Cannabis, we have a problem. Legalizing adult use cannabis in California caused the demand for high-potency cannabis to increase dramatically over the last several years. Today, many dispensary buyers enforce THC minimums for the products that they sell. If smokeable flower products don’t have COAs proving the THC levels are above 20% or more, there is a good chance many dispensaries won’t carry them on their shelves. Unfortunately, these kinds of demands only put undue pressure on the industry and mislead the consumer.
Lab Shopping: Where the Problems Lie
Lab shopping for potency analysis isn’t new, but it has become more prevalent with the increasing demand for high-potency flower over the last couple of years. Sadly, many producers submit valid, certified COAs to the California Bureau of Cannabis Control (BCC), which show two to three times the actual potency value.
At InfiniteCAL, we’ve purchased products from dispensary shelves and found significant discrepancies between the analysis we perform and the report submitted to the BCC by the producer. So, how can this happen? Several factors are creating the perfect storm in cannabis testing.
Problems with Potency
Many consumers still don’t understand that THC potency is not the only factor in determining quality cannabis, and they are unwittingly contributing to the demand for testing and analysis fraud. It is alarming for cultivation pioneers and ethical labs to see producers and profit-hungry testing facilities falsifying data to make it more appealing to the unaware consumer.
Basically, what’s happening is growers are contacting labs and asking, “I get 30% THC at this lab; what can you do?” When they see our COA reporting their flower tested lower than anticipated, they will go to another lab to get higher test results. Unfortunately, there are all too many labs that are willing to comply.
I recently saw a compliant COA that claimed that this particular flower was testing at 54% THC. Understanding cannabis genetics, we know this isn’t possible. Another product I reviewed claimed that after diluting an 88% THC distillate with 10-15% terpenes, the final potency test was 92% THC. You cannot cut a product and expect the potency to increase. Finally, a third product we reviewed claimed 98% total cannabinoids (while only looking at seven cannabinoids) with 10% terpenes for a total of 108% of the product.
These labs only make themselves look foolish to professionals, mislead laymen consumers and skirt under the radar of the BCC with basic mathematical errors.
The Pesticide Predicament
Frighteningly, inflating potency numbers isn’t the most nefarious testing fraud happening in the cannabis industry. If a manufacturer has 1000 liters of cannabis oil fail pesticide testing, they could lose millions of dollars – or have it retested by a less scrupulous lab.
Photo: Michelle Tribe, Flickr
As the industry continues to expand and new labs pop up left and right, cultivators and manufacturers have learned which labs are “easy graders” and which ones aren’t. Certain labs can miss up to ten times the action level of a pesticide and still report it as non-detectable. So, if the producer fails for a pesticide at one lab, they know four others won’t see it.
In fact, I’ve had labs send my clients promotional materials guaranteeing compliant lab results without ever receiving a sample for testing. So now, these companies aren’t just tricking the consumer; they are potentially harming them.
An Easy Fix
Cannabis testing is missing just one critical factor that could quickly fix these problems – checks and balances. The BCC only needs to do one of two things:
Verifying Lab Accuracy
InfiniteCAL also operates in Michigan, where the Marijuana Regulatory Agency (MRA) has already implemented a system to ensure labs are maintaining the highest testing standards. The MRA will automatically flag all COAs which test above a certain percentage and require the product to be retested by multiple labs.
Labs are required to keep a back stock of material. So, when test results come back abnormally high from Lab A, then Labs B, C and D are commissioned to retest the material to compare data. If Lab A reports 40% THC, but the other labs all report 18%, then it’s easy to see Lab A has made an error.
Secret Shopping
By simply buying products off the shelves and having them blind-tested by other labs, it would be simple for the BCC to determine if the existing COA is correct. They already have all the data in Metrc, so this would be a quick and easy fix that could potentially solve the problem overnight.
For example, at InfiniteCAL, we once purchased 30 samples of Blue Dream flower from different cultivators ranging in certified COA potencies from 16% to 38%. Genetically, we know the Blue Dream cultivar doesn’t produce high levels of THC. When we tested the samples we purchased, nearly every sample came back in the mid-teens to low 20% range.
Labs Aren’t Supposed to Be Profit Centers
At InfiniteCAL, we’ve contacted labs in California where we’ve uncovered discrepancies to help find and flush out the errors in testing. All too often, we hear the excuses:
“If I fix my problem, I’ll lose my clients.”
“I’m just a businessman who owns a lab; I don’t know chemistry.”
“My chemist messed up; it’s their fault!”
If you own a lab, you are responsible for quality control. We are not here to get rich; we are here to act as public safety agents who ensure these products are safe for the consumer and provide detailed information about what they choose to put in their bodies. Be professional, and remember you’re testing for the consumer, not the producer.
With data forecasting expert BDSA predicting that the global cannabis market will reach $56B by 2026, there is no time to waste. Whether it’s Oklahoma, New York or even Macedonia, the frenzy is on. Investment decisions are immediate, and you have to be correct out of the box. This is where an expert like Andrew Lange and his company, Ascendant Management, come in. Andrew has designed more than 1.5 million square feet of cannabis facilities and moved them into profitable production in North America and Europe. One of his active customers is Onyx Agronomics in Washington. Bailee Syrek is the director of operations at Onyx and this is the story of the key points in designing a precision cannabis facility with state-of-the-art efficiency.
Background
Andrew Lange, a navy veteran, runs a global cannabis consulting business based in Washington. With a “prove it to me” approach, he regularly tests the best new technologies in the facilities he designs. He integrates his knowledge of what works in practice into his subsequent facilities. One of his previous projects, Onyx Agronomics in Washington, started in 2014 and moved quickly into production in a retrofitted warehouse. Many of his best ideas started with Onyx, including some new innovations in the latest expansion there this month. Onyx is a tier 3 cannabis cultivator.
Bailee Syrek’s operation at Onyx currently produces 9,000 lbs. of dry trim bud per year in 8,000 square feet of canopy. She operates the state-of-the-art, clean room style, indoor grow facility around the clock, delivering 2.7 grams/watt from every square foot of canopy in her building. She runs a highly efficient facility.
Onyx has had an ongoing relationship with Ascendant Management and chose to leverage them again with their current expansion to increase their capacity further. Onyx uses a range of advanced technologies including aeroponic cultivation equipment and control software from AEssenseGrows to hit their metrics.
Precision, Quality & Consistency
“I look for ways that my clients can differentiate themselves,” says Lange. Maybe it’s his military background, but Andrew demands precision, quality and consistency in the operations he designs. “Cannabis is a just a plant really so we look for the highest performance grow methodology. I find that to be AEssenseGrows aeroponics,” says Lange. “The AEtrium Systems provides a good foundation to manipulate for grow recipes and business process. I add teamwork, communications, and operations procedures to that foundation.”
At Onyx, Bailee Syrek works closely with her channels. She invites her customers in regularly to review the Onyx cultivars and to cover their ideal requirements. These can range from bud size for their packaging to THC or terpene profiles (Yes, channels do want both higher and lower THC content for different consumers and price points). Based on that feedback, Bailee and Andrew work together to dial in the ideal grow recipe in the AEssenseGrows Guardian Grow Manager central control software. They push their target strains to optimize the results in the direction requested by their customers. For example, “How do you get the highest possible THC out of 9lb Hammer?” You’ll have to ask Andrew and Ascendant Management.
Driven by customer requests, Onyx is adding new strains to build on their innovative brand. Bailee expects to reach new levels of terpene bundles with Cheeseburger Jones, Koffee Breath, Shangri-La and OK Boomer. Utilizing Andrew’s expert knowledge, they can take typical sub-20% cannabinoid bundles and improve them using aeroponics and better controls, into standout aeroponic 30% packages.
The Onyx Vision
Andrew Lange, Ascendant Management
Bailee Syrek believes this is the most exciting time yet for Onyx. Delivering premium grade cannabis as a white label flower supplier for years, Onyx is a profitable and successful business. But even with doubling capacity every year, they are still having trouble keeping up with customer demand. Bailee wants to get to the point where she can always say yes and accept an order from their white label customers. With this objective, she again engaged Ascendant and Andrew to get beyond 15,000 lbs. of output in 2021 to make her customers happier. Beyond that basic expansion, she is also ambitious and is preparing plans for additional lines of revenue with their own proprietary flower, oil and derivative products.
“This expansion will be a new challenge,” says Syrek. “Flower production is in our wheelhouse. We have tighter operations, with the most consistent bud size, terpenes and test results in our state. These new products will require that same quality but now in new areas.”
Her Path to Leadership
Bailee started with Onyx in a compliance position that grew out of the constant demands for government licensing and reporting. In that compliance role, she had the opportunity to work a bit in every department, giving her a good understanding of all of the facility operations and workflows. All of that experience led her to eventually take over the operations leadership role. She instills care and effort to maintain the cleanest and most efficient operations possible. “With aeroponics, we don’t have to lug soil from room to room or in and out of the facility. This saves us a ton of work that we can redirect to plant health and maintenance,” says Syrek. “Medical precision and GMP quality is a given. Each room on average is 105 lights and one room manager and one cultivation technician take the room from clone/veg transfer to harvest as a two-person team.”
Bailee Syrek, director of operations at Onyx Agronomics
Bailee prides herself with results. “Medical grade precision is normal for us. We use medical grade SOPs for every aspect of our production.” Bailee has designed these guides into their control system that runs on the Guardian Grow Manager software. From sensor tracking, to performance graphs to time cards; everything is integrated in her performance monitoring.
A quality focus is very apparent in every Onyx flower room. Every watt of light energy is transferred to the pristinely manicured canopy. Naked stems feed nutrients up to the fat buds at the trained canopy surface. Fan leaves are removed and all possible energy turns into bud weight and potency. The room technician has a passion for plant health, table care and plant maintenance all the way through to the harvest bonanza.
What is the biggest challenge for Bailee as she drives the operation? Even at 105-110 grams per square foot per harvest, they are sold out. “Every customer wants to buy beyond our capacity. It is a good problem to have,” Bailee says. “Customers want our quality and love the consistency. This is the most exciting thing about our expansion. We will finally be able to make additional channels happy with high quality supply.”
This is where Andrew credits Onyx’s performance. “Most well running operations deliver 1.1-1.8 grams of dry trim bud per watt of electricity used in powering a grow room,” says Andrew. The Onyx grow formula results leave this in the dust. Running Fluence SPYDR 2i grow lights and the AEtrium System aeroponics, Onyx plants are delivering just shy of 4 lbs. per light with every harvest cycle. At 630 watts max output, that delivers ~2.7 grams/Watt, the most efficient operation he has seen. The Onyx process and execution works.
“Bailee is a great example as a professional. She builds a motivated team that executes better than her competition,” says Andrew.
At the same time, Onyx runs a highly space efficient nursery with just enough mother plants feeding energetic cuttings into the 4-layer stacked AEtrium-2.1 SmartFarms in their environmentally controlled clone room. They produce more than enough healthy clones to jump from veg to flower in the span of a week. Grow time, harvest turn time and no veg space, results in very efficient use of power in the complete operation.
Mirroring Onyx for Medical Grade Cannabis in Europe
Andrew Lange’s current passion is a green-field project in Portugal. Self-funded, Andrew says that this facility will be one of the first that is pure enough in operations to supply non-irradiated clean-room-level-quality cannabis beyond the precise standards required by European regulators. Current importers have not been able to clear the European standards for cleanliness without irradiating their buds. Other companies like Aurora have abandoned efforts to access the market due to the precision requirements. Typical methods used for fruit imports use gamma radiation to get bacterial counts down. This was tried with cannabis to sterilize buds, but the problem with cannabis is this degrades the quality of the flower.
Andrew’s Portugal facility will be using a sterile perimeter surrounding his grow space (mothers, clones/veg, flower rooms) and harvest and processing areas (dry, trim, packaging). Andrew creates a safe environment for healthy production. A steady harvest cleaning regimen is built into his operational designs from the beginning. All operators are trained in procedures to exclude pathogens and limit all possible transmission (airborne, physical/mechanical touching, or water carried). Every area is cleaned during and between harvests. Andrew is confident he will reach a consistent level of accuracy and purity beyond European requirements because it is routine in all of his designs.
Certified Efficiency is the Message
Good Manufacturing Practices (GMP) and Good Agricultural and Collection Practices (GACP) are required for certification and access to European markets. Andrew always builds tight operations, but in this case, his Portugal facility is designed with the fit and finish to be GMP and GACP compliant from day one with advanced air filtration and air management throughout.
Automated aeroponics is a foundation technology that Andrew recommends for his facility designs. The automatic data logging, report generation, cloud access and storage make this a foundational technology. Andrew does get some resistance from cultivators that are used to the classic soil media approaches but he explains that software configurable grow recipes, precision controls, zero soil/no pests and hyper-fast growth makes aeroponics the foundation of competitive advantage. Precisely controlled medical quality precision operations are built on top of this foundation.
The initial phase of the Portugal facility is 630 lights and this facility is Andrew’s latest personal investment. From secure perimeters to modular grow rooms and highly automated equipment, this location will be state-of-the-art in terms of grams/watt yields and renewable energy with an output of 6 metric tons per year. Solar powered electricity from a 4-megawatt farm will use Tesla megapacks for storage and be grid independent.
Technology & Innovation, Onyx & Ascendant
From his first experience with AEssenseGrows aeroponics, Andrew has been able to design complete grow recipes in the Guardian Grow Manager software with very tight precision on dosage. This makes it possible to create ideal recipes for each strain (nutrition, irrigation cycles, lighting and environmental management). This frees up the operations teams to focus on plant health and execution. The nutrients, pH, CO2, temperature and humidity, follow the Guardian directions that he sets.
Working with Bailee at Onyx, Andrew is now consulting on the post-harvesting side of operations (drying, trimming, extracts and packaging). In parallel with his efforts, Bailee is optimizing THC & terpene production on the cultivation side with UV lighting (considering far-right red frequency light recipe enhancements).
That is the Ascendant Management approach to innovation. Trial, test constantly, perfect ideas in practice. Optimize the results for consistent, high-quality results. Even while driving for the personal craft touch, use automation to increase efficiency of mundane, but important tasks. With these methods, Andrew believes that the Onyx labor cost is one third of typical soil media grow operations. Zero soil aeroponics offers many benefits. Bailee’s team is able to give each plant more attention and delivery better quality. Automation is a win-win for them.
Bailee finds that constant testing is useful for two things: one, great results, and two, surface the best talent with their hand’s-on approach.
Always Finish with People
Bailee says that her staff works incredibly hard. “We are a different grow, with better ergonomics on the job, aeroponics for precision and yields, and advanced technology at the leading edge in every part of our grow. No dirt up and down stairs. People are proud to work here. We are not your dad’s grow operation.”
“We promote from within. Everyone starts as a room tech and has the opportunity to move up. Teams are isolated by rooms so there is no contamination between rooms or humans. Put in the work, and you will get promoted with expansions, and grow with the company as we take a bigger share in the market.” Female employees make up almost half of the current staff, and Bailee encourages employees to refer their friends. “Good people invite good people,” she says.
Her training program introduces the technical aspects of their unique operation, the positive expectations and career path for every new employee. The social environment is friendly with good pay and regular raises. Each new employee fills a range of roles during their 1-month training circuit and are assigned to a cultivation space under a lead as an official cultivation tech at the end of 30 days. “One thing that we do more than at other grows is constant cleaning,” says Bailee. “This is an ever-present mantra for the staff.”
The cannabis industry’s advancement towards legalization continues to dominate national headlines, from the stance of incoming Attorney General Merrick Garland to deprioritize enforcement of low-level cannabis crimes, Senate Majority Leader Chuck Schumer’s continued advocacy, to the recent passing of legislation in New York, New Mexico and Virginia (the first in the South) to authorize adult-use cannabis. While these updates are likely to intrigue customers and investors alike, they are also sure to draw the attention of cyber criminals who could look at the relative youth of the industry, as well as its rapid growth, as a prime target of opportunity for nefarious acts.
In order to understand risk mitigation best practices across a wide spectrum of private sector industries, this article will first identify the current security environment in order to understand the threats, briefly highlight specific case studies and assess the risks and identify methods that individual organizations, as well as the cannabis industry as a whole, can take action to enhance security and preparedness and to develop resiliency against future attacks.
Understanding the Threats
For an industry that has operated in a largely cash-based system for much of its existence, the idea of security is not foreign. Typically, these concerns focused on physical security implementation. The topic has received plenty of coverage, including a recent article in this journal articulating Important Security Considerations When Designing Cannabis Facilities. While an audit of physical security measures is a valuable part to any all-hazards threat assessment, securing a growing online network – from email to online finances to connected devices within cannabis facilities – can pose more unfamiliar challenges. When consulted for this article, Patten Wood, a former VP of marketing for a prominent west-coast cannabis retail brand noted: “While the topic of cybersecurity is critically important to customers, businesses, and the industry at large, it isn’t top of mind for many of the cannabis companies that I’ve experienced.” Understanding what risks are present is the first step to mitigating them, so we must first discuss several common cyber threats for the cannabis industry.
Phishing: Phishing happens when cybercriminals impersonate a trusted individual or entity, typically through email. The goal in this instance is to get the target to share confidential information or download software that can allow unauthorized access into an organization’s network. Phishing is one of the most common types of cyberattacks as it is relatively easy to conduct and surprisingly effective.
Ransomware Attacks: Ransomware attacks are used to gain access to a computer network and then lock and encrypt either the entire system or certain sets of high-value files, which can compromise important business information, and impact client and vendor privacy. A ransom is then demanded for restoring access, but paying the ransom comes with its own risk as it doesn’t guarantee the files will be restored.
Cyber Extortion: Similar to ransomware attacks in their design, cyber extortion typically deals with a threat of leaking personal information and will generally demand payment in cryptocurrency in order to maintain their anonymity.
Lumu: 2020 Ransomware Flashcard
Remote Access Threats: As 2020 has forced organizations to rethink how they conduct business and shift to more remote operations than they had in the past, it can open up several new threats. According to a survey by IT social network SpiceWorks.com, six out of every ten organizations allow their employees to connect their company-issued devices to public Wi-Fi networks. Utilizing unsecured Wi-Fi networks opens the user up to man-in-the-middle attacks, allowing hackers to intercept company data. Unsecure Wi-Fi also brings the threat of malware distribution. An additional consideration with remote workers is the uptick in cyber attacks against remote access software referred to as remote desktop protocol (RDP) attacks. According to Atlas VPN, RDP attacks skyrocketed 241% in 2020 and we’ve seen numerous RDP attacks against critical infrastructure throughout the pandemic and across all industries.
Internet of Things (IoT) Leaks: With IoT devices running everything from security systems to automated growing operations, the convenience has been a huge boost for the industry. Unfortunately, many IoT devices don’t have sophisticated built-in security. Another common problem is the tendency of users to keep default passwords upon installation, which can make devices easy for cyber criminals to access. Once they are inside the system, malware can easily be installed, and the actors can move laterally throughout the network.
Personal and Medical Record Security: Many cyberattacks expose some level of personal data, whether that be customer, employee or vendor information. An extra consideration for retail operations that either treat medical patients, or medical and adult-use customers, is the additional information they must store about their clients. Medical facilities will maintain protected health information (PHI), which are much more valuable on the dark web than personally identifiable information (PII). But even adult use facilities may keep government-issued ID or other additional information above that of a typical retailer, which makes the potential value of their information much more intriguing for a cybercriminal.
Assessing the Risks
Depending on where your organization lies in the seed to sale chain, you will have different levels of risk for various types of attacks. We briefly discussed ransomware attacks earlier. Ransoms can range widely depending on the size of the organization that is attacked, but the ransom alone isn’t the only risk consideration. Businesses must also factor in the cost of downtime (an average of 18 days in 2020) caused by the ransomware when evaluating the impact to business operations, as well as reputation. While small – medium businesses are absolutely at risk, especially given their relative lack of cybersecurity resources and sophistication, a recent trend involves “Big Game Hunting” where cybercriminals are targeting larger organizations with the potential for bigger paydays. Criminals understand that big business can rarely afford major delays, and may be more able and willing to pay, and pay big, for a return to normal operations.
Group-IB: Ransomware Uncovered
Below are several examples of attacks which have either directly impacted the cannabis industry, or have valuable lessons the industry can learn from.
GrowDiaries: In October 2020 researcher Bob Diachenko discovered that 3.4 million records including passwords, posts, emails and IP addresses were exposed after two open-source application Kibana apps were left exposed online. As a platform for cannabis growers around the world (who are not all growing legally), this type of exposure puts the community at great risk, and can lower user confidence in the product, as well as putting them at personal risk of harm or legal ramifications. The applications being left open is a prime example of either a lack of good cybersecurity policies, or not following through on those policies.
Aurora Cannabis: On December 25th, 2020 Canadian company Aurora Cannabis suffered a data breach when SharePoint and OneDrive were illegally accessed. Included in the data that was compromised was credit card information, government identification, home addresses and banking details. The access point coming through Microsoft cloud software is a prime example of some of the challenges facing businesses who have an increasingly remote workforce yet still need that workforce to access critical (and usually highly sensitive) information.
THSuite: A database owned by seed to sale Point-Of-Sale (POS) software provider THSuite was discovered by researchers in December 2019. The database contained PHI/PII for 30,000 people, with over 85,000 files being exposed. The information that was left accessible included scanned government IDs, personal contact information and medical ID numbers. Clearly this gets into HIPAA territory, which can result in fines of up to $50,000 for every exposed record.
Door Dash: As cannabis delivery apps become more prevalent, it’s good to reference how similar businesses in other industries have been targeted. In May of 2019 nearly 5 million user records were accessed by an unauthorized third party, exposing PII and partial payment card information.
Taking Action
On an organizational level, employee training, password hygiene and malware protection are some of the basic and most important steps that should be taken by all organizations. But, if “knowledge is power,” the best defense for any organization against cyber threats is a well-informed organization- including leadership down to the front-line employees. Excellent tools to assist in this are Information Sharing & Analysis Centers/Organizations (ISACs/ISAOs). ISACs were established under a presidential directive in 1998 to enable critical infrastructure owners and operators to share cyber threat information and best practices. The National Council of ISACs currently has over 20 member ISACs including Real Estate, Water, Automotive and Energy. ISAOs were created by a 2015 executive order to encourage cyber threat information sharing within private industry sectors that fall outside of those listed as “critical infrastructure”. Christy Coffey, vice president of operations at the Maritime and Port Security ISAO (MPS-ISAO) says information sharing enabled by the executive order is critical. “We need to accelerate private sector information sharing, and I believe that the ISAO is the vehicle.”
According to Michael Echols, CEO of the International Association of Certified ISAO’s (IACI) at the Kennedy Space Center, security experts have long understood that threat information sharing can allow for better situational awareness and help organizations better identify common threats and ways to address them. “On the other side, hackers in a very documented way are already teaming up and sharing information on new approaches and opportunities to bring more value (to their efforts).” The ongoing crisis surrounding the Microsoft Exchange Server Vulnerability demonstrates that different cybercriminal groups will work simultaneously to abuse system flaws. As of March 5th it was reported that at least 30,000 organizations in the U.S. – and hundreds of thousands worldwide – have backdoors installed which makes them vulnerable to future attacks, including ransomware.
Below are several links to recent products that have been shared by various ISACs/ISAOs, which are provided as an example of the type of information that is commonly shared via these organizations.
If organizations are interested in learning more about enhancing their cybersecurity resiliency through private-sector led information sharing, please reach out to the newly formed Cannabis ISAO at ben@cannabisisao.org
The word “hemp” has many meanings. Historically the term has been used as the common name for the Cannabis sativa L. plant. Just like other plants, the cannabis plant has two names, a common name, hemp, and a scientific name, Cannabis sativa L. After the ratification of the UN Single Conventions on Narcotic Drugs and Psychotropic Substances, in 1961 and 1972 respectively, the term started to be used to distinguish between resin producing varieties of the cannabis plant and non-resin producing varieties of the cannabis plant. Nowadays the term is generally used to refer to cannabis plants with a delta-9-tetrahydrocannabinol (d9-THC), a controlled substance, content equal to or less than the maximum allowable limit defined by each marketplace.
Tetrahydrocannabinol (THC), just one of hundreds of cannabinoids found in cannabis.
In the United States and Canada, the limit is defined as 0.3% on a dry weight bases, and until November 2020, in the European Union, the limit was defined as 0.2%. After years of effort the “hemp” industry in Europe was successfully able to get the limit raised to 0.3% to be in line with the United States and Canada – creating the largest global trade region for hemp products. But there exist several marketplaces around the world where, either through the consequences of geographic location or more progressive regulations, the d9-THC content in the plant can be substantially higher than 0.3% and still considered “hemp” by the local authority.
To address these variances, ASTM International’s Technical Committee D37 on Cannabis has been working on a harmonized definition of hemp, or industrial hemp, depending on the authority having jurisdiction, through the efforts of its Subcommittee D37.07 on Industrial Hemp. The following is a proposed working definition:
hemp, n—a Cannabis sativa L. plant, or any part of that plant, in which the concentration of total delta-9 THC in the fruiting tops is equal to or less than the regulated maximum level as established by an authority having jurisdiction.
Discussion: The term “Industrial Hemp” is synonymous with “Hemp”.
Note: Total delta-9 THC is calculated as Δ⁹-tetrahydrocannabinol (delta-9 THC) + (0.877 x Δ⁹-tetrahydrocannabinolic acid).
This definition goes a long way to harmonize the various definitions of hemp from around the world, but it also defines “hemp” as a thing rather than as a classification for a type of cannabis plant or cannabis product. This is a concept rooted in the regulatory consequences of the UN Single Conventions, and one I strongly disagree with.
The definition also leaves the total d9-THC limit open-ended rather than establishing a specified limit. An issue I will address further in this series.
Can “hemp products” only come from “hemp plants”?
If you are an invested stakeholder in the traditional “hemp” marketplace, you would say, yes.
But are there such things as “hemp plants” or are there only cannabis plants that can be classified as “hemp”? (The definition for hemp clearly states that it is a cannabis plant…)
A field of hemp plants, (Cannabis sativa L.)
There is no distinction between the cannabinoids, seeds, and fibers derived from a cannabis plant that can be classified as “hemp” and those derived from a cannabis plant that cannot. The only difference is the word: “cannabis,” and the slew of negative connotations that come along with it. (Negative connotations that continue to be propagated subconsciously, or consciously, whenever someone says the “hemp plant” has 50,000+ uses, and counting, and will save the world because it’s so green and awesome, but not the “cannabis plant”, no that’s evil and bad, stay away! #NewReeferMadness)
The declaration that “hemp products” only come from “hemp plants” has some major implications. “Hemp seeds” can only come from “hemp plants”. “Hemp seed oils” can only come from “hemp seeds”. “Hemp fibers” can only come from “hemp plants”. Etc.
What does that really mean? What are the real-world impacts of this line of thinking?
Flat out it means that if you are growing a cannabis plant with a d9-THC content above the limit for that plant or its parts to be classified as “hemp”, then the entire crop is subjected to the same rules as d9-THC itself and considered a controlled substance. This means that literal tons of usable material with no resin content whatsoever are destroyed annually rather than being utilized in a commercial application simply because a part or parts of the plant they came from did not meet the d9-THC limit.
Some of the many products on the market today derived from hemp
It is well known that d9-THC content is concentrated in the glandular trichomes (resin glands) which are themselves concentrated to the fruiting tops of the plant. Once the leaves, seeds, stalks, stems, roots, etc. have been separated from the fruiting tops and/or the resin glands, then as long as these materials meet the authority having jurisdiction’s specifications for “hemp” there should be no reason why these materials could not be marketed and sold as “hemp”.
There are several reasons why a classification approach to “hemp plants” and “hemp products” makes more long-term sense than a bifurcation of the “cannabis” and “hemp” marketplaces, namely from a sustainability aspect, but also to aid in eliminating the frankly unwarranted stigma associated with the cannabis plant. #NewReeferMadness
That said, say you are a producer making shives from the stalks of cannabis plants that can be classified as “hemp” and then all of a sudden, the market opens up and tons of material from cannabis plants that cannot be classified as “hemp,” that was being sent to the landfill, become available for making shives. Would you be happy about this development? Or would you fight tooth and nail to prevent it from happening?
In this segment, we looked at the history of the term “hemp” and some of the consequences from drawing a line in the sand between “cannabis” and “hemp”. I dive deeper into this topic and provide some commonsense definitions for several traditional hemp products in Part 2 of Defining Hemp: Classifications, Policies & Markets.
By Gregory S. Kaufman, Jessica R. Rodgers No Comments
With the signing of the Cannabis Control Act (the Act) on April 21, 2021, Virginia became the first southern state to legalize adult use cannabis and just the fourth state to do so through the legislature. Legalizing adult use cannabis through the legislature, as opposed to through the ballot box, is not the typical route states have followed up to now. Eleven of the sixteen states and the District of Columbia have legalized adult use cannabis through the use of ballot measures. Virginia joins Vermont, Illinois, New York and New Mexico (which legalized after Virginia) as one of the few states that have gone the legislative route. Under Governor Northam’s administration, the path to legalization was swift, taking less than four months from introduction to passage.
Governor Northam added amendments to the already passed Senate Bill 1406 and the General Assembly voted to approve those amendments, with the Lieutenant Governor breaking the tie in the Senate’s vote. Upon signing, Governor Northam called the law a step towards “building a more equitable and just Virginia and reforming our criminal justice system to make it more fair.” This message and the opportunities to promote social equity through a legal cannabis industry have been consistent points of advocacy made by supporters as the bill advanced to becoming law.
Prior to the Governor’s amendments, the Act under consideration set July 1, 2024 as the date on which both legal possession and adult use sales would begin. The Governor decided to accelerate the date for legal possession to July 1 of this year, a decision believed to have been influenced by data showing that Black Virginians were more than three times as likely to be cited for possession, even after simple possession was decriminalized in the state a year prior. The regulated adult use market is still set to begin making sales on July 1, 2024; however, it remains possible that this date could be advanced through the legislature in the meantime. Nevertheless, Virginia is on track to becoming the first southern state with an operating regulated commercial cannabis market.
Creating an Administrative Structure for the Adult Use Program
Virginia became the first state in the South to legalize adult use cannabis
This sweeping fifty-page law creates the Cannabis Control Authority to regulate the cultivation, manufacture, wholesale and retail sale of cannabis and cannabis product. The Act further lays the groundwork for licensing market participants and regulating appropriate use of cannabis; defining local control; testing, labeling, packaging and advertising of cannabis and cannabis products; and taxation. The Act also contains changes to the criminal laws of the Commonwealth. Companion to the Act are new laws addressing the testing, labeling and packaging of smokable hemp products and manufacturing of edible cannabis products. Additionally, the Cannabis Equity Reinvestment Board was created to address the impact of economic divestment, violence and criminal justice responses to community and individual needs through scholarships and grants.
While persons 21 years or older may possess up to one ounce of cannabis and cultivate up to four plants for personal use per household beginning on July 1, 2021, there are a host of regulations to be written in order to regulate the adult use market. These regulations will be the devil in the details of how the regulated market will work. Regardless, the Cannabis Control Act does establish the framework for adult use cannabis that is unique to Virginia and designed to promote and encourage participation from people and communities disproportionately impacted by cannabis prohibition and enforcement.
The Cannabis Control Authority (CCA) will consist of a Board of Directors, the Cannabis Public Health Advisory Council, the Chief Executive Officer and employees. The Board will have five members appointed by the Governor and confirmed by the legislature, each with the possibility of serving two consecutive five-year terms. The Board is tasked with creating and enforcing regulations under which retail cannabis and cannabis products are possessed, sold, transported, distributed, and delivered. It is expected that the Board will begin discussing regulations next year and that applications for licenses for cannabis cultivation facilities, manufacturing facilities, cannabis testing facilities, wholesalers, and retail stores will begin to be accepted in 2023. Importantly, a Business Equity and Diversity Support Team, led by a Social Equity Liaison, and the Equity Reinvestment Board, led by the Director of Diversity, Equity and Inclusion, are to contribute to a plan to promote and encourage participation in the industry by people from disproportionately impacted communities.
Regulating Participation in the Market
The Act empowers the Board to establish a robust and diverse marketplace with many entry opportunities for market participants. Up to 450 cultivation licenses, 60 manufacturing licenses for the production of retail cannabis products, 25 wholesaler licenses and 400 licenses for retail stores can be granted. These numbers do not include the four permits granted to pharmaceutical processors (entities that cultivate and dispense medical cannabis) under the Commonwealth’s medical program.
Virginia Governor Ralph Northam Image: Craig, Flickr
In addition to the sheer number of licenses that can be granted, the Act devises a unique approach to addressing concerns of a concentration of licenses in too few hands and a market dominated by large multi-state operators. At the same time, it sets up a mechanism to capitalize two cannabis equity funds intended to benefit persons, families and communities historically and disproportionately targeted and affected by drug enforcement through grants, scholarships and loans. Over-concentration and market dominance concerns are addressed by limiting a person to holding an equity interest in no more than one cultivation, manufacturing, wholesaler, retail or testing facility license. This eliminates the ability of companies to be vertically integrated from cultivation through retail sales operations. However, there are two exceptions to the impediment to vertical integration. First, the Board is authorized to develop regulations that permit small businesses to be vertically integrated and ensure that all licensees have an equal and meaningful opportunity to participate in the market. These regulations will be closely scrutinized by those looking to enter Virginia’s regulated market once they are proposed. Qualifying small businesses could benefit substantially from the economic advantages commensurate with being vertically integrated, assuming they have the access to the capital needed to achieve integration and operate successfully. The second exception allows permitted pharmaceutical processors and registered industrial hemp processors to hold multiple licenses if they pay $1 million to the Board (to be allocated to job training, the equity loan fund or equity reinvestment fund) and submit a diversity, equity and inclusion plan for approval and implementation. Consequently, Virginia is attempting to fund, in part, its ambitious social equity programs by monetizing the opportunity for these processors to participate vertically in the adult use market.
Those devilish details of how this market will function, and how onerous compliance obligations will be, will emanate from those yet to be proposed regulations covering many areas and subject matters including:
Outdoor cultivation by cultivation facilities;
Security requirements;
Sanitary standards;
A testing program;
An application process;
Packaging and labeling requirements;
Maximum THC level for retail products (not to exceed 5 mg per serving or 50 mg per package for edible products);
Record retention requirements;
Criteria for evaluating social equity license applications based on certain ownership standards;
Licensing preferences for qualified social equity applicants;
Low interest loan program standards;
Personal cultivation guidelines; and
Outdoor advertising restrictions.
Needless to say, the CCA Board has a lot work ahead in order to issue reasonable regulations that will carry out the dictates in the Act and encourage the development of a well-functioning marketplace delivering meaningful social equity opportunities.
Much work needs to be done before July 1, 2024 to prepare for its debutThe application process for the five categories of licenses will be developed by the Board, along with application fee and annual license fee amounts. It is not clear how substantial these fees will be and what effect they will have on the ability of less-well-capitalized companies and individuals to compete in the market. The Act dictates that licenses are deemed nontransferable from person to person or location to location. However, it is not entirely clear that changes in ownership will be prohibited. The Act contemplates that changes in ownership will be permitted, at least as to retail store licensees, through a reapplication process. Perhaps the forthcoming regulations will add clarity to the transferability of licenses and address the use of management services agreements as a potential workaround to the limitations in license ownership.
Certain requirements particular to certain license-types are worthy of highlighting. For example, there are two classes of cultivation licenses. Class A cultivation licenses authorize cultivation of a certain number of plants within a certain number of square feet to be determined by the Board. Interestingly, Class B licenses are for cultivation of low total THC (no more than 1%) cannabis. Several requirements specific to retail stores are noteworthy. Stores cannot exceed 1,500 square feet, or make sales through drive-through windows, internet-based sales platforms or delivery services. Prohibitive local ordinances are not allowed; however, localities can petition for a referendum on the question of whether retail stores should be prohibited in their locality. Retail stores are allowed to sell immature plants and seek to support the home growers, an allowance that is fairly unique among the existing legal adult-use states.
Taxing Cannabis Sales
Given the perception that regulated cannabis markets add to state coffers, it is little surprise that Virginia’s retail market will be subject to significant taxes. The taxing system is straightforward and not complicated by a taxing regime related to product weight or THC content, for example. There is a 21% tax on retail sales by stores, in addition to the current sales tax rates. In addition, localities may, by ordinance, impose a 3% tax on retail sales. These taxes could result in a retail tax of approximately 30%.
Changes to Criminal Laws
Changes to the criminality of cannabis will have long lasting effects for many Virginians. These changes include:
Fines of no more than $25 and participation in substance abuse or education programs for illegal purchases by juveniles or persons 18 years or older;
Prohibition of warrantless searches based solely on the odor of cannabis;
Automatic expungement of records for certain former cannabis offenses;
Prohibition of “gifting” cannabis in exchange for nominal purchases of some other product;
Prohibition of consuming cannabis or cannabis products in public; and
Prohibition of consumption by drivers or passengers in a motor vehicle being driven, with consumption being presumed if cannabis in the passenger compartment is not in the original sealed manufacturer’s container.
These changes, and others, represent a balancing of public safety with lessons learned from the effects of the war on drugs.
Potpourri
The Act contains myriad other noteworthy provisions. For example, the Board must develop, implement and maintain a seed-to-sale tracking system for the industry. Plants being grown at home must be tagged with the grower’s name and driver’s license or state ID number. Licenses may be stripped from businesses that do not remain neutral while workers attempt to unionize. However, this provision will not become effective unless approved again by the legislature next year. Banks and credit unions are protected under state law for providing financial services to licensed businesses or for investing any income derived from the providing of such services. This provision is intended to address the lack of access to banking for cannabis businesses due to the federal illegality of cannabis by removing any perceived state law barriers for banks and credit unions to do business with licensed cannabis companies.
The adult use cannabis industry is coming to Virginia. Much work needs to be done before July 1, 2024 to prepare for its debut. However, the criminal justice reforms and commitment to repairing harms related to past prohibition of cannabis are soon to be a present-day reality. Virginia is the first Southern state to take the path towards legal adult use cannabis. It is unlikely to be the last.
Commercial real estate took a dive last year as companies began to work from home, but changing regulatory environments have opened doors to a new industry in need of property: cannabis. Growing rapidly at both the medical and adult use levels, cannabis businesses have been eager to move into vacant buildings, quickly buying up space as more states adjust their laws regarding cannabis.
Cannabis businesses cannot go at it blindly, however. Legal cannabis firms of all sizes – from the smallest startup to the biggest enterprise – will face regulatory challenges, traceability requirements, process control standards and, ultimately, the right technology to keep them moving forward in this promising industry.
Use data to keep track of plants, patients and regulations
As a highly regulated industry, cannabis companies could be investigated at any time. Regulatory authorities may, at the very least, request proof that they are compliant with state restrictions. Cannabis enterprises will only be able to quickly and easily provide that proof if they have immediate access to accurate historical data. With that information, they can generate the necessary reports at a moment’s notice and maintain a reliable audit trail.
Cultivation is where the tracking process begins.
Historical data is also useful for both growers looking to evaluate why certain plants are more successful than others and for sellers looking to improve their customer experience. By tracking everything from mother plants to clones, growers can build a strong genetics profile and gain a powerful competitive edge. Historical data also aids sellers, who can use it to enhance their digital storefronts and keep track of customer information, shopping history and other details that could improve the e-commerce experience.
In addition to customer details, sellers must also keep track of patient information when selling in a medical-only environment. Prescriptions need to be carefully managed to ensure that patients only receive products that they have been approved to purchase and use.
Utilize process control to foster scalable and repeatable processes
Process control is another vital component that every cannabis grower, manufacturer, processor and distributor must possess. They need scalable and repeatable processes to prevent steps from being bypassed, ensuring that every finished product matches the same high-quality standards. If there are no stopgaps in place, steps could be missed if employees are rushing to meet a deadline or simply think that a particular test or check isn’t needed. Those kinds of mistakes can be hugely detrimental to any cannabis company and may waste product, diminish profits and turn off customers.
A plant tagged with a barcode and date for tracking
Similarly, visibility and control over inventory is a top priority for any business, but it reigns supreme in the cannabis space. Managers should always, at all times, know where the product is as it moves throughout the warehouse, or risk costs and waste. By directly tying scanners and barcodes to the right technology, organizations can ensure that all product is accounted for and easily located using real-time data.
Build a foundation for scalability
Cannabis businesses don’t have the time to manually keep track of these aspects, and it wouldn’t even be possible as they grow and expand their operations. As they evolve, so too will the list of software requirements that are needed to operate smoothly, reliably and efficiently.
Cannabis processors have traditionally invested in seed-to-sale technology, relying on barcodes to track products throughout their lifecycle. While it is critical for cannabis enterprises to keep a strong level of control over lot tracking, this type of software is very limited. Cannabis firms would therefore be better served by an ERP solution with a single data source that provides centralized, real-time access to vital business information.
ERP technology can also help cannabis businesses better manage their production schedule, material requirements planning, accounting, purchasing, inventory management and document generation. The key, however, is to choose the right technology, avoiding ERP solutions that rely on customizations and bolt-ons, which will impede an organization’s ability to scale. Cannabis businesses should instead use technology that makes all of its features, enhancements and extensibility available to all customers, ensuring that every user has access to the same benefits.
Late last week, the American Association for Laboratory Accreditation (A2LA) granted ISO/IEC 17065 accreditation to Americans for Safe Access (ASA). This is the first accreditation ever issued to a product certification body in the cannabis market.
ASA is a member-based organization founded in 2002 that seeks to ensure safe and legal access to cannabis for medical purposes and research. Back in 2016, A2LA and ASA partnered on a collaboration to develop the Patient Focused Certification (PFC) program.
What started as a supplement to ISO 17025 for cannabis testing labs to demonstrate a dedication to patient safety, has grown into a more comprehensive certification and consulting program that offers training, business services, company certifications. With the ISO 17065 accreditation, ASA can now deliver PFC certifications that confidently identify reliable and high-quality medical cannabis products, business and services.
Jonathan Fuhrman, program manager at A2LA, says this is a big milestone for ASA’s platform. “ISO/IEC 17065 and product certification can play a decisive role in the evolution of cannabis as medicine,” says Fuhrman. “With its high standards for competence and impartiality, adopting ISO/IEC 17065 represents a major win for healthcare providers and patients.”
Heather Despres, the director of ASA’s Patient Focused Certification program, says she is thrilled to be the first cannabis compliance organization to attain the accreditation. “The PFC program was developed by ASA in an effort to continue our commitment to protect patients, many of whom are medically fragile, and consumers who may be seeking medicine outside of conventional medicinal channels,” says Despres. “There is no other process that can demonstrate that continued commitment more than achieving ISO 17065 accreditation.”
This follows the launch of their first CBD-infused beverage line sold in the United States, Quatreau. In the initial phase of the agreement, Southern Glazer’s will distribute the beverage line in seven states, with plans to expand that footprint considerably in the coming months.
Being a national distributor with a strong presence throughout the country, Southern Glazer’s will be moving Canopy’s beverage line in conventional retail stores. The press release seems to credit Canopy’s partnership with Constellation Brands as the catalyst for the new distribution deal. “The agreement also showcases the benefits of the company’s strategic relationship with Constellation Brands, the global beverage leader,” reads the release.
Back in 2018, Constellation Brands made a $4 billion bet on Canopy, but immediate profitability did not come to fruition. This new deal with Southern Glazer’s, as well as the launch of the Quatreau beverage line, seems to prove Constellation’s bet is beginning to pay off, or at least showing signs of a long term play for market share.
Natural cannabinoid distillates and isolates are hydrophobic oils and solids, meaning that they do not mix well with water and are poorly absorbed in the human body after consumption. By formulating these ingredients using a patented delivery system technology, trademarked VESIsorb®, Geocann has overcome common obstacles associated with fat-soluble active ingredients, including poor stability, bioavailability, absorption, and solubility. In addition, Geocann has peer-reviewed, published evidence of the dramatic improvements in Cmax, AUC, and Tmax (“time to peak absorption” directly related to “fast-acting” benefits).
Geocann is a cannabis formulation company with its headquarters in Fort Collins, Colorado, and additional offices in Chicago, Illinois and Zurich, Switzerland. The company is led by an impressive leadership team of scientists, pharmacists, researchers and natural product industry leaders. Geocann’s technology platform has been successfully applied to a wide range of cannabis product applications, including soft gel and hard-shell capsules, functional foods (e.g. gummies) and beverages, powder systems, tinctures, sublingual sprays and topically applied formulations. Brand partners in the U.S. utilizing Geocann’s technology for hemp applications include Nestlé Health Science, Cannaray and Onnit, and brand partners for medical and adult-use cannabis applications include Curaleaf, Sunderstorm and CannaCraft, among others.
We spoke with Jesse Lopez, CEO and Founder of Geocann, about their product formulation technology in cannabis and how they work with brand partners in the U.S and internationally. Lopez started Geocann in 2018 alongside the success he’s experienced at SourceOne Global Partners (founded in 2003 by Lopez), a leading formulation company in the nutraceuticals space with a reputation for pioneering innovative products that combine science-backed ingredients with patented drug delivery system technologies to address the most pressing consumer health concerns, such as heart health, cognitive function, inflammatory response, metabolic syndrome and type II diabetes, among others.
Aaron Green: Jesse, first off, how did you get involved in the cannabis industry?
Jesse Lopez: Our focus at SourceOne Global Partners has been on natural products for nearly two decades. Some of the folks involved with our natural products business decided that they would get involved in the cannabis business and they asked for my support at the Advisory Board level. I agreed to serve and figured I better learn about the cannabis industry! We realized that there was a tremendous opportunity for utilizing our drug delivery system technology to enhance the value of these cannabis-based products. Due to the regulatory environment, strategic legal counsel and new investments necessary to take an immediate leadership position in the cannabis industry we launched Geocann in 2018 with an office in a fully legal state at the time, Colorado.
Green: How do you select the natural products you work with at SourceOne?
Jesse Lopez, CEO and Founder of Geocann
Lopez: We really focus on science-backed natural product ingredients that may require high doses to reach therapeutic blood levels. By combining these science-backed ingredients with patented technologies – which we own the global rights to – these products offer desirable differentiation for leading brands, such as dramatically improved absorption and bioavailability, patent protection and trademarked “intel inside” branding.
Green: What are some of the other natural products you have experience with?
Lopez: We work with a range of some of the most popular nutraceuticals such as coenzyme Q10 and omega-3 fish oil to the more innovative natural products like resveratrol. We also work with vitamin D, and other immunity-based ingredients that can be enhanced using our delivery system technology to deliver greater benefits to the people that are taking those products.
Green: What is the technology and how does it work?
Lopez: I think it’s important to recognize our technology partner, Vesifact, in Zurich, Switzerland, who is the inventor of the VESIsorb® technology platform and serves as the scientific research, technical support, production, and product development arm of SourceOne and Geocann. We are very proud of this symbiotic relationship where our role at Geocann and SourceOne is to provide the commercial development, sales, marketing and strategic distribution infrastructure. We promote our partnership openly on our website and in our marketing materials because of their unrivaled leadership position in the global marketplace.
They have consistently been recognized as a top 10 global organization for health-related nanotechnology patent activity, ahead of many of the most well-known pharmaceutical companies in the world. It is an intellectual property portfolio that has been used to provide solutions to the most difficult product formulation challenges over the years in pharmaceuticals, medical devices, nutraceuticals, cosmetics, and now cannabis applications. Together, our focus has been on delivering novel solutions in these diverse fields of use and product applications based upon VESIsorb® formulation technology.
Each active compound identified with its own set of formulation, absorption and bioavailability challenges requires a customized solution that allows the full potential health benefits to be realized from success in the lab to commercial scale up. This is the process and we have successfully delivered unmatched solutions for close to twenty years from coenzyme Q10 to now both psychoactive and non-psychoactive cannabinoid product formulations in a wide range of product applications.
We saw the exploding interest in CBD with our nutraceutical partners and demanding consumers worldwide but chose to start Geocann to keep the markets served separate. We were confident that the VESIsorb® technology would provide much needed solutions for CBD as a wellness product, but also adult-use and medical cannabis products regarding “fast acting” and “product stability” needs.
Green: What’s the problem in cannabinoid bioavailability that Geocann’s technology helps to solve?
Lopez: It is well-recognized in the scientific literature that CBD, THC and other cannabinoids, in general, show limited bioavailability due to their lipophilicity, poor aqueous solubility and extensive first-pass metabolism.
Our VESIsorb® technology was designed to address the poor bioavailability of drugs and natural bioactives like cannabinoids exhibiting poor water solubility but high membrane permeability (Biopharmaceutical Classification System: Class II compounds). The VESIsorb® technology is a lipid-based formulation that self-assembles on contact with an aqueous phase into a colloidal delivery system. This colloidal solubilization improves the transport of the cannabinoids through the aqueous phase of the GI-lumen to the absorptive epithelium, dramatically improving bioavailability.
VESIsorb® is typically characterized as a SEDDS (self-emulsifying drug delivery system). What’s unique about our VESIsorb® SEDDS is the long history of safe and effective use worldwide and the large number of products that, over the years, we’ve successfully developed. With decades of experience delivering novel formulation solutions, there is significant and valuable “know how” that we bring to each formulation challenge. This “know how” allows us, for example, to develop cannabinoid formulations that provide lymphatic absorption pathway advantages in addition to standard gastrointestinal absorption, therefore optimizing therapeutic blood levels for maximum benefits.
Needless to say, there are various methods that attempt to address the poor cannabinoid bioavailability. Unfortunately, too often, companies make claims that they have water soluble cannabinoids but offer little evidence to validate their claims. The popular misconception is that some degree of water solubility will consistently translate to improved bioavailability. This is clearly not accurate. We know scientifically that pharmacokinetic performance is highly variable. A review paper I read recently comparing water soluble delivery system formulation types illustrated this fact. There was greater than an eight-fold difference in bioavailability amongst the various water-soluble formulations.
Green: Can you tell me some details about your global license with Vesifact?
Lopez: Our technology exclusivity is based upon given categories. So, when we say we have global exclusivity for nutraceuticals, that can be as I’ve already mentioned, omega-3, coenzyme Q10, or resveratrol as examples, and this business is managed by SourceOne. With regards to our global exclusivity for cannabinoids and terpenes– whether we formulate these ingredients to create a functional drink, or we’re creating a gummy, or creating a softgel capsule or powder-filled hard-shell capsule, or sublingual, or topical – all of those product applications are covered by ourexclusivity for the technology and is managed by Geocann.
The beauty of our technology is that we’ve already achieved success with all of those product applications. That’s one of the big advantages of our technology versus some other approaches trying to address the challenges of cannabinoid bioavailability.
Green: What kind of validation and clinical studies have you done so far in the cannabinoid space?
Lopez: We were the first to have stability data with creating our formulation in a soft gel capsule with CBD. We recently submitted to the European market for novel food application. We invested hundreds of thousands of dollars in proprietary safety studies that are required to achieve novel food status in Europe and FDA GRAS in the U.S. We have proprietary stability data as well as proprietary toxicology data from multiple, self-funded clinical studies. Many companies that submit for the EU novel food application are only referencing the existing scientific literature about the pharmacokinetics of cannabinoids, whereas we have our own peer-reviewed, published study. In our study, we compared our VESIsorb®-CBD formulation to the industry standard MCT Oil-CBD formulation in a crossover design where we were able to demonstrate how we could dramatically improve the bioavailability of CBD.
Green: Can you talk about the benefits of your technology with regards to bioavailability and onset time?
Lopez: When you start talking about onset time we move into a broader discussion relative to cannabinoids. We’ve been very successful with marijuana, especially as it relates to THC, because of the dramatic improvement in time to Tmax, and how much faster we reach Tmax than a standard THC formula. Our formulation is generally four times faster compared to standard formulations.
When it comes to area under the curve and Cmax, we show improvements of four to six times a standard THC or CBD product. Further, when we start looking at the differences between other studies that have been published, we show an even greater improvement based upon study comparisons to what other people have done, even compared to products like GW Pharmaceuticals’ Sativex Oromucosal Spray.
Green: Can you address the SEDDS formulation and liver metabolism?
Lopez: We’ve dramatically overcome challenges with the first-pass effect. We have also formulated our products to address lymphatic absorption. So, we’re coming at it from a number of different angles.
We disagree with people who talk about water solubility as an end-all be-all solution. When you look at the range of published studies, whether it’s nanoparticles or liposomal systems or micro-emulsions, they all are water soluble systems, but yet the data shows there’s dramatic differences in the real efficacy of those approaches, and what the actual improvement in blood levels are. Ultimately, those blood levels represent the efficacious nature of the products whether we’re talking about CBD, or talking about THC.
Green: As a Colorado-based company you work with cannabis partners across the US. Can you tell me about your relationship with marijuana product formulators and brands and how you structure your licensing agreements across state boundaries?
Lopez: In a recent article about the leading fast acting gummies, the two companies they focused on were Sunderstorm with the Kanha Nano gummies and Curaleaf with their Select Fast Acting Nano gummies. Both of those companies use our VESIsorb® technology. We’re very proud of our relationship and the success they’re having as leaders in most dominant states with that particular product application.
Onset time has always been a challenge with gummies. And we’ve dramatically improved onset. Actually, we’ve shown statistically significant improvements for all measured pharmacokinetic parameters in a recent peer-reviewed published study. We demonstrated much higher total absorption in maximum plasma concentration (Cmax), total exposure [area under the curve (AUC)]) and the time to reach the peak concentration (Tmax).
We say powered by VESIsorb® technology the product is faster, stronger, longer.
Green: How does the experience differ from a standard oil- or isolate-based formulation?
Lopez: The only way that I can answer that question is we’ve had 100% success with the companies we work with in their initial trials. When someone tells me that a group of employees are going to try the product and they’re heavy users of cannabis and they are smokers, I think, “wow, you know, gummies have to be really successfully formulated for someone like that to be pleased with the high.” Then they come back and say, “that’s the best that I’ve had in four years!” and they’re totally blown away. That’s completely different than a peer reviewed published study, but for sure, that’s the kind of feedback and anecdotal evidence that we get. I think that’s why that application is growing so much faster now because we’ve overcome this onset issue.
Green: Do you give exclusive rights on a state-by-state basis?
Lopez: We’re very selective about who we work with. Exclusivity is always part of the discussion. But at the same time, it’s really more about protecting the investment in the people that we partner with and not cannibalizing a given market. So, there are some exclusive relationships in the U.S. and internationally, like Heritage Cannabis and Pathway Health Corp in Canada, but for the most part, I would say simply, we were very selective about who we do business with and open to new partnerships.
Green: What kind of support do you provide to your licensing partners?
Lopez: We provide 100% formulation and technical support. We provide the SEDDS and then they use their own legal, licensed cannabis and their own equipment. Our system requires no special equipment or investment in changes to their process. So, not only do we provide formulation expertise, but our system is really easy to use both in a lab environment as well as producing large scale commercial productions.
Green: What geographies are you in currently with the cannabinoid formulations?
Lopez: We are global in scope. We’ve been very fortunate to have success not only in the US and Canada, but Europe, Brazil and Australia as well. Our level of participation will vary whether we’re talking about medical marijuana, adult-use or hemp extract and CBD.
Green: If somebody is interested in learning more about your product or potentially becoming a license partner, how would they how would they reach out to you to set that up?
Lopez: If they went to our website, www.geocann.com, it’s pretty easy to reach us and I am grateful that so many companies are doing that.
Green: Great, thanks Jesse that concludes the interview!
When it comes to small business opportunities these days, few phrases give people the old dollar-sign-eyes more than “legal cannabis”.
From states like Michigan where it’s been approved for both medicinal and adult use, to places like South Carolina where legalization has been a popular topic for ballots and voters, cannabis is slowly turning into one of America’s biggest businesses.
You don’t need us to tell you that – Investopedia reports that (as of Nov. 2020) over 340,000 American jobs were devoted to the handling of plants at various stages along the retail cycle, and the industry was estimated at over $13 billion as of 2019.
Not bad for a plant that’s still technically illegal under federal law, huh?
If you’ve read this far, it probably means you’re hoping to be among the lucky ones who can strike it rich with their own cannabis business. A noble undertaking, but are you really prepared to make your mark? In a field as competitive – and occasionally complicated – as cannabis can be, you really need to lead with your best foot forward, and make sure you’re as well prepared for the various challenges of a fairly new industry as possible.
With that in mind, below is a list of the five things you’ll need to double-check and make sure you actually have access to before embarking on your new business venture.
The right shelving & equipment
You see this a lot with smaller businesses as well as, er, ‘independent growers’. A lot of people assume that they can just buy some greenhouse shelves, line the walls of their business with it, and call it a day, right?
Offering rare or unique cannabis strains is a great way to differentiate
This approach leads to problems more often than not. Even above and beyond the inherent concerns of helping your plants grow safely (and productively!), the sort of equipment you use should reflect the sort of business you’re trying to run. A cannabis retail outlet, for example, is going to need different sorts of shelves and tables than a dispensary or growing facility, as the work being done is completely different.
It will take a little research, but it helps that a lot of businesses these days are starting to offer shelving specifically designed for various cannabis operations. Check to see if any of the big warehouse suppliers near you have gotten into the cannabis game yet – Shelving Inc, Metro, and Rack & Shelf are a few of the bigger shelving names with cannabis offerings as of this writing.
Strong branding
Long gone are the days when all you needed to be successful in cannabis was a booth at the shady flea market, a pun name and a big sign that said “Head Shop” to throw off the authorities.
Far too many cannabis businesses launch themselves headlong into a business plan without stopping to think of a good name, or just settling for the first one they think of. With as crowded as the playing field is quickly becoming, it might honestly be worth it to pay someone to help you come up with a decent logo and branding – it’ll go a long way towards helping you stand out against everyone else using a green font. Places online like HIGHOPES specifically offer these services for cannabis businesses, so you know they’ll be able to figure out what you’re about more quickly.
An understanding of your consumer base
The exact sort of work your cannabis business performs is going to affect what your potential customer base can be – and vice versa.
Brands are embracing contemporary design more and more
Early on in the planning stages, make sure to figure out exactly who you’re going to sell your products to, as this will inform nearly every other decision your business makes. Do you want to sell directly to the customer, or to work as a distributor for CBD/cannabis retail outlets? Are you prepared to manage and run your own storefront, or are you just going to rent warehousing space to sell your plants to other retailers? If so, do you know who the businesses are in your area that you could work with? Or, if you are planning on entering the retail space, do you know how many other cannabis businesses could be operating in your desired geographical area? Finding an audience may be the hardest part of opening any business, but it’s important work.
Banking that understands your industry
Maybe the biggest drawback to being involved in an industry as comparatively new as cannabis, is that a lot of the old methods of doing business aren’t quite available to you. Many financial institutions of various sizes are limited in the ways they can help finance cannabis businesses, from not understanding the regulations and needs of your industry, all the way to being unable to assist cannabis businesses with banking in the first place.
Finding the right banking services can be challenging
It might be advantageous to look into banks, credit unions or financing companies in your area that specifically offer banking services (like business accounts and the like). A few examples include Aery Group from New Mexico, or Seed to Sale in Michigan. (It’s important to note that many of these companies, such as Aery Group, can only service the state they’re located in due to different state-by-state regulations – check ahead to make sure you find a place that can help you!)
Knowledge of the needed licensing and regulatory requirements
Getting a license to open any business is a tricky prospect on a good day, but for an industry as wide-ranging and varied as cannabis, getting licensed can require a lot of homework.
Even if you’re lucky enough to be setting up shop in a state that allows for the sale of cannabis, the licensing process can vary widely from state-to-state. In New Mexico, for example, it can take months to acquire a license simply due to the amount of paperwork, research and submissions required to cement your business. Before going too far down the rabbit hole of opening your business, make sure to take the time you need to completely research and understand the various local and state regulations you’ll need to adhere to for your business to get off the ground.
Obviously, there’s going to be a lot of other hurdles and requirements that come with starting a business – but by remembering these five things, you’ll be off to a much better start than many others.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
Basically, what’s happening is growers are contacting labs and asking, “I get 30% THC at this lab; what can you do?” When they see our COA reporting their flower tested lower than anticipated, they will go to another lab to get higher test results. Unfortunately, there are all too many labs that are willing to comply.
Labs are required to keep a back stock of material. So, when test results come back abnormally high from Lab A, then Labs B, C and D are commissioned to retest the material to compare data. If Lab A reports 40% THC, but the other labs all report 18%, then it’s easy to see Lab A has made an error.
