Tag Archives: legalize

The Best Way to Remediate Moldy Cannabis is No Remediation at All

By Ingo Mueller
3 Comments

Consumers are largely unaware that most commercial cannabis grown today undergoes some form of decontamination to treat the industry’s growing problem of mold, yeast and other microbial pathogens. As more cannabis brands fail regulatory testing for contaminants, businesses are increasingly turning to radiation, ozone gas, hydrogen peroxide or other damaging remediation methods to ensure compliance and avoid product recalls. It has made cannabis cultivation and extraction more challenging and more expensive than ever, not to mention inflaming the industry’s ongoing supply problem.

The problem is only going to get worse as states like Nevada and California are beginning to implement more regulations including even tougher microbial contamination limits. The technological and economic burdens are becoming too much for some cultivators, driving some of them out of business. It’s also putting an even greater strain on them to meet product demand.

It’s critical that the industry establishes new product standards to reassure consumers that the cannabis products they buy are safe. But it is even more critical that the industry look beyond traditional agricultural remediation methods to solve the microbial problems.

Compounding Risks

Mold and other microbial pathogens are found everywhere in the environment, including the air, food and water that people consume. While there is no consensus yet on the health consequences of consuming these contaminants through cannabis, risks are certainly emerging. According to a 2015 study by the Cannabis Safety Institutei, molds are generally harmless in the environment, but some may present a health threat when inhaled, particularly to immunocompromised individuals. Mycotoxins resulting from molds such as Aspergillus can cause illnesses such as allergic bronchopulmonary aspergillosis. Even when killed with treatment, the dead pathogens could trigger allergies or asthma.

Photo credit: Steep Hill- a petri dish of mold growth from tested cannabis

There is an abundance of pathogens that can affect cannabis cultivation, but the most common types are Botrytis (bud rot, sometimes called gray mold) and Powdery Mildew. They are also among the most devastating blights to cannabis crops. Numerous chemical controls are available to help prevent or stem an outbreak, ranging from fungicides and horticultural oils to bicarbonates and biological controls. While these controls may save an otherwise doomed crop, they introduce their own potential health risks through the overexposure and consumption of chemical residues.

The issue is further compounded by the fact that the states in which cannabis is legal can’t agree on which microbial pathogens to test for, nor how to test. Colorado, for instance, requires only three pathogen tests (for salmonella, E. coli, and mycotoxins from mold), while Massachusetts has exceedingly strict testing regulations for clean products. Massachusetts-based testing lab, ProVerde Laboratories, reports that approximately 30% of the cannabis flowers it tests have some kind of mold or yeast contamination.

If a cannabis product fails required microbial testing and can’t be remedied in a compliant way, the grower will inevitably experience a severe – and potentially crippling – financial hit to a lost crop. Willow Industries, a microbial remediation company, says that cannabis microbial contamination is projected to be a $3 billion problem by 2020ii.

Remediation Falls Short
With the financial stakes so high, the cannabis industry has taken cues from the food industry and adopted a variety of ways to remediate cannabis harvests contaminated with pathogens. Ketch DeGabrielle of Qloris Consulting spent two years studying cannabis microbial remediation methods and summarized their pros and consiii.

He found that some common sterilization approaches like autoclaves, steam and dry heat are impractical for cannabis due the decarboxylation and harsh damage they inflict on the product. Some growers spray or immerse cannabis flowers in hydrogen peroxide, but the resulting moisture can actually cause more spores to germinate, while the chemical reduces the terpene content in the flowers.

Powdery mildew starts with white/grey spots seen on the upper leaves surface

The more favored, technologically advanced remediation approaches include ozone or similar gas treatment, which is relatively inexpensive and treats the entire plant. However, it’s difficult to gas products on a large scale, and gas results in terpene loss. Microwaves can kill pathogens effectively through cellular rupture, but can burn the product. Ionizing radiation kills microbial life by destroying their DNA, but the process can create carcinogenic chemical compounds and harmful free radicals. Radio frequency (which DeGabrielle considers the best method) effectively kills yeast and mold by oscillating the water in them, but it can result in moisture and terpene loss.

The bottom line: no remediation method is perfect. Prevention of microbial contamination is a better approach. But all three conventional approaches to cannabis cultivation – outdoors, greenhouses and indoor grow operations – make it extremely difficult to control contamination. Mold spores can easily gain a foothold both indoors and out through air, water, food and human contact, quickly spreading into an epidemic.

The industry needs to establish new quality standards for product purity and employ new growing practices to meet them. Advanced technologies can help create near perfect growing ecosystems and microclimates for growing cannabis free of mold contamination. Internet of Things sensors combined with AI-driven robotics and automation can dramatically reduce human intervention in the growing process, along with human-induced contamination. Natural sunlight supplemented with new lighting technologies that provide near full-light and UV spectrum can stimulate robust growth more resistant to disease. Computational fluid dynamic models can help growers achieve optimal temperature, humidity, velocity, filtration and sanitation of air flow. And tissue culture micropropagation of plant stock can eliminate virus and pathogen threats, to name just a few of the latest innovations.

Growing legal cannabis today is a risky business that can cost growers millions of dollars if pathogens contaminate a crop. Remediation methods to remove microbial contamination may work to varying degrees, but they introduce another set of problems that can impact consumer health and comprise product quality.


References

i. Holmes M, Vyas JM, Steinbach W, McPartland J. 2015. Microbiological Safety Testing of Cannabis. Cannabis Safety Institute. http://cannabissafetyinstitute.org/wp-content/uploads/2015/06/Microbiological-Safety-Testing-of-Cannabis.pdf

ii. Jill Ellsworth, June 2019, Eliminating Microbials in Marijuana, Willow Industries, https://willowindustries.com/eliminating-microbials-in-marijuana/#

iii. Ketch DeGabrielle, April 2018, Largest U.S. Cannabis Farm Shares Two Years of Mold Remediation Research, Analytical Cannabis, https://www.analyticalcannabis.com/articles/largest-us-cannabis-farm-shares-two-years-of-mold-remediation-research-299842

 

Steven Burton

A Regulatory Tsunami is Washing Over the Canadian Cannabis Industry

By Steven Burton
No Comments
Steven Burton

On August 29, 2019, Health Canada finally published a guidance document on the official interpretation of Part 5 of the Cannabis Regulations concerning “Good Production Practices” that comes into force just seven weeks later on October 17, 2019. For those watching with the experience of the food industry, it is safe to say that few license holders fully appreciate the magnitude of the new requirements and fewer yet are prepared for what will be required in less than two weeks.

An Uncertain Road to Cannabis Compliance

Since Canada legalized recreational cannabis in October 2018, there has been considerable uncertainty about the road to compliance in this totally new legal market. Health Canada faced the daunting challenge of defining the requirements for a whole new industry, and so they were understandably silent on the issue of Part 5 until this guide was published in August.

GMPMany larger companies eager to get their foot in the door of the multi-billion dollar industry tried to be proactive in anticipating impending government regulations by seeking Good Manufacturing Practices (GMP) certifications. This would likely have been fine under the previous regulations, which were myopically focused on ensuring that product wasn’t diverted from or to the black market. With the legalization of edibles only one year away, however, it was obvious to those in the food industry that GMP was just not going to be enough. Gentle prodding at various speaking engagements on our part wasn’t enough to convince these companies to seek higher levels of certification or at least to proactively develop the organizational culture required to support a higher-level program.

The Inevitable Necessity of Food Safety

It was clear to us that since edibles are essentially a food product, safety necessarily had to become a primary focus. This reality has, in fact, materialized in section 5 of the new guide, which outlines prescriptive requirements that are very well developed and require that companies develop a complete set of Standard Operating Procedures (SOPs) for sanitation, employee hygiene, testing, inventory, pest control and more. Furthermore, cannabis companies must be able to produce documentation that proves they are actually following these procedures.

There are many, many other requirements that also apply, but the really interesting ones are those related to hazard analysis (5.2.13) and preventive control plans (5.2.14): manufacturers who produce extracts or edibles must undertake hazard analyses on each input, processing step and traffic flow. The language will be familiar to those who have been exposed to Hazard Analysis and Critical Control Point (HACCP) methodology. HACCP is the standard in the food industry and goes far beyond simple GMP.

Very much like HACCP, license holders will be required to analyze each biological, chemical and physical hazard, determine controls, identify critical control point, along will all the validation, reassessment, verification and deviation protocols required. Interestingly, the fraud and bioterrorism hazard types that have recently been introduced for the food industry have been omitted, presumably an oversight that will be rectified in future versions.

How to Catch Up Fast with Tech

Satisfying these regulations using traditional manual methods takes months or even years in some cases. Today in Canada, license holders have only weeks to get their facilities to compliance, and the government is quick to crack down on any mistakes. The only way to possibly meet this deadline is to start yesterday and use the best tools you can find to expedite the process.

HACCPThose who have been busy implementing GMP programs are going to have to look far beyond their current objectives. Those just starting out should build with these requirements front of mind, both to satisfy inspectors and auditors and also to avoid the pain of the organizational change required to move to a higher level of quality and safety.

Ultimately, these changes will be of benefit to society and provide a competitive advantage to those who can move the fastest, especially when major retail chains become the dominant wholesale market. My advice is to start working on your HACCP-based compliance program immediately and, if you’re in Canada, seek a high-level certification like SQF as soon as possible.

It’s fair to say that the food industry’s recent experiences with more stringent regulations clearly foreshadow what will be required for the cannabis industry. Right now – when the margin of error is razor thin – is the time for companies to make the decisive move and focus on their success – and survival.

Navigating Cannabis Staffing and Hiring Challenges

By Michael Coleman
No Comments

With more cannabis staffing and recruiting challenges than ever before, building a healthy pipeline of top candidates can be an uphill battle. From a lack of qualified candidates and working capital to the haze of lingering stigma and industry volatility, cannabis hiring and retention challenges are more apparent than ever.

Understanding the pain points of cannabis staffing and how to flip them in your favor is critical for attracting the talent you need to grow your business.

Emerging Candidate Concerns

Low unemployment coupled with high demand for qualified talent has led to fierce competition among cannabis hiring managers and HR professionals. This means finding candidates with the right skills and industry experience can be exceptionally difficult.

Dispensary and budtender jobs are some of the most popular entry-level cannabis employment opportunities. But since these are customer-facing roles, the requirements to work in a dispensary span a range of skillsets.

Not only do candidates need excellent interpersonal skills, they should also have a deep understanding of the differences and synergies in strains, terpene profiles and cannabinoid contents. The starting hourly pay for these retail dispensary jobs is only about $12-16 per hour. Finding candidates with relevant dispensary experience at such a low rate is not an easy feat.

Source: Vangst

Then there are the extractors and directors of extraction. While these positions are higher-paying than dispensary jobs, they are more dangerous and require a more specific skillset. Engaging qualified candidates for this high-risk position can take a lot of time and effort. In addition, employers also have to assume liabilities and higher compensation demands.

Source: Vangst

Other cannabis employment types that staffing departments and agencies have to hire are highly specialized.

Source: Vangst
Source: Vangst

Not only do you need talented and knowledgeable salespeople, marketers and accountants, there are also laboratory workers, trimmers, cultivation laborers and supervisors, master growers, dispensary managers and delivery drivers to account for.

Lack of Working Capital

With market demand continuing to rise, having the manpower in place is vital to remain competitive. But hiring costs money. Recruiting, advertising and interviewing requires adequate cannabis funding and/or working capital. Unfortunately, obtaining and securing capital to grow and hire is difficult in the industry today.

Making the wrong hiring decision can be costly. If you break any laws during the recruiting process, you can get hit with a hefty lawsuit. The majority of industry players today are startups with limited financial resources. A lawsuit can mean shutting down shop and going out of business.

The Volatile Nature of the Industry

The advancement and adoption of cannabis legislation are rapidly underway for medical use, recreational use and everything in between.

With shifting public sentiments, state-specific cannabis laws and licensing requirements, the industry is in a constant state of change. Even the requirements to work in the cannabis industry vary from state to state.

The ever-rising tide of volatility makes it difficult for companies to find enough stability to make responsible hiring decisions. One regulatory revision can require a company to pivot its branding, product line and entire marketing strategy from top to bottom. A shift in strategy can mean a shift in employee requirements and skillsets. This instability tends to be unappealing to candidates who are accustomed to a well-established workplace structure and culture.

With so much volatility and uncertainty, prioritizing employee relationship management seems like a wise decision. But in-house cannabis human resources is just not in the cards in many cases. Instead, cannabis staffing, recruiting and HR tend to be outsourced along with accounting and compliance.

Lack of Suitable Cannabis Recruiting Platforms

While perceptions are changing, misconceptions about the industry are still pervasive.

Lingering market stigma presents a grave challenge for cannabis staffing and hiring. In fact, many mainstream recruiting platforms are unwilling to partner with cannabis companies. Fortunately, there are some relatively new cannabis HR agencies and platforms to help solve some of the challenges of hiring in cannabis. Vangst GIGS, for example, is the first and only fully-compliant cannabis staffing platform. The CBD staffing agency has been up and running for just a few years now.

Future of Cannabis Staffing and Hiring Demands

While hemp-derived CBD has been legal since the signing of the 2018 U.S. Farm Bill, marijuana-derived CBD is still illegal. But this may change sooner rather than later.

There is growing bipartisan support for the legalization and regulation of cannabis. Beyond improving quality assurance and resolving the disconnect between state and federal laws, federal cannabis legalization will have a profound impact on the U.S. economy.

In fact, New Frontier Data projects federal legalization will create $128.8 billion in additional tax revenue and 1.63 million legal cannabis jobs in the U.S. by 2025.

Cannabis payroll deductions could also increase to $9.5 billion by 2025 because more legal entities, customers and employees would be participating in the market.

With federal legislation likely coming in the near future, knowing how to navigate and scale cannabis human resources, including hemp staffing, are more important than ever. You need the right people and processes to take advantage of the market opportunities legalization would create.

Companies that adapt to industry changes will be better at recruiting top talent and mitigating future staffing shortages. Forward-looking companies and fund managers are already obtaining cannabis business loans and ramping up HR preparations and organizational structuring to get a jumpstart on the pace of change.

Soapbox

Searching for the Good Stuff

By Cindy Rice
1 Comment

Someone approached me the other day, wanting to know what was the real story about hemp and CBD.

He said he had “a guy” who gave him a CBD salve as part of a study, supposedly “the good stuff,” to help his knee. He couldn’t understand why he was the only one out of 20 people in the group that felt no relief. He happened to have this CBD salve with him, along with a second brand that he hadn’t yet tried. The “good stuff” had slick, colorful packaging, a beautiful logo and powerful marketing messages about the phytocannabinoids and essential oils in the jar. The other CBD product was in a dull grey tin, an ugly duckling, and not nearly so impressive on the outside- I’ll call it “Homer’s Brew.” My friend dismissed Homer’s Brew outright, as not even worth trying. I told him that not all CBD products are created equal, that you can’t always believe the claims on the package, including the cannabinoid potency displayed on the label.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

I told him to search for the Certificate of Analysis (COA) for each of the two products, specifically, lab test results validating the CBD dosage per serving, and also the breakdown of pesticides, heavy metals and microbials. He had to do a little digging and emailing, as it wasn’t readily available for either company, but the next day, results were in. The “good stuff” with the slick packaging and bold claims had mere trace amounts of CBD, with some hemp and essential oils- no tests for pesticides or contaminants of any kind. Hmmm, no wonder he was disappointed. Homer’s Brew’s COA came in with flying colors – a reputable lab had confirmed safe levels of pesticides, pathogens and heavy metals, and the CBD level was substantial, with a detailed cannabinoid breakdown in the lab report.

In spite of the varying legality of hemp-derived CBD products from one state to the next, consumers are gobbling up costly CBD salves, tinctures and edibles in markets, gyms and online. Like moths to a flame, they are pulled in by the CBD name and lofty promises, not always understanding what they are getting for their money. They trust that these products are safe, licensed, inspected and regulated by some agency, otherwise, “they wouldn’t be on the shelves, would they?”

FDAlogoIn spite of the 2018 Farm Bill, FDA still has not recognized the legality of products containing hemp-derived CBD, but some states have gone ahead and given them a green light anyway- check with your own jurisdiction to be sure. In the meantime, hemp-derived CBD products are slipping through the regulatory cracks, depending on the state. It is confusing, for sure, and buyer beware.

Separate yourself from the pack of snake-oil salesmen. Test your products for safety and accurate cannabinoid potency, and make a Certificate of Analysis readily available to your customers. Boldly portray your transparency and belief in the quality of your products through this COA.

Providing this information to consumers is the best path to success- safe, satisfied customers who will refer to their friends and family, and most likely come back for more of your “good stuff.”

Massachusetts Implements Responsible Vendor Training Program

By Aaron G. Biros
No Comments

According to a press release published earlier this week, the Massachusetts Cannabis Control Commission approved Cannabis Trainers as one of the state’s first vendor training providers. The training program, Sell-SMaRT™ is the world’s first state-approved cannabis vendor training.

Regulations in Massachusetts require all licensed growers, managers and employees that handle cannabis to take a responsible vendor training class through a certified provider by January 1, 2020.

The Sell-SMaRT™ program was originally developed for licensees handling cannabis in Colorado. In 2015, Colorado regulators granted the program the first ever certification for its Responsible Vendor Program in cannabis. Since then, almost 4,000 people have taken the Cannabis Trainers class, which has been customized for six states, including Massachusetts.

Maureen McNamara, founder of Cannabis Trainers

Maureen McNamara, founder of Cannabis Trainers, built on two decades of experience in alcohol vendor training before she started the training program for cannabis. “Massachusetts is really setting a new standard with its training requirements,” says McNamara. “We’ve worked hard to customize the Sell-SMaRT™ program for the state’s needs, and we appreciate the Cannabis Control Commission’s recognition of that. We’re excited to help inspire a cannabis workforce in the state that is responsible, compliant and committed to excellence.”

Meg Sanders, CEO of Canna Provisions, a Massachusetts cannabis company, says the program helps her employees learn the rules thoroughly. “Cannabis Trainers trained all of my Colorado employees, and my entire team in Massachusetts as well,” says Sanders. “I know every time Cannabis Trainers meets with my staff, we walk away smarter and better prepared to help our customers.”

UKflag

CBD In The UK: An Unregulated Marketplace

By Marguerite Arnold
3 Comments
UKflag

You have to give it to this industry. Everyone wants in. And well, Prohibition is so over.

The problem is, particularly here in Europe, for the most part, this is either the tedious process of educating doctors, creating medical grade product that insurers will pay for, or of course, trials to look forward to in the immediate future.

In other words, decidedly less colorful (or at least in the North American sense) if not at lower volume than other places.

In the meantime, particularly filtered via American and Canadian coverage and industry success stories, the British are succumbing to the green magic any way they can.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

Low-THC, CBD products as a result, are flourishing in a way that seems a bit like the “Colorado of Europe.” The early days. When all sorts of strange stories about processing leaked out of the first legalizing state market in the U.S. It is shocking to European eyes, in particular, of late.

“CBD” is, literally, everywhere.

For those with other kinds of experience in the world of cannabis, however, it is both slightly sad and slightly exhilarating. The Brits have the cannabis bug. But they seem a bit lost on where to go next.

What Is The Deal In The UK?

Regulations are weird here. You cannot use the flower of any cannabis flower (including those with under the requisite amount of THC) – also known as hemp. The novel food discussion is lost.

Regardless, there are clearly plans afoot, particularly on the corporate farming level, to begin a transformation of crops to include cannabis sometime soon. And far beyond the farmers, the boys in the city are getting hot under the collar for this kind of green.

London is also turning into (rather predictably) a center of all things cannabis equity.

There are already more specialty funds planning to list on London exchanges than anywhere else in Europe.

Image credit: Flickr

But is this all that surprising?

In the midst of Brexit, a failing NHS, and a society at odds with itself like no time since the 1970’s, the British are facing the cannabis revolution with anything but a stiff upper lip.

When it comes to all things cannabinoids, at least on the CBD side, no matter the odd police raid on a health food store or crunchy vegan experiment on land not protected by the rights of an inherited “country pile”, the cannabis horse, certainly of the broadly stroked CBD variety, is out of the barn.

But What Does this Really Mean?

For the moment? As globally financed companies set up in the UK for all kinds of cannabis trials, the CBD market here is taking on an oddly Bulldog twist.

There is more of a cottage industry of all kinds of CBD products unseen elsewhere in Europe (including from the U.S.). Labeling, testing and sourcing are largely a matter of hit or miss. And just like everywhere else, desperate, sick, depressed people (or those who fear becoming that way) are turning to the CBD miracle to fix a range of conditions.

The problem is that a lot of this is pure snake oil.

Yes, high quality, medical grade CBD does work as a stabilizer (just like THC). But not every oil containing some measure of highly diluted (or worse, contaminated) cannabinoid extract, is the panacea that cannabis offers.

Bottom line? The CBD market in the UK is sort of like Swiss Lite. There are medical trials in the offing, but the country is also in the middle of a constitutional crisis. There are many regulations, and of a bit more fundamentally intrinsic kind, on the line right now. Cannabis is in the room. But so is the Irish Border (the largest if not most existential sticking point in the never-ending Brexit negotiations).

Investing In The UK CBD Market

There are investors who are clearly examining the market, and a few big deals so far, but the vast majority of money flowing into the UK is going into its more flexible (if not frothy) equity market. The British, in other words, may be flailing a bit on domestic implementation, but equity funds in London are in touch with global investors on this issue – even if that money then flows back into Europe.

How very British.

GMP

What Does GMP Mean? And How Is This Different From EU-GMP?

By Marguerite Arnold
No Comments
GMP

The cannabis industry is on the road to legitimacy, no matter the bumps, globally. No matter what, and no matter what happens next, that is a good thing. Issues like supply chain transparency, privacy, consumer and patient safety, and of course energy and water use have long been in the room just about everywhere.

Cleantech Is Cannatech

The modern cannabis industry was birthed and given significant shape in deserts (Israel, California, Nevada). In California, as of 2014, producers were warned, yet again, that they could not avail themselves of federally overseen aquifers of groundwater. The legitimizing industry trucked in what it needed.

On the medical discussion, in Europe, in particular, such issues are now in the room. All medical cannabis must be grown indoors. No exceptions.

That means low energy, high efficiency production is on the rise, not the wane.

What Does GMP Mean?

The overall regulations and operating procedures that surround this discussion are known as “Good Manufacturing Practices,” or GMPs for short. But like all the best acronyms, what the standards are, who sets them, and where they are equivalent is still a shifting picture.

Further, GMPs, and even more particularly EU-GMPs, are specifically referred to this way to distinguish the medically bound product from other consumer protection regulations that include novel food.

european union statesThat said, “GMP practices” differ widely from industry to industry. The idea behind them, however is to prevent harm from occurring to the user, including that the end product is free from contamination, and the packaging as well as manufacture has been well documented. Additional requirements include that personnel are properly trained.

And while the practice, at the pointed end of enforcement can get nerdy, detail-oriented and specific, that is precisely the point. That is also why you might catch another variant of this acronym (cGMP – or current GMP guidelines), to denote a world that is changing fast.

Contamination of the supply chain if not the carbon impact of the same, for all food and plant-based pharmaceutical products is a 21st century problem that is exploding on the scene as fast as the planet warms and cannabis legalizes.

What Do GMP Guidelines Include?

These are guidelines, not steps. As a result, from a bird’s eye view, all international and sovereign national GMP standards include a few basic principles no matter how much they may differ in the weeds. Namely:

  • That manufacturing processes are clean, controlled and processes are verifiable and repeatable. Changes to any and all must also be clearly documented.
  • Record keeping, accurate accounting (of product and on the financial side) must be kept, including complete batch history through manufacture and distribution to the end user. Audits are a way of life.
  • Recall procedures must be in effect.
  • All complaints about products must be examined.

The World Health Organization (WHO) version of GMP is what’s used by pharmaceutical regulators worldwide. The European Union’s EU-GMP standards are seen as roughly equivalent, as are those now practiced in the U.S. by the FDA. That does not mean that confusion does not reign as standards are changing (across Europe, for example, between individual countries, there is still disagreement). However similar GMPs are used in countries including Australia, Canada, Japan, and Singapore. The UK, of course, is slightly different than anyone else but still has regulations that are roughly equivalent and referred to as “The Orange Guide” (in honor of the color of the book’s cover).

You Know It When You See It

Well, not quite. Beyond GMP, there are of course, other classifications for the kind of plant or product being made, manufactured and distributed. And here, along with international treaties about who can trade with whom, also impact this discussion.

It is not correct, however, for example, to claim that what are known as GACP guidelines (good agricultural and collection practices) are equivalent to GMP. Bio, or pesticide free production (in other words) is just one of many steps in meeting much higher standards now in the room for medically bound cannabis.

What Is GMP “Like”?

All industries have “best practices.” For example, the building industry has all sorts of codes and guidelines. However, in addition to this, about a decade ago, LEED (or green building) certification began to be implemented widely. In the U.S., in particular, there was much discussion about how honest such certifications actually were. The term “greenwashing” was frequently used to describe practices that were sold as energy efficient, but in the end cost more, environmentally and otherwise, than they should.

Like LEED, GMP is not a prescribed set of steps but rather best practice guidelines and regulations meant to guide industries on producing safe products – from seed to sale.

How Does This Differ From WHO Guidelines on GACP for Medicinal Plants?

The World Health Organization’s GACP guidelines are highly controversial in this context, especially when it comes to cannabis. Especially because they refer specifically to plants used as medicine that are “grown in the wild.” I.e. not greenhouse. How these guidelines are interpreted by different countries, however, within the context of the interpretation of “medical cannabis” not to mention pharmaceutical GMPs, are very different.

GACP guidelines, in other words, are sometimes the first step in qualification – but certification under the same (starting with outdoor grown crops produced without pesticides for example) is not likely to pass European medical standards any time soon.

Integrated Labeling Helps This Ohio Cannabis Company Grow

By Mike Barker
No Comments

Since medical cannabis was legalized in Ohio in 2016, companies that cultivate and process medical cannabis, as well as the plants themselves, have been popping up around the state.

Grow Ohio, a dual-licensed Level 1 cultivator and processor, was the first licensed processor in Ohio and the first to successfully bring product to market. From plant material to edibles, tinctures, oils, lotions and capsules, the company seeks to ensure that medical cannabis is cultivated and processed under the same strict standards as any pharmaceutical medication. As first to market, Grow Ohio found themselves navigating a complicated process by themselves.

As their first product was ready to be packaged, Executive Vice President (EVP) Justin Hunt and the team at Grow Ohio were focused on marketing, packaging and distributing their product. With the sheer number of items that required attention, it is easy to see how something like labelling can slip under the radar. With a variety of products and dosages, and the first delivery of the product slated for late April of 2019, Grow Ohio needed a consistent way to ensure their product complied with state law, and also satisfied their own brand standards.

As their April product launch date grew closer, Grow Ohio realized they needed help with executing on Ohio’s labeling requirements for medical cannabis products.

They turned to Adaptive Data Inc., a barcode and labeling systems supplier to provide labels, printers, and software. ADI’s task was to specify the right label materials for their branding and compliance needs and provide software and equipment to print compliance labels on demand. ADI’s proposed solution would slash the waste associated with printing and applying labels and create a lean process.

Compliance

Compliance labels must contain specific information and must be prominently visible and clearly legible. Containers have to be labeled with details including the specific quantity of product, dosage, THC levels, license #, testing lab name and ID #, and other details. Different sizes and shapes are required for the various packaging form factors.

Due to the large amount of content and a relatively small label area, ADI specified 300 dpi printer resolution so that 4 or 5 point fonts would be legible.

Hunt had all the information needed to comply with state regulations, but didn’t have a way to get that information, properly formatted, onto a finished label at the point of packaging. “It’s all about how you get the data from one source to the other in a way that is easily repeatable,” says Hunt. The solution provides the capability to handle all compliance requirements, for all types of product and all sizes/shapes of labels. The system is designed to minimize key entry of data, a typical source of content errors. All of Grow Ohio’s products contain THC and require the red THC compliance logo. Early on this requirement was met using a separate, hand-applied THC logo label, which was very costly. The labels now include the THC logo, all required compliance data, and the capability to include a 2d barcode.

At the time the products are packaged all compliance information is printed on demand with label printers. As retail expansion continues, the barcode on the plant material compliance label can be used with the POS systems of the dispensaries, to keep their systems fast and accurate.

Until the system is ready to receive data automatically from METRC, the State approved inventory system which tracks all medical cannabis plants and products grown or produced in Ohio, they used user interfaces that reduce the amount of data that is key entered to an absolute minimum. Using drop down lists, date pickers and calculated results, means that Grow Ohio only enters data in 5-10 fields, depending on product line. As the system evolves the next step will be to take data for compliance details automatically from METRC.

Branding

As the first to enter the medical marijuana market, Grow Ohio leadership knew that their brand image is as important to their success as the quality of their products. Their logo, color choice, and inclusion of the THC logo had to be consistent in appearance across all products, regardless of production method.  They used full color branded product labels and blank labels that have the Grow Ohio and THC logo pre-printed. (Compliance data is added to the blank labels on demand.)

Label Application – Automatic, Semi-automatic and Manual

Grow Ohio packages in metal cans, glass bottles and in boxes. Each packaging type has specific requirements.

Metal Cans: Grow Ohio uses an automated packaging line for plant material in cans. That line includes two automatic apply-only machines (for brand labels). The compliance label is printed and dispensed and placed on the can as it is boxed.

Bottles: Cylindrical containers can be difficult to label. Grow Ohio originally packaged tinctures and oils in glass bottles which were pre-printed with their logo. The printed logo looked nice, but printing on the glass was expensive. This made placing the compliance label on the bottle more difficult, since the logo could not be covered. Positioning and straightness was critical for readability as well as aesthetics. Manual placement was time consuming (15 – 30 seconds per bottle).

Now, bottles are being processed with the help of a semi-automatic print-apply machine. The print-apply machine can label 18-20 bottles per minute.

By using plain bottles and pre-printing the blue Grow Ohio logo and red THC logo on the label, they were able to streamline the process. The semi-automatic print-apply machine adds the compliance data to the label and applies the label to the bottle.

The result is a lower total cost of the product. Plain bottles cost less without the logo and the labor to manually apply the labels has been greatly reduced. In addition, with the logos on the label instead of the bottle, orientation and spacing are no longer an issue. The label maintains the natural brand feel, which was important to Hunt.

Boxes: Only compliance labels are required for boxes as the branding information is pre-printed on the box. Compliance labels for boxes include a pre-printed, red THC logo. The printer prints the compliance data and presents the label with the liner removed, ready to be manually applied to the box.

Summary

With a broad product line, Grow Ohio’s label requirements are quite diverse. By specifying and sourcing the right hardware, software and label materials,

Adaptative Data provided an efficient, repeatable, cost-effective way to do brand and compliance labeling for Grow Ohio’s diverse product offering.  

Hunt now understands the magnitude of work that goes into coming up with a compliant, cost-friendly compliance labeling approach – an appreciation he did not have at the outset. He is not alone in this regard as many companies come to this understanding late in the start-up process.

Hunt isn’t sure how fast the market will grow, but he is not worried. As the market expands and demand grows, he knows his systems can handle it.

From The Lab

Spotlight on Encore Labs: Servicing the Cannabis Market in California

By Kristen Hogerheide
No Comments

Encore Labs is a full-service cannabis testing lab in Pasadena, California, providing all testing needs required by California’s Bureau of Cannabis Control (BCC). The BCC requires that cannabis products being sold in licensed dispensaries be tested for cannabinoid potency, heavy metals, microbial impurities, moisture content and water activity, mycotoxins, residual pesticides, residual solvents and processing chemicals, foreign materials and terpenes. It is Encore Labs’ goal to guarantee the quality and potency of all cannabis products while ensuring regulatory guidelines are met in the state of California.

Encore Labs provides quick turnaround times on a consistent basis. They take pride in offering excellent customer service without diminishing the quality of the work that they do. Their team of laboratory analysts/technicians are passionate about the industry and will never compromise their integrity just to make an extra buck.

Co-Founder, Spencer Wong, mentions their personal connection with clients. “Our customers don’t just see us as their testing laboratory, they see Encore Labs as their laboratory partner,” says Wong. “Besides performing analytical testing, we have worked with many customers to help formulate new products and do root cause analysis to pinpoint inefficiencies in their manufacturing operations and cultivation farms.”

ISO/IEC 17025 Accreditation has been extremely valuable to Encore Labs, especially regarding the new cannabis testing industry. “Our experience with Perry Johnson Laboratory Accreditation, Inc. has been great and has allowed for a very smooth and straightforward initial accreditation process. Their staff has been knowledgeable and responsive every step of the way,” says Wong.

Accreditation establishes that steps are being taken regarding quality and that laboratories are meeting and exceeding the highest testing standards. It also provides further assurance and confidence in data results as well as validated methods, staff training procedures, equipment calibration and successful participation in proficiency testing/interlaboratory comparisons.

Starting out with 1500 square feet of laboratory space, within the last year Encore Labs has doubled its work area. In order to meet the growing demand of the cannabis testing industry, they have added plans to once again double in size by the end of 2019, as well as open a second laboratory by the end of 2020.

Cannabis Featured At Germany’s ExpoPharm For The First Time

By Marguerite Arnold
1 Comment

Expopharm is a big deal in Germany and Europe beyond that. It is the largest expo for pharmacists on the continent.

This year, there were two firsts in a convention already looking to the future with digitalization – itself a huge issue in not only the European medical space, but Germany in particular. There is a national obsession with privacy auf Deutschland that does not exist anywhere else.

Beyond digitalization, however, medical cannabis was also a major theme this year. Many of the largest producers and distributors showed up in force. So did the smaller, newer ones. There are now 19 licensed importers in the country – and quite a few of them showed up in Dusseldorf last week.

Beyond that, the expo also saw the birth of the VCA – the Verband der Cannabis versorgende Apotheken e.V (German Cannabis Pharmacists Association). This is a group of pharmacists who are on the front lines of the medical cannabis revolution on its most complicated, expensive and paper-laden end, determined to make their voices heard.

the VCA ,German Cannabis Pharmacists Association

According to Tobias Loder, the owner of Luxe 99 Apotheke in Cologne and one of the organizers of the VCA, “There is huge interest in our association.”

For those of American extraction, at least, there has yet to be such a conference anywhere in the U.S. simply because of the lack of acceptance at the federal level of cannabis as medicine. In Canada, and elsewhere, national pharmacy chains are already getting into the action.

Germany, however, remains the strange, and as a result, most interesting exception.

In Düsseldorf this year, despite added traffic and a great deal of excitement, cannabis as medicine was, as the press attendant said as he handed out the Cannabis Industry Journal press pass, “par for the course” and “no big deal.” Even though of course, the generation of all the interest and intrigue.

The drug is, while still highly stigmatized, on its way to legitimacy here. And in a decidedly normal, Deutsch weg (way).

The Inside Skinny On What Is Changing For German Pharmacists

As revealed during the Denton’s medical cannabis conference in Berlin in late September (about a day before the news hit the expo floor in fact), things are indeed changing at the last mile of the regulated cannabis path. Why?

Several reasons.

Within the next thirty days, doctors will be able to prescribe up to 100 grams of floss (dried cannabis flower) or cannabis oil by the gram per patient prescription. That means that patients can indeed go to the doctor every three months – and that there are in fact more regular users in the system. This is also an indication that the supply chain is also beginning to normalize – although there is a huge demand so far unmet by supply. And as a result, while two of the three bid winners are now getting down to cultivation, imports are still the name of the game.

On this front, things are also changing. Cannabis just came into the country from Portugal. Other countries lining up to import include not only Canadian producers, but those from Spain, Malta, Greece, Australia, South Africa, Columbia and of course, Israel.

This is also a step towards international normalization on the pharma side. Schedule II narcotics in the American system are dispensed every 90 days.

The rules about pharmacy mark-ups are also in flux. One of the reasons, for example, that medical cannabis has been so expensive is that, up until now, at least, pharmacists were required to mark up such product 100%. That is also changing. In fact, the Federal Union of German Associations of Pharmacists (ABDA) and the National Association of Statutory Health Insurance Funds (GKV Spitzenenverand) have had to agree on a new surcharge that is expected to see significant and immediate savings of a projected 25 million euros.

It is not a casual argument or discussion. One of the reasons that the German pharmacy vertical has remained so strong and resistant to buyouts and consolidations is that by law, owners are limited to no more than three (and in so far one case discovered by CIJ in Bavaria) four brick and mortar pharmacies. The reduction in this preparation surcharge means that pharmacies will have to find ways to become more efficient. That is also a concern for the VCA, who, among other things, are looking to reduce their own overhead costs while gearing up to serve more patients.

Digitalization, innovation and more, in other words, is on the table. And German pharmacists, for one, are not only on the front line – but stepping up to the challenge.