receive all five accolades. “To date, PerkinElmer is the only solutions provider to successfully complete these five Emerald Scientific proficiency tests,” says Sears. “The badges underscore our instruments’ ability to help cannabis labs meet the highest standards available in the industry and effectively address their biggest pain point: Navigating diverse regulations without compromising turnaround time.”

The instruments used were PerkinElmer’s QSight 220 and 420 Triple Quad systems, which are originally designed for accurate and fast detection/identification of “pesticides, mycotoxins and emerging contaminants in complex food, cannabis and environmental samples,” reads the press release. They also used their ICP-MS, GC/MS and HPLC systems for the badges.

PerkinElmer says they developed a single LC/MS/MS method using their QSight Triple Quad systems, which helps labs test for pesticides and mycotoxins under strict regulations in states like California and Oregon. They performed studies that also confirm their instruments can help meet Canada’s testing requirements, which set action limits nearly 10 times lower than California, according to the press release.

Cannabis Facility Construction Retrofitting Buildings for Processing, Growing

By Aaron G. Biros
1 Comment

Cannabis Facility Construction (CFC), based in Northbrook, Illinois, has taken a rather unique approach to facility design and building in the cannabis market. According to a press release published today, the company takes unused buildings and remodels them into facilities designed specifically for the cannabis industry.

A 5,200 square foot CFC-built dispensary in Morris, Illinois.

CFC, which is a division of Mosaic Construction, retrofits unused, abandoned buildings, turning them into cannabis cultivation and processing facilities, as well as dispensaries. According to that press release, they have developed buildings on 28 different facilities to date, covering over 328,970 square feet.

The Litchfield, Illinois cultivation facility, remodeled by CFC

According to Ira Singer, Principal at CFC, they provide a turnkey service for licensed operations to retrofit old buildings, including staying compliant with state cannabis regulations. “Since the cannabis industry is emerging as a growth market, investors need to appreciate there is an art and a science to converting raw materials of cannabis and finished products,” says Singer. “CFC’s medicinal processing centers are outfitted to master the product in all its forms and uses, and to meet all state regulations and local fire and safety codes. Its three-stage approach encompasses its Design-Build expertise for processing facilities; construction management; security infrastructure and planning; and permitting and compliance support.”

For example, they helped investors from Highland Park, Illinois take an unused building in Garden City, Michigan and convert it into a 48,000 square foot cultivation, processing and dispensary facility. CFC also does business with Greenhouse, a medical cannabis company with facilities throughout Illinois.

For more information and to see some of their work, check out their portfolio here.

Product Release: Illumitex Launches HarvestEdge XO Light Fixtures

By Aaron G. Biros
No Comments

According to a press release yesterday, Illumitex, an industry-leading LED lighting manufacturer and digital horticulture company, announced the release of their newest lighting technology, the Illumitex HarvestEdge Extra Output (XO) LED Horticultural Fixture. This light fixture is the latest advancement of their LED technology, which they claim can help growers maximize their yield considerably.

The HarvestEdge Extra Output (XO) LED Horticultural Fixture

The fixture comes with a 0-10 dimming capability and proven Wet Rating, meaning it is designed and proven to operate normally in a high-humidity environment. Debuted during the NCIA Seed to Sale Show in Boston, MA on February 12th, the company says the XO LED is the first true 1:1 replacement for high pressure sodium (HPS) lights, consuming about 36% less energy.

We caught up with a few members of the Illumitex team at the conference to find out more about the technology and its applications. According to John Spencer, CCO/EVP of Sales & Marketing at Illumitex, their technology has been used by hundreds of grow operations over the past 8 years. “This light was designed with a higher light output for greenhouses, particularly in Canada where the mounting heights are upwards of 7 meters,” says Spencer. “We are minimizing shadowing in the greenhouse, giving growers the opportunity to supplement their sunlight appropriately.” He says they are specifically designed with commercial scale use in mind.

According to Yan Ren-Butcher, Ph.D., Director of Horticulture Science at Illumitex, the light has the highest efficacy on the market right now. “We designed the specific wavelengths and best red, blue and green ratios optimal for photosynthesis,” says Ren-Butcher. “This product launch is based on years and years of experience in horticultural applications, our knowledge in the field of cannabis cultivation and the latest in LED technology, with the highest efficacy in the industry to date.”

Wayland Group’s GMP Certification Begins To Clarify German Cultivation Scenarios

By Marguerite Arnold
No Comments

Wayland Group just announced that they received GMP (good manufacturing practices) and GDP (good distribution practices) certification for their Ebersbach facility near Dresden, Germany. The plant already produced 2,400 kg of CBD isolate last year.

The certifications give Wayland the right to sell directly into German and other EU markets, and more significantly, the ability to store bulk product domestically.They have, by far, the largest cultivation site now legal in the country, with distribution to not only German pharmacies, but Europe beyond that.

Wayland is also widely believed to have applied for the much-stalled German cultivation bid. With per-gram production prices at Ebersbach cited at 1.34 euros, this certainly also sends an interesting message about who might win what in the bid, and where the price of cannabis might be headed.

Currently, cannabis is being sold to pharmacies in Germany at prices almost twice the retail price per gram in Canada. In turn, this means that the “retail” price of floss (flower) is running much higher than it is in more established markets (read Canada and of course the U.S.). Point of sale prices in Germany, for example, run between $2-3,000 per month per user. That is an era that is clearly also now coming to an end.

The Cultivation Bid

With the news of Wayland’s certifications, comes an almost certainty that they will become finalists in the pending cultivation bid in Germany. Why? They have, by far, the largest cultivation site now legal in the country, with distribution to not only German pharmacies, but Europe beyond that.

If Bedrocan was the incumbent favorite to win the majority of the licenses handed out to any one firm (especially given the recent increase in cannabis allowed to be sold into Germany across the Dutch border), this places Wayland in a strong second. If Bedrocan is not involved in the bid, this news might indicate that Wayland might be the largest winner in German cultivation licenses this time around.

The plot indeed thickens.

Prices: In General, Across Europe

The firm will be providing product, no matter what the outcome of the bid, at a production price, which is in line with the widely estimated requirements of the bid itself. Winning firms must also be able to provide pricing that is competitive to each other. It is unclear where the government will set that floor, but all medical cannabis sold in Germany after that, will then be competing with that price.

Could it be that the reference price of cannabis, in other words, has just been indirectly announced with the Wayland certifications?

Then there is this wrinkle. Given that production in Germany is more expensive than other countries in Europe (see Portugal, Spain and Greece in particular), the difference in labor costs may still outweigh the costs of shipping across the continent. Or, as the market gets going, it may not. Regardless, in a country like Germany where drug prices are routinely pre-negotiated in bulk by the government, cannabis prices will start to be regulated in a way they have not in other places, notably Canada. This means that heady visions of “mark-ups” to meet a so far unmet demand are also probably not in the cards, although government supported cannabis exports might be.

Insurance “Brands” And Bulk Buys Ahead?

Then there is this intriguing wrinkle. German “public” insurance patients (in other words 90% of the population) are not always free to choose the products they use. Why not? Beyond bulk purchases by the government, insurance companies are also allowed to enter into bulk contracts with some providers, namely medical equipment manufacturers. This is sort of the same situation as visiting an “in network” provider in the United States. In other words, the equipment is free (or vastly cheaper) to the patient if the selected brand is chosen.

Could cannabis go the same route?

german flag
Photo: Ian McWilliams, Flickr

At this juncture, that is unclear. Dronabinol, the only widely available source of cannabinoids in the country until 2016, is considered more of a generic than “name brand.” So far, neither it nor Sativex were pre-negotiated drugs. This was also for a very simple reason. There were only 800 registered patients in Germany until that year. That is far under the “orphan drug” category, which in Germany is 10,000 people. At this point, there are already much higher patient numbers (some cite as many as 79,000), with the majority of treatment going to patients with chronic pain.

By definition, this means that cannabis prices here will continue to be negotiated with little room for high mark-ups as the market consolidates. The more patients there are, the more attention will be paid to ensuring that the drug becomes affordable- not just to patients, but also insurers.

There is zero chance that the government will allow German public healthcare to be bankrupted over this still stigmatized plant, no matter how medically efficacious it is.

Germany and Israel at this point, have the longest established insurance mandate for cannabis- and in the German situation, this is now just two years old. The British NHS just announced that cannabis would be covered, with Luxembourg and Poland now also in the mix. However, the place of the insurance community in this debate is also a factor to be considered into the entire conversation as it unfolds here, beyond efficacy.

Dutch insurers in fact, stopped covering the drug almost as soon as Germany announced its own experiment.

It is unlikely that Wayland is unaware of such realities. The company has former executives from AOK on its German board. AOK is one of the largest statutory health insurers in Germany and one on the front line of cannabis reimbursements for the last two years.

Mission Mountain Laboratories: The First Accredited Cannabis Testing Lab in Montana

By Aaron G. Biros
1 Comment

Last week, Mission Mountain Laboratories (MML), based in Arlee, Montana, received their ISO/IEC 17025:2005 accreditation from Perry Johnson Laboratory Accreditation (PJLA). This marks the first cannabis testing lab in Montana to get ISO 17025-accredited.

According to a PJLA client spotlight, MML is a female-owned business with two generations of family-run business experience. Before they took the plunge into medical cannabis testing, MML started out testing in public water systems in Montana. They have since expanded their regimen of testing services to offer a host of other services, but most recently adding compliance testing for medical cannabis and cannabis related products.

The Mission Mountain Labs team

According to Kimberly Nuccio, president of MML, this accreditation allows them to grow their business considerably. “Accreditation has opened greater opportunities for business growth by attracting larger companies that are looking for reassurance that a laboratory follows the highest testing standards,” says Nuccio. “Being an accredited lab gives them that added confidence necessary when deciding which lab to partner with for their testing needs. Mission Mountain Laboratories is the first Medical Marijuana Lab to achieve ISO accreditation in the state of Montana, and PJLA accreditation helped expand us into the new arena of Medical Marijuana compliance testing.”

MML has plans to expand their operations greatly, including opening a location in Florida by 2020. “We are aware of the increased and urgent demand for quality Cannabis compliance testing nationwide and are currently working on a 3-year plan to expand into Florida and several other states to fill this void,” says Nuccio. “These new locations will also be equipped to provide full service testing for Nutraceuticals, Food manufacturing, and Environmental businesses.”

8 Mistakes Businesses Make When Managing Product Labels: Part 2

By Rob Freeman
No Comments

Editor’s Note: This article contains the last four common labeling mistakes that businesses can make. The previous four mistakes were published last week here. 

Mistake #5: Planning Just-In-Time Inventory Too Close to Production; Effecting On-time Deliveries

Using JIT (Just-In-Time) management is common throughout North America. JIT involves manufacturers and suppliers trying to minimize, or even eliminate, their inventory. This approach relies on suppliers to deliver materials just before production is started. When this method is done properly, it is a very efficient way to minimize production costs, but when companies do not prepare for a “crisis” situation, they will have nothing in stock to fall back on.

Minimizing inventory costs is always a challenge. It’s a never-ending contradiction trying to maintain low inventory costs while factoring the percentage of potential new growth. Calculations can fluctuate from month to month, especially when industries rely on commodity ingredients or are impacted by sudden regulatory changes like we see with the cannabis, food packaging, and health supplement markets. Front runners in these markets practice minimizing their product label inventories, but their needs might quickly change from one day to the next. They do not want to place a one-time annual label order for each SKU. If an ingredient runs out of supply or a regulatory change affects their production profile, they would be sitting on unusable labels that will go to waste.

Best Method Approach: Think in terms of what the bottom line effect will be when factoring how you should manage your inventory. Try not to reduce your inventory too low. This could cause your company to experience shipping delays when complications arise with suppliers or quality control. You should have at least one-to-two production cycles worth of inventory available for those “crisis” moments.

Rob Freeman, author of this article, is the Director of Business Development and Marketing at Label Solutions Inc.

This backup inventory can also help reduce paying for excessive rush fees. Sometimes businesses can experience unexpected demand for a product, especially when companies consolidate production plants, acquire other companies, or have a new product launch. Supplier material shortages can greatly impact internal quality control and delay delivery times. Building a strong business relationship with your label provider is key to working around business demands and potential problems; which in turn, will help your label provider ship on-time deliveries so your production deadlines are met.

Mistake #6: Selecting the Lowest Price, But Approving the Wrong Materials for Your Product Needs

Sometimes clients buy the lowest priced labels without their procurement department knowing what the label specification requirements should be. It’s always a good business practice to shop for the best price, but it is equally as important to make sure you understand what you’re buying for that price.

Label providers vary on the quality of work they do, value-added services they offer, their production expertise, and the quality of material they use. Additionally, the hidden potential costs to lowest price shopping is that once the construction of those labels fail, it could cost you much more than a simple reorder.

Best Method Approach:Establish clear and concise procedures so your production team can forward the necessary criteria for your procurement department to have during the buying process.

brands want strong, eye-catching labels that stand out online, on the shelf, and/or on the retail floor. On a separate note, some businesses and manufacturers don’t care how long their brand and contact information remains on their product after the purchase. This gives them the flexibility to buy extremely low-quality material, but the outcome is a much lower brand awareness reminder at the end of the product’s use. But if your business model is such that you sell a “one-time use” product and all that you need is the label to survive through the POS, then the cheapest materials and lowest price might be your best solution.

In most cases, brands want strong, eye-catching labels that stand out online, on the shelf, and/or on the retail floor. Manufacturers want their labels to remain on their product, so their customers have a reminder of what they need to buy again or the ability to reread product use instructions and label warnings. Even if you don’t require the most expensive materials, using good quality, durable substrates and inks is always a solid approach.

Mistake #7: Not Preparing for Oil Based Products

One of the most popular products expected in retail for 2019 will be essential oils and/or CBD infused oil ingredients in foods, drinks, and wellness supplements. One of the most common mistakes relating to oil-based products is that entrepreneurs often forget that oils can soak into paper substrates and/or disperse certain inks, even when laminated.

Whether your product is on display in retail, or being sampled at a trade show, the last thing you want to be concerned about is your product name and contact information smearing or washing out. Even the smallest drop of oil can seep into a paper label and spread the ink to the point that you’ll have your own little tie-dye action on the label. That might look cool to some, but you lose your branding and the perception with most retail customers will be that your company is either cheap or is not professional.

Best Method Approach: There are affordable films such as polypropylene materials that will allow you to print the look you want while still protecting your branding and product. From cooking oils to industrial grade oils, the approach is the same but may require different types of films and ink solubility, so each bottle and container has oil resistant labels that maintain a professional look.Whenever one of our clients launch a new product or changes the intended surface conditions for label application, testing the label is always extremely important

If you’re feeling overwhelmed, remember that you don’t need to select all the label materials on your own. Your label provider should help you settle on the best solution.

Mistake #8: Not Properly Testing New Labels and New Product Surfaces

This is one of the most common and overlooked issues. Whenever one of our clients launch a new product or changes the intended surface conditions for label application, testing the label is always extremely important. This is especially critical when dealing with high quantity orders.

Best Method Approach: Testing parameters should be outlined by you and your label provider so both parties understand how long the label and the ink consistency should remain on the surface after purchase and use of product. There are wide variations of testing, so it will depend on the type of product and the intended industry.

For example, testing hand-applied, durable labels on powder coated metals for the boat and trailer industry require a completely different testing method compared to tests for typical food and beverage products that are machine applied. Usually, with uniform container products like food clamshell packaging, beverage cans, and supplement jars, all you will need to do is make sure to test labels on your production line, so your team is confident with the results.

Final Thoughts

In summary, preventing just one of these mistakes can yield huge cost savings no matter if your company is a start-up or a large corporation. Even if these eight common mistakes do not directly apply to your own issues, hopefully the “Best Methods” approach will give your company ideas about how you can prepare for future product releases, reduce product label issues, and improve your own quality control metrics.

If you have topics relating to product labeling that you would like me to discuss, please write to info@easylabeling.com. Be sure to save this article and forward it to your peers for future reference.

WHO Makes Noise About Cannabis “Rescheduling”

By Marguerite Arnold
No Comments

At this point in the end of prohibition, not even the United Nations (UN) or the World Health Organization (WHO) are immune to the great green wave sweeping the planet. Yet, lest anyone get too optimistic about developments at the nose bleed level of international drug reform, the newest round of headlines regarding “WHO cannabis reform” is hardly cause for celebration.

The Story At The International Level So Far

In documents obtained by Cannabis Industry Journal last fall, it appeared that cannabis reform of the serious kind had caught the eye of senior leaders at the WHO. Further, it also appeared that some kind of decisive action or declaration would be forthcoming by the end of the year.

Yet as reported at the end of January, such decisions appear to be headed for a tortoise speed approvals track. Yes, it appears that CBD will probably be descheduled, and from both the hemp and cannabis perspective. That should be good news to many who are caught in a raft of international standards that are confusing and all over the place on a country-by-country level. However, this will not be much of a boon to the industry in Europe, in particular, where the discussion is less over CBD but the source of it, and how distillates are used. From this perspective, the draft WHO documents will make no difference, except perhaps to speed the acceptance of CBD, and create clearer regulations around it.

On the THC front, the WHO appears to do nothing more than move cannabis squarely into international Schedule I territory. More interesting of course, is the intent of international regulators to keep cannabis very much in uncertain status while moving “pharmacized” versions of the same into Schedule III designation.

What Does The Opinion of The WHO Really Mean?

What this means is also still unclear except that those who want to sell to regulated medical and nonmedical markets have to get their products (whatever those are) registered as medicine or a legitimate consumer product in every jurisdiction and eventually at a regional level (see Europe). That is clearly underway right now by both the big Canadian and emerging Israeli entities in the market as well as savvy European players in both verticals. That said, it is also a game that is about to create a very interesting market for those who are able to produce cheap, but high-grade oils in particular.

What Does This Mean For The Future Of Flower?

On the medical front, Germany became the third country in the world to consider reimbursing flower via national healthcare. Of the three who have tried it to date so far (and it is unclear what Poland will do at this point longer term), Israel is inching away and Holland nixed the entire cannabis covered by insurance conversation at the same time Germany took it on. Where that plays out across Europe will be interesting, especially as the cost of production and end retail cost continues to drop. And doctor education includes information about “whole plant” vs. pre-prescribed “dosing” where the patient has no control. The reality in the room in Europe right now is that this drug is being used to treat people with drug resistant conditions. Dosing dramas in other words, will be in the room here for some time to come as they have in no other jurisdiction.

european union statesBeyond dosing and control issues that have as much to do with doctors as overall reform, flower is still controversial for other reasons. One, it is currently still being imported into Europe from highly remote and expensive import destinations. That will probably change this year because of both the cultivation bid and Israel’s aggressive move into the middle of the fray as well as widely expected ex-im changes that will allow imports from countries throughout Europe. However, in the meantime, this is one of the reasons that flower is so unpopular right now at the policy and insurance level. The other is that pharmacists in Germany are allowed to treat the flower as a drug that must be processed. In this case, that means that they are adding a significant surcharge, per gram, to flower because they grind it before they give it to patients.

How long this loophole will exist is unclear. However, what is also very clear is that oils in particular, will play a larger and larger role in most medical markets. Read, in other words, “pharmaceutical products.”

For this reason, the WHO recommendations, for one, are actually responding to unfolding realities on the ground, not leading or setting them.

Setting A Longer-Term Date For Widespread Recreational Reform

This conservative stance from the WHO also means, however, that in the longer run, individual country “recreational reform” particularly in places like Europe, will be on a slower than so far expected track. There are no countries in the EU who are willing to step too far ahead of the UN in general. That includes Luxembourg, which so far has made the boldest predictions about its intentions on the recreational front of any EU member. However, what this also may signal is that the UN will follow the lead set by Luxembourg. Even so, this legitimately puts a marker in the ground that at least Europe’s recreational picture is at least five years off.

In the meantime, the WHO recommendations begin to set international precedent and potentially the beginnings of guidelines around a global trade that has already challenged the UN to change its own regulations. In turn, expect these regulations to guide and help set national policy outside a few outliers (see Canada, Uruguay and potentially New Zealand) globally.

Bottom line, in other words? The latest news from the UN is not “bad” but clearly seems to say that cannabis reform is a battle that is still years in the making. That said, from the glass is half full perspective, it appears, finally, there might be the beginning of a light at the end of the international tunnel of prohibition.

Canadian Companies Continue European Cannabis Moves

By Marguerite Arnold
No Comments

There is a lot of European news afoot from the big public Canadian companies between all the headlines about Israel. Namely, established cannabis companies in the market already continue to shore up their presence across multiple member EU states.

What is at stake? Establishing some kind of European foothold in an environment where licensing and production costs will not bust the bank- and what will be the first government-set, pre-negotiated bulk price for medical cannabis flower. For all the high-flying news of even hundred million-dollar (or euro) investments, right now the biggest hunt is on for ways to trigger sales figures that continue to grow steadily in the customer column.

There is also a dawning realization that prices are going to start stabilizing if not falling after the German government finalizes its selection of bid winners.european union states

As a result of all of this, to compete against each other and streamline distribution and supply chain costs, the larger Canadian companies in the market are clearly angling to set up efficient distribution networks- even if that means buying pieces of them one country and property at a time.

How well that will work in the longer run remains to be seen- but it is a play that is starting to show up in other European developments (from the Israeli side). That said, the latest news of the big guys in the field make sense within this context, if none other.

Canopy Growth Announces UK and Polish Moves

Spectrum Cannabis, the European-based medical brand of Canopy Growth chalked two more achievements off its Euro “to do list” in January. At the beginning of the month, Spectrum announced it was preparing to enter the UK market via the creation of a joint venture with Beckley Canopy Foundation, Spectrum Biomedical.

In Poland, the company also announced the successful shipment of its high-THC whole flower “Red No.2.” The Polish government began allowing sales late last year.

Neither development however should be a surprise to those watching the strategy of either Canopy or for that matter several other public Canadian cannabis companies. Aurora, for example, announced its first successful shipment into the country on the same day that the Polish government changed the law. On the British side, the combined forces of changing the regulatory scheduling of cannabis and allowing the drug to be dispensed by prescription have certainly changed the game on some levels. Brexit is about to play havoc with most imported products, and cannabis is no exception to this.Canopy_Growth_Corporation_logo

In this sense, the challenges facing both British and Polish patients right now are also fairly analogous. Importing is the only way to get the drug to patients, and the cost of import is also prohibitively high for most. Then of course, there is actual approval beyond that, which is also a problem everywhere cannabis has become legal.

While both developments of course, are good news for the company, this does not mean that the initial going will be easy or smooth for any company, including one as skilled at strategic market entry in core countries across the continent for the last several years as Spectrum has reliably proven to be.

Green Organic Dutchman Gets Cultivation License In Denmark

TGOD has now gone where other Canadian Euro cannabis players have gone before– namely it has joined the national trial program and several other Canadian cannabis companies before it (see Spectrum Cannabis for one) in Denmark.

Why are so many public cannabis companies attracted to the tiny country? The first is that the country, like Switzerland, in fact, is not as bound by EU rules as say, Germany and France. It can “experiment” in ways that are notably different from its neighbors.

As a result of this and a change in the law that began a multiyear trial to experiment with regulation and medical efficacy, cultivation licenses are also easier to obtain than in other places. There are also other plusses to establishing a presence in the country if not the continent including a strong social care system, and a research environment that promises to produce great results on the medical efficacy discussion continent wide.

Liberty Health Sciences Receives Second GMP Certification

By Aaron G. Biros
2 Comments

According to a press release sent out last week, Liberty Health Sciences announced that the British Standards Institution (BSI) awarded the Good Manufacturing Practices (GMP) certification for a facility located in Gainesville, Florida. The certification covers their 10,000 square foot medical cannabis manufacturing facility, where much of their extraction and processing takes place. Liberty also operates a large cultivation space at the same campus.

“it demonstrates our commitment to producing the highest quality and safest products possible for our customers throughout the state of Florida”According to Jessica Engle, director of regulatory compliance for Liberty, they actually did much more than just a GMP certification, including designing a HACCP plan. “In addition to GMP compliance, Liberty has gone above and beyond the DOH requirements to create a fully operational HACCP (Hazard Analysis Critical Control Point) plan that helps ensure the products we produce are safe for consumers,” says Engle. “The basis for HACCP is a scientific approach to preventative risk analysis. Every time a process changes, equipment changes, or raw material changes, our HACCP team meets to identify potential physical, chemical, and microbiological risks. Preventative measures are then put into place to help reduce the likelihood of the contamination hazard from ever occurring.”

Florida’s regulations on medical cannabis producers and processors actually require a form of certification demonstrating proper food safety protocols. “Within 12 months after licensure, a medical marijuana treatment center must demonstrate to the department that all of its processing facilities have passed a Food Safety Good Manufacturing Practices, such as Global Food Safety Initiative or equivalent, inspection by a nationally accredited certifying body,” reads Rule 9 in the 2017 Florida Statute. Edibles producers in Florida “must hold a permit to operate as a food establishment pursuant to chapter 500, the Florida Food Safety Act, and must comply with all the requirements for food establishments pursuant to chapter 500 and any rules adopted thereunder.” The rules also lay out requirements for packaging, dosage and sanitation rules for storage, display and dispensing of edible products.

Also according to the press release, the company is expecting to grow immensely, saying they will add an additional 160,000 square feet of cultivation space at their Gainesville campus. George Scorsis, CEO of Liberty Health Sciences, says this GMP certification is an important landmark for them. “Receiving GMP certification at an additional facility is a major milestone for Liberty Health Sciences and it demonstrates our commitment to producing the highest quality and safest products possible for our customers throughout the state of Florida,” says Scorsis. “This achievement reflects the incredibly high standards we expect of ourselves and that our clients expect as a patient provider. We will continue to produce the highest quality products and exceed production standards that surpass even the most stringent regulatory requirements.”

Liberty has dispensaries, manufacturing facilities and cannabis education centers all over Florida. They have plans to launch a large number of locations in 2019, including ones in Boca Raton, Ft. Myers, Miami, Orlando and more.