Tag Archives: compliance

July 31, 2019

Keeping Your Environment Clean: Preventative Measures Against Contamination

By Jeff Scheir

For years we have heard about and sometimes experienced, white powdery mildew when growing cannabis. It is a problem we can see, and we have numerous ways to combat it. But now more and more states are introducing regulatory testing on our harvests and they are looking for harmful substances like Escherichia coli., Aspergillis Fumigatus, Aspergillis terreus, … just to name a few. Mycotoxins, mold and bacteria can render a harvest unusable and even unsellable- and you can’t see these problems with the naked eye. How much would it cost you to have to throw away an entire crop?

You bring in equipment to control the humidity. You treat the soil and create just the right amount of light to grow a superior product. You secure and protect the growing, harvesting, drying and production areas of your facility. You do everything you can to secure a superior yield… but do you?

Many of the organisms that can hurt our harvest are being multiplied, concentrated and introduced to the plants by the very equipment we use to control the growing environment. This happens inherently in HVAC equipment.

Your air conditioning equipment cools the air circulating around your harvest in a process that pulls moisture from the air and creates a perfect breeding ground in the wet cooling coil for growth of many of the organisms that can destroy your yield. As these organisms multiply and concentrate in the HVAC system, they then spew out into the very environment you are trying to protect at concentrated levels far greater than outside air. In effect, you are inoculating the very plants you need to keep safe from these toxins if you want to sell your product.

The cannabis industry is starting to take a page from the healthcare and food safety industries who have discovered the best way to mitigate these dangers is the installation of a proper UVC solution inside their air conditioning equipment.

Why? How does UVC help? What is UVC?

What is Ultraviolet?

Ultraviolet (UV) light is one form of electromagnetic energy produced naturally by the sun. UV is a spectrum of light just below the visible light and it is split into four distinct spectral areas – Vacuum UV or UVV (100 to 200 nm), UVC (200 to 280 nm), UVB (280 to 315 nm) and UVA (315 to 400 nm). UVA & UVB have been used in the industry to help promote growth of cannabis.

What is UVC (Ultraviolet C)?

The entire UV spectrum can kill or inactivate many microorganism species, preventing them from replicating. UVC energy at 253.7 nanometers provides the most germicidal effect. The application of UVC energy to inactivate microorganisms is also known as Germicidal Irradiation or UVGI.

UVC exposure inactivates microbial organisms such as mold, bacteria and viruses by altering the structure and the molecular bonds of their DNA (deoxyribonucleic acid). DNA is a “blue print” these organisms use to develop, function and reproduce. By destroying the organism’s ability to reproduce, it becomes harmless since it cannot colonize. After UVC exposure, the organism dies off leaving no offspring, and the population of the microorganism diminishes rapidly.

Ultraviolet germicidal lamps provide a much more powerful and concentrated effect of ultraviolet energy than can be found naturally. Germicidal UV provides a highly effective method of destroying microorganisms.

To better understand how Steril-Aire UVC works, it is important to understand the recommended design. Directed at a cooling coil and drain pan, UVC energy destroys surface biofilm, a gluey matrix of microorganisms that grows in the presence of moisture. Biofilm is prevalent in HVAC systems and leads to a host of indoor air quality (IAQ) and HVAC operational problems. UVC also destroys airborne viruses and bacteria that circulate through an HVAC system and feed out onto the crop. HVAC cooling coils are the largest reservoir and amplification device for microorganisms in any facility.

For the most effective microbial control, UV germicidal Emitters are installed on the supply side of the system, downstream from the cooling coil and above the drain pan. This location provides more effective biofilm and microbial control than in-duct UVC installations. By irradiating the contaminants at the source – the cooling coils and drain pans – UVC delivers simultaneous cleaning of surface microorganisms as well as destruction of airborne microorganisms and mycotoxins. Steril-Aire patented this installation configuration in 1998.

The recirculating air in HVAC systems create redundancy in exposing microorganisms and mycotoxins to UVC, ensuring multiple passes so the light energy is effective against large quantities of airborne mycotoxins and cleaning the air your plants live by.

Where are these mycotoxins coming from?

Aspergillus favors environments with ample oxygen and moisture. Most pre-harvest strategies to prevent these mycotoxins involve chemical treatment and are therefore not ideal for the cannabis industry.

Despite the lack of cannabis protocols and guidelines for reducing mycotoxin contamination, there are some basic practices that can be utilized from other agricultural groups that will help avoid the production of aflatoxins and ochratoxins.

When guidelines are applied correctly to the cannabis industry, the threat of aflatoxin and ochratoxin contamination can be significantly reduced. The place to start is a clean air environment.

Design to win

The design of indoor grow rooms for cannabis is critical to the control of airborne fungal spores and although most existing greenhouses allow for the ingress of fungal spores, experience has shown that they can be retrofitted with air filters, fans, and UVC systems to make them relatively free of these spores. Proper designs have shown clearly that:

Prevention via air and surface disinfection using germicidal UVC is much better than chemical spot treatment on the surface of plants
High levels of air changes per hour enhance UVC system performance in reducing airborne spores
Cooling coil inner surfaces are a hidden reservoir of spores, a fertile breeding ground and constitute an ecosystem for a wide variety of molds. Continuous UVC surface decontamination of all coils should be the first system to be installed in greenhouses to reduce mildew outbreaks.

UVC can virtually eliminate airborne contaminants

Steril-Aire was the first and is the market leader in using UVC light to eliminate mold and spores to ensure your product will not be ruined or test positive.

Mold and spores grow in your air handler and are present in air entering your HVAC system.
Steril-Aire UVC system installs quickly and easily in your existing system.
The Steril-Aire UVC system destroys up to 99.999% of mold/spores.
Plants are less likely to be affected by mold…with a low cost and no down time solution.

It’s time to protect your harvest before it gets sick. It’s time to be confident your yield will not test positive for the contaminants that will render it unusable. It’s time to win the testing battle. It’s time for a proper UVC solution to be incorporated throughout your facilities.

July 30, 2019

Sweden Joins Italy In Path To Defining CBD Oil Regulations

By Marguerite Arnold

2 Comments

The highest court in Sweden has weighed in on the novel food, and the darling of the Swiss marketplace, CBD conversation. Further, it has done so in a move that seems predetermined to push the so-far escalating novel food debate EU-wide. Along, of course, with what constitutes “narcotic” cannabis.

Namely, Sweden’s highest court ruled in June that CBD oil with any concentration of THC falls under the narcotic jurisdiction.

Sound confusing? Welcome to the world of every CBD producer and purveyor on the “right” side of the Atlantic.

Beyond The Lingo and Legal Mumbo Jumbo

When one follows the logic, there is one, hidden in the Swedish meatball of careful legal wording. Here is a translation, more or less of what the court intended.

The first is that the Swedes, along with the Italians (and expect this attitude to be reflected all over Europe) accept that cannabidiol when it comes from hemp, if not CBD oil derived from the same, generally, is excluded from the definition of cannabis (as a narcotic). Therefore it is not a narcotic drug.

However, according to the court, the loose definitions of what “CBD oil” is both legally and in the marketplace, no longer applies if the plant has been converted into a preparation containing THC. This is a clear shot across the bow of the “Cannabis Lite” movement that has been so popular across the continent for the last year or so and has absolutely electrified certain regions (see not only Switzerland but the UK and Spain).

This has added to the sky-high evaluations of the cannabis industry (or even the CBD part of it) in certain industry predictions, rosy scenarios and forward-looking statements.

However, in a nod to reality, the court also recognized that there is an exemption for trace amounts of CBD in the current frameworks, although it is indeterminate. In other words, this is a move to force regulators to determine what trace levels of THC are permitted. And further, to force regulation and licencing of the so-far, fairly free-wheeling industry that hoped, much like Holland, to establish itself in the grey spaces between the regulatory schematic of Europe.

Just some of the many CBD products on the market today.

No dice. See Holland of late. But also see Italy, Austria and Germany.

For those who still held out a vague dream of hope that this whole issue was going to go away, or get swept under the carpet of anti-regulatory Brexit mania (in the British case), think again.

In the Swedish situation, much like the Italian CBD caper, the individual at the heart of the court case was a man who escaped a minor drug charge for possession of CBD oil. However, the message is clear: Large scale distribution of CBD oil with “undeterminable” levels of THC (essentially all of it in the market until the rules are set), is courting a criminal drugs charge.

Look for licensing definitions soon.

What Does This Say About The CBD Future In Europe?

Much of this debate is also caught up in larger issues, namely labelling. The British, for example, have just seen recalls at some of the largest supermarkets in the country because of the same. It is a hot topic in several places.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

Europeans, in general, and this includes the British, are generally also horrified at how Americans in particular, consume food and other products exposed to chemicals they know are toxic. However common chlorinated chicken is in the U.S., for example, this is a discussion as toxic to all Europeans, including the British, as well, chemically treated anything.

This is also a reflection of the much “greener” lifestyle Europeans aspire to lead (even with bizarre gross-outs like “fatbergs” in the Victorian recesses of London sewers). Even if they have not managed it yet, here. Climate change denial, especially in mostly air-conditioner free Europe, and especially this summer, is a rare concept indeed.

The novel food issue where it crosses with cannabis, in other words, has just popped up again, in Sweden. And given its proximity to not only recent legal decisions on the same, especially by their neighbors, if not on the calendar, the industry and all those who hope to chart its projections if not successfully surf its market vagaries, need to take note if not adjust accordingly.

July 30, 2019

UK Non-Profit Launches Project TWENTY21 To Register 20K Cannabis Patients

By Marguerite Arnold

15 Comments

In late June, as more than a thousand people descended on the South Bank Center to attend the largest cannabis conference held so far in the UK, another development was taking place away from the headlines.

Drug Science, a non-profit research group founded to reform drug policies based on scientific evidence rather than politics or even economic considerations, launched an ambitious trial project in the UK.

The goal? To get medical cannabis to 20,000 British patients suffering from a range of conditions that the drug is well known to help treat.

Who Is Drug Science?

Founded by Professor David Nutt, the former chief drug advisor to the British government who was fired in 2009 for stating that ecstasy and LSD were less harmful than alcohol, the group itself is clearly not afraid to tackle controversy. The Project TWENTY21 initiative is an ambitious if not desperately needed undertaking.

Targeted patient groups include those suffering from chronic pain, PTSD, MS, Tourette’s and addiction.

Several cannabis companies have already signed up to support the effort which also includes the United Patients Alliance ,and academic researchers.

According to Abby Hughes, Head of Outreach for UPA, “Whilst a change in UK law has given clinicians the green light to prescribe medical cannabis, the majority of patients are denied access, some even being criminalised, whilst corporations are profiting from the same plant.”

Hughes also noted that the goal of the project is to begin to ground patient demand in research and hard data. “We hope that by having a dataset that proves the efficacy of medical cannabis, thousands of patients will be able to access legal, affordable medicine, which may improve their quality of life,” she said.

What Is The Scope of Project TWENTY21?

It is the first-of-its-kind project in the UK where, 9 months after the law changed to allow prescription of cannabinoids as well as the medical importation of the same, there are less than 20 (legal) patients in the country. And all of the successful candidates so far have fought for the right and still do.

While important in its own right, the concept if not forward motion on the same, is also poised to create similar trials all over Europe. This is especially true in countries (like France) where the issue of reform has not moved at all. Or even in Germany (with well over 50,000 patients two and a half years after similar reform was passed by the Bundestag) where problems with access and questions about medical efficacy still frustrate the close to a million Germans who cannot access the drug. Switzerland and Luxembourg may yet prove to be similiarly interesting.

Why Is This Timely?

There has been an increased call for the need for widespread and sustained population trials across Europe as the cannabis industry has really begun to establish itself since mid-2016. This is the only way to help forward medical understanding of cannabinoids at a level that leads to mainstream acceptance. And more importantly, medical and payer mainstream approvals. Until that happens, despite all the press releases, overall sales across the continent remain low.

One of the most important issues beyond this – the extraordinarily high pricing seen in Europe until late last year – has also played a role of course. Payers (see the German “statutory” health insurers) on the front lines of uncertain medical efficacy are still reluctant to pay for a drug, in any form, they do not understand, do not have evidence for, and are still highly suspicious of.

There has been an increased call for the need for widespread and sustained population trials across Europe With cannabis companies agreeing to provide product (in this case potentially from Australia), a research organization with national chops and brave leaders is likely to take the conversation far. And not just in the UK.

While Drug Science is of course not the only British entity planning canna trials and in part supported by the Canadian industry (see The Beckley Foundation for starters), Project 2021 is also certainly likely to be a study with both local as well as regional and global implications.

In Europe, there are other regional trials now in the offing (see Switzerland, Germany and France). Only Germany of course, has a patient population that is starting to be large enough to be effectively studied, and of course, the majority of these patients are still receiving dronabinol.

It is also clearly a steady state march, rather than a discussion that is likely to see significant boosts in patient numbers any time soon. Unless of course, there are other contributing factors.

Regardless, unlike the U.S. and even Canada, the strict medical focus of Europe (including the UK) is finally moving the conversation to the next level. Large, regional and/or national medical trials – and further for conditions the drug is well-known to treat but are so far considered “off-label” for most Europeans will be the watchword here for the next several years.

July 24, 2019

FDA Sends Warning Letters to Curaleaf

By Aaron G. Biros

No Comments

Curaleaf Hemp, a well-known and publicly traded cannabis company, made headlines this week for all the wrong reasons. The US Food & Drug Administration (FDA) sent a warning letter to Curaleaf President Joseph Lusardi for making unsubstantiated health claims and for misbranding their products as drugs.

The health claims in question appear to be removed from their website and social media accounts. In the warning letter, the FDA cites numerous claims made on Curaleaf’s website, Twitter and Facebook accounts. You can check out the health claims they found here, but it’s essentially a list of instances where Curaleaf said their products can be used to treat specific conditions. They claimed their CBD vape pen can be used for chronic pain and said another one of their products is a “[S]oothing tincture for chronic pain.”

For most of the health claims the FDA cited, it appeared they were articles or blog posts on Curaleaf’s website. Take a look at some examples of statements that should not be posted on a CBD products website (taken from the warning letter found here):

“CBD has also been shown to be effective in treating Parkinson’s disease.”
“CBD has been linked to the effective treatment of Alzheimer’s disease . . ..”
“CBD is being adopted more and more as a natural alternative to pharmaceutical-grade treatments for depression and anxiety.”
“CBD can also be used in conjunction with opioid medications, and a number of studies have demonstrated that CBD can in fact reduce the severity of opioid-related withdrawal and lessen the buildup of tolerance.”
“CBD has been demonstrated to have properties that counteract the growth of spread of cancer.”
“CBD was effective in killing human breast cancer cells.”
“Heart disease is one of the leading causes of death in the United States each year, and CBD does a number of things to deter it. The two most important of these are the ability to lower blood pressure, and the ability to promote good cholesterol and lower bad cholesterol.”

While the FDA is expediting their push to roll out hemp and CBD regulations, companies should still be cautious when marketing their products for interstate commerce. Dr. Amy Abernathy, Principal Deputy Commissioner and Acting CIO, said in a series of tweets earlier this month that the FDA is eager to get to work and plans to report on their progress by the end of summer. The public hearing they held back in May helped jumpstart their efforts to begin investigating regulation of the market.

Still, companies need to be careful when marketing CBD products. The FDA has made it abundantly clear in a lot of warning letters that drug claims are not allowed. Here are two articles that give advice on how companies should proceed with marketing and how to go about properly labeling their products.

July 19, 2019

Sustainable Plastic Packaging Options for Your Cannabis Products

By Danielle Antos

7 Comments

A large part of your company’s brand image depends on the packaging that you use for your cannabis product. The product packaging creates a critical first impression in a potential customer’s mind because it is the first thing they see. While the primary function of any cannabis packaging is to contain, protect and identify your products, it is a reflection of your company in the eyes of the consumer.

For all types of businesses across the US, sustainability has become an important component for success. It is increasingly common for companies to include sustainability efforts in their strategic plan. Are you including a sustainability component in your cannabis business’ growth plan? Are your packaging suppliers also taking sustainability seriously? More and more, consumers are eager to purchase cannabis products that are packaged thoughtfully, with the environment in mind. If you are using or thinking about using plastic bottles and closures for your cannabis products, you now have options that are produced from sustainable and/or renewable resources. Incorporating sustainable elements into your cannabis packaging may not only be good for the environment, but it may also be good for your brand.

Consider Alternative Resins

Traditionally, polyethylene produced from fossil fuels (such as oil or natural gas), has been used to manufacture HDPE (high density polyethylene) bottles and closures. However, polyethylene produced from ethanol made from sustainable sources like sugarcane (commonly known as Bioresin) are becoming more common.

Unlike fossil fuel resources which are finite, sustainable resources like sugarcane are renewable – plants can be grown every year. For instance, a benefit of sugarcane is that it captures and fixes carbon dioxide from the atmosphere every growth cycle. As a result, production of ethanol-based polyethylene contributes to the reduction of greenhouse gas emissions when compared to conventional polyethylene made from fossil fuels, while still exhibiting the same chemical and physical properties as conventional polyethylene. Although polyethylene made from sugarcane is not biodegradable, it can be recycled.

Switching to a plastic bottle that is made from ethanol derived from renewable resources is a great way for cannabis companies to take positive climate change action and help reduce their carbon footprint.

For instance, for every one ton of Bioresin used, approximately 3.1 tons of carbon dioxide is captured from the atmosphere on a cradle-to-gate basis. Changing from a petrochemical-derived polyethylene bottle to a bottle using resins made from renewable resources can be as seamless as approving an alternate material – the bottles look the same. Ensure that your plastic bottle manufacturer is using raw materials that pass FDA and ASTM tests. This is one way to help reverse the trend of global warming due to increasing levels of carbon dioxide (CO₂) in our atmosphere.

PET bottles derived from 100% recycled post-consumer material.

Another option is to use bottles manufactured with recycled PET (polyethylene terephthalate). Consisting of resin derived from 100% recycled post-consumer material, it can be used over and over. This is an excellent choice because it helps keep plastic waste to a minimum. Regardless of the resin you select, look for one that is FDA approved for food contact.

Consider Alternative Manufacturing Processes

Flame Treatment Elimination

When talking about plastic bottle manufacturing, an easy solution to saving fossil fuels is eliminating the flame treatment in the manufacturing process. Historically, this process was required to allow some water-based adhesives, inks, and other coatings to bond with HDPE (high density polyethylene) and PP (polypropylene) bottles. Today, pressure-sensitive and shrink labels make this process unnecessary. Opt out and conserve natural gas. For instance, for every 5 million bottles not flamed approximately 3 metric tons of CO₂is eliminated. This is an easy way to reduce the carbon footprint. Ask your cannabis packaging manufacturer if eliminating this process is an option.

Source Reduction (Right-Weighting)

When considering what type and style of bottle you want to use for your cannabis product, keep in mind that the same bottle may be able to be manufactured with less plastic. A bottle with excess plastic may be unnecessary and can result in wasted plastic or added costs. On the other hand, a bottle with too little plastic may be too thin to hold up to filling lines or may deform after product is filled. Why use a bottle that has more plastic than you actually need for your product when a lesser option may be available? This could save you money, avoid problems on your filling lines, and help you save on your bottom line. In addition, this will also help limit the amount of natural resources being used in production.

Convert to Plastic Pallets

If you are purchasing bottles in large quantities and your supplier ships on pallets, consider asking about plastic pallets. Reusable plastic pallets last longer than wood pallets, eliminate pallet moisture and improve safety in handling. They also reduce the use of raw materials in the pallet manufacturing process (natural gas, metal, forests, etc.) aiding in efforts towards Zero Net Deforestation. And, returnable plastic pallets provide savings over the long term.

If You Don’t Know, Ask Your Cannabis Packaging Partner

It is important to find out if your plastic packaging partner offers alternative resins that are produced from renewable sources or recycled plastics. It is also prudent to partner with a company that is concerned about the impact their business has on the planet. Are they committed to sustainability? And, are they eliminating processes that negatively affect their carbon footprint? What services can they provide that help you do your part?

When you opt to use sustainably produced plastic bottles and closures for your cannabis products, you take an important step to help ensure a viable future for the planet. In a competitive market, this can improve the customer’s impression of your brand, increase consumer confidence and help grow your bottom line. Not only will you appeal to the ever-growing number of consumers who are environmentally-conscience, you will rest easy knowing that your company is taking action to ensure a sustainable future.

July 17, 2019

The Face Of Cannabis Education In Europe

By Marguerite Arnold

No Comments

More than a few cannabis “education companies” – mostly from Canada and the U.S. but some with Israeli ties, plus German and British efforts have targeted Europe as the next logical expansion plan in their global roadmap.

These include most recently Cannvas Medtech Inc., and several initiatives funded by Canopy Growth, including teaching children about the drug. It also includes training programs for frontline staff, launched by Organigram (although in this case it appears to be geared towards “brand education.”)

There are also doctor training programs launching in the UK.

In Germany, there are several efforts underway, helmed by both doctors and cannabis advocates generally, in several cities around the country.

But how effective is all of this “education” in both preventing illegal use, and promoting legitimate sales?

Particularly if such “education” platforms are exported from a foreign market for use in Europe?

Education Is Desperately Needed, But So Is Channel Penetration

Nobody is arguing that “education,” as well as trials and more information for payers and doctors are not required. The problem is that some education is more effective than other campaigns. And most of the talk in most places is more a discussion of the need for further regulatory reform, more trials and more investigation.

That has to get paid for somewhere.

That, at least in Europe is also tricky, as both early educational movers Weedmaps and Leafly have both found out, especially in medical only markets in the EU. Why? There are also highly limited opportunities for advertising either a drug, or to doctors.

Different Regulatory Environments Cause Bigger Issues

Even in Canada and the United States, there is an ecosystem of supplying the demand that has very much grown up customized by the strange paths to reform if not the first mover discussion.

That is not going to be the case in Europe, which in effect creates a brand-new ecosystem to educate, with new players, and every ecosystem participant group has a different kind of educational needs.

Here is one example of where this shows up. So far, in most countries, doctors are still highly resistant to prescribing the drug. Nurses, on the other hand, in both the United States and Canada at least, have proven to be a much more reliable source of converts for the cannabis cause. That approach of course is not possible in places like Germany where only doctors may issue prescriptions, including of the cannabis (and narcotic) kind.

Access issues also play a big role in just about every country- from cost to privacy. And on the privacy front, it is not just foreigners who are getting used to new rules. So are German doctors.

The pharmacy discussion is also very much in the room – and this is not “just like” approaching a “dispensary” from North America. They are regulated chemists. Which causes a whole new set of issues and a serious need for new kinds of educational materials.

In Germany, for example, pharmacists are being recruited and trained by not only staff recruiters specializing in the same, but also sent on special training courses funded by the big Canadian companies (Tilray being the noticeable one recently). The brick and mortar vs. online discussion is also a big topic across Europe. Notably, where it is allowed and where it is, as in Deutschland, verboten.

And, of course, the big green giant in the room everywhere in Europe, in particular, is payer/insurance approvals, which are based on a kind of education called proven medical efficacy.

And that, so far, is in markedly short supply.

In the UK, it is so far the main reason that NHS patients (for example) cannot access coverage for the drug to treat conditions like chronic pain.

In the meantime, the most widespread “education” that is going on, is still mostly at the patient level. Especially when patients sue their insurers, or lobby doctors to prescribe.

The cannabis industry may be maturing, in other words, to be able to answer these questions – but there is also clearly a long way to go.

July 17, 2019

Corporate CBD Production Gets Underway in UK

By Marguerite Arnold

No Comments

Any thought that established British and Canadian growers were not already cooperating and in the throes of establishing a UK cannabis production base was put to bed in early July.

Namely, the news that Sundial, an Alberta based Canadian company, is buying Bridge Farms, the winner of the Overall UK Grower of the Year Award in 2017, is a sign that the age of British cannabinoid production (and in bulk) is here. The agriculture group has a 75-acre production facility in Lincolnshire (strategically on the border with Norfolk) and a recent ₤18 million equity injection.

This also means that large-scale CBD production in the UK is now underway with authority.

What it also means, however, is that the winds of trade, even if historically, are already cultivating some interesting partners as the entire British cannabis discussion gets underway.

Sundial Growers also almost simultaneously filed documents to list on the Nasdaq in the U.S. In this, they look remarkably similar to Tilray.

British Sugar Is Now Not The Only Game In Town

The links to the cannabis industry in this part of the UK are not new. Namely, the county of Norfolk (the east-coast “bump” of the British coastline just south of Lincolnshire) is home to British Sugar, the cultivator for GW Pharmaceuticals cannabis crop.

This part of the world is also historically associated not only with major international British trade, but in the past at least, of the German kind in particular. See the port of Kings Lynn and the Hanseatic trading route that put the eastern town on the global shipping map until the advent of the railroads in the UK leached its importance south, to London in the 19th century.

Foreign investment in agriculture, in other words, in this part of the world is not new. Nor is shipping the final product elsewhere.

What Does This Mean For The British Market?

That is an interesting question on the advent of a potential Brexit. Is this newly constructed agricultural centre designed, like Canopy’s newest hempire in New York State, for domestic consumption, and-or overseas trade?

For that reason, a fully automated CBD production facility in such a strategic and historic part of the country seems to indicate the commercial production of CBD has begun at a level virtually unseen in any other European country so far. And further, that its backers have an international, not just domestic market, in mind.

What Does This Mean For the European Market?

Unless the UK is planning on eviscerating all worker safety and pay regulations, it is unlikely that British-grown cannabis will be price competitive with what is going on in Europe right now. The German market, in fact, is a very good precursor to the kinds of growing pains the UK is likely to see in this regard.

Exports, in other words, are highly unlikely, at least to Europe.

What this does mean however, is that licensed producers, with international roots and global financing, are clearly moving into the more or less corporate production market that is slowly getting going in Britain.

And just like elsewhere, post Canada, there is no chance, at this point at least, for any “mom and pop” industry to develop.

Given a lack of patient access at this point that is also not likely to fly politically for long.

Regardless, as of the summer of 2019, there are beginning to be the signs that large scale production of both THC and CBD, is getting going in Britain.

No matter where their customers are located.

July 16, 2019

How Half-Baked Labels Can Destroy a Cannabis Business

By Greg Boulos

2 Comments

Cannabis manufacturers and consumers are currently in a honeymoon phase. Consumers love their CBD gummies and believe wholeheartedly in the benefits of cannabis-related products. But it is only a matter of time before industrious plaintiffs’ lawyers take a close look at ways to attack manufacturers. We know from other industries that product labels tend to be the entry point for plaintiff lawyers eyeing manufacturers and looking for easy targets. Any company in the business of manufacturing cannabis-related products needs to devote significant time and resources to developing labels that minimize the risk of bet-the-company litigation down the road. Most notably, manufacturers need to think through whether there are any adverse effects associated with their products of which consumers should be aware. Also, manufacturers must scrutinize any “all natural” or “organic” claims on their labels to ensure that they are not misleading consumers.

Failure to Warn of Potential Detrimental Effects

Most manufacturers are well aware of state mandated labels for cannabis products. And, based on the recent FDA public hearing on cannabis, the industry will likely see FDA labeling requirements in the near future. However, simply complying with these requirements does not insulate a manufacturer from litigation, particularly failure to warn claims. One example, dating back to the 1970s, relates to OSHA’s regulation of asbestos-containing products as it became more and more clear that certain types of asbestos could cause a rare form of cancer, mesothelioma. Among other things, OSHA required manufacturers of asbestos-containing products to add a warning to all packaging. The mandated warning included very specific language. Manufacturers largely complied and added the OSHA-mandated label to their product packaging.

Fast-forward 40 years and today, several of those manufacturers are now bankrupt due to litigation based on their alleged failure to warn consumers that asbestos can cause cancer. Plaintiffs have been successful in bringing these claims because the OSHA label only warned that asbestos could cause harm, but it did not mention the word cancer. Some juries have found that the language in the warning was not sufficient to caution end users of the increased risk of developing cancer. While there have also been numerous defense verdicts in asbestos litigation and many asbestos-related cases lack merit – especially against certain defendants – the plaintiffs’ verdicts and legal fees to defend these cases are staggering. Recent plaintiffs’ verdicts have ranged from $20 to $70 million.

Of course, asbestos is an extreme example since CBD has not been associated with an increased risk of developing cancer. But there are other health concerns that manufacturers should consider. For instance, one group of doctors claim to have linked consuming cannabis before the age of twenty-five to development delays. Another study purports to link cannabis consumption to increased risk of premature birth. If there are legitimate studies underpinning these concerns, manufacturers can become the target of potential lawsuits. Beware that when plaintiff law firms find a manufacturer to target, they often file thousands of cases around the country – not just one. Even if the claims are entirely bogus, the legal fees to merely defend these cases are crippling and can lead to a swift bankruptcy.

While there are risks involved with failing to warn consumers of possible adverse effects of a product, manufacturers should not try to mention every alleged adverse effect on its labels. Rather, manufacturers must do their due diligence and investigate whether claimed adverse effects are legitimate, then warn of those that appear to be based on valid scientific studies. Each manufacturer’s research department should assess the credibility of any study linking cannabis use to an adverse health effect and have a candid discussion with their attorneys on whether a warning is warranted. Do not fear lawsuits, they are unavoidable. Rather, work toward ensuring that the company and product(s) have a strong, defensible warning in the event litigation arises.

Questionable “All Natural” and “Organic” Claims

It seems like every CBD product on the market has an “all natural” or “organic” claim on the label. If the product is truly organic, fantastic. Flaunt that organic label. But several food companies have landed in hot water with these labels when there is a hidden ingredient that is not natural. What’s more, manufacturers have been sued when their product contain genetically modified organisms, or GMOs. These lawsuits come in the form of class actions at the state and federal level. Class action litigation is very expensive to defend. And they typically result in settlements for beaucoup bucks – typically multi-million-dollar settlements. Plaintiffs lawyers love these claims because their fees typically also end up in the millions. One example of this kind of class action is a case involving the well-known Kashi brand. Kashi was accused of misleading consumers by including the words “All Natural” on some of its products. Plaintiffs asserted that the products contained bio-engineered, artificial and synthetic ingredients. The class action was settled for $3.9 million.

How can all natural or organic claims lead to millions of dollars in damages? Here is an example of how these cases usually work: A group of consumers determine that an “all natural” product is not “all natural.” Let’s call this Product A and assume it sells for $5 per unit. The consumers then find a similar product that is not labeled “all natural.” That product is $2 per unit. The consumers argue that they overpaid for Product A by $3 per unit because they thought the product was all natural. Three dollars may not sound too bad, but if the class consists of two-million consumers, each entitled to $3, that’s a $6 million damages claim against a company. That does not count the hundreds of thousands of dollars that will be spent on legal fees defending the class action.

Cannabis manufacturers should not use all natural labels loosely and should consult with an attorney experienced in product labeling class actions to determine whether they should forgo these labels. The same is true for any labels that claim a product provides unique health benefits.

Key Takeaway

When manufacturers are excited about introducing a product to the market, trying to compete with other manufacturers and already dealing with miles of regulatory red tape, it may be tempting to avoid self-imposed labeling requirements. But to ensure their businesses are sustainable over the long-term, manufacturers need to take necessary steps now that will limit future litigation risk. The cost of taking preventative measures to develop a meaningful label is considerably less than the types of product labeling verdicts and settlements affecting other industries. Focus on warnings and the use of all natural labels as a starting point. Then speak with an attorney about the unique aspects of your product, potential adverse effects and the adequacy of your warning. We are here to help.

July 11, 2019

Soapbox

Medical Cannabis in Georgia: Federal Policy Effects on State Industries

By Reggie Snyder

2 Comments

Under the U.S. Drug Enforcement Administration’s (DEA) Controlled Substance Act (CSA), drugs are classified into five distinct schedules depending upon their acceptable medical use and their overall potential for abuse or dependency. The DEA currently lists cannabis as a Schedule I drug, which the CSA defines as drugs having no currently accepted medical use and a high potential for abuse. It appears, however, that the DEA may soon reconsider its current Schedule I classification of cannabis.

This article considers how the DEA’s potential reclassification of cannabis potentially could affect Georgia’s medical cannabis industry. Specifically, the article discusses: (1) how Georgia medical cannabis distributors would operate within this new regulatory framework; (2) how this change would affect registered Georgia patients who are either currently purchasing medical cannabis or are planning to do so; and (3) whether this reclassification would cause big pharmaceutical companies to enter Georgia’s medical cannabis market, and if so, how.

The DEA’s Reclassification of Cannabis Would Likely Affect the Regulatory Framework of Georgia’s Medical Cannabis Industry

On April 2, 2019, Georgia became the 34th U.S. state to legalize cannabis for medicinal use when the Georgia Legislature passed House Bill 324 (“HB 324”), which recently took effect on Monday, July 1, 2019. In Georgia, medical cannabis is defined as a “low-THC oil” that contains 5% or less of tetrahydrocannabinol (THC)—the psychoactive chemical in cannabis that causes a “high.”

If the DEA reclassifies cannabis, the regulatory framework of Georgia’s medical cannabis industry under HB 324 would likely be affected. For instance, depending on how the DEA elects to reclassify cannabis, low-THC oil products manufactured and sold in Georgia could become subject to the U.S. Food and Drug Administration’s (FDA) costly, complicated and time-consuming drug approval process. Then, any low THC oil products that the FDA approves will be subject to federally mandated quality, efficacy and potency standards for FDA-approved drugs. Also, any federal standards that stem from the DEA’s reclassification of cannabis will trump any conflicting provisions in HB 324 or any other conflicting rules, regulations or procedures established by the Georgia Access to Medical Cannabis Commission (GAMCC), the seven member state agency responsible for promulgating and implementing the state-based rules, regulations and procedures necessary to produce and distribute low-THC oil in Georgia, and the Georgia State Board of Pharmacy (Pharmacy Board). However, even if the DEA reclassifies cannabis, the following state regulatory framework established by HB 324 will remain unaffected:

The GAMCC will likely continue to oversee the state’s medical cannabis industry.
The following two different types of dispensary licenses issued under the legislation will still likely remain: retail outlets (issued by the GAMCC) and pharmacies (issued by the Pharmacy Board).
Licensed dispensaries will still likely not be located within a 1,000-foot radius of a school or church, and licensed production facilities will still not be located within a 3,000-foot radius of a school or church.
Pharmacists who dispense low-THC oil will still likely have to review each registered patient’s information on the state’s Prescription Drug Monitoring Program (PDMP) database to confirm that they have been diagnosed with one or more of the 17 approved conditions and diseases. The legislation does not require retail outlet dispensaries to review patient information on the PDMP database or employ a pharmacist to dispense the drug.
Registered patients will still likely be prohibited from vaping low-THC oil or inhaling it by any other electronic means. The legislation does not expressly prohibit the use of other, non-electronic delivery methods of low THC oil such as pills or nasal spray.
All licensed dispensaries (and all licensed production companies) will still likely be subject to an “on-demand” inspection when requested by the Georgia Bureau of Investigation (GBI), the GAMCC, the four-member Medical Cannabis Commission Oversight Committee (MCCOC), or local law enforcement. The GAMCC and the Georgia Drugs and Narcotics Agency (GDNA) will also still likely be able to conduct one, annual inspection of dispensary locations. And, upon request, licensed dispensaries will still likely be required to immediately provide a sample of their low-THC oil for laboratory testing to the GBI, GAMCC, MCCOC, GDNA or local law enforcement.
All licensed dispensaries (and all licensed production facilities) will still likely be required to utilize a GAMCC-approved seed-to-sale tracking software.
All licensed dispensaries (and all licensed production companies) will still likely be prohibited from advertising or marketing their low-THC oil products to registered patients or the public. However, they will still likely be allowed to provide information about their products directly to physicians, and upon request, physicians will still likely be allowed to furnish the names of licensed dispensaries (and licensed production companies) to registered patients or their caregivers.

The DEA’s Reclassification of Cannabis Would Likely Affect the Availability of Low THC Oil

To date, approximately 9,500 Georgians are registered with the state’s Low-THC Registry, which allows them to purchase low-THC oil from licensed dispensaries. Since the legislation’s passage, the number of registered patients has increased significantly and continues to steadily rise. If the DEA reclassifies marijuana, this patient number will likely increase at an even faster rate because the public will likely perceive reclassification as an acknowledgement by the federal government that marijuana possesses health and medicinal benefits. If that occurs, statewide demand for low THC oil could quickly outstrip the supply.

Georgia Gov. Brian Kemp
Image: Georgia National Guard, Flickr

Under HB 324, the GAMCC is tasked with ensuring that the state has a sufficient number of retail outlet dispensaries across the state to meet patient demand but is limited to issuing only six production licenses. As the number of registered patients continues to grow, the GAMCC may be forced to recommend amendments to the statute allowing it to issue additional production licenses to increase the state’s supply of low THC oil, and depending on how many additional patients are added to the state’s Low-THC Registry, the GAMCC may also have to issue additional dispensary licenses to keep up with patient demand by relaxing the geographic limitations on locating dispensaries.

Thus, the DEA’s reclassification of cannabis likely would affect the amount of low THC oil available to registered patients in Georgia.

The DEA’s Reclassification of Cannabis Would Likely Cause Large Pharmaceutical Companies to Enter Georgia’s Medical Cannabis Market

Large pharmaceutical companies typically manufacture, market, sell and ship their products on a national and international scale. Given cannabis’ current status as a Schedule I drug under the CSA, these companies have largely steered clear of the burgeoning medical marijuana industry because of the inherent risk of violating federal law. If the DEA reclassifies cannabis, that risk will be diminished greatly, and the companies therefore will likely decide to enter the market by acquiring existing medical marijuana companies with established national or state-level medical cannabis brands.

If the DEA reclassifies cannabis, Georgia’s medical cannabis market will likely be affected in multiple ways.Depending on how the DEA reclassifies cannabis, low-THC oil in Georgia could be subject to stringent federal standards, including the FDA’s complex and expensive drug approval process. Georgia medical cannabis companies will likely not be accustomed to complying with such federal regulations. Large pharmaceutical companies, on the other hand, are very accustomed to dealing with the federal government, including FDA drug approval. So, if the DEA reclassifies marijuana, pharmaceutical companies will likely view reclassification as a tremendous opportunity to enter the Georgia market by leveraging their experience and institutional knowledge dealing with federal law to acquire or partner with a licensed Georgia cannabis company that has an established brand of low -HC oil.

Entering Georgia’s medical cannabis market won’t be easy, however, because HB 324 prohibits licensees from transferring their licenses for five years and requires that the original licensee be a Georgia business. But, HB 324 does not prohibit them from selling their businesses, which necessarily includes any licenses the business owns. Purchasing a licensed Georgia medical cannabis company requires payment of a production license business transfer fee. The fee for the first sale of a business with a Class 1 production license is $100,000 and the fee for a Class 2 license is $12,500. The fee for the second sale is $150,000 for a Class 1 production license, and $62,500 for a Class 2 license. The fee for the third and fourth sales is $200,000 for a Class 1 production license, and $112,500 for a Class 2 license.

Conclusion

If the DEA reclassifies cannabis, Georgia’s medical cannabis market will likely be affected in multiple ways. Specifically, depending on how the drug is reclassified, the regulatory framework for medical cannabis companies likely will change to include both state and federal requirements, potentially including the FDA’s complex drug approval process. Also, the amount of low-THC oil available for registered patients to purchase likely will be diminished precipitating the need for the GAMCC to modify the statute to allow for issuing additional production licenses and relaxing the geographic limitations on locating dispensaries. Finally, large pharmaceutical companies likely will attempt to enter Georgia’s medical cannabis market by purchasing existing, licensed Georgia companies that have established low-THC oil brands.

July 11, 2019

Tilray Imports Medical Cannabis Oil In Bulk To UK

By Marguerite Arnold

1 Comment

Tilray has managed to successfully import its first bulk supply of medical cannabis oil into the UK.

It was a Tilray product, in fact, that was not only confiscated at the border last year – but subsequently sparked media outrage over the denial of the same to one Billy Caldwell, an epileptic child. It was not the only outcry nor was Billy the only child endangered. And the British people, in fact, finally signalled that they had lost their stiff upper lip on this one last year.

All of this despite lingering and significant problems ever since. Not to mention an intriguing and well-timing market entry for Tilray right after things have been heating up on cannabis reform in Parliament of late.

The Tilray product, which will be imported from its new production facilities in Portugal, has already been distributed in other European countries, including Croatia and Germany.

What is significant in other words, is that the UK is starting to allow bulk orders in through customs- and they are coming not from Canada, but from Europe. Even if it is a Canadian company’s brand on the same, for now at least.

Tilray of course, is not the only company engaged in a race to get imports into the country. Right after Christmas last year, Canopy/Spektrum announced the same plans. Wayland has clearly been angling for a British outpost for some time. And of course, more locally initiated groups, including European Cannabis Holdings, have been working to initiate easier access to British markets for well over a year. Let alone more locally grown interests and pursuits now clearly lining up for market entry.

But this announcement, coming so shortly after all the recent activity on cannabis reform and calls for trials in the UK, clearly means that the doors are now opening fast for the largest players angling to get in.

Bottom line? Look for the biggest Canadians with an already established European presence, to begin making similar announcements this summer.

Being “Available” Is Only The First Hurdle

One of the biggest problems facing not only the “industry” but patients in the UK, much like elsewhere, is that doctors do not know or want to prescribe cannabis and cannabinoid medicines- and for reasons stemming from fear or ignorance about medical efficacy to insurance coverage.

Medical cannabis, in all its forms so far, however, is also highly expensive and out of reach for most unless they obtain an NHS approval (or as in Germany, statutory health insurer approval) to actually obtain the drug. And then have a place to obtain it.

This basically counts out everyone who cannot pay out of pocket and cannot find a willing doctor to sign them up via onerous and ongoing paperwork. And that, of course, is the majority of the sick people in the room.

It is this basic conundrum, which the bigger Canadians have yet to solve themselves (and it is becoming more of a recognized issue in the U.S. in the days, presumably, before the 2020 election which will hopefully set a timetable for federal reform) that has been in the room for the last two years thanks to Germany.

Image credit: Flickr

It is even more of an issue in the UK. Especially with a renegotiation in Britain’s diplomatic and trade relationship with the rest of the world.

That includes, as of mid-July, a downright, undiplomatic spat between the White House and Whitehall right now over leaked comments from the British Ambassador to Washington – and about matters of competency far from cannabis. Although of course, this issue is in the room.

For that reason, the Canadian as well as the European connection to imports right now (from not just Portugal but Holland) on the medical side of the ledger, spell an intriguing fall for not only cannabis, but the real shape and direction of British politics- and by extension- British trade.

Patients Are Taking It To The Streets And To Parliament

As much as patients have so far partnered with the big Canadian companies in the attempt to get the borders open, this is not the only game in town. Dutch imports, from Dutch companies, are already showing up in the UK (see Bedrocan). And both British and Irish growers are getting in on early action, even if for now “just” on the CBD side.

Furthermore, it is clear that patients are playing a large role in making sure that they are being heard, even to the point of putting pressure on doctors. In an extraordinary admission at the parliamentary level during the last week of June, lawmakers conceded that the British public was taking matters into their own hands. And furthermore, that the change in the law had led to clear expectations that were not being met.

Namely, British patients are literally demanding medical cannabis by prescription from their doctors.

And much like in Germany, with a mandate for coverage, the government is being forced to listen, and as best as it can in a severely crimped and politicized Brexit environment, respond.

While cannabis reform is hardly the Guy Fawkes, in other words, in a tinder match environment that British politics certainly is right now, it might be a kind of spark that drives a much wider conversation in the UK about current events.

Specifically the survival of a system that is poised to provide not only access to cannabis but comprehensive medical care beyond that, even for the old or chronically ill.