According to a press release, EVIO Inc. announced recently that their Berkeley, California testing lab, C3 Labs, LLC doing business as EVIO Labs, received their ISO 17025 accreditation from Perry Johnson Laboratory Accreditation, Inc. (PJLA). EVIO Inc. acquired C3 Labs in January of this year, but C3 Labs is a well-established cannabis-testing lab that has been serving the Northern California industry since 2015.
The new and improved EVIO Berkeley laboratory
The accreditation and announcement were well-timed given the California regulatory changes that came on July 1, essentially requiring all cannabis products be tested for a range of contaminants before sold in a retail setting. The press release states EVIO Labs Berkeley should be well equipped to handle the surge in demand for testing services and is prepared for the new regulations.
Ron Russak, vice president of operations at EVIO Labs
According to Ron Russak, vice president of operations at EVIO Labs, they hope these regulations can give producers, retailers and consumers assurance that their products are safe. “EVIO is committed to upholding the highest standards throughout each step of the testing process and we are extremely pleased with the team’s hard work to reach this great achievement,” says Russak. “As the California cannabis industry evolves and state-mandated laboratory standards of operation prove vital, both clients and consumers will now have assurance that the results will be accurate and reliable.”
In June, we spoke with the EVIO team as they were gearing up for the July 1 phase-in of the new rules. They said they were expanding their capacity in anticipation of a higher demand for lab testing services, including adding more resources, equipment and personnel.
C-45 – or the Cannabis Act, passed overwhelmingly in the Senate by a vote of 52-29. Canadian Prime Minister Justin Trudeau has subsequently announced that the legislation will pass into law on October 17. The intent behind the legalization effort was to cripple organized crime and protect minors.
Only one other country in the world has taken such a dramatic step – Uruguay.
Now what?
The Medical Discussion Is Just Getting Underway
While legalization advocates and the increasingly corporate industry have everything to celebrate, this does not necessarily change the other conversation on the ground – in fact it only strengthens it.
Clearly this is a blow against prohibition still in force just south of the border in the U.S. This move alone is also likely to drive the debate in an environment where California and other states are clearly thumbing their noses at the federal government and proceeding apace with its own (and largest) U.S.-based marketplace.
However, there is another topic floating around this conversation. If cannabis is “harmless” enough for recreational use, its use for medical purposes has become the third rail that is now driving the conversation in other places – most certainly Europe.In the meantime, Canadian firms are in an unparalleled position to enter global markets (as they have already begun to do) and set the tone and debate.
Here, full legalization is absolutely off the table as policymakers and scientists begin to seriously contemplate integration of cannabinoids into comprehensive health systems. This week’s dramatic announcement in the UK to that effect, which came the same day as the Canadian vote, is one indication of that. Germany’s own cautious foray into medical use is another. The change in the law last year mandating public health insurance coverage of the same has created a population of 15,000 patients in the last year with many more lining up to obtain it. This population of patients will reliably use more cannabis every month than even the most dedicated recreational consumer.
What Comes Next?
Four and a half years after Colorado took the plunge, the world of cannabis acceptance has clearly changed – and for good.
But what is the next step? Clearly the pressure is now on in the U.S. to consider rescheduling to at least a Schedule II if not Schedule III drug. Marinol, the synthetic version of the drug, became a Schedule III drug in 2010. Epidiolex, GW Pharma’s drug derived from cannabis, just received FDA approval too. GW Pharma is the only British company allowed to develop cannabinoid medications. Let’s see how long that flag flies in the new commonwealth, with Canada fast behind the UK now as the two compete for the title of largest canna exporter. Globally.
The drug war, in other words, is finally coming to close for cannabisHowever full legalization – even in the United States and most certainly in Europe – is at least several years away.
In the meantime, Canadian firms are in an unparalleled position to enter global markets (as they have already begun to do) and set the tone and debate. How they will position themselves – as medical pharmaceutical or recreational companies – is another discussion that is still unfolding. Particularly because cannabis is a hybrid substance. And further, it is not entirely understood (nor has of course it been studied) where cannabis stops becoming a drug. If a consumer uses CBD, for example, as part of a wellness routine but also heads off a more serious condition, is the use of the plant “medical” or “recreational?”
These are all questions now on the table. But at least they are.
The drug war, in other words, is finally coming to close for cannabis. But the horizons beyond that, widely unexplored, promise blue ocean opportunities for decades to come. And not “just” in recreational use, but in the amazing worlds of science, technology and medicine that now lie within reach.
In a few short weeks, the regulations in California’s cannabis market will expand to include more laboratory testing. The previous exemption for selling untested product will be eliminated come July 1st, meaning that every product on dispensary shelves will have to be tested for a number of contaminants.
Pesticide testing, expanded residual solvent testing and foreign materials testing will be added come July 1st.
According to William Waldrop, chief executive officer and co-founder of EVIO Labs, the state is currently finalizing a revision to the existing emergency rules, which is designed to target the potential supply bottleneck situation. “To help alleviate the bottleneck, the state is eliminating the field duplicate test on every batch of cannabis or cannabis products,” says Waldrop. “This will give the labs additional bandwidth to process more batches for testing.” So one test per batch is the rule now and batch sizes will remain the same. This, of course, is contingent on the state finalizing that revision to the emergency regulations.
William Waldrop, chief executive officer and co-founder of EVIO Labs
In addition to that change, the state will expand the types of testing requirements come July 1st. New mandatory pesticide testing, expanded residual solvent testing and foreign materials testing are added in addition to the other tests already required.
With July 1st quickly approaching, many in California fear the rules could lead to a major market disruption, such as the previously mentioned bottleneck. Waldrop sees the elimination of duplicate testing as a preventative measure by the state. “It is a good move for the industry because it allows labs to test more batches, hopefully reducing the bottleneck come July,” says Waldrop. Still though, with only 26 licensed laboratories in the state as of March, testing facilities will have to meet higher demand, performing more tests and working with more clients.
EVIO Labs is preparing for this in a number of ways. They already have a lab in Berkeley and are working to expand their capacity for more analyses. In addition to their lab in Berkeley, the company is working to get three more locations operational as quickly as possible. “Right now, EVIO Labs is expanding through the identification of new market locations,” says Waldrop. “We have announced the acquisition of a facility in Humboldt and we are outfitting it for state-mandated testing. We have secured a location in LA, and licensing for LA just began as of June 1stso we are going through the local licensing process at this time. We are still moving through the licensing process for our facility in Costa Mesa as well.”
Labs will soon have to deal with higher demand, meaning more samples and more clients
“In the meantime, we have expanded capacity of personnel in our Berkeley facility to support our client base until these other locations come online,” says Waldrop. “We are refining our business, bringing on additional equipment and more resources.” While the rules haven’t been implemented yet, Waldrop says he’s seen an uptick in business with licensed operators requesting more testing for the new July 1st standards.
While some might feel a bit panicky about how the new standards could disrupt the market, Waldrop says his clients are looking forward to it. “Our clients are very happy with the proposed new rules, because it reduces the cost of testing per batch, which will inherently reduce wholesale costs, making cannabis more affordable for patients and recreational users.”
The stage is set: cannabis legalization is rolling out around the world. With legalization comes regulations and smart companies will adapt to make new requirements work for them. In the end, our shared goal (as industry, consumers and government) is the same: provide safe, high-quality, reliable products. This is where traceability comes in.
If a cannabis product isn’t safe (cannabis is vulnerable to the same kinds of hazards as most food products), the reputation of the entire industry suffers. Earning public trust is the first step toward favorable government regulations. With upcoming decisions that will decide taxation and distribution, it’s more important than ever that cannabis producers can react quickly if recalls should occur – and that means taking traceability seriously.
Comprehensive Traceability for Cannabis Means More Than Legality
A crucial key to producing safe and high-quality cannabis products is detailed traceability. Many states require cannabis businesses to use systems like Metrc, a technology that uses RFID tags to track cannabis from seed to sale to ensure nothing is diverted to the black market. However, Metrc focuses only on the chain of custody, not on the safety or quality of the product.
Ensuring a secure supply chain is only one piece of the cannabis puzzle. Public health hazards like toxic chemical contamination, mold growth and pathogenic contamination introduced by pests or improper employee handling need to be controlled in order to earn public trust and comply with regulations. State-mandated traceability systems don’t address these imperatives, so an effective safety technology that includes traceability, in addition to mandated systems like Metrc, is absolutely necessary to complete the cannabis picture.
Automation Technology Supports Cannabis Companies’ Growth and Helps With Audits
Cannabis professionals are aware of the regulatory scrutiny the industry is under and many have turned to automation technology to help stand up to this scrutiny, as well as collect and manage all the data necessary for compliance. Automating data collection pays off in several ways. For one, interconnected, real-time IoT technologies that are accessible to the entire facility 24/7 are giving cannabis businesses the tools they need to create the best possible products now, as well as providing them with the data they need to make their products even better. Since frequent audits are a part of the legalization transition, automation also makes preparing for audits and inspections a matter of minutes instead of days.
Ron Sigman, chief executive officer of marijuana compliance consulting firm Adherence Corp. and former investigator for the Marijuana Enforcement Division (MED) in Colorado, lists the most common violations for cannabis businesses that he found during more than 200 audits in an interview for Marijuana Business Daily. These violations include:
Metrc issues, especially accounting not matching inventory (too many plants or ounces of marijuana on the premises);
Security issues like lack of sufficient camera coverage;
Failure to upgrade licenses;
Improper or incomplete training of new employees.
Adopting safety and traceability concepts that the food industry developed over many decades can yield huge benefits for cannabis businessesA proper cannabis traceability technology mitigates these problems by providing notifications of inventory inconsistencies, certification expirations and more. Traceability for cannabis must be able to handle the complexities of procedures like terpene extraction and injection. With the rapid growth of the industry, it must be able to set targets and track actuals. It should track, not just cannabis plants and related derivatives, but also every other ingredient, material and packaging material used during production. There must be monitoring at each stage of production and a system in place to ensure all employee training is up to date. Preventative maintenance must be scheduled and tracked and hazards must be identified and controlled. In the event of an audit or recall, precise mass-balance calculations must be available to account for every gram of product, including non-cannabis ingredients like coconut oil and packaging materials like pouches and labels.
Detailed traceability can make the difference between a cannabis business keeping their license or being shut down. “You have to make a diligent effort to stay compliant 365 days out of the year, because you never know when a regulatory agency is going to come knocking on your door,” says Sigman. Knowing exactly what went wrong when and where allows a company to make changes so failures don’t happen again.
Higher Standards Will Be Demanded
The standard sought by most in the cannabis industry is only GMP (Good Manufacturing Practice) certification, which is actually the lowest level of certification possible in food production. With the public demand for edibles and concentrates on the rise and major retailers scrambling for seats at the table, the demand for transparency from growers and manufacturers will increase. Cannabis companies will soon find that GMP compliance simply won’t be enough to earn trust and expand their market share, especially when it comes to edibles and concentrates.
“Every day, patients express interest and assurance of wanting to know that the foods and medicines they consume are safe and of the best quality available,” says Lindsay Jones, president of Curaleaf Florida, the first medical cannabis company in Florida to achieve SQF Certification. Safe Quality Food (SQF) certification ensures a company meets the highest levels of safety and quality on a reliable basis. Curaleaf has set a new bar in the industry that others will be compelled to follow and they should be congratulated for their proactive vision.
Adopting safety and traceability concepts that the food industry developed over many decades can yield huge benefits for cannabis businesses, but it will be interesting to watch the technology evolve to accommodate the specific needs of retailers and consumers. Imagine a traceability system that ensures safety and quality while also tracking consistency and potency.
The Future of Cannabis Is Bright
The emerging cannabis industry is facing challenging hurdles on its path to widespread legalization and acceptance but the forecast is sunny – for companies who are prepared.
We’ve covered the CannaGrow Expo previously, but this time around we catch up with Joseph De Palma, founder of CannaGrow, to talk about the genesis of his conference and what makes the event so special. This year’s CannaGrow Expo heads to Palm Springs, California, a new location for the event, on May 19thand 20th.
We’ve watched De Palma’s conference grow over the years, moving around the country and becoming the tight-knit community we know it as today. The meat and potatoes of the show are definitely the educational sessions, panel discussions, roundtables and the expo hall. But covering it year after year we’ve noticed a real sense of community develop, one where genuine idea sharing, collaboration and inclusivity are preached. There are no dumb questions at the CannaGrow Expo.
Tom Lauerman speaks to a room full of attendees at CannaGrow San Diego
According to Joseph De Palma, CannaGrow started in 2014, when the original event was held in Denver. “From the beginning, we wanted to create an event specifically for growers, where the focus was always on education and ‘becoming a better grower’,” says De Palma. “We had experienced the existing events in the marketplace, and almost all fit into two categories at the time, festival, or generic tradeshow. Those were fine for their purpose, but they didn’t foster an environment of education, and that’s what we believed was most important to the emerging cannabis industry.” Back in 2014, their show only had 10 sessions and 30 exhibitors. “Passionate growers from around the country had 2 days of grow-focused sharing and learning, and you could see the energy and excitement,” De Palma says. “Discussions would dive deep, people made new friends, and it really elevated the conversation around cultivation.”
Attendees gather at a lighting exhibit at CannaGrow San Diego
Since the show’s debut, it’s grown substantially. The 7th CannaGrow Expo is fast approaching, and this upcoming conference has four separate tracks and roughly 100 exhibitors. But it still keeps its sense of community, one where you don’t feel crowded, where everyone has time to chat and network, without the overwhelming feeling that can come with larger trade shows. “That inclusivity and open dialog is built in,” says De Palma. “If you go to an event that’s tradeshow dominant, most people are there to walk, shop, and leave. At CannaGrow, growers and extractors come together with a plan for the weekend, remaining in a constant state of engagement with others at the show.”
This year’s show has some exciting additions to look out for. The agenda covers a wide range of topics, including everything from an introduction to growing with living soil to a discussion of cyber security. The Extraction Summit, new to this year’s event and held on Day 2, is their response to the massive rise in popularity and demand of extracts.
Eric Schlissel, president and chief executive officer of GeekTek
Eric Schlissel, cybersecurity specialist, president and chief executive officer of GeekTek, is giving a talk focused on IT infrastructure. “My presentation will center around the actions cannabis businesses need to take right now to repel cybercrime and potential federal seizure,” says Schlissel. “As cannabis operators build their businesses and develop their security strategies, they often focus exclusively on the physical portion of their business – the merchandise and the cash in particular – and overlook the importance of designing and fortifying a secure IT infrastructure. I will discuss the importance of a holistic security strategy that embraces both and how you can both create one and prepare it for expansion into other states or even globally from the very start.” Schlissel’s discussion is one example of just how all-encompassing CannaGrow intends to be.
De Palma and his team leave few stones unturned as the show truly delivers vital information for cannabis cultivators in every area. Some things we are looking forward to? Seeing old friends and learning everything under the sun about cannabis science, growing and extraction. “People get to know each other, and with everyone sharing a core passion for cultivation and extraction, lifelong friendships are made,” says De Palma.
According to a press release, the Steep Hill team announced they are expanding internationally in a big way on Monday. Steep Hill, a well-known cannabis lab-testing and research company with roots in California, announced plans for licensing agreements in Mexico, Germany, Spain, France, Italy, Switzerland and the United Kingdom.
Photo credit: Steep Hill- a petri dish of mold growth from tested cannabis
The Canadian branch of the company, Steep Hill Canada, will lead the expansion efforts into Mexico and the six European Union countries. According to Martin Shefsky, chief executive officer of Steep Hill Worldwide, they are actively looking for other operating partners in new areas as well. “I’m extremely pleased at the opportunity to partner with Steep Hill to bring safe cannabis and scientific integrity to emerging international markets,” says Shefsky. “I anticipate that before long, full legalization will be implemented throughout the European Union and our presence will enable growers, producers, processors, and retailers – to offer standardized tested cannabis for patients and consumers across the European Union, while also enabling us to create a platform to share scientific and technology developments throughout the global cannabis market.”
In 2016, Steep Hill announced new licensing agreements to expand into Washington D.C. and Pennsylvania. In August of 2017, they expanded to Hawaii and several months later announced their expansion into Oregon. “It is an exciting time for us and our investors, as we pursue this first-mover advantage in anticipation of new global cannabis import-export markets,” says Jmîchaeĺe Keller, chief executive officer and chairman of the board of Steep Hill, Inc.
“In unregulated markets, we want to be on the ground supporting the legalization and regulatory process, helping regulators avoid making the mistakes that other jurisdictions have made in the past,” Keller says. “We believe that our role as the industry standard, allows us to leverage our world-class scientific knowledge and state of the art technology to help regulators provide confidence in the marketplace that the cannabis patients consume, is both safe and effective. We look forward to collaborating closely with Martin and his group to strive for this gold standard, across all international borders.”
California’s regulated adult use cannabis market has been up and running for around four months now and rumors of a potential supply bottleneck on the horizon are beginning to circulate. There are a number of factors that could have an impact on the cannabis supply in the market, most of which stem from changes in the distribution channels now that the state is implementing new regulations.
Those include a slow rollout in licensing cannabis businesses, new testing requirements, the supply carryover period prior to January 1stas well as new labeling and packaging regulations. In this piece, we are going to examine some of those rumors, see if there might be some truth to them and provide some guidance for what businesses can do to prepare for this.
A Slow Start to Licensing
This one is perhaps the most obvious factor to impact the supply chain in California. Much of the delays in licensing cannabis businesses came from the issue of local control, where businesses needed to get approval from their municipality before getting a state license. In the first month of the new market, it took Los Angeles weeks longer than other counties to begin licensing dispensaries. Whereas San Diego retailers saw a massive influx of customers right away, forcing them to buy up product to meet the high demand. Smaller producers also had trouble getting licenses as quickly as some of the larger ones.
Basically it all boils down to a slow start for the new market, according to Diane Czarkowski, co-founder of Canna Advisors. “The state is requiring businesses to get their local licenses before they can get their state license and that will create a delay in operators being able to bring products to market,” says Czarkowski. She says this is pretty typical of new markets, or when a market experiences dramatic changes quickly. “It could be a brand-new market, like in Hawaii, where the operators were ready with product, but there were no labs to test the products, which caused delays.” In addition to the licensing roll out being slow to start, the temporary licenses initially awarded to businesses are set to expire soon, by the end of April.
Stricter Rules to Come
The same logic goes for the testing regulations. New testing and labeling requirements, according to the Bureau of Cannabis Control regulating the market, will be phased in throughout 2018.
California’s plan for phasing in testing requirements.
The state has already phased in cannabinoids, moisture content, residual solvent, pesticide, microbial impurities and homogeneity testing to some extent. On July 1st, the state will add additional residual solvent and pesticide testing as well as foreign material testing. At the end of 2018, they plan on requiring terpenoids, mycotoxins, heavy metals and water activity testing. All of those tests cost money and all of those tests could impact suppliers’ ability to bring product to market. “Oftentimes regulations require different types of testing to be done to products without recognizing that adequately completing those tests requires different methods, equipment, and standards,” says Czarkowski. “Most labs do not have all of the necessary components, and they are very costly. Producers could wait weeks to get test results back before they know if they can sell their products.”
Back when we spoke with Josh Drayton, deputy director of the California Cannabis Industry Association, about the upcoming changes to the California market, he voiced his concerns with the coming testing rules. “A lot of testing labs are concerned they are unable to test at the state’s threshold for some of these contaminants and pesticides; the detection limits seem very low,” says Drayton. “The testing portion will take years to work out, I am sure we will remove and add different pesticides and contaminants to the list.” California’s testing industry is, however, capable of adapting to changing rules, as they’ve done in the past on more than one occasion. It should be noted that many labs in the state are on the cutting edge of testing cannabis, working with The Bureau to implement the new rules.
Roy Bingham, CEO of BDS Analytics
Cannabis products made prior to December 31st, 2017, did not need to comply with the stricter testing rules that are coming in the next few months. This carryover period allowed dispensaries to have products on the shelves when the new market launched in the beginning of 2018. Retailers knew this rule meant they needed to stockpile product in the event of a supply bottleneck, and it appears much of that product is now sold and running out, according to Roy Bingham, founder and chief executive officer of BDS Analytics. “The true impact of licenses is starting to be felt since the carryover from December buying prior to the licensed market has been sold,” says Bingham. “Some of the major brands have consciously not applied for licenses. Some of that has to do with the flexibility the government has given them to wait.”
A fourth reason for a potential bottleneck could also come from packaging and labeling rules. “There will have to be many modifications to products to ensure they follow the new potency regulations, and many formulations will have to be modified in order to meet new regulations,” says Czarkowski. Distributor licenses, according to The Bureau, have a number of compliance documentation requirements, such as arranging for all product testing, quality assurance and packaging and label accuracy. Everything has to be packaged before it gets to a dispensary, which is a new rule California businesses need to comply with.
Pricing is the Indicator
There are a handful of reasons why prices could increase; some of them are more defined than others, the biggest factor being the tax burden passed on to consumers, where reports showed up to a 40% increase from last year. A price increase in the future could also come from The Bureau implementing testing regulations throughout 2018, as mentioned previously.
If prices were to surge enormously and very quickly, that might be an indicator that a shortage is fast approaching. A dramatic increase in price over this year could squeeze margins for smaller producers, forcing retailers to pass that burden on to consumers as well.“So yes, the rumors are true.”
According to Roy Bingham, there has been a significant increase in pricing in all categories at the retail level. “In January and February, we are seeing about 10% increases per month in average retail prices,” says Bingham. “If we look at concentrates in California during 2017, they averaged about $34 by the end of the year, whereas it was about $31 at the start of 2017. So in January, prices have increased up to $38, which is a bit above trend, but in fact we were seeing a trend upwards before January 1st as well.” Comparing that with edibles pricing, Bingham says we see a clear jump at the start of 2018. “It was basically flat in 2017, averaging $14 roughly almost straight-line across, dipped in December, then in January it jumped to $17 and then to $18 in February, a big increase and significantly more than concentrates,” says Bingham. He also says flower was hovering around $9 per gram in December 2017, but surged above $10 in February 2018.
According to Cannabis Benchmarks, the California wholesale averages surged in the summer of 2017 up to $1,631 by September, then reached their lowest point in December, with their spot index at $1,368. The Cannabis Benchmarks report underlines some important reasons for the changes in pricing, but they also attribute it to the new licensing system.
“Increasing operating expenses for businesses preparing to enter California’s licensed system in 2018 were key to propping up supply side rates in the first six months of 2017. New compliance requirements were being instituted to varying degrees by local governments, while market participants warily eyed draft regulations from state officials for guidance as to how to prepare their sites and facilities to meet under-construction regulatory mandates.”
Their report highlights some very important aspects of the supply chain. “Again, it is likely that the increased costs faced by operators up and down the supply chain exert some upward pressure on wholesale rates, preventing them from steep year-over-year declines that were observed in some of the other major Western markets,” reads the Cannabis Benchmarks report.
So How Can Businesses Prepare?
Well to start, producers should make sure their operations and product are clean and safe. Making sure your product will pass a pesticide test should be top of mind. Dispensaries should also be wise in selecting their suppliers, performing supplier quality audits or some form of verification that they meet your standards is key in a consistent supply chain.
Dr. Jon Vaught, chief executive officer of Front Range Biosciences, believes tissue culture could be a viable solution for some California producers. Using tissue culture, as a form of propagation instead of mothers and clones can be cleaner, cheaper and more efficient, thus allowing growers to keep up with demand and prevent a shortage.
Dr. Jon Vaught, CEO of Front Range Biosciences
Dr. Vaught says growers could look to tissue culture as a means to “mitigate risk to their supply chain and mitigate the risk of potential loss and improve their ability to efficiently grow their plant.” Maintaining a disease-free, sterile environment is a huge advantage in the cannabis market. “The real use of tissue culture is to provide disease free, clean, certified material, that has gone through a QA program,” says Dr. Vaught. “In greenhouses, the ability to control your environment is also critical because your margin of error is high. Variations in sunlight, weather, humidity all of these things have an impact in your plants. Technology can help monitor this.”
We’ve covered the basics of tissue culture previously on CIJ, with Dr. Hope Jones chief science officer of C4 Laboratories. She echoes many of Dr. Vaught’s points, firmly believing that, having existed for decades, tissue culture is an effective propagation tool for advanced breeders or growers looking to scale up.It is a complex supply chain that requires systems thinking.
It is important to note they don’t think growers should try this at home. Work with professionals, get the necessary funding, the training and facilities required if this is a project that interest you. “There’s a pretty big barrier to entry there,” Dr. Vaught urges. “The ability to manage thousands or millions of plants in a greenhouse increases risk, whereas in the lab, you’ve got a safe, secure, sterile environment, reducing risk of disease, making things easier to manage. The producers most successful at large scale are controlling those variables to the T.”
Ultimately, one segment of the market can’t prevent a bottleneck. It is a complex supply chain that requires systems thinking. Regulators need to work with producers, manufacturers, retailers, distributors, patients, consumers and laboratories to keep an eye on the overall supply chain flow.
Diane Czarkowski says the California market should prepare for this now if they haven’t already. “We have seen supply issues in every market going through a change. Other potential bottlenecks will occur because former distribution channels will be required to change,” says Czarkowski. “So yes, the rumors are true.”
Cannabis pricing, globally, is a topic that is going to remain heated if not highly fluid for some time to come. Why? Government regulation (or lack thereof), compliance and even transport along with different models for commerce and consumption are creating an odd and absolutely uneven map of commodity pricing. We live in a world where accurate information is hard to come by. Even from ostensibly “official” sources that track operational markets. Black or legit.
It may sound complex today but it used to be a lot harder. As of just 2014, the UN’s Office of Drug Control listed the price of a gram of (black market) cannabis in Lichtenstein at $1,020 (as reported by a bemused Business Insider). While this could have been a simple matter of misunderstanding that Europeans frequently use commas rather than periods as decimal points in numbers, the fact that this was later corrected to $10.13 suggests human error in transcription rather than reporting. And the world has certainly changed since then.
Yet with no international legal marketplace or even platform yet in existence to track the global price of legal cannabis in different jurisdictions, this is the kind of issue that faces not only those in the industry but those trying to analyze it.
That said, there are beginning to be data points for those who are interested and those who must have this information for professional reasons. Here is a break-down of regional (legal) prices, per gram from a selection of sources generally considered fairly accurate. This is also made a bit more difficult by the difference in measurement systems and currency fluctuations. For ease of reference, these figures are in grams and U.S. dollars. An ounce is about 28 grams.
Medical grade cannabis also means different things in different markets. Outside the U.S., in Canada and the EU in particular, medical grade cannabis must meet a certification process that adds to the cost of production considerably. Certainly in comparison with outdoor grows. It is still, for the most part, imported, from either Canada or Holland, although look for that to start changing this year as domestic cultivation in multiple countries finally gets seriously underway.
The U.S.
Pricing really depends on where you are. It is also dropping fairly dramatically in established markets. The most recent example of this is Oregon – which has seen its higher-than-normal state retail market begin to normalize with California, Washington and Colorado. This is the price of establishing regulatory schemes on a non-federal level. That said, the competition is so extreme at the moment that Oregon, in particular, is a buyer’s market, with recently reported prices as low as $1 and change for a gram.
Retail pricing, in particular, will remain all over the place on a national level, especially given the amount of local competition between dispensaries underway. On average, however, medical grade-ish cannabis runs between $6-30 a gram, retail.
According to the website Cannabis Benchmarks, which tracks U.S. wholesale prices, the domestic spot index of wholesale cannabis was at $1,292 per pound at the end of January. Or about $5 per gram.The theory that the legit market has to price the black market out of existence is unpopular with those who want to collect more taxes from rec sales.
Nationally, at the moment, uncertainty over how the new post-Cole Memo world will play out, plus oversupply in certain markets, is creating strange pricing. Note to consumers, particularly in recreational markets: There are deals to be had.
Canada
This market is interesting for several reasons. The first is that several of the regional governments are considering establishing a Canadian $10 per gram price for the recreational market. Medical grade runs about $8 at the moment in local currency. That means, with a 20% differential in current f/x rates, a recreational gram will be set at USD $8 and a medical gram at about $6. That said, the theory that the legit market has to price the black market out of existence is unpopular with those who want to collect more taxes from rec sales.
Theories abound about the future of recreational pricing, but for the moment, a great deal of supply and new producers will keep prices low at least through 2019. After that? It is impossible to even guess. At that point, Canadian producers will still be supplying at least German medical patients with some of their imported bud. Regardless, the country will continue to play an important role in global pricing – even if it is to set a recreational and medical standard that plays out in markets already from the EU to Australia.
Israel
Like Canada’s market, although for different reasons, the Israeli official price on legal cannabis is absolutely constant. It is set by government policy. Those who have the drug legally, in other words with a doctor’s prescription, pay about $100 for a month’s supply. That amount on average is about 28 grams. That means that a medical gram in Israel will set you back about $3.50 per. U.S. not Canadian.
Europe
Price deltas here are the most impacted by changing national laws, standards and medical legalization. There are only two semi-legitimate recreational markets at the moment that include THC. Those are Holland and Spain. In Holland, via the coffee shops, the low-end of passable bud starts at between $12-15 per gram and goes up to about $30 for the really exotic breeds. This being Holland, they exist and are obtainable. In Spain, add the cost of joining a social club (about $50), but in general, the cost of a gram is about $10.Price deltas here are the most impacted by changing national laws, standards and medical legalization.
Medical markets in places like Germany are still skewed by integration of the drug into the country’s healthcare system and the fact that it is still all imported. The horror stories are real here. Patients must pay out-of-pocket right now for cannabis flower that is also being pre-ground by local apothekes for an additional price per gram that is eye-wincingly high. However, once the price and supply normalize, look for a medical standard here of about $10 for a month’s supply. That will be about 28 grams too.
Germany, in other words, will eventually be one of the cheapest markets for patients after reimbursement by insurance. That shapes up to be about $0.50 per gram at point of sale. It could be far less for those who are able to obtain authorization for higher amounts up to five ounces per month. The flat fee stays the same. Do the math. That works out to some pretty cheap (high grade) medical relief.
Black market cannabis and hash, which is also far more common in Europe than the U.S. at least, is fairly widely available for between $12 and $20 a gram.
The rise of cannabis production in Eastern Europe and the Baltics (which is also still largely pending and based on ongoing government talks and emerging distribution and cultivation agreements) will also dramatically drive down the cost of legal cannabis in the EU within the next several years. Production in this part of the world, along with Greece, may well also source rec markets all over the continent once that happens.
Africa & Central and South America
While the African cannabis trade has yet to break out – even in the media much of yet, there is definitely something green growing in several African countries including South Africa and Ethiopia. That trade unlike most of what is going on in South America with the possible exception of Uruguay is already looking for export opportunities globally. With African cannabis going for less than a buck a gram in most places (as in about a fifth of even that), look for certified African medical cannabis in select Western markets where price is going to be a major issue. Think medical standards. On the South American front, prices are equally low. However, remember that these are not regulated markets yet. And domestic government standards, starting with GMP and both indoor and outdoor grow requirements are basically non-existent. Growers who want to export to higher regulated markets are planning accordingly.
Assorted Outliers
It goes without saying that in places where cannabis is both illegal and carries the death penalty or other harsh penal retaliation, that the price is not only much higher, but the source is black market. In the UAE for example, a gram will set you back well over $100.
Disclaimer: Marguerite Arnold has just raised the first funds for her blockchain-based company, MedPayRx in Germany (and via traditional investment funding, not an ICO). She will also be speaking about the impact of blockchain on the cannabis industry in Berlin in April at the International Cannabis Business Conference.
You have probably heard of cryptocurrencies, tokens and smart contracts. You might have also heard, even if you did not understand the significance, that IBM recently suggested that the Canadian government use their form of blockchain, called Hyperledger, to track the recreational cannabusiness. Or that a large LP called Aurora is also looking at this space (as are other licensed producers large and small). Or maybe you have seen an item in the mainstream news about an ICO for a cannabis company that is now also going terribly wrong.
What on earth is going on?
These are all related issues, even if highly confusing and disjointed. Blockchain technology and cryptocurrency are hot right now and getting hotter – both in the mainstream world and in the cannabis industry globally. But for all its fans, the drumbeat for caution is also growing louder the more mainstream this technology (and the legitimate cannabis industry) becomes.
The many problems the entire cannabis vertical has with banking has make this current development almost inevitableOn the technology and finance side, that is why so many big names right now are urging caution. Nouriel Roubini, professor at NYU’s Stern School of Business, is just the latest to do so – and for reasons that everything to do with history. Including recent history ten years ago, when the world stood on the brink of a financial disaster thanks to unchained derivatives. The biggest worry in fact, right now, is about the financial implications of widespread adoption of the technology, beyond the tech itself and how it may (and may not) be legitimately used. Which itself is a huge question.
So why all the fuss?
This is revolutionary technology which is also being introduced into the market at a time when decentralized processing for automation is on the horizon. But also because blockchain can be used to create tokens or digital coins that act like financial instruments. And once created, such tokens can be issued much like money or even stock, to raise additional funds – for both start-ups and ongoing enterprises. The best thing though? This technology was invented to create a decentralized form of value exchange and trust-less, anonymized auditing and verification. No traditional financial institutions or even governments needed, wanted or should apply (at least in theory).
The many problems the entire cannabis vertical has with banking has make this current development almost inevitable. Not to mention accessing investment cash (although this is certainly changing outside the United States). Compliance issues in every direction are another wrinkle this tech will help solve. Starting with tracking product but also rapidly expanding to uses including protecting users’ privacy and facilitating access to high-quality, inspected product for qualified users and buyers. Not to mention other areas that are literally space-age but coming fast. Look for cool stuff coming soon involving both AI (artificial intelligence) and IoT (internet of things).
It is a fascinating, complex space. However, one aspect of this world, in particular, Initial Coin Offerings – or ICOs are getting attention right now. Why? They can be an incredibly efficient way to raise money for companies – both ones currently in business and start-ups with little more than a whitepaper or business plan and perhaps a working prototype. More and more of the successful ICOs are, however, for an existing company or are even attached to an asset, including a license, a prototype or a fund of money (or other combinations). They also rely on blockchain and alternative currency or tokens (sometimes also referred to as smart contracts) to work.
From a technology perspective, you can “mint” new coins relatively easily these days, sourced from a variety of different kinds of blockchain. Or even combinations thereof. You also can issue tokens or altcoins without an ICO.
In a world where there is vastly expanding cannabis opportunity, and many of these hopeful entrepreneurs are both digitally astute but without access to traditional capital, what could be better?
Bitcoin quickly became one of the more popular cryptocurrencies
From a financial and investor perspective, ICOs are a hybrid form of an IPO meets social media. “Coins,” “tokens” and “smart contracts” –or cyber currency collectively– are digital forms of cash, contracts, membership cards, discounts or even authorizations for identity. There are many ways tokens can be used, in other words. This by way of saying there are also important differences too. Not all tokens are the same. Not all are used as “money.” Some are but have assets assigned to them (like real estate). Others, particularly smart contract tokens, are strictly functional (pay funds when product is delivered and verified). The one caveat here is that the exchange of any token or altcoin will also cost money. Why? It is the electricity cost of computer processing the request for transfer. Plus access and service fees. There is no such thing as a “free” token. How tokens are priced, sold, bought, maintain value and for what purposes, is a debate if not process function that will not be solved anytime soon. Starting with the fact that some blockchains are more energy efficient (and sourced from green energy) than others.
To add to all of this confusion, not all ICOs function the same way. Some do give investors ownership in the company or specific portfolios that even include real-world assets. Others offer to use pooled funds to buy assets (like real estate or an expensive license). Many rely on the “coin” issued as a kind of discount scheme, reward mechanism and in many cases, direct discounted payment for future goods and services, of both the digital and real world kind. Many offer banking services directly, including in the very near future, the ability to exchange cyber cash for the fiat variety at even remote ATMs. Sound futuristic? It is coming and soon.
Most ICOs in the market now, however, rely on the following supposition: Issue a token with a unique name. Put up an ICO website. Encourage investors from anyplace on the planet with an internet connection, to use either crypto or fiat currency to buy tokens in the issuing startup as an investment that will give the new company funds to operate and build out services or the application (whatever that is). Also, plan to use the tokens for an exchange of some kind in the future (either for other coins or a good or service). Watch the value of the coin increase (for whatever reason) while informing investors (or contributors) that this is not really a security but a “utility” token that is expected but not guaranteed to become more valuable. Retire early with the prospect of having brokers of expensive real estate in places like London and Dubai come calling.The public tide of opinion, even if regulations are slow to move, is on the side of reform if not outright advocacy.
That will not be the case for the vast majority of ICOs, however, no matter what returns, goods or services they offer. Even if they also have vibrant communities already using their services (whatever those are). It will not be the case for most of the cryptocurrencies upon which such ICOs are based (most at the moment are based on Ethereum, NEO, Hyperledger or combinations of the three). There will be more of those too. And not every blockchain will make it (cryptocurrencies and tokens are based on an origin protocol or blockchain much like computer operating systems are either PC or Mac or mobile phones are Android or Apple). Some speak to one another well. Most do not “exchange” easily – even between themselves – let alone back into good old cash. And while nobody wants to be the Betamax of blockchain, there will, inevitably, be quite a few of them. When that happens, any economic value of the coins and even contractual relationships created with them disappear as well. Add in extreme price volatility in the current market pricing of these tokens, and you begin to get a sense of the risk profile involved in all of this.
The real hurdle, not to mention expense, comes when transferring back from the world of crypto to the one of fiat (regular money). Being a Bitcoin billionaire (there are about 1,000 individuals who own about 40% of the entire global Bitcoin issuance) is no fun if you have no place to spend it.
A Rapidly Changing Marketplace
In the past 18 months, cryptocurrency and ICOs have gotten increasing attention because of the increasing value of all kinds of cyber currency (far beyond Bitcoin). The total market cap for all forms of cryptocurrency itself zoomed past $700 billion at the turn of the year. That is impossible to ignore. You might have heard of some of these currencies too. There is ETH, Litecoin, Bitcoin Cash, Dash, even Dogecoin (created originally as a joke on an internet dog meme). Right now, in fact, at some of the most expansive exchanges, there are literally hundreds of these coins which are constantly bought and sold if not exchanged and used.
This has red flags written all over it.
And then there are the sums ICOs are bringing in some cases, flagrantly flaunting regulatory agencies and doing end runs on the global banking system that cannot keep up with them. The top ICO of 2017, a company called Block.one and registered in the Cayman Islands, so far holds the record at $700 million and counting. Filecoin, the second largest ICO last year, raised $262 million in one month from August to September. And then, of course, there is the cannabis industry-specific case of Paragon – now headed for class-action lawsuit litigation over their $70 million pre-and ICO sale intentions.
It would be logical to assume, given the eye-watering sums potentially involved not to mention the large role a smart digital media footprint has to do with an ICO’s success, beyond its service or technology offerings, that this would be a perfect place for cannapreneurs to turn for funding. The global market is opening for cannabis reform at the same time the crypto craze meets Fintech Upheaval is occurring – in fact, these two things are happening almost simultaneously.
Thanks to regulatory realities and an ongoing stigma, there is still no institutional investment in the industry in the United States (that is rapidly changing other places). These are two new industries and dreams are large.
In the legit cannabis space, so are the expenses.
The price of opening a dispensary in most U.S. states tops a million dollars right now. In Europe, the price of entry is even more expensive. A GMP compliant grow facility in Western Europe, plus the money for lawyer’s fees and negotiations for the license itself will set you back anywhere from $20 million and up, depending on the location. Even staying afloat in the industry once the doors are opened is a challenge. And loans, even for outstanding invoices, are still tough to come by in an industry where banking services of the simple business account kind are a challenge. Particularly in the United States.
The public tide of opinion, even if regulations are slow to move, is on the side of reform if not outright advocacy. Why shouldn’t a reform-group-rooted ICO aspire to own or provide ongoing business financing to a community-minded canna farm in California, Canada, Germany, Israel or Australia? Or even Greece?
However, right now, with some noted exceptions, the cannabis business remains at minimum, a dangerous place to consider issuing altcoins that act like financial instruments or raise money with them. Why and how?
Across the country, there is a patchwork of regulatory requirements that vary from state to state. Regulations focus on limiting microbial impurities (such as mold) present in cannabis in order for consumers to receive a safe product. When cultivators in Colorado and Nevada submit their cannabis product to laboratories for testing, they are striving to meet total yeast and mold count (TYMC) requirements.In a nascent industry, it is prudent for state regulators to reference specific testing methodologies so that an industry standard can be established.
TYMC refers to the number of colony forming units present per gram (CFU/g) of cannabis material tested. CFU is a method of quantifying and reporting the amount of live yeast or mold present in the cannabis material being tested. This number is determined by plating the sample, which involves spreading the sample evenly in a container like a petri dish, followed by an incubation period, which provides the ideal conditions for yeast and mold to grow and multiply. If the yeast and mold cells are efficiently distributed on a plate, it is assumed that each live cell will give rise to a single colony. Each colony produces a visible spot on the plate and this represents a single CFU. Counting the numbers of CFU gives an accurate estimate on the number of viable cells in the sample.
The plate count methodology for TYMC is standardized and widely accepted in a variety of industries including the food, cosmetic and pharmaceutical industries. The FDA has published guidelines that specify limits on total yeast and mold counts ranging from 10 to 100,000 CFU/g. In cannabis testing, a TYMC count of 10,000 is commonly used. TYMC is also approved by the AOAC for testing a variety of products, such as food and cosmetics, for yeast and mold. It is a fairly easy technique to perform requiring minimal training, and the overall cost tends to be relatively low. It can be utilized to differentiate between dead and live cells, since only viable living cells produce colonies.
Petri dish containing the fungus Aspergillus flavus. Photo courtesy of USDA ARS & Peggy Greb.
There is a 24 to 48-hour incubation period associated with TYMC and this impedes speed of testing. Depending on the microbial levels in a sample, additional dilution of a cannabis sample being tested may be required in order to count the cells accurately. TYMC is not species-specific, allowing this method to cover a broad range of yeast and molds, including those that are not considered harmful. Studies conducted on cannabis products have identified several harmful species of yeast and mold, including Cryptococcus, Mucor, Aspergillus, Penicillium and Botrytis Cinerea. Non-pathogenic molds have also been shown to be a source of allergic hypersensitivity reactions.The ability of TYMC to detect only viable living cells from such a broad range of yeast and mold species may be considered an advantage in the newly emerging cannabis industry.
After California voted to legalize recreational marijuana, state regulatory agencies began exploring different cannabis testing methods to implement in order to ensure clean cannabis for the large influx of consumers.
Unlike Colorado, California is considering a different route and the recently released emergency regulations require testing for specific species of Aspergillus mold (A. fumigatus, A. flavus, A. niger and A. terreus). While Aspergillus can also be cultured and plated, it is difficult to differentiate morphological characteristics of each species on a plate and the risk of misidentification is high. Therefore, positive identification would require the use of DNA-based methods such as polymerase chain reaction testing, also known as PCR. PCR is a molecular biology technique that can detect species-specific strains of mold that are considered harmful through the amplification and analysis of DNA sequences present in cannabis. The standard PCR testing method can be divided into four steps:
The double stranded DNA in the cannabis sample is denatured by heat. This refers to splitting the double strand into single strands.
Primers, which are short single-stranded DNA sequences, are added to align with the corresponding section of the DNA. These primers can be directly or indirectly labeled with fluorescence.
DNA polymerase is introduced to extend the sequence, which results in two copies of the original double stranded DNA. DNA polymerases are enzymes that create DNA molecules by assembling nucleotides, the building blocks of DNA.
Once the double stranded DNA is created, the intensity of the resulting fluorescence signal can uncover the presence of specific species of harmful Aspergillus mold, such as fumigatus.
These steps can be repeated several times to amplify a very small amount of DNA in a sample. The primers will only bind to the corresponding sequence of DNA that matches that primer and this allows PCR to be very specific.
PCR testing is used in a wide variety of applications Photo courtesy of USDA ARS & Peggy Greb.
PCR is a very sensitive and selective method with many applications. However, the instrumentation utilized can be very expensive, which would increase the overall cost of a compliance test. The high sensitivity of the method for the target DNA means that there are possibilities for a false positive. This has implications in the cannabis industry where samples that test positive for yeast and mold may need to go through a remediation process to kill the microbial impurities. These remediated samples may still fail a PCR-based microbial test due to the presence of the DNA. Another issue with the high selectivity of this method is that other species of potentially harmful yeast and mold would not even be detected. PCR is a technique that requires skill and training to perform and this, in turn, adds to the high overall cost of the test.
Both TYMC and PCR have associated advantages and disadvantages and it is important to take into account the cost, speed, selectivity, and sensitivity of each method. The differences between the two methodologies would lead to a large disparity in testing standards amongst labs in different states. In a nascent industry, it is prudent for state regulators to reference specific testing methodologies so that an industry standard can be established.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
