Tag Archives: product

November 8, 2019

Multi-Element Analysis Using ICP-MS: A Look at Heavy Metals Testing

By Cannabis Industry Journal Staff

Across the country and across the world, governments that legalize cannabis implement increasingly rigorous requirements for laboratory testing. Helping to protect patients and consumers from contaminants, these requirements involve a slew of lab tests, including quantifying the levels of microbial contaminants, pathogens, mold and heavy metals.

Cannabis and hemp have a unique ability to accumulate elements found in soil, which is why these plants can be used as effective tools for bioremediation. Because cannabis plants have the ability to absorb potentially toxic and dangerous elements found in the soil they grow in, lab testing regulations often include the requirement for heavy metals testing, such as Cadmium, Lead, Mercury, Arsenic and others.

In addition to legal cannabis markets across the country, the USDA announced the establishment of the U.S. Domestic Hemp Production Program, following the enactment of the 2018 Farm Bill, essentially legalizing hemp. This announcement comes with information for hemp testing labs, including testing and sampling guidelines. While the information available on the USDA’s website only touches on testing for THC, required to be no greater than 0.3% dry weight concentration, more testing guidelines in the future are sure to include a discussion of heavy metals testing.

Table 1. ICP-MS operating conditions (shaded parameters were automatically optimized during start up for the HMI conditions).

In an application note produced by Agilent Technologies, Inc., the Agilent 7800 ICP-MS was used to analyze 25 elements in a variety of cannabis and hemp-derived products. The study was conducted using that Agilent 7800 ICP-MS, which includes Agilent’s proprietary High Matrix Introduction (HMI) system. The analysis was automated by using the Agilent SPS 4 autosampler.

Instrumentation

The instrument operating conditions can be found in Table 1. In this study, the HMI dilution factor was 4x and the analytes were all acquired in the Helium collision mode. Using this methodology, the Helium collision mode consistently reduces or completely eliminates all common polyatomic interferences using kinetic energy discrimination (KED).

Table 2. Parameters for microwave digestion.

As a comparison, Arsenic and Selenium were also acquired via the MassHunter Software using half-mass correction, which corrects for overlaps due to doubly charged rare earth elements. This software also collects semiquantitative or screening data across the entire mass region, called Quick Scan, showing data for elements that may not be present in the original calibration standards.

SRMs and Samples

Standard reference materials (SRMs) analyzed from the National Institute of Standards and Technology (NIST) were used to verify the sample prep digestion process. Those included NIST 1547 Peach Leaves, NIST 1573a Tomato Leaves and NIST 1575 Pine Needles. NIST 1640a Natural Water was also used to verify the calibration.

Samples used in the study include cannabis flower, cannabis tablets, a cannabidiol (CBD) tincture, chewable candies and hemp-derived cream.

Sample Preparation

Calibration standards were prepared using a mix of 1% HNO3 and 0.5% HCl. Sodium, Magnesium, Potassium, Calcium and Iron were calibrated from 0.5 to 10 ppm. Mercury was calibrated from 0.05 to 2 ppb. All the other elements were calibrated from 0.5 to 100 ppb.

Table 3. Calibration summary data acquired in He mode. Data for As and Se in shaded cells was obtained using half mass correction tuning.

After weighing the samples (roughly 0.15 g of cannabis plant and between 0.3 to 0.5 g of cannabis product) into quartz vessels, 4 mL HNO3 and 1 mL HCl were added and the samples were microwave digested using the program found in Table 2.

HCI was included to ensure the stability of Mercury and Silver in solution. They diluted the digested samples in the same acid mix as the standards. SRMs were prepared using the same method to verify sample digestion and to confirm the recovery of analytes.

Four samples were prepared in triplicate and fortified with the Agilent Environmental Mix Spike solution prior to the analysis. All samples, spikes and SRMs were diluted 5x before testing to reduce the acid concentration.

Calibration

Table 4. ICV and CCV recovery tests. Data for As and Se in shaded cells was obtained using half mass correction tuning.

The calibration curves for Arsenic, Cadmium, Lead and Mercury can be found in Figure 1 and a summary of the calibration data is in Table 3. For quality control, the SRM NIST 1645a Natural Water was used for the initial calibration verification standard. Recoveries found in Table 4 are for all the certified elements present in SRM NIST 1640a. The mean recoveries and concentration range can also be found in Table 4. All the continuing calibration solution recoveries were within 10% of the expected value.

Internal Standard Stability

Figure 2 highlights the ISTD signal stability for the sequence of 58 samples analyzed over roughly four hours. The recoveries for all samples were well within 20 % of the value in the initial calibration standard.

Figure 2. Internal standard signal stability for the sequence of 58 samples analyzed over ~four hours.

Results

In Table 5, you’ll find that three SRMs were tested to verify the digestion process. The mean results for most elements agreed with the certified concentrations, however the results for Arsenic in NIST 1547 and Selenium in both NIST 1547 and 1573a did not show good agreement due to interreferences formed from the presence of doubly-charged ions

Table 5. Mean concentrations (ppm) of three repeat measurements of three SRMs, including certified element concentrations, where appropriate, and % recovery.

Some plant materials can contain high levels of rare earth elements, which have low second ionization potentials, so they tend to form doubly-charged ions. As the quadrupole Mass Spec separates ions based on their mass-to-charge ratio, the doubly-charged ions appear at half of their true mass. Because of that, a handful of those doubly-charged ions caused overlaps leading to bias in the results for Arsenic and Selenium in samples that have high levels of rare earth elements. Using half mass correction, the ICP-MS corrects for these interferences, which can be automatically set up in the MassHunter software. The shaded cells in Table 5 highlight the half mass corrected results for Arsenic and Selenium, demonstrating recoveries in agreement with the certified concentrations.

In Table 6, you’ll find the quantitative results for cannabis tablets and the CBD tincture. Although the concentrations of Arsenic, Cadmium, Lead and Cobalt are well below current regulations’ maximum levels, they do show up relatively high in the cannabis tablets sample. Both Lead and Cadmium also had notably higher levels in the CBD tincture as well.

Table 6. Quantitative data for two cannabis-related products and two cannabis samples plus mean spike recovery results. All units ppb apart from major elements, which are reported as ppm.

A spike recovery test was utilized to check the accuracy of the method for sample analysis. The spike results are in Table 6.

Using the 7800 ICP-MS instrument and the High Matrix Introduction system, labs can routinely analyze samples that contain high and very variable matrix levels. Using the automated HMI system, labs can reduce the need to manually handle samples, which can reduce the potential for contamination during sample prep. The MassHunter Quick Scan function shows a complete analysis of the heavy metals in the sample, including data reported for elements not included in the calibration standards.

The half mass correction for Arsenic and Selenium allows a lab to accurately determine the correct concentrations. The study showed the validity of the microwave sample prep method with good recovery results for the SRMs. Using the Agilent 7800 ICP-MS in a cannabis or hemp testing lab can be an effective and efficient way to test cannabis products for heavy metals. This test can be used in various stages of the supply chain as a tool for quality controls in the cannabis and hemp markets.

Disclaimer: Agilent products and solutions are intended to be used for cannabis quality control and safety testing in laboratories where such use is permitted under state/country law.

November 8, 2019

California Suspends Almost 400 Licenses

By Cannabis Industry Journal Staff

2 Comments

On November 1^st, the Bureau of Cannabis Control (BCC) sent notices to 394 businesses in California that their licenses will be suspended until they comply with certain traceability system requirements. This story was first reported by John Schroyer at Marijuana Business Daily.

On Wednesday, November 6^th, the number of licenses suspended dropped to a total of 385, including 63 retailers, 61 delivery services, 47 microbusinesses, 185 distributors and 29 transportation licenses. That’s almost 5% of all the cannabis business licenses in California.

According to Alex Traverso, spokesman for the BCC, licensees were given plenty of opportunities to fix their errors. Businesses were given notice that they needed to enroll in Metrc within five days following their provisional licensing. The BCC gave those businesses a reminder roughly three months ago and sent an additional warning in late October regarding the deadline.

It’s a relatively easy fix for those trying to get back in compliance. The rationale behind suspending the licenses is that those businesses need to undergo a mandatory traceability system training so they know how to use Metrc and get credentialed. Enroll in the Metrc system, get credentialed and your license should be restored.

“It’s relatively simple to get your license out of suspension,” Traverso told KPBS News. “These are growing pains. I think we knew it was going to be a process and it was going to take some time, and that it was going to be an adjustment period for a lot of people who have been doing things one way for some time now.”

Traverso added that about 80 businesses enrolled in the Metrc system as soon as they received the notice that their license is suspended. Those licenses should be restored to active shortly, Traverso said.

November 7, 2019

Bremen Steps Up Its Cannabis Campaign As Other Groups Lobby For More Access

By Marguerite Arnold

No Comments

The German city of Bremen (perhaps you know it from the Brothers Grimm and the animal musicians) is determined to force the federal German government to play another tune when it comes to basic access within the city.

For those without the special geographic knowledge that comes with being a “local” this is also a deliberately strategic political move. Bremen, like Berlin, is a strange German hybrid, a city-state.

Change here, of course, like Berlin, would have wide impact on other German states.

It is not a new campaign of course. None of these city campaigns for home-grow really are. They are the result of efforts, at this point with elected officials involved, of literally decades of patient activists, who are still necessary. But this time, they have politicians involved. When the national ones don’t listen, the local ones are being dragged in.

That said, don’t expect any breakthroughs or miracles from Bremen or Berlin either right now for that matter. This experiment, in Bremen just like the country’s capital, is still at least several years off, no matter its regular recycling in news stories for the last several years.

Politically right now it is hard to understand the CDU’s continued reluctance to embrace the weed. The CDU is Germany’s strongest and largest “middle of the road” party. Particularly because they along with everyone else of alternative political persuasions are highly alarmed by the right wing AfD’s popularity and spread. It is not inconceivable that even Germany’s largest if not highly beleaguered party might use a little cannabis to stop that. And they are being pushed, hard now, by the fringes.

The Outpricing Of The Patient Movement

Talk to any cannabis-connected company right now and chances are you will hear the phrase “patient first.”

That means nothing in an environment where most patient groups are kept out of the room when legislation opening markets is being written (certainly in Europe). And of course, it is precisely the individuals that these groups represent who cannot afford the legal medication hitting the markets early.

Here, because of the focus on high-quality, GMP-certified product, the chances of a patient collective actually being able to afford a cultivation license (for example) are so far non-existent.

As a result, there is an active foment on the ground right now in almost every country in Europe. This is meeting other kinds of frustration right now and that can be a powerful weapon for change. However, without funded lobbyists in most European capitals and Brussels, there is more power and money behind the established industry right now to keep the (almost) status quo.

As strange as they seem to the cannabis industry right now, GMP certification is a standard pharmaceutical designation.

The boogeymen in the room right now, in other words, for every strong patient group, with its own grey market distribution channels, are the well-funded companies who are in fact getting the laws to change.

Patients, in these environs, as well as their concerns, are left out entirely.

The Strength of The European Gray Market

For this very reason, the gray market problem is going to be large in Europe for quite some time to come. Patients are effectively priced out of the legitimate market if they cannot get insurer approvals and for most that is still the biggest problem in the room.

Are there large gray market grows all over Europe? Yes. As one German activist told Cannabis Industry Journal recently, echoing the comments and practices of thousands of others, “Yes, they made me jump through the hoops, and I have packaging from all the big guys. That’s how I carry my home grow these days.”

Forget “patient cards” that some enterprising distributors are trying to get patients to carry.

The cops don’t challenge legit packaging. And every producer, distributor and patient knows that. Buy once, no matter how exorbitant, and that is all she wrote.

For that reason, “patient numbers” if not “sales” actually mean very little.

It does not matter, in other words, if a cannabis company announces its market entry in any country right now. What matters is that they can prove consistent supply and sales and real patient numbers – which if GDPR (European privacy legislation) is strictly followed, producers and distributors should never really know at a level that such sales are trackable per patient.

And that is where this all gets difficult down in the weeds.

Are there large gray market grows all over Europe? Yes. Are they all under the purview of the criminal black market? No. There are very organized patient non-profit networks locally in just about every city and town in Europe. If not other places.

And, where those fail, certainly in Germany, there is always the area around every local train station. If you are hard up enough and desperate enough, skunk and hash albeit of an indeterminate source, will cost you about $12 per gram.

There is no cannabis company in the room anywhere in Europe that can provide legit product via any pharmacy, for that price at point of sale. Yet. And therein, as always, lies the rub.

November 6, 2019

Cannabusiness Sustainability

Designing More Sustainable Cannabis Facilities

By Sophia Daukus

1 Comment

The topic of sustainability has grown in importance and priority for both consumers and regulators. From reducing emissions to lowering energy and water consumption, cannabis growing facilities face unique challenges when it comes to designing sustainable operations. Moreover, as the cannabis market grows and usage becomes more accepted, regulatory bodies will continue to increase the number of directives to help ensure the safety and quality of cannabis products.

Non-porous flooring options are impervious in nature, helping to isolate contaminants on the surface, thus enabling proper cleanup and disposal.

Ubiquitous throughout cannabis grow rooms and greenhouses, flooring can be easily overlooked, yet offers an economical way to create more sustainable facilities. Many of today’s grow rooms are located in old retrofitted warehouses or former industrial buildings that were designed without sustainability or environmental concerns in mind.

Combined with energy efficient lighting and more thoughtful water usage, flooring can help create a more efficient facility that not only improves business operations, but also contributes to a better bottom line.

Sustainability Challenges Facing Cannabis Facilities

Whether in an old warehouse space or a new structure designed from the ground up, cannabis businesses face unique operational challenges when it comes to sustainable best practices.

Energy Consumption: Like any indoor farm, lighting plays an important role in cannabis growing facilities. Traditional grow lights can utilize a large amount of electricity, putting a strain on the company budget as well as regional energy resources. Switching to highly-efficient LED lighting can help facilities reduce their consumption, while still maximizing crop yield.
Water Consumption: Among the thirstiest of flora, cannabis plants require consistent and plentiful watering for healthy and fruitful crop production.
Carbon Dioxide (CO₂) Enrichment: In many cases, carbon dioxide is introduced into facilities to help enhance the growth of crops. However, this practice may pose safety and health risks for workers, the surrounding community and the planet at large. CO₂ is a greenhouse gas known to contribute to climate change.

In order to head off upcoming regulatory restrictions, as well as to alleviate the mounting safety and health concerns, it behooves cannabis grow room managers and owners to explore alternatives for improving sustainability in their facilities.

Flooring Requirements for More Sustainable Cannabis Facilities

Spanning thousands or even hundreds of thousands of square feet throughout a facility, flooring can be a unique way to introduce and support sustainable practices in any grow room or greenhouse.

When seeking to improve operational efficiency and implementing the use of sustainable practices in cannabis facilities, look for flooring systems with the following characteristics:

Impervious Surfaces— Fertilizers, fungicides, and other chemicals can infiltrate porous unprotected concrete to leach through the slab matrix and into the soil and groundwater below. Non-porous flooring options, such as industrial-grade, fluid-applied epoxies and urethanes, are impervious in nature, helping to isolate contaminants on the surface, thus enabling proper cleanup and disposal.
Light-Reflective Finishes— Light-colored white or pastel floor surfaces in glossy finishes can help reduce the amount of energy needed to properly illuminate grow rooms. By mirroring overhead lighting back upward, bright, light-reflective flooring can help minimize facilities’ reliance on expensive ceiling fixtures and electricity usage.
USDA, FDA, EPA, OSHA and ADA Compliancy— With cannabis industry regulations currently in flux, grow facilities that select food- and pharmaceutical-compliant flooring will be ahead of the game. Governing bodies in some states have already begun expanding the facility requirements of these sectors to the cannabis market.
Durable and Easy Care— Having to replace flooring every couple of years imposes high costs on businesses as well as the environment. Installation of many traditional types of flooring produces cut-off waste and requires landfill disposal of the old floor material. In contrast, by installing industrial-grade flooring systems that are highly durable and easy-to-maintain, facilities can count on long-term performance and value, while helping to minimize disposal costs and concerns.

Optimal flooring can help cultivation facilities reduce waste, improve the efficacy of existing lighting and lengthen floor replacement cycles for a better bottom line and a healthier environment. Additionally, having the right grow room floor can assist facilities in meeting regulatory requirements, help ensure production of quality products and improve the safety for consumers and staff.

Flooring Benefits for Employees and Consumers

Safety is paramount in any workplace. When it comes to the manufacture of foodstuffs and other consumed products, government oversight can be especially stringent. With the right compliant flooring in place, cultivation facilities can focus on the rest of their business, knowing that what’s underfoot is contributing to the safety of employees and their customers.

Here’s how:

Chemical Resistance— Floors can be exposed to a high concentration of chemicals, acids and alkalis in the form of fertilizers, soil enhancers and other substances. In processing locations, the proper disinfecting and sanitizing of equipment can require harsh solvents, detergents and chemical solutions, which can drip or spill onto the floor, damaging traditional flooring materials. It pays to select cannabis facility flooring with high chemical resistance to help ensure floors can perform as designed over the long term.
Thermal Shock Resistance— Optimal cannabis facility flooring should be capable of withstanding repeated temperature cycling. Slab-on-grade structures in colder climates may be especially vulnerable to floor damage caused by drastic temperature differences between a freezing cold concrete slab and the tropical grow room above. This extreme contrast can cause certain floor materials to crack, delaminate and curl away from the concrete substrate. The resulting crevices and uneven surfaces present trip and fall hazards to employees and leave the slab unprotected from further degradation. As an alternative, thermal shock-resistant floors, such as urethane mortar systems, furnish long-lived functionality even when regularly exposed to extreme temperature swings.
Humidity and Moisture Resistance— Traditional floor surfaces tend to break down in ongoing damp, humid environments. Cannabis facility flooring must be capable of withstanding this stress and more.
Pathogen Resistance— Undesirable microbes, fungi and bacteria can thrive in the moist, warm environments found in grow rooms. Floors with extensive grout lines and gaps provide additional dark, damp locations for pathogen growth. Fluid-applied flooring results in a virtually seamless surface that’s directly bonded to the concrete. Integral floor-to-wall cove bases can further improve wash down and sanitation.
Proper Slope and Drainage— Where food and/or pharmaceutical facility regulations have already been extended to cannabis operations, flooring is required to slope properly toward a floor drain. This prevents puddling, which can be a slip hazard as well as a microbe breeding ground. Unlike more typical materials, resinous flooring offers an economical solution for correcting floor slope wherever needed.

The Problems Presented by Traditional Flooring Options

Previously, cannabis growers often relied on traditional greenhouse-type flooring, including tamped down dirt floors, gravel or bare concrete. However, current and upcoming regulations are curtailing the use of these simple flooring options.

Growers often compare and contrast the benefits and value of traditional greenhouse flooring with more modern solutions, such as fluid-applied epoxy and urethane floors.

Dirt and gravel flooring offers little opportunity to properly sanitize, thus potentially inviting microorganism and pathogen invasion, contamination and costly damage. Growers who have turned to bare concrete floors face other concerns, including:

Unprotected concrete is inherently porous and therefore able to quickly absorb spilled liquids and moisture from the air. In addition, organic and synthetic fertilizers, fungicides, and chemicals can leach through the concrete floors, contaminating the groundwater, injuring the surrounding environment and wildlife.
Older slabs often lack an under-slab vapor barrier. Even in new construction, a single nail hole can render an under-slab barrier ineffective. In these situations, moisture from underneath the floor slab can move upward osmotically through the alkaline slab, leading to blistering and damage to standard commercial floor coverings.
Bare concrete floors can stain easily. These dark stains tend to absorb light instead of reflecting it, contributing to a potential increase in energy usage and cost.
The mold proliferation encouraged by the warmth and humidity of grow rooms can easily penetrate into the depths of unprotected slab surfaces, eventually damaging its structural integrity and shortening the usable life of the concrete.

While traditional greenhouse flooring options can initially seem less expensive, they frequently present long-term risks to the health of cannabis grow businesses. In addition, the performance of dirt, gravel and bare concrete floors runs counter to the industry’s commitment to reducing the carbon footprint of growing facilities.

Choosing Sustainable Grow Room Flooring

It’s no secret that the cannabis industry is undergoing enormous change and faces numerous environmental challenges. Luckily, optimal flooring options are now available to help growers economically increase their eco-friendly practices on many fronts. By focusing on quality resinous flooring, cannabis growers can get closer to meeting their sustainability goals, while simultaneously contributing to improved operation efficiency, enhanced yields and an increased bottom line.

November 6, 2019

Keep Your Cannabis Product Safe with Dependable Packaging

By Danielle Antos

No Comments

No matter what type of packaging you select for your cannabis product, it needs to be dependable. Packaging is not only the first impression of your company to consumers; it must securely contain and protect the product inside. No one wants to purchase products inside packaging that looks dirty or isn’t sealed properly – it is imperative that packaging looks clean and safe to consumers. How does your cannabis packaging stack up? Is it sealed properly? Is it clean and defect-free? Does it conform to the ever-changing regulations?

Using plastic bottles and closures is a great way to secure your cannabis product and showcase your brand. Plastic cannabis packaging offers many different options: bottles can be produced using sustainable materials and come in many different shapes and capacities. Typical closures are child-resistant, lined or unlined, and with a text or pictorial top.

Because packaging performs so many functions for your cannabis business, it is important to realize that not all plastic bottles and closures are the same. High density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP) and polyethylene terephthalate (PET) bottles and closures are widely used for cannabis packaging. Keep in mind that bottle selection is only half of the equation. Equally important is selecting a closure that works with the bottle and has the right features you need.

So, how do you select the right plastic closure for your cannabis bottles? Your packaging manufacturer should be able to guide you towards the solution that’s right for you. However, there are several key factors that will help you identify a superior packaging solution.

Closure Seal

Unevenly manufactured bottle tops can result in poor closure seals and an increased risk of product contamination. Choosing the incorrect lining material can lead to poor protection of your product or may not provide the proper tamper evidence required by regulatory agencies.

A bad seal can also jeopardize the freshness of your cannabis product. It can cause the flower to become excessively dry, resulting in overfilling to make up for weight loss. Situations like these can lead to higher product costs for your company.

Child-Resistant

What’s more important than keeping cannabis out of the hands of children? Child-resistant (CR) packaging not only increases safety; it instills consumer trust in your products and your brand. A closure that doesn’t fit the bottle can prevent the bottle and closure from working properly together, leading to possible accidents if the product is around children. CR closures are available in many different styles and functions – from traditional push-and-turn systems to snap caps and more.

Individual states are cracking down on child-resistant packaging certification for cannabis products. Although FDA approval is not currently required, it will be in the future. Be a leader in the cannabis industry and make preparations now to be compliant with future regulations.

Senior-Friendly

Closures can be child-resistant and at the same time be senior-friendly. Select closures that enable use by individuals who may have problems opening traditional capping systems. Innovative companies are designing closure systems that can be both safe for children as well as easy-to-open for those who have difficulty using their hands.

Compatible Bottles

Be sure that the closure you select works correctly with your chosen bottle. Can your packaging partner manufacture and supply closures that guarantee complete functionality with the bottle to protect your product? Closures produced by the same manufacturer as the bottles will ease your mind that the closure and bottle function correctly together. A one-stop-shop approach will also save you time and money.

Country of Origin

Is the packaging you use manufactured in the United States? Plastic bottles and closures manufactured overseas may have impurities in the resin or colorant that could leach or bleed into your cannabis products. They may not have documentation of origin or comply with FDA regulations. Your cannabis packaging partner should be able to provide this documentation so you can rest assured that your bottles and closures are manufactured under strict guidelines for the safety of your consumers and that your product won’t be affected. In today’s emerging cannabis market, there are stringent regulations on all types of cannabis packaging. If you use packaging that does not conform to regulations, you are putting your company at risk for product recalls, decreased sales due to low consumer confidence and other undesirable risks.

Selecting poor closures and bottles for your cannabis packaging can have long-term consequences. Not only will your brand be diminished, but your profitability will be reduced as well. Understanding how to identify the characteristics of quality plastic packaging that can help you avoid declining consumer confidence and lost sales. Work with a plastic packaging manufacturer that understands how important perfect quality is to your business.

October 30, 2019

The Economics of Ex-Im In Europe

By Marguerite Arnold

No Comments

You have read the press releases. You may have heard about such ideas at a recent cannabis conference in and around the EU of late. Or you may have encountered new distributors coming into the game with a German presence and a decidedly interesting ex-im plan that sounds a bit, well, off the map.

No matter how geographically creative some of these plans are, the problem is that many of these ideas literally do not make economic sense. Either for the companies themselves (if not their investors), and certainly not for patients. Not to mention, truth be told, the looming price sensitivity issues in the European market that North Americans, for starters, seem to still just be waking up to.

Some Recent Examples….

Yes, exports from Denmark have been much in the news lately (including into both Germany and Poland). Truth be told, however, this makes about as much sense, economically, as importing ice to eskimos. Why? Denmark, for all its looser regulations and less-uptight approach to the cannabis discussion generally, is one of the most expensive labour markets in Europe. Fully automated production plants are one thing, but you can build those in other places too. Especially warmer climates, with lots of sunshine. German production, as it comes online, will also make this idea increasingly ludicrous.

Who on earth got on this bandwagon? It seems that the enthusiasm in the room began when Denmark began to import to Germany (where the disparities in wages in production are not so noticeable). However, lately, several Canadian companies with a Danish footprint have been eying Poland of late.

And on that particular topic – there are many who are doing the math and trying to figure out, as the alternatives get going, if even Canada makes much sense, or will in a few years.

Low Wage Markets With Sunshine Are Hotspots For European Cannabis Production

Like it or not, the European market is extraordinarily price sensitive – namely because it is not “just” consumers called patients picking up the tab but health insurance companies demanding proof of medical efficacy.

That starts, a bit unfortunately, with understanding wage economics across Europe. The warmer the climate, in other words and the further east on the map, wages drop precipitously. That is “good” for an industry looking to produce ever cheaper (but more compliant) product.

It is also good, at least politically, for countries whose elected leaders are being forced to admit that cannabis works, but are less than copacetic about encouraging local production. See Germany for starters, but places like Austria, Poland and most recently France (which has just embarked on a first of its kind medical cannabis trial).

Here, no matter the temporary buzz about Denmark, are the places that cannabis production makes sense:

Portugal: The country is a newcomer in the cannabis discussion this fall, although in truth, the seeds of this reality were sown several seasons ago when Tilray began to build its production plant in the country in 2017. They are far from the only company who has seen the light, and these days, farmers are getting hip to the possibilities. Especially if they are already exporting crops throughout Europe.

Spain: The industry that can afford GMP certification is getting going, but everyone else is stuck in a limbo between pharmaceutical producers and the strange gray market (see the patient clubs in Barcelona). That said, political groups are beginning to discuss cultivation as an economic development tool, if not sustainable food and medication strategies.

Greece: The weather is warm, and the investment climate welcoming. Of all the countries in the EU, Greece has embraced the economic possibilities that cannabis could bring. How that will play out in the next years to come is an intriguing story.

Italy: The southern part of the country in particular is ripe for cannabis investment and it’s full of sunshine. However, as many have noted, organized crime in this part of the world is a bit fierce and starts with the letter M.

Malta: The island is a comer, but does importing cannabis from here really make economic sense? There are trade routes and economic treaties tying the island both to the apparently Brexiting British and Europe. Why not, right? Just remember that along with labour, transportation costs are in the room here too.

And Just Outside The EU…

The country now (sort of) known as North Macedonia and struggling to get into the EU if France would just get out of the way is also going to be a heavyweight in this discussion for years to come. Wages, of course, will increase as part of EU membership, but in general, this country just north of Greece is going to play a highly strategic role in exports throughout Europe.

October 30, 2019

Poland Gets Cracking (Sort Of)

By Marguerite Arnold

2 Comments

One of the surest ways to understand that you are entering not just another country, but what is called an “emerging market” is when you travel from Germany to Poland by train.

There is only one “intercity” option from Berlin Hauptbahnhoff – a far cry from the modern, internet-connected, fast ICE trains that go West. This line is run by the Poles. By the time you reach Warsaw five hours later, however, it is clear at least some parts of this country are booming. The skyscraper construction in the center of town rivals London and Berlin.

Like every emerging market, there are vast disparities in wealth and income, if not opportunity here. And into this discussion, now is coming the entire cannabis discussion. Visiting, as an American, in particular, one is reminded of a city that could be East Berlin 15 years ago.

As a cannabis journalist, it feels, from this perspective, like every American state in the 1990’s. Reform is on the tip of everyone’s tongue. But not quite realized yet, except for a few elites. Beyond such realities which are common in the world of cannabis, how very, well, Iron Curtain.

The difference of course, these days, is that the conversation next door in Germany, as well as other places, is finally forcing the Polish government to face reality. But it is clear, from interviews with activists and patients in particular, as well as the nascent newcomers from abroad testing the cannabis waters, that this fight is not going to be easy on the ground.

Then again, when and where has it ever been?

The Patients….

As always, real reform and market opening is driven by the sheer numbers of sick people who brave arrest to gain access to the plant. Some do it for themselves. Many do it for their children (of all ages). An elderly, boomer couple who talked to Cannabis Industry Journal about their ordeal also see it as a form of justified struggle. And Poles are no strangers to that, far from the cannabis kind.

That ethic is much in the room among the nascent industry that is also struggling to find respect. The Polish side of the discussion is looking at hemp. And growing THC illicitly, just like elsewhere.

But the budding movement here is highly organized, including on the business end, with hundreds of thousands of members. How this translates into a legal industry (besides media and hemp products) is of course, still up for grabs.

That is very much in the minds of those who brave the struggle daily. The patient collective in Warsaw is also highly organized – providing free and non-profit product to those most in need. It is an impressive operation. And further one that is increasingly distrustful of foreigners seeking “market share.” If not the already floating “suits.” Just knowing how to speak Polish, as the activists are, at least realizing, is not a guarantee that they will not be dealing with cannasharks only interested in their contacts and mailing lists. Patients over profits is a phrase you hear a lot here. This has nothing to do with not wanting to support a legit, safe industry. But when you are poor, you find ways to improvise. Including getting your medication.

The Foreign Companies…

Aurora and Canopy Growth are already in the room and there are other Canadians lining up to follow. However, these two are the only ones so far who have been able to get their products registered locally and even then, availability is still in the offing.

These are also highly expensive products. And do not begin to compete with producers now eying the Polish market from North Macedonia and the rest of Eastern Europe.

The foreign companies, in other words, are already broadly falling into two camps. North American curiosity seekers (at this point), and companies, mostly from the East and South, who are looking to Poland to be the “next Germany.” Especially because their product is so price and geographically convenient.

A Battle For Poland’s Emerging Market

It is clear that at least the Canadian companies are already lining up against more home grown and patient interests. Just as what happened in Germany and the rest of Europe so far. And not even on purpose, but more on matters of price.

Like other pre-commoditized markets, the Polish industry is still trying to be (relatively) equal and fair, as much as there is a huge amount of positioning already just below the surface. Everyone is tired of struggling. Dreams of cannabis riches are enticing just about everywhere.

Of course, add to that, patients are dying here, and that always sets the tone – especially when only the richest and lucky few can afford to access the drug through legitimate channels. Face pain, unpleasantness or death or buy in the black market? For the Polish industry on the forefront of the debate, in other words, the stakes are high, the government is moving glacially, and those on the ground are organizing to meet the winds of change.

Foment for another kind of Green Perostroika? Perhaps.

There will, almost certainly as a result of these forces, be a call for a Polish bid – and further one that allows for local producers to enter the medical market.

But the bottom line is that this strange, and exciting and certainly new market is going to be as volatile, and wild west as any in Europe for the immediate future. Expect interesting things, if not more of the same.

October 29, 2019

USDA Announces Hemp Regulations

By Aaron G. Biros

3 Comments

This morning, U.S. Secretary of Agriculture Sonny Perdue announced the establishment of the U.S. Domestic Hemp Production Program. The program, as stipulated by Congress in the 2018 Farm Bill, will establish a regulatory framework for hemp production in the country.

Secretary Perdue made the announcement in a YouTube video titled “USDA’s Hemp Policy.” Later in the week, an interim final rule formalizing the program will be published in the Federal Register, according to the USDA’s website. “The rule includes provisions for the U.S. Department of Agriculture (USDA) to approve hemp production plans developed by states and Indian tribes including: requirements for maintaining information on the land where hemp is produced; testing the levels of delta-9 tetrahydrocannabinol; disposing of plants not meeting necessary requirements; and licensing requirements,” reads the press release. “It also establishes a federal plan for hemp producers in states or territories of Indian tribes that do not have their own approved hemp production plan.” The interim final rule will go into effect as soon as it is published in the Federal Register, which should be by the end of this week.

You can find a preview of the rule here. The agency has also developed guidelines for sampling and testing procedures, which you can find here. Those documents are meant to provide more information for hemp testing laboratories.

You can watch the YouTube video and read the announcement he made below:

Hello everyone, as I travel across this great country of ours, I hear a lot about a strong interest in a new economic opportunity for America’s farmers: the production of hemp. Which is why today I am pleased to announce the USDA has published the rule establishing the US domestic hemp production program. We said we’d get it done in time for producers to make planning decisions for 2020 and we followed through. We have had teams operating with all hands-on-deck to develop a regulatory framework that meets Congressional intent while seeking to provide a fair, consistent and science-based process for states, tribes, and individual producers who want to participate in this program. As mandated by Congress, our program requires all hemp growers to be licensed and includes testing protocols to ensure that hemp grown under this program is hemp and nothing else. The USDA has also worked to provide licensed growers access to loans and risk management products available for other crops. As the interim final rule, the rule becomes effective immediately upon publication in the federal register. But we still want to hear from you. Help us make sure the regulations meet your needs. That’s why the publication of the interim final rule also includes a public comment period continuing a full and transparent rulemaking process that started with a hemp listening session all the way back in March 2019. At USDA, we are always excited when there are new economic opportunities for our farmers and we hope the ability to grow hemp will pave the way for new products and markets. And I encourage all producers to take the time to fully educate themselves on the processes, requirements and risk that come with any market or product before entering this new frontier. The Agricultural Marketing Service will be providing additional information, resources and educational opportunities on the new program. And I encourage you to visit the USDA hemp website for more information. As always, we thank you for your patience and input during this process.

October 29, 2019

North Coast Analytical & North Coast Testing Accredited to ISO 17025:2017

By Cannabis Industry Journal Staff

No Comments

According to a press release published earlier this month, the American Association for Laboratory Accreditation (A2LA) announced the accreditation of both North Coast Analytical Laboratories and North Coast Testing Laboratories to ISO 17025:2017 for cannabis testing.

Both labs are located in Streetsboro, Ohio, becoming A2LA’s first accredited labs in the state. North Coast Testing does cannabis testing for Ohio’s medical cannabis industry, whereas North Coast Analytical does testing for the hemp industry.

Carolyn Friedrich, Ph.D., scientific director at North Coast Testing, says they are excited to help ensure the safety of patients for Ohio’s medical cannabis program. “We are extremely proud of the work of our entire team in rapidly developing and implementing a comprehensive quality management program that can give all participants in the Ohio Medical Marijuana Control Program confidence in the quality and safety of products tested in our laboratory,” says Friedrich.

Nick Szabo, laboratory director at North Coast Analytical, says A2LA went “above and beyond at every step, we greatly appreciate their efforts. Our accreditation by A2LA is a testament to our ability to meet the most rigorous quality management standards in analytical testing of hemp products, and a vote of confidence in our team’s ability to perform at the highest levels.”

October 29, 2019

Steep Hill Expands to Oklahoma

By Cannabis Industry Journal Staff

No Comments

According to a press release published back in September, Steep Hill announced their expansion to the state of Oklahoma. Steep Hill, a cannabis science company that started with cannabis testing labs in California, has been on an impressive expansion trajectory over the past few years.

In 2016 and 2017, the company expanded into Pennsylvania, Washington D.C., Oregon, Hawaii, among other regions of the country. In May of 2018, they announced a plan to go international, expanding to places like Mexico, Germany, Spain, France, Italy, Switzerland and the United Kingdom via licensing agreements. As recently as March of 2019, Steep Hill announced plans to open a testing lab in New Jersey as well.

Kandice Faulkenberry, co-owner and CEO of Steep Hill Oklahoma, says they hope to raise the bar for cannabis lab testing in Oklahoma. “With Oklahoma being one of the fastest-growing medical markets in the nation, we are excited and honored to be a part of our state’s growth,” says Faulkenberry. “We hope to be a valuable resource in our community and Oklahoma’s cannabis industry. Through our partnership with Steep Hill, the world’s leading cannabis science company, we aim to raise the bar in laboratory services, education, and product safety for the medical cannabis industry in the Sooner State.”

Dr. Chris Orendorff, the other co-owner of Steep Hill Oklahoma, is a family physician based in Sallisaw, Oklahoma. “As a physician, I understand that safety and regulations are critical to patient outcomes and I look forward to providing the same assurance for my patients and fellow Oklahoma residents in the cannabis industry,” says Dr. Orendorff. “I am excited to partner with Steep Hill to provide the highest quality testing in the State of Oklahoma.”