Last week, the Colorado Department of Revenue (DOR), the Colorado Department of Agriculture (CDA) and the Colorado Department of Public Health and Environment (CDPHE) announced a health and safety advisory for a large number of cannabis products grown and produced by Tree of Wellness Inc., doing business as Tree of Wellness. The health and safety advisory, synonymous with a product recall, was issued due to the detection of off-label pesticides in cannabis grown by Tree of Wellness.
Tests found Myclobutanil present in batches going all the way back to May, 2017, with some contaminated batches as recent as late October.
According to the press release, the CDA confirmed the presence of Myclobutanil, a near-ubiquitous fungicide used in a wide range of agricultural practices. The chemical has been a thorn in the side of the cannabis industry for being used off-label, or inappropriately, on cultivating cannabis.
Here are the batch numbers included in the recall
Myclobutanil is the active ingredient in Eagle 20, a pesticide used frequently in other agricultural fields like grapes, apples and spinach. According to UC Davis professor and Steep Hill scientist Dr. Don Land, Myclobutanil becomes significantly more dangerous when heated, or smoked. That chemical reaction produces hydrogen cyanide, an extraordinarily toxic chemical. Because of this, and the lack of research on what happens when these chemicals are burned or heated, there is a growing public concern that cannabis laced with a chemical like Myclobutanil can cause adverse health reactions.
The public health and safety advisory says they detected Myclobutanil in cannabis flower, trim, concentrates, and infused-products from Tree of Wellness. The CDPHE and DOR recommend consumers that have the affected products return them to where they were purchased for proper disposal.
Consumers in Colorado should check their labels to see if their products fall under the recall. Look for the Medical Optional Premises Cultivation License 403-00664 and/or Medical Marijuana Center License 402-00443. The recall includes batches of 23 different strains grown by Tree of Wellness.
As the cannabis marketplace evolves, so does the technology. Cultivators are scaling up their production and commercial-scale operations are focusing more on quality. That greater attention to detail is leading growers, extractors and infused product manufacturers to use analytical chemistry as a quality control tool.
Previously, using analytical instrumentation, like mass spectrometry (MS) or gas chromatography (GC), required experience in the laboratory or with chromatography, a degree in chemistry or a deep understanding of analytical chemistry. This leaves the testing component to those that are competent enough and scientifically capable to use these complex instruments, like laboratory personnel, and that is still the case. As recent as less than two years ago, we began seeing instrument manufacturers making marketing claims that their instrument requires no experience in chromatography.
Instrument manufacturers are now competing in a new market: the instrument designed for quality assurance in the field. These instruments are more compact, lighter and easier to use than their counterparts in the lab. While they are no replacement for an accredited laboratory, manufacturers promise these instruments can give growers an accurate estimate for cannabinoid percentages. Let’s take a look at a few of these instruments designed and marketed for quality assurance in the field, specifically for cannabis producers.
Ellutia GC 200 Series
Shamanics, a cannabis extractor in Amsterdam, uses Ellutia’s 200 series for QA testing
Ellutia is an instrument manufacturer from the UK. They design and produce a range of gas chromatographs, GC accessories, software and consumables, most of which are designed for use in a laboratory. Andrew James, marketing director at Ellutia, says their instrument targeting this segment was originally designed for educational purposes. “The GC is compact in size and lightweight in stature with a full range of detectors,” says James. “This means not only is it portable and easy to access but also easy to use, which is why it was initially intended for the education market.”
Andrew James, marketing director at Ellutia
That original design for use in teaching, James says, is why cannabis producers might find it so user-friendly. “It offers equivalent performance to other GC’s meaning we can easily replace other GC’s performing the same analysis, but our customers can benefit from the lower space requirement, reduced energy bills, service costs and initial capital outlay,” says James. “This ensures the lowest possible cost of ownership, decreasing the cost per analysis and increasing profits on every sample analyzed.”
Shamanics, a cannabis oil extraction company based in Amsterdam, uses Ellutia’s 200 series for quality assurance in their products. According to Bart Roelfsema, co-founder of Shamanics, they have experienced a range of improvements in monitoring quality since they started using the 200 series. “It is very liberating to actually see what you are doing,” says Roelfsema. “If you are a grower, a manufacturer or a seller, it is always reassuring to see what you have and prove or improve on your quality.” Although testing isn’t commonplace in the Netherlands quite yet, the consumer demand is rising for tested products. “We also conduct terpene analysis and cannabinoid acid analysis,” says Roelfsema. “This is a very important aspect of the GC as now it is possible to methylate the sample and test for acids; and the 200 Series is very accurate, which is a huge benefit.” Roelfsema says being able to judge quality product and then relay that information to retail is helping them grow their business and stay ahead of the curve.
908 Devices G908 GC-HPMS
908 Devices, headquartered in Boston, is making a big splash in this new market with their modular G908 GC-HPMS. The company says they are “democratizing chemical analysis by way of mass spectrometry,” with their G908 device. That is a bold claim, but rather appropriate, given that MS used to be reserved strictly for the lab environment. According to Graham Shelver, Ph.D., commercial leader for Applied Markets at 908 Devices Inc., their company is making GC-HPMS readily available to users wanting to test cannabis products, who do not need to be trained analytical chemists.
The G908 device.
Shelver says they have made the hardware modular, letting the user service the device themselves. This, accompanied by simplified software, means you don’t need a Ph.D. to use it. “The “analyzer in a box” design philosophy behind the G908 GC-HPMS and the accompanying JetStream software has been to make using the entire system as straightforward as possible so that routine tasks such as mass axis calibration are reduced to simple single actions and sample injection to results reporting becomes a single button software operation,” says Shelver.
He also says while it is designed for use in the field, laboratories also use it to meet higher-than-usual demand. Both RM3 Labs in Colorado, and ProVerde in Massachusetts, use G908. “RM3’s main goal with the G908 is increased throughput and ProVerde has found it useful in adding an orthogonal and very rapid technique (GC-HPMS) to their suite of cannabis testing instruments,” says Shelver.
Orange Photonics LightLab Cannabis Analyzer
Orange Photonics’ LightLab Cannabis Analyzer
Dylan Wilks, a third generation spectroscopist, launched Orange Photonics with his team to produce analytical tools that are easy to use and can make data accessible where it has been historically absent, such as onsite testing within the cannabis space. According to Stephanie McArdle, president of Orange Photonics, the LightLab Cannabis Analyzer is based on the same principles as HPLC technology, combining liquid chromatography with spectroscopy. Unlike an HPLC however, LightLab is rugged, portable and they claim you do not need to be a chemist to use it.
“LightLab was developed to deliver accurate repeatable results for six primary cannabinoids, D9THC, THC-A, CBD, CBD-A, CBG-A and CBN,” says McArdle. “The sample prep is straightforward: Prepare a homogenous, representative sample, place a measured portion in the provided vial, introduce extraction solvent, input the sample into LightLab and eight minutes later you will have your potency information.” She says their goal is to ensure producers can get lab-grade results.
The hard plastic case is a unique feature of this instrument
McArdle also says the device is designed to test a wide range of samples, allowing growers, processors and infused product manufacturers to use it for quality assurance. “Extracts manufacturers use LightLab to limit loss- they accurately value trim purchases on the spot, they test throughout their extraction process including tests on spent material (raffinate) and of course the final product,” says McArdle. “Edibles manufacturers test the potency of their raw ingredients and check batch dosing. Cultivators use LightLab for strain selection, maturation monitoring, harvesting at peak and tinkering.”
Orange Photonics’ instrument also connects to devices via Wi-Fi and Bluetooth. McArdle says cannabis companies throughout the supply chain use it. “We aren’t trying to replace lab testing, but anyone making a cannabis product is shooting in the dark if they don’t have access to real time data about potency,” says McArdle.
Laboratories throughout the world and in a variety of industries get accredited to demonstrate their competency. In the cannabis industry, some states are beginning to require it and many labs get accredited even if their state doesn’t require it. So what does accreditation mean and why is it so important?
The International Organization for Standardization (ISO) is a standard-setting organization that works to promote industrial and commercial standards. The standards set by ISO are designed to help prove a product’s safety and quality to a certain minimum level.
The ISO/IEC 17025:2005 standard sets specific requirements to demonstrate the competence of a lab for carrying out tests. It essentially shows customers or regulators that a lab has the skills and scientific know-how to perform testing, certifying the lab is capable. Accreditation means certifying a lab to that standard and is synonymous with both quality and competence of an organization.
Michelle Bradac, senior accreditation officer at A2LA
The American Association for Laboratory Accreditation (A2LA), founded in 1978, is a non-profit, internationally recognized accreditation body in the United States that offers laboratory and laboratory-related accreditation services and training. They have worked in the cannabis industry to accredit a number of cannabis laboratories to the ISO/IEC 17025:2005 standard. In this series of articles, we sit down with experts from A2LA to learn more about cannabis lab accreditation, why it’s so important and some of the challenges labs face when seeking accreditation.
In the first part of this series, we sit down with Michelle Bradac, senior accreditation officer at A2LA, to learn the basics. Michelle earned a bachelor’s degree in Biology at Towson State University and then attended Hood College, earning a master’s certificate in Regulatory Compliance in Biomedical Science. She has worked at A2LA for eight years, assisting in the accreditation of food testing, environmental testing and cannabis testing laboratories to ISO/IEC 17025, as well as performing quality system assessments. She also facilitates a number of accreditation programs including Field Sampling Measurement Organizations, STAC (Air Emissions) and Cannabis Testing. Bradac is also a member of the ASTM Cannabis Working Group and the ACIL Cannabis Working Group.
In the next part of this series, we will hear about specific requirements in states, some of the benefits of using ISO/IEC 17025 and the influx of start-up or novice testing laboratories.
CannabisIndustryJournal: What is Laboratory Accreditation?
Michelle Bradac: Laboratory accreditation is a formal means of determining and recognizing the technical competence of laboratories to perform specific types of testing, via the use of an independent third party accreditation body. It provides laboratory users a mechanism to identify and select reliable testing organizations. Use of ISO/IEC 17025 as a basis for laboratory accreditation is internationally recognized as THE conformity assessment standard to which laboratories are accredited; it is used in the USA by both Public (State, local, federal (FDA, USDA, CDC, DoD and EPA) and private laboratories for testing of foods & feeds, drugs, cosmetics, tobacco, natural products and cannabis (among other materials and products).
CIJ: How does laboratory accreditation benefit the cannabis testing laboratory?
Michelle: It provides a framework for continuous improvement and self-correction where the cannabis testing laboratory data management system is independently reviewed and blinded sample Proficiency Testing is encouraged.
CIJ: How does laboratory accreditation benefit the medical cannabis recommending physician?
Michelle: The physician gains a greater degree of assurance that the material provided by the dispensary is what the label says it is. This is especially important in working with patients that are immunocompromised where heavy metals, residual solvents and harmful pesticides could have negative health consequences.
CIJ: How does the testing of medical cannabis by an accredited laboratory benefit the patient?
Michelle: The patient gains increased confidence that the label accurately reflects the potency and chemical properties of the product.
CIJ: What specific challenges does A2LA face in accrediting cannabis testing laboratories?
Michelle: Much of the typical infrastructure is lacking or only now being developed. This ranges from proficiency testing programs, Reference Material Producers, method development and sampling procedures. There is also difficulty in ensuring that laboratories are appropriately validating methods in states where cannabis product is not yet available.
CIJ: Why is A2LA the optimal choice for ensuring the quality and reliability of the results produced by medical marijuana testing laboratories?
Michelle: A2LA has by far the most experience as an accreditor of laboratories that perform testing of natural plant products. We have been performing assessments of and granting accreditation to these types of laboratories for over twenty years. This results in our staff and our assessor corps who are then able to provide valuable insight and technical sophistication that other accreditation bodies do not have. Specific to the cannabis industry, A2LA is also represented in all the major standards development organizations, tradeshows and industry groups; which strengthens our understanding of the industry and ability to assist our customers towards meeting their goal of obtaining accreditation.
In July, we sat down with the folks at Digipath, Inc. when they received their testing license in Nevada for the adult use market. In that conversation, they mentioned they were looking to expand into California.
According to a press release published September 25th, DigiPath, Inc. has entered a joint venture to establish their first cannabis-testing lab in California. They will be working with Don Ashley, an experienced real estate developer and cannabis entrepreneur, to launch Humboldt Botanical, LLC, conducting business under the name “Digipath Botanical Testing”.
Ashley says they expect to be fully operational by Q1 of 2018. “We expect to break ground on this project in the next few weeks and hope to be operational in early Q1 2018 just after the state-wide adult-use market is expected to launch, as we have already obtained approval from the local planning authorities for the entire complex,” says Ashley.
Todd Denkin, founder and president of Digipath
Todd Denkin, president of Digipath, is optimistic for California’s market and the coming regulations. “The state of California is estimated to be the single largest cannabis market in the U.S. Adult-use cannabis legislation was approved by California residents last November, and we expect these new regulations to be implemented in 2018,” says Denkin. “The good news for the industry is that the requirements for cannabis testing will be significant, and we are excited to partner with Don and his team to pursue this opportunity in Humboldt County.”
Ashley is contributing roughly $2 million to build and equip the lab with instrumentation, while Digipath Labs will manage and supervise operations at the lab. According to the press release, Digipath will provide a non-exclusive license to use its intellectual property for the operation of the lab. Digipath Labs will retain rights over all the scientific data generated in the lab.
Cindy Orser, PhD., chief science officer at Digipath
According to Cindy Orser, PhD., chief science officer at Digipath, that data will be put to good use. “Digipath Labs has developed an algorithm for use in strain authentication based largely on terpene profiling from our testing lab in Nevada and we are eager to further test our hypothesis with an expanded dataset from cannabis grown in Northern California,” says Orser.
While testing labs are primarily seen as safeguards for public health and safety, using data to correctly identify strains is a relatively new concept. “Digipath Labs is all about public health and safety through testing for adulterants,” says Orser. “Another component to quality is having confidence in product authenticity at the dispensary level. Not only is the consumer buying quality assured products but truth in advertising when it comes to strain nomenclature.”
Denkin says they were proactive in working toward getting the license early on. “Our partners have been dealing with the local regulators while we have been providing the proper SOP’s for the local government in order to receive the proper licensure in the area,” says Denkin. Taking their experience from Nevada to California, Orser says they have been asked to present to the California Toxicology Association on their experience with cannabis testing in the highly regulated marketplace of Nevada.
The laboratory in Humboldt is going to be part of a “cannabis industrial park,” alongside an R&D facility, oils/concentrate manufacturing center, health and wellness center, distribution and processing facility, tissue culture nursery, hemp clothing outlet, and coffee bistro, according to the press release.
Looking forward to growing their business, Denkin says they hope to launch a lab in Southern California. “We do expect to have a larger footprint in California because of the size of the market and are looking for locations in Southern California as well,” says Denkin. When asked about any new plans to expand elsewhere, Denkin says they’ll let us know. “We are continuing with our business plan and actively seeking the right mergers and acquisitions. Stay tuned.”
Currently, there are no lab testing regulations for Florida’s medical cannabis market. Chris Martinez, co-founder and chief operating officer of EVIO Labs Florida, a veteran-owned business, is looking to change that.
Chris Martinez, co-founder and president of EVIO Labs Florida
When Martinez co-founded EVIO Labs Florida, he saw the need for a dedicated cannabis lab to ensure safety and quality of medicine for patients in the state. Partnering with EVIO Labs to accomplish this goal, Martinez secured a 5,500 sq. ft. facility in Broward County to test for potency, pesticides, microbial contaminants, terpenes, residual solvents and heavy metals. Their lab, a first of its kind in the industry, qualifies as a true pharmaceutical-grade clean room. This week, Martinez also secured their 2nd laboratory location in the City of Gainsville, where they will test for potency, microbials, terpenes and residual solvents. And he isn’t doing it on the cheap. “Our Broward lab is powered by Shimadzu with over $1.2M in the latest testing equipment utilizing LCMS technology with the world’s fastest polarity switching time of 5 m/sec and scan speeds of 30,000 u/sec with UF Qarray sensitivity 90 times that of previously available technologies,” says Martinez.
Martinez, an entrepreneur at heart, started the lab with a team of experts to become the first completely cannabis-focused laboratory in Florida. Jorge Segredo, their head chemist and quality assurance director, has over 18 years of experience in the development of nutraceutical and pharmaceutical products under ISO and FDA accreditation. Segredo has helped launch three independent FDA-accredited laboratories and has extensive knowledge of HPLC, GCMS, LCMS, ICPMS technologies and development/validation of testing methods and procedures. Cynthia Brewer, their director of operations, was an active participant in the 2017 state legislative session and has been an advocate for medical cannabis, working with legislators on a suitable framework to increase patient access to cannabis.
The EVIO team is using instruments from Shimadzu
EVIO is one of the nation’s leaders in cannabis testing, research science and advisory services. It is an evolving network of laboratories with nine EVIO cannabis laboratories operating in five different states: Oregon, Colorado, Massachusetts, Florida and California. “After speaking with industry chemists around the country for months, the EVIO name was constantly brought up in conversation,” says Martinez. “When we spoke with the EVIO Team it was an easy decision for us to partner.” He says Lori Glauser, chief operating officer of EVIO, and William Waldrop, chief executive officer of EVIO, are truly visionaries in the cannabis industry.
According to Martinez, their licensing agreement with EVIO Labs (OTC:SGBYD) marked a first for the publicly traded company with exclusivity in the Florida market. The agreement includes proprietary testing methodologies, operating procedures, training and support.
In addition to testing cannabis for safety and quality, they are launching a technology platform called MJ Buddy, essentially a software tool that takes efficacy feedback from patients and uses testing and genetic data they gather from EVIO Labs across the country. “This will provide real data to the cannabis industry as to the medical benefits for thousands of patients in relation to the genotype and cannabinoid profiles of their medicine,” says Martinez.
Of the states that have legalized some form of cannabis, a large number of them have some lab testing regulations on the book, with some more comprehensive than others. Martinez says he hopes the Florida Department of Health, Office of Medical Marijuana Use follows some of the more thorough state programs, such as Oregon. His team has compiled a set of documents for regulators with recommendations for regulating the lab testing industry.
Without any regulations on paper, it is up to businesses to produce safe and quality medicine, without any oversight. EVIO Labs Florida follows FDA Good Laboratory Practices, has an ISO 17025:2005 accreditation pending, and is working on TNI 2016 accreditation.
When discussing what he wants to see happen with Florida’s regulatory framework, Martinez says the rules need to be specific to Florida. For example, due to the climate being so humid, microbial contaminant testing for things like yeast and mold will be particularly imperative. Because processing methods like butane and alcohol extraction are legal, he emphasizes the need for comprehensive residual solvents testing. “The most important regulation would be to have the laboratories select the samples at the MMTC facility and have the state randomly verify laboratory results to ensure accurate unbiased testing,” says Martinez.
In addition to that, he hopes their pesticide thresholds will be realistic and based on actual science. “We believe the public should receive carcinogenic data for products that are inhaled,” says Martinez. “Chemicals may be introduced into the processing of cannabis to vape liquid that may cause harm. This is important information for public health and communication of the risk related to exposure to such materials.” Martinez says EVIO Labs Florida was founded on the belief that through technology and science we can increase safety and patient outcomes.
Back in April of 2016, the Colorado Legislature passed HB 1436 in an effort to make infused products less appealing to children. On October 1st, 2017, the new law goes into effect, which will prohibit the sale of edibles in the shape of a human, animal or fruit.
The THC universal symbol
Colorado has a history of regulating the market like this, with laws designed to limit the dosing, consistency and appeal of edibles to children. In 2015, regulators placed a 100-milligram cap on THC in infused products, separated into 10-milligram servings. In 2016, regulators began requiring the THC stamp on edibles, a symbol with a clear representation of what the product contains.
Some in the industry are welcoming of these new laws, while others think it might be overregulation. Regardless, manufacturers that have previously produced things like fruit candies or gummy bears now need to update their processes to use non-descript shapes for their products in order to stay compliant.
Bob Eschino, founder and president of Incredibles, an infused product manufacturer in Colorado, says these rules are not very effective at preventing kids from obtaining edibles, but it could help. “I believe consumer protection comes from CRP [child-resistant packaging], proper labeling, education and safe storage,” says Eschino. “CDPHE said themselves that stamping or shaping the products is the least effective way to prevent accidental ingestion. It’s a step that will add to consumer protection in a small way, but every little bit helps for now.” There are a number of more effective measures that regulators in Colorado take to prevent edibles from getting in the hands of children, such as child-resistant packaging, prohibiting advertising of cartoon characters, requiring opaque packaging and warning messages on labels.
Products like infused gummy bears will no longer be permitted for retail; Photo: Tamara S., Flickr
According to Peggy Moore, partner of Love’s Oven, an infused product manufacturer, and board president of the Cannabis Business Alliance, the major change companies need to make to stay compliant is ordering new molds. “Depending on the quantity ordered, molds can cost $10,000 or more to fabricate and produce.,” says Moore. “If a company was not using molds previously there is also training that may be required to orient production staff on technique for making molded confections.” She says there are still plenty of options for manufacturers to use like botanical shapes (a cannabis leaf, for example), circles, squares, rectangles and other shapes.
Her company, Love’s Oven, makes caramels, baked goods, crackers and other non-descript shapes already. “At this point I am not aware of any manufacturers who are not already compliant with this rule in advance,” says Moore. “The most common solution is to move to a square, circle or other shape utilizing molds. “ Moore believes it is a producer’s duty to make products that are not enticing to children. “Regardless of the industry (alcohol, cannabis, pharma) I think we should exercise great caution to not produce products that are targeting children,” says Moore. “While I would love to see manufacturers self-regulate in this regard, clearly some guardrail regulations are needed at this point.”
In addition to the rule on using non-descript shapes, HB 1436 prohibits the use of additives in retail cannabis products that are designed to make it addictive, more appealing to children or misleading consumers. The rule does, however, exclude common baking and cooking ingredients. There is also a stipulation that permits local fire departments to perform annual fire inspections at cannabis cultivation facilities.
Emerald Scientific recently announced their proficiency-testing program, The Emerald Test, has been approved by Colorado as a third party provider for proficiency testing in licensed cannabis laboratories. The Emerald Test, held twice annually, is an inter-laboratory comparison and proficiency test (ILC-PT), allowing data to be collected pertaining to the performance of laboratories on a national scale. Proficiency testing is designed to measure how accurately laboratories perform and is a critical tool for quality assurance.
Colorado requires labs to participate in a proficiency-testing program in order to be certified to conduct required testing on cannabis and cannabis products for safety and quality. According to the press release, Colorado’s Marijuana Enforcement Division, under the Department of Revenue, conducted an evaluation process to determine which applicants could meet the performance standards for regulatory compliance concerning proficiency testing. The contract was awarded to Emerald Scientific following this evaluation process.
According to Ken Groggel, director of the Proficiency Testing Program at Emerald Scientific, a number of states have recognized the need for independent proficiency testing as a required piece of regulatory compliance. “The Emerald Test Inter-Laboratory Comparison/PT is state approved in Washington & Colorado for cannabis testing laboratory licensure,” says Groggel. “States with cannabis or hemp production, as well as labs in other countries are now actively participating in the Emerald Test as a tool for quality improvement, efficiency upgrades and product safety.” He says the Colorado Marijuana Enforcement Division has contracted with Emerald Scientific to provide third party PT programs for microbial contaminants, residual solvents and pesticides.
Ken Groggel, director of the Proficiency Testing Program at Emerald Scientific
Beginning in 2014, The Emerald Test has been offered twice a year and, in 2017, over 50 labs participated from 14 states and 2 countries. “Laboratories that have enrolled more than once have seen significant improvement in their results, an indicator of improved performance for industry customers,” says Groggel.
Proficiency testing is important for ensuring quality, safety and product content accuracy. “This should be the priority whether you are a grower, manufacturer, testing laboratory, regulatory entity, medical patient or adult use consumer,” says Groggel. It also helps labs meet regulatory requirements and achieve ISO 17025 accreditation. “Independent proficiency testing helps determine if the lab is able to deliver the services marketed to its customers,” says Groggel. “Regulatory agencies can use this information when licensing, monitoring & enforcing good science for public safety.”
As new states legalize cannabis and develop consumer protection regulations, proficiency testing programs can help labs demonstrate their commitment to responsible and accurate testing. “When PT results show the cannabis testing lab is capable it is up to the government to ensure accountability for performance on behalf of all its citizens,” says Groggel. Labs can enroll starting on September 25th in the Fall 2017 Emerald Test ILC/PT.
The Massachusetts Recreational Consumer Council (MRCC) is an interesting nonprofit that recently launched an educational campaign, called Consume Responsibly Massachusetts. For many cannabis advocates who watched their states legalize the drug, consumer education is a very important part of moving forward. As states across the East Coast implement regulatory frameworks for the cannabis industry, there is a sense of urgency to make sure the rules are right the first time, and that cannabis businesses become responsible stewards of their new market.
In the wake of pesticide recalls in the west and related public health concerns, the issues surrounding consumer safety and how states protect that are now front and center. “The purpose of Consume Responsibly Massachusetts is to keep adult-consumers informed of their rights in the state,” says Jefferson. “It’s also an ongoing effort to bring consumers into the world of cannabis politics and science.”
The MRCC’s mission is to help protect the safety of recreational cannabis consumers by bridging the information gap between businesses, legislators and communities. “We work at the state and local level advocating for sensible recreational marijuana policy and regulations,” reads a press release. According to Kamani Jefferson, president of the MRCC, bridging that gap requires a lot of community engagement. “I was a field organizer on the Campaign to Tax and Regulate Marijuana here in Massachusetts so this is extremely important to me,” says Jefferson. “MRCC participated in this year’s Cambridge 5K Freedom Run.” He says getting out in the community like this is one of many ways to help provide educational opportunities, help promote local cannabis businesses and get rid of the “lazy stoner stigma.”
Kamani Jefferson, president of the MRCC
For the MRCC, the issue of craft cannabis is a significant part of the organization’s philosophy, in addition to product safety and others. “Craft Cannabis will benefit the consumer in an entirely new way,” says Jefferson. “Members of the community will have a chance to provide products and directly affect the economy.” Because local owners tend to be more involved in their towns, Jefferson says residents will get to make more of an impact than nonlocal owners. And he’s right- small, local businesses contribute substantially more to local economies and communities than large companies. Between 1993 and 2013, small businesses created roughly 63% of all new jobs in the United States. With the new cannabis market comes a promising opportunity for local economies.
“The Massachusetts cannabis industry is developing and growing fast,” says Jefferson. “Aside from the medical marijuana production sites, the new recreational marijuana law grants production participation in the regulated recreational marijuana industry to farmers, in the form of craft marijuana cultivator cooperative systems.” While he thinks this is a good opportunity for small businesses and communities alike to gain a foothold in the market, Jefferson is hesitant to endorse Massachusetts’ regulatory policies. “A lack of regulatory oversight from the CCC [Cannabis Control Commission] places the cannabis industry in a vulnerable position,” says Jefferson. “If we want clear, consistent standards for clean and safe products prioritized, then we need consistent testing data.” Jefferson is arguing for more regulatory oversight for safety issues, such as contaminant testing. This is one of a handful of issues they are pressing for sensible cannabis policy in Massachusetts.
Here are some of the issues they support:
Local Cannabis: Equitable licensing for small and medium sized local businesses from members of the community.
Quality Control: Access to a variety of clean and safe cannabis products in retail dispensaries, tested for harmful contaminants, mold, pesticides and fungicides.
Responsible + Safe Consumption: Access to educational materials about proper dosage, methods of ingestion, quality analysis, understanding product labels and general cannabis information.
High Potency Flowers, Edibles, & Concentrates: Access, non-restriction to high potency marijuana products of all forms.
Home Grow: Ability to grow at least 6 plants per person, 12 per household as stated in Question 4.
Social Use: The ability to consume in designated establishments outside of the household.
Expungement: Sentence commutation and record expungement for convictions involving non-violent marijuana charges that are now legal.
Research: University supported biological, behavioral and cognitive marijuana research to further our understanding and capabilities of the cannabis plant.
Demand for cannabis extracts, in particular vaping products, is at an all-time high. People want good oil, and they want to know something about the quality of it. It is therefore time to take a step back and consider the process from plant to cartridge. What is the current industry standard for cannabis extraction, what constitutes quality and where might we need to make some adjustments?
Right now, “clear” oil is hot. Customers have been led to believe that a pale gold extract is synonymous with the best possible cannabis concentrate, which is not necessarily the case. Producing a 95% pure THC extract with a translucent appearance is neither a great scientific feat nor a good representation of the whole cannabis flower. Moreover, it runs counter to the current trend of all-natural, non-processed foods and wellness products.
“My carrots are organic and fresh from the farmers market, my drink has no artificial sweeteners and my honey is raw, but my cannabis oil has undergone a dozen steps to look clear and still contains butane.”Cannabis is a fascinating plant. It is the basis of our livelihood, but more importantly, it enhances the quality of life for patients. The cannabis plant offers a plethora of medicinally interesting compounds. THC, CBD and terpenes are the most popular, but there are so many more. As of the most recent count, there are 146 known cannabinoids1. Cannabinoids are a group of structurally similar molecules2, including THC and CBD, many of which have shown biological activity3.
Then there are terpenes. These are the smaller molecules that give cannabis its distinct smell and flavor, over 200 of which have been identified in cannabis4. But wait, there’s more. The cannabis plant also produces countless other metabolites: flavonoids, alkaloids, phenols and amides5. All these components mixed together give the often-cited entourage effect6,7.
Current industry standards for cannabis oil extraction and purification stand in marked contrast to the complexity of the plant’s components. Due to an unsophisticated understanding of the extraction process and its underlying chemistry, cannabis oil manufacturers frequently produce oil of low quality with high levels of contamination. This necessitates further purifications and clean up steps that remove such contaminants unfortunately along with beneficial minor plant compounds. If one purifies an extract to a clear THC oil, one cannot also offer the full spectrum of cannabinoids, terpenes and other components. Additionally, claiming purities around 95% THC and being proud of it, makes any self-respecting organic chemist cringe8.
Precise control of extraction conditions leads to variable, customized concentrates. THC-A crumble, terpene-rich vape oil, THC sap (from left to right).
The labor-intensive, multi-step extraction process is also contrary to “the clean-label food trend”, which “has gone fully mainstream”9. Exposing the cannabis flower and oil to at least half a dozen processing steps violates consumer’s desire for clean medicine. Furthermore, the current practice of calling supercritical-CO2-extracted oils solvent-less violates basic scientific principles. Firstly, CO2 is used as a solvent, and secondly, if ethanol is used to winterize10, this would introduce another solvent to the cannabis oil.
We should reconsider our current extraction practices. We can offer cannabis extracts that are free of harmful solvents and pesticides, give a better, if not full, representation of the cannabis plant and meet the patients’ desire for clean medicine. Realizing extracts as the growth-driver they are11 will make us use better, fresher starting materials12. Understanding the underlying science and learning about the extraction processes will allow us to fine-tune the process to the point that we target extract customized cannabis concentrates13. Those, in turn, will not require additional multi-step purification processes, that destroys the basis of the entourage effect.
The cannabis industry needs to invest and educate. Better extracts are the result of knowledgeable, skilled people using precise instruments. Backroom extraction with a PVC pipe and a lighter should be horror stories of the past. And only when the patient knows how their medicine is made can they make educated choices. Through knowledge, patients will understand why quality has its price.
In short, over-processing to make clear oil violates both the plant’s complexity and consumers’ desires. Let us strive for pure extracts, not clear. Our patients deserve it.
[1] Prof. Meiri; lecture at MedCann 2017
[2] ElSohly, Slade, Life Sciences2005, 539
[3] Whiting, et. al.,JAMA.2015, 2456
[4] Andre, Hausman, Guerriero, Frontiers in Plant Science2016, 19
The demand for medical cannabis in Florida might be growing steadily, with patient numbers soaring, but that doesn’t mean the market will grow accordingly. Due to hampering regulations and a lack of state guidance, the industry in Florida is tiny and patients have limited options for medical cannabis products.
A little more than three years ago, Governor Rick Scott signed a bill into law, legalizing medical cannabis, but only for terminally ill patients and only for one strain, Charlotte’s Web. That stipulated a low-THC, concentrated oil form of cannabis. That bill also set up the licensing framework for what is now an extremely limited market.
Florida Gov. Rick Scott has been accused of making the licensing process secretive Photo: Gage Skidmore, Flickr
In November of 2015, the Office of Compassionate Use, now called the Office of Medical Marijuana, issued licenses for five dispensaries. To get a license, applicants needed to meet a variety of absurd requirements. That included being a nursery in business for thirty years, growing a minimum of 400,000 plants at the time of applying, paying $300,000 in fees and a $5 million performance bond.
Fast forward to Election Day last year when voters passed Amendment 2 by a wide margin, amending the state’s constitution and legalizing medical cannabis for a broader scope of qualifying conditions. What hasn’t changed, however, is the old vertical licensing framework. Critics have dubbed this a “pay-to-play” market, with massive barriers to entry prohibiting small businesses from gaining market access.
David C. Kotler, Esq.
David Kotler, Esq., attorney and partner at CohenKotler P.A., says we shouldn’t expect to see a viable market for years as a result of all this red tape. “Honestly the State of Florida, with their limited licenses and odd requirements to qualify for licensure have stunted what could be a good market both for businesses and patients,” says Kotler. “It has been an inefficient roll-out and is truly an embarrassment for the state, legislature and the Department of Health.” Kotler says he’s heard reports of extremely limited product selection, poor quality, as well as no dried flower being offered.
But the patients are pouring in by the thousands- on July 27th, the Office of Medical Marijuana reported 26,968 registered medical patients, with more than 10,000 patients signing up since June 7th. “Despite my belief that it would be a slow roll out, it appears the patient count is picking up,” says Kotler. “The elimination of the 90-day doctor-patient relationship will certainly help this.” He is referring to the reversal of a waiting period policy, where patients had to wait 90 days before receiving a medical cannabis certification. “But there still seems to be a backup with issuance of cards and poor guidance from the Department of Health leaving many doctors unsure of what they should be doing,” says Kotler. The rules and guidelines for physicians participating in the program are still not established, but the Florida Board of Medicine expects to vote on them this week, reports say.
Matt Karnes, founder and managing partner of GreenWave Advisors
With seven licensees right now and a total of ten licensees by October allowed to grow and distribute cannabis products, the question remains if that is enough to satisfy the growing number of patients. According to Matt Karnes, founder and managing partner of GreenWave Advisors, the state is adjusting by adding more licensees and allowing them to operate more dispensaries, potentially trying to sate that demand. “Both of these amendments will likely serve as a catalyst for revenue growth but could be tempered by a lack of physician participation (as we have seen in other states) in the medical marijuana program,” says Karnes. “For every incremental 100,000 patients who register in the Medical Marijuana program, four more licenses will be issued and existing licensees will be allowed to open another four dispensaries (current cap is 25). We do not expect an incremental 100,000 patients until sometime in 2021.” His firm’s market projections account for those increases and edibles now being sold, but still no dry flower allowed. They project total sales figures in the state to reach $712 million by 2021.
Those figures are contingent on the increase in registered patients and more licensees. If Florida’s vertical licensing model remains, it’s quite possible the state will see a cannabis shortage, much like Nevada during their opening month of adult use sales. “Instead of learning from so many states before it, Florida forged a path down the rabbit hole that may limit Florida’s potential until either a legislative change or a backlash at the polls in the form of an amendment bringing forth adult use,” says Kotler. In New York, that vertical licensing model arguably created a monopoly, with only a select few businesses controlling the entire market. That doesn’t foster market growth; it hurts quality, keeps prices high and prevents real competition. “We see how that worked out for New York,” says Kotler. “We cling to that despite what could be a large patient base with the potential to service tourists who wish to have reciprocity.”
Florida’s market could be a powerhouse for the state, with the potential to generate millions in tax revenue, create thousands of jobs and actually help patients get the medicine they need. But until the state ditches their conservative, closed-door approach, we won’t see the industry truly flourish. .
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
