Tag Archives: regulation

Marguerite Arnold

Carry On Cannabis: UK Parliament Debates Reform (Again)

By Marguerite Arnold
2 Comments
Marguerite Arnold

The British Parliament considered a new right last Friday – the right of chronically ill patients to treat their conditions with cannabinoids. The bill to reform the law and allow medical use, the Legalisation of Cannabis (Medicinal Purposes) Bill 2017-19 was also re-read. It was first introduced last October.

While reformers at this point are loath to do any more than publicly hope, events in the UK continue to unfold in favour of reform.

This time, it is in the wake of a highly upsetting and embarrassing incident that further highlights the human toll of prohibition. When the British Home Office (a combination of the State Department, Homeland Security and a few other federal U.S. agencies) refuses cannabis oil to six year-old Britons with epilepsy named Alfie, don’t expect the famed stiff upper lip in response.

Not anymore.Why on earth would a home-grown company deny treatment to a British kid with epilepsy? 

Especially not when the rest of the EU is moving forward, Canada and Australia (both countries are a part of the British Commonwealth) are now firmly in the medical camp with Canada moving ahead with recreational use this summer. Not to mention continuing reform on both fronts in many U.S. states. Even with setbacks that include the Trump White House and Justice Department (the recently dismissed federal case in New York being just the latest casualty), recreational reform in California is an international beacon of change that will not go quietly into the night. Not now.

One of the more interesting aspects of the Dingley case in the UK, in sharp contrast, is how fast Parliament responded to the plight of the six-year-old and his mother. Not only has Dingley’s medical import license been reconsidered in Parliament, but the matter appears to have finally galvanized significant numbers of the British elected class to do something about an appalling situation that affects hundreds of thousands, if not millions of Brits too.

Cannabis Medical Refugees

Medical refugee policy, especially around cannabinoids, is at least as controversial as the other kind. In Europe and the rest of the world, just like cannabis reform itself, these are national, not state issues as they have been in the U.S., (where the issue of cannabis patient state “refugees” has nonetheless been an issue for most of this decade).

Outside of the U.S., however, it is still the case that national governments can be embarrassed into reform with the right case (or groups of them).

epidiolex
GW Pharma said their product Epidiolex (for the treatment of childhood epilepsy) is being considered by the European Medicines Agency

That was certainly true in Israel in 2014, when the so-called “15 Families” threatened to emigrate from Israel to Colorado unless the government allowed them to treat their sick kids (federal government policy was changed within a month). Not to mention an internal, state to state migration of families in the United States to Colorado around the same time.

It may also be true in this latest British case. The Home Office has been embroiled in a few embarrassing take backs of late, mostly on the topic of immigration of people. The Alfie-Dingley cannabis case hits both medical cannabis reform and lingering buyer’s remorse over Brexit where the British people actually live (and on topics they actually care about).

Refusing at least medical cannabis rights in the UK might also well tip the scales in favour of a redo on Brexit. Or at least capture the support of people who still dream of that possibility. While the UK is still part of the continent, British citizens also have the right to travel freely, with medical rights intact, to other countries and get treatment. The British are no strangers to this idea (in fact, many British retirees end up in Spain and Greece for precisely this reason). Add cannabis to the mix, and current British policy looks even more out of step with reality and the wishes of the British people. Even the older, more conservative and “middle class” (read: American working if not blue-collar class) ones.

Local Production and Prohibition

And then of course, there is this irony. GW Pharmaceuticals, one of the oldest, cannabis companies in the world, is located in the UK. It even grows its own crops there, and has a special license from the British government to do so.

Worse, in this particular situation, it also is busy bringing several cannabinoid-based anti-epileptic drugs (for children and adults) to the market.GW logo

Why on earth would a home-grown company deny treatment to a British kid with epilepsy? And how could a government grant a license to a company to develop the plant for profit, but not a child who desperately needs the drug to live?

In a move that seems more than coincidence, GW Pharma also reported this week that their product Epidiolex (for the treatment of childhood epilepsy) is being considered by the European Medicines Agency, while a separate drug also bound for the epilepsy market called GWP42006 had just failed a Phase IIa trial for focal seizures.

The business press of course, has mostly reported that the only impact of this development so far of course, is that the company took a hit on share price.

It might do a bit more than that. Starting with legislative reform and ending with the sparking of significant home-grown (and legal) competition.

The combined impact of a failed trial in Eastern Europe by the only British company licensed and qualified to produce medicinal cannabinoids for any reason, and the plight of a British boy at home who needs precisely this kind of drug (and has so far been denied it), might in fact be the tinder match that lights political and market reform if not the development of a cannabis industry (finally) in Great Britain.

If this doesn’t, probably nothing will.

KenSnoke

Emerald Conference Showcases Research, Innovation in Cannabis

By Aaron G. Biros
No Comments
KenSnoke

Last week, the 4th annual Emerald Conference brought attendees from around the world to San Diego for two days of education, networking and collaboration. Leading experts from across the industry shared some of the latest research in sessions and posters with over 600 attendees. The foremost companies in cannabis testing, research and extraction brought their teams to exhibit and share cutting edge technology solutions.

KenSnoke
Ken Snoke, president of Emerald Scientific, delivers the opening remarks

The diversity in research topics was immense. Speakers touched on all of the latest research trends, including tissue culture as a micropropagation technique, phenotype hunting, pharmaceutical product formulation, chromatography methods and manufacturing standards, to name a few.

On the first day of the event, Ken Snoke, president of Emerald Scientific, gave his opening remarks, highlighting the importance of data-driven decisions in our industry, and how those decisions provide the framework and foundation for sound progress. “But data also fuels discovery,” says Snoke, discussing his remarks from the event. “I told a story of my own experience in San Diego almost 30 years ago while working in biotech, and how data analysis in a relatively mundane and routine screening program led to discovery. And how we (the folks at Emerald) believe that when we get our attendees together, that the networking and science/data that comes from this conference will not only support data-driven decisions for the foundation of the industry, but it will also lead to discovery. And that’s why we do this,” Snoke added.

Postersession
Arun Apte, CEO of CloudLIMS, discusses his poster with an attendee

Snoke says the quality of the content at the poster session was phenomenal and engaging. “We had over 500 attendees so we continue to grow, but it’s not just about growth for us,” says Snoke. “It’s about the quality of the content, and providing a forum for networking around that content. I met a scientist that said this conference renewed his faith in our industry. So I firmly believe that the event has and will continue to have a profound and immensely positive impact on our industry.”

Introducing speakers as one of the chairs for first session focused on production, Dr. Markus Roggen says he found a number of speakers delivered fascinating talks. “This year’s lineup of presentations and posters really showcase how far the cannabis industry has come along,” says Dr. Roggen. “The presentations by Roger Little, PhD and Monica Vialpando, PhD, both showed how basic research and the transfer of knowledge from other industries can push cannabis science forward. Dr. Brian Rohrback’s presentation on the use of chemometrics in the production of pharmaceutical cannabis formulations was particular inspiring.”

RogerLittle
Roger Little, Ph.D., owner of CTA, LLC, presents his research

Shortly after Snoke gave his opening remarks, Dr. Roggen introduced the first speaker, Roger Little, Ph.D., owner of CTA, LLC. He presented his research findings on phenotype hunting and breeding with the help of a cannabis-testing laboratory. He discussed his experience working with local breeders and growers in Northern California to identify high-potency plants early in their growth. “You can effectively screen juvenile plants to predict THC potency at harvest,” says Dr. Little. The other research he discussed included some interesting findings on the role of Methyl jasmonate as an immune-response trigger. “I was looking at terpenes in other plants and there is this chemical called methyl jasmonate,” says Dr. Little. “It is produced in large numbers of other plants and is an immune response stimulator. This is produced from anything trying to harm the plant such as a yeast infection or mites biting the stem.” Dr. Little says that the terpene has been used on strawberries to increase vitamin C content and on tobacco plants to increase nicotine content, among other uses. “It is a very potent and ubiquitous molecule,” says Dr. Little. “Cannabis plants’ immune-response is protecting the seeds with cannabinoid production. We can trick plants to think they are infected and thus produce more cannabinoids, stimulating them to produce their own jasmonate.”

Dr. Hope Jones, chief scientific officer of C4 Laboratories, spoke about tissue culture as an effective micropropagation technique, providing attendees with a basic understanding of the science behind it, and giving some estimates for how it could effectively replace cloning and the use of mother plants. You could overhear attendees discussing her talk throughout the remainder of the show.

HopeJones
Dr. Hope Jones, chief scientific officer at C4 Laboratories, discusses tissue culture during her talk

Dr. Jones has worked with CIJ on a series of articles to help explain cannabis tissue culture, which you can find here. “In this example, we started with one vessel with 4 explants,” says Dr. Jones. “Which when subcultured 4-6 weeks later, we now have 4 vessels with 16 plants.” She says this is instrumental in understanding how tissue culture micropropagation can help growers scale without the need for a ton of space and maintenance. From a single explant, you can potentially generate 70,000 plants after 48 weeks, according to Dr. Jones.

Those topics were just the first two of many presentations at Emerald Conference. You can take a look at some of the other presentation abstracts in the agenda here. The 5th Annual Emerald Conference in 2019 will be held February 28th through March 1st in San Diego next year.

Swetha Kaul, PhD

An Insider’s View: How Labs Conduct Cannabis Mold Testing

By Swetha Kaul, PhD
2 Comments
Swetha Kaul, PhD

As both recreational and medical cannabis legalization continues to progress across the country, each state is tasked with developing regulatory requirements to ensure that customers and patients receive clean cannabis for consumption. This requires cannabis to undergo laboratory testing that analyzes the presence of microbial impurities including yeast and mold.

Some states, such as Colorado, Nevada, Maine, Illinois and Massachusetts use total yeast and mold count testing (TYMC) and set a maximum yeast and mold count threshold that cultivators must fall below. Other states, such as California, require the detection of species-specific strains of Aspergillus mold (A. fumigatus, A. flavus, A. niger and A. terreus), which requires analyzing the DNA of a cannabis sample through polymerase chain reaction testing, also known as PCR.

Differences in state regulations can lead to different microbiological techniques implemented for testing.Before diving in further, it is important to understand the scientific approach. Laboratory testing requirements for cannabis can be separated into two categories: analytical chemistry methods and microbiological methods.

Analytical chemistry is the science of qualitatively and quantitatively determining the chemical components of a substance, and usually consists of some kind of separation followed by detection. Analytical methods are used to uncover the potency of cannabis, analyze the terpene profile and to detect the presence of pesticides, chemical residues, residuals solvents, heavy metals and mycotoxins. Analytical testing methods are performed first before proceeding to microbiological methods.

Petri dish containing the fungus Aspergillus flavus
Petri dish containing the fungus Aspergillus flavus. It produces carcinogenic aflatoxins, which can contaminate certain foods and cause aspergillosis, an invasive fungal disease.
Photo courtesy of USDA ARS & Peggy Greb.

Microbiological methods dive deeper into cannabis at a cellular level to uncover microbial impurities such as yeast, mold and bacteria. The techniques utilized in microbiological methods are very different from traditional analytical chemistry methods in both the way they are performed and target of the analysis. Differences in state regulations can lead to different microbiological techniques implemented for testing. There are a variety of cell and molecular biology techniques that can be used for detecting microbial impurities, but most can be separated into two categories:

  1. Methods to determine total microbial cell numbers, which typically utilizes cell culture, which involves growing cells in favorable conditions and plating, spreading the sample evenly in a container like a petri dish. The total yeast and mold count (TYMC) test follows this method.
  2. Molecular methods intended to detect specific species of mold, such as harmful aspergillus mold strains, which typically involves testing for the presence of unique DNA sequences such as Polymerase Chain Reaction (PCR).


Among states that have legalized some form of cannabis use and put forth regulations, there appears to be a broad consensus that the laboratories should test for potency (cannabinoids concentration), pesticides (or chemical residues) and residual solvents at a minimum. On the other hand, microbial testing requirements, particularly for mold, appear to vary greatly from state to state. Oregon requires random testing for mold and mildew without any details on test type. In Colorado, Nevada, Maine, Illinois and Massachusetts, regulations explicitly state the use of TYMC for the detection of mold. In California, the recently released emergency regulations require testing for specific species of
Aspergillus mold (A. fumigatus, A. flavus, A. niger and A. terreus), which are difficult to differentiate on a plate and would require a DNA-based approach. Since there are differences in costs associated and data produced by these methods, this issue will impact product costs for cultivators, which will affect cannabis prices for consumers.

 

French flags blowing in the wind in Le Havre

France Considers Fining Cannabis Possession

By Marguerite Arnold
No Comments
French flags blowing in the wind in Le Havre

The French have always been known for possessing a certain national savoire faire. In English, that translates to a phrase meaning innate understanding of how to do things with a certain amount of panache, if not bonhomie. International diplomacy was long conducted in French as a result.

However, when it comes to the famed French silver tongue or sophistication on the cannabis issue, and well, not so much. As is widely acknowledged, even by the French, the country is stuck in the Dark Ages when it comes to cannabis. Almost literally. Including having the strictest and harshest penalties for possession anywhere in Europe. Such penalties do not include a stint in the Bastille. But they can involve prison time, and they are ridiculously harsh. Quelle Horreure! Not mention, Vive la Revolution!

Nobody has said (yet) “Let them eat spice cake.” But France is now clearly an outlier in a continent moving towards cannabis reform of (at least) the medical and decriminalized kind.The most recent statistics suggest that 17 million French people have tried cannabis.

And herein lies the French paradox. Despite the highest per capita usage of any European country, French cannabis consumers have not turned into effective advocates on the political front.

Why not?

How High Are The French?

The most recent statistics suggest that 17 million French people have tried cannabis. 1.4 million use it regularly, about half of those on a daily basis. And here is the exciting (read: terrifying part). Users (not dealers) face up to a year in prison on the first offense, plus a fine of 3,750 euros (about $4,000).

Mon Dieu! Who on earth do the French think they are? A southern American state? One that probably actually banned “French” fries during a dull day at the state ‘lege when politically inspired to do so a few years back?

But even that epithet doesn’t cut it anymore in an environment where Florida is getting in on the action, and the first medical dispensary just opened in Texas.

French flags blowing in the wind in Le Havre
Image: Richard Akerman, Flickr

It is also not like the French big wigs also do not know they are out of step. France’s boyish president, now in office for about a year, Emmanuel Macron, promised decriminalization by the end of 2017 (it didn’t happen). Now a new parliamentary report, released, fittingly on Valentine’s Day, recommends swapping out the current draconian punishments for a fixed fine of between 150-200 euros ($250) per offense. The report also specifically concludes that current legislation is not working.

In 2015, there were 64,000 drug related convictions in France. 40,000 were for use, not dealing. While just over 3,000 of those convicted actually served a prison sentence, even the more conservative aspects of French society have had enough.

Like Germany recently, where the head of the country’s largest police union came out last week for decriminalization, the French police do not want to continue a charade that results in more paperwork for them, rather than a real shift in policy with concrete results. And now, neither do its politicians.

don’t expect this current diplomatic impass to hold for long, even if it gains enough traction to get passed into federal law.In an environment where political gridlock is the name of the game, however, it is very clear that cannabis is just one more issue dropped into a toxic mix that also includes topics like “what’s up in the EU.” Not to mention the nascent separatist and populist sentiments of neighbours like Spain and Germany. Countries, ironically, also far ahead of France on the cannabis front.

The hope of French activists on the ground is that cannabis is actually caught on the right side of history now. Even if, finally, it is changing the law to decriminalize the drug and only penalize patients (and others) with a ticket.

That too, is unlikely to succeed, as many such experiments elsewhere have failed before. That said, it is clearly a step in the right direction and an inevitable one at that.

Caught in the Middle

The great irony of this of course, is what is happening as France becomes an unwilling partner in the cross-border cannabis ménage-a-trois now afoot thanks to changing medical cannabis laws elsewhere in the EU. Namely, cannabis may remain off the reform agenda to parliamentarians and out of reach to the average French patient. That said, cross-continental transport of the drug will inevitably create a situation where a significant amount of cannabis products consumed by medical users elsewhere in the EU is trucked and or trained across France while out of reach to the locals.

Portugal and Spain are shaping up to be low-cost producers to the West. On the East, Germany, Switzerland and increasing numbers of Eastern European countries are looking for cheap product. That means there is going to be a great deal of medical grade cannabis crossing the continent by way of French territory. There is already a trickle. It is about to become a flood. What happens to reform in a country clearly caught in the middle?

As a result, don’t expect this current diplomatic impass to hold for long, even if it gains enough traction to get passed into federal law.

French cannabis policy is far from a la mode. Even to its own citizens. And on this issue, for sure, absolutely old fashioned in the most un-French way possible.

HACCP

Hazard Analysis and Critical Control Points (HACCP) for the Cannabis Industry: Part 1

By Kathy Knutson, Ph.D.
1 Comment
HACCP

Hazard Analysis and Critical Control Points (HACCP) Defined

Farm-to-fork is a concept to describe the control of food safety starting in the fields of a farm and ending with deliciousness in my mouth. The more that is optimized at every step, the more food safety and quality are realized. Farm-to-fork is not a concept reserved for foodies or “eat local” food campaigns and applies to all scales of food manufacture. HACCP is like putting the last piece of a huge puzzle in the middle and seeing the whole picture develop. HACCP is a program to control food safety at the step of food processing. In states where cannabis is legal, the state department of public health or state department of agriculture may require food manufacturers to have a HACCP plan. The HACCP plan is a written document identifying food safety hazards and how those hazards are controlled by the manufacturer. While there are many resources available for writing a HACCP plan, like solving that puzzle, it is a do-it-yourself project. You can’t use someone else’s “puzzle,” and you can’t put the box on a shelf and say you have a “puzzle.”

HACCP is pronounced “ha” as in “hat” plus “sip.”

(Say it aloud.)

3-2-1 We have liftoff.

The history of HACCP starts not with Adam eating in the garden of Eden but with the development of manned missions to the moon, the race to space in the 1950s. Sorry to be gross, but imagine an astronaut with vomiting and diarrhea as a result of foodborne illness. In the 1950s, the food industry relied on finished product testing to determine safety. Testing is destructive of product, and there is no amount of finished product testing that will determine food is safe enough for astronauts. Instead, the food industry built safety into the process. Temperature was monitored and recorded. Acidity measured by pH is an easy test. Rather than waiting to test the finished product in its sealed package, the food industry writes specifications for ingredients, ensures equipment is clean and sanitized, and monitors processing and packaging. HACCP was born first for astronauts and now for everyone.HACCP

HACCP is not the only food safety program.

If you are just learning about HACCP, it is a great place to start! There is a big world of food safety programs. HACCP is required by the United States Department of Agriculture for meat processors. The Food and Drug Administration (FDA) requires HACCP for seafood processing and 100% juice manufacture. For all foods beyond meat, seafood and juice, FDA has the Food Safety Modernization Act (FSMA) to enforce food safety. FSMA was signed in 2011 and became enforceable for companies with more than 500 employees in September of 2016; all food companies are under enforcement in September 2018. FSMA requires all food companies with an annual revenue greater than $1 million to follow a written food safety plan. Both FDA inspectors and industry professionals are working to meet the requirements of FSMA. There are also national and international guidelines for food safety with elements of HACCP which do not carry the letter of law.

The first step in HACCP is a hazard analysis.

Traditionally HACCP has focused on processing and packaging. Your organization may call that manufacturing or operations. In a large facility there is metering of ingredients by weight or volume and mixing. A recipe or batch sheet is followed. Most, but not all, products have a kill step where high heat is applied through roasting, baking, frying or canning. The food is sealed in packaging, labeled, boxed and heads out for distribution. For your hazard analysis, you identify the potential hazards that could cause injury or illness, if not controlled during processing. Think about all the potential hazards:

  • Biological: What pathogens are you killing in the kill step? What pathogens could get in to the product before packaging is sealed?
  • Chemical: Pesticides, industrial chemicals, mycotoxins and allergens are concerns.
  • Physical: Evaluate the potential for choking hazards and glass, wood, hard plastic and metal.

The hazards analysis drives everything you do for food safety.

I cannot emphasize too much the importance of the hazard analysis. Every food safety decision is grounded in the hazard analysis. Procedures will be developed and capital will be purchased based on the hazard analysis and control of food safety in your product. There is no one form for the completion of a hazard analysis.

HACCP risk matrix
A risk severity matrix. Many HACCP training programs have these.

So where do you start? Create a flow diagram naming all the steps in processing and packaging. If your flow diagram starts with Receiving of ingredients, then the next step is Storage of ingredients; include packaging with Receiving and Storage. From Storage, ingredients and packaging are gathered for a batch. Draw out the processing steps in order and through to Packaging. After Packaging, there is finished product Storage and Distribution. Remember HACCP focuses on the processing and packaging steps. It is not necessary to detail each step on the flow diagram, just name the step, e.g. Mixing, Filling, Baking, etc. Other supporting documents have the details of each step.

For every step on the flow diagram, identify hazards.

Transfer the name of the step to the hazard analysis form of your choice. Focus on one step at a time. Identify biological, chemical and physical hazards, if any, at that step. The next part is tricky. For each hazard identified, determine the probability of the hazard occurring and severity of illness or injury. Some hazards are easy like allergens. If you have an ingredient that contains an allergen, the probability is high. Because people can die from ingestion of allergens when allergic, the severity is high. Allergens are a hazard you must control. What about pesticides? What is the probability and severity? I can hear you say that you are going to control pesticides through your purchasing agreements. Great! Pesticides are still a hazard to identify in your hazard analysis. What you do about the hazard is up to you.

OLCC-Logo

Audit Finds Oregon Lacking Regulatory Oversight and Proper Security

By Aaron G. Biros
No Comments
OLCC-Logo

Last week, Oregon Secretary of State Dennis Richardson published his office’s audit of The Oregon Liquor Control Commission (OLCC). The audit uncovered a number of inadequacies with the regulatory agency, most notably the problems with their tracking system, designed to prevent cannabis form being sold on the black market.

The report highlights the need for Oregon to implement a more robust tracking system, citing reliance on self-reporting, overall poor data quality and allowing untracked inventory for newly licensed businesses. The audit also found an insufficient number of inspectors and unresolved security issues. According to The Oregonian, the OLCC only has 18 inspectors, roughly one for every 83 licensed businesses.

Auditors also found inadequacies in the application system, saying the OLCC doesn’t monitor third-party service providers and doesn’t have a process in place for reconciling data between the licensing and tracking systems. The audit found there is a risk that decisions made for the program could be based on unreliable data. It also found a risk of unauthorized access to the systems, due to a lack of managing user accounts.

Oregon Secretary of State Dennis Richardson
Oregon Secretary of State Dennis Richardson

This audit’s publication is very timely. Most notably because U.S. Attorney Billy Williams, who called Oregon’s black market problem “formidable,” convened a summit this week to examine how Oregon can prevent cannabis being exported to other states. According to the Oregonian, Williams said Oregon has an “identifiable and formidable overproduction and diversion problem.” The audit’s findings highlighting security issues are also very timely, given that in the same week, Oregon’s neighbor to the North, Washington, experienced a security breach in its own tracking system.

The problems with the Oregon tracking system’s security features are numerous, the audit says. They found that the OLCC lacks a good security plan, IT assets aren’t tracked well, there are no processes to determine vulnerabilities, servers and workstations not using supported operating systems and a lack of appropriately managing antivirus solutions. “Long-standing information security issues remain unresolved, including insufficient and outdated policies and procedures necessary to safeguard information assets,” reads the report’s summary.

The audit proposes 17 recommendations for the state to bolster its regulatory oversight. Those recommendations intend to address undetected compliance violations, weaknesses in application management, IT security weaknesses and weaknesses in disaster recovery and media backup testing. You can read the full audit here.

german flag

Head of German Police Union Calls for Official Decriminalization of Cannabis

By Marguerite Arnold
No Comments
german flag

Facing the same conundrum as police everywhere after the start of a medical market only this time with federal authorization, the head of the German police union has called for recreational use of cannabis to also be decriminalized.

On the first Monday of February, the head of the BDK – the Association of German Criminal Officers told The Bild (sort of like the New York Post but a national “tabloid” here) that his group, the largest organized union of German police officers, favoured a change in German cannabis laws. Andre Schulz argued that the current laws stigmatized those charged with minor amounts and created opportunities for “criminal careers to start.”

“The prohibition of cannabis has historically been seen as arbitrary and has not yet been implemented in an intelligent and effective manner,” says Schulz. “My prediction is that cannabis will not be banned for long in Germany.”

Why this sudden pronouncement? It is actually not all that sudden and has been long in the offing. One of the largest contingents at both the ICBC and the IACM last year (the biggest cannabis-focussed business and medical conferences in Germany) were police officers from California and Deutschland. And all were singing the same tune.

André Schulz
André Schulz, chairman of the BDK

However beyond a realistic assessment of changing political reality, there are actually several other concrete reasons for not only the statement but the timing of it. In a country where patients can now pick up bud cannabis from the local apotheke (which is that easy for some, although it is still hard for most), the police have the unappetizing prospect of potentially arresting patients. On top of that, the idea of someone being arrested for CBD flower (rather than THC) gives the German polizei plenty of pause. Not to mention that they face this possibility at a time when many of them potentially could be patients themselves (or their families). The idea of arresting an activist in this situation is also one the police do not relish. Legalization rallies here get formal police protection when they march. Ask the average beat cop what they think about cannabis legalization and they tend to roll their eyes.

Then there is this: In stark contrast to the wars over prescribing medical cannabis at a state level in California in the late 90’s, here in Germany, there is a cultural commitment to the concept of sick people having a moral and civil right to obtain the medication they require. The idea of the police arresting them in the process of obtaining the same or because they might be recreational users, is as antithetic to core German sensibilities as the concept of Donald Trump as U.S. President. So is the idea of branding someone a “criminal” if not “drug user” for possession of a drug that is now used as medicine in Germany.

As has been rumoured for some time now, one of the few things that all political parties in Berlin can agree on is a change on the current cannabis laws.As a result, the very idea of both arresting the sick or labelling someone for the rest of their life with a police record for a drug “crime” that nobody considers as such anymore, causes a shock to the system. In many ways, German culture is far more conservative than the U.S. On another, there is a deeply humanistic, liberal strain to German life that also allows nudity, alternative healthcare and lifestyles to flourish (and not just all in Berlin). The current situation over cannabis, in other words, is becoming a political and legal embarrassment even to the beat officers who have to implement such laws.

And then of course there is this: One of the country’s top judges, Andreas Müller, a man well-known to the senior level of BDK, has recently written a book about the horrible situation that faces his own brother because of drug laws in Germany called “Kiffen und Kriminalität.”

Cannabis also falls into this crevice of cultural questioning if not the national zeitgeist of the moment, in multiple ways. It is, beyond the stigma, a natural medicine that is now federally recognized as such and one that the statutory health insurers (public healthcare) is required to cover. No matter that only 64% of submitted rezepts have been formally approved 11 months into Germany’s foray into this world. There are doctors writing them. And there are insurers picking up the tab.

It also means that there are at least 10,000 legal medical cannabis patients that der polizei have no wish to bother. And 10,000 German patients, who look the same as anyone else, are already too many legal users for current laws to stay in place.

Decriminalization, Cultivation & Changing Culture

There are some who say that Europe is “backwards” if not slower than the United States. Certainly those who experience German culture as Auslanders are struck by the procedural requirements of everyday life. Things do move slower here.

However when things do move, they are determinative shifts. Right now, it is impossible to live in the country and not be aware that Kiffen – a slang term for pot auf Deutsch – is legalizing in the U.S., Canada, the rest of Europe and of course other places. Further, Germans with their distrust of bureaucracy and authority and certainly currently rebellious mood, are looking to a way forward for the country in a sea of uncertainty both locally and regionally not to mention globally on any issue, no matter how “symbolic.”

As has been rumoured for some time now, one of the few things that all political parties in Berlin can agree on is a change on the current cannabis laws. The idea of decriminalization, now suggested by one of the country’s top cops, is a natural solution to political deadlock, if not a changing society.

The idea that other countries are also moving on this topic, from the now Brexiting UK to France next door, not to mention all the cultivation focused reform in many European countries, seems to indicate that decriminalization and even recreational reform are coming and now officially on the schedule, and not just to Germany but the entire continent.

mgc-pharma

MGC Pharma Makes Its Slovenian Moves More Final

By Marguerite Arnold
No Comments
mgc-pharma

Right now the map of Europe, from a cannabis cultivation perspective at least, is shaping up to be very much like a game of Risk. Throw the dice, move your armies (or more accurately line up your financing), and apply for federal import and cultivation licenses.

In the process, all sorts of interesting strategic plays are popping up. And as a result, here is a new and actually pretty cool “alternative” reality that is easy to verify in several different ways. Medical cannabis is being cultivated in multiple countries across Europe as of 2018, however unbelievable this was even four years ago. Even though it is still cleary just early days. And those cultivators are already international, operating across federal jurisdictions in Europe and across both the Atlantic and Pacific oceans.

With all the excitement and attention paid to the American hemisphere and the European moves of big Canadian LPs (and they are pretty amazing), there are still other moves afoot that are absolutely of note. Specifically, Australian firms and MGC Pharma in particular, have been moving steadily to establish both distribution and cultivation presence on the ground in Europe.

CannEpil MGC
CannEpil, the company’s first pharmaceutical-grade medical cannabis product for the treatment of refractory epilepsy.

The latest news? MGC’s production facility in Slovenia was officially inspected by authorities and issued an interim license for its production plant in January, before presumably being given a green light of approval permanently. The company is also moving forward with the production of CannEpil, the company’s first pharmaceutical-grade medical cannabis product for the treatment of refractory epilepsy.

Refractory epilepsy affects about 30% of all those who suffer from the condition. Refractory is one of those words however, that hides its real meaning. Translation for those without an MD? This is “drug resistant” epilepsy. Resistant to all drugs before, of course, except cannabinoids.

And that is a welcome relief for patients domestically and throughout Europe. It is also a note to investors looking for savvy Euro plays right now.For all manufacturers now considering entering this market, this is a complicated environment to begin negotiating

This is a major win for MGC. Not to mention a vibrant medical market. No matter where specialty drugs are now going to be sourced from.

A Treatment-Driven “Branded” Pharma Market

What more traditional American pharmaceutical companies have known for a long time (certainly since the 1950’s) is now a fact also facing all cannabis brands coming to the European market and Germany in particular. The regulatory environment is hostile to the extreme for Auslanders in particular. Specifically, the development of “branded” or “name brand” drugs runs economically and philosophically counter to the concept of public health insurance itself even as their market accessibility is required by the same. This is even more the case for foreign firms with such ideas.

Here is the problem. Name brands are expensive. They are also usually outlier drugs for specific, relatively rare conditions. This is also the place where new drugs enter the market, no matter what they are.mgc-pharma

In an environment where the government negotiates bulk contracts for common drugs and these can be bought at every apotheke (pharmacy) for 10 euros and a doctors rezept (prescription), the chronically ill and those with drug resistant conditions are left out of the discussion. They face steep and usually inaccessible bills up front for all meds not in bulk purchase categories. And that as of last year in Germany specifically, includes cannabis. That is the case even though technically the government is now buying cannabis in bulk and making purchase commitments to foreign companies for the same. Insurance companies, however, are still forcing patients to pay the entire out of pocket cost up front and wait to reimbursed.

“Generic” Brands For Off label Chronic Conditions

However medical cannabis is clearly not just another drug. Cannabis falls on both sides of every fence in this discussion.

The first problem is that the providers (importers and soon to be domestic cultivators) are private companies. All of them are foreign helmed at this point, with a well-developed bench of branded products. That makes all cannabis drugs, oil and flower, by definition, fall into the “expensive” branded category immediately. The German, Italian, and Danish governments appear to be now negotiating bulk buys during a licensing season that is well on the way to domestic cultivation too. That alone will affect domestic prices and new products. But again, this is now several years behind other countries – notably MGC in Slovenia, Tilray in Portugal, all things now afoot in Denmark and clearly, Greece.

Next, cannabis’s status as a still imported, speciality, semi-trial status in the EU means it is in the most restricted categories of drugs to begin with (no matter the name or strength of the cannabinoid in particular). And because it can be bought as bud, in an “unprocessed” form as well as processed oils or other medicine, this is throwing yet another spanner into the mix.

Look for distribution deals all over Europe as a result, starting with PolandThen there is this wrinkle. Cannabis (even CBD) is currently considered a narcotic within the EU and even more specifically the largest continental drug market – Germany. The German regulatory system in particular, also imposes its own peculiarities. But basically what this means in sum is that the legal cannabis community including distributors and pharmas at this point, have to educate doctors in an environment where cannabis itself is a new “brand.” Who manufactures what, for the purposes of German law, at least, is irrelevant. It is what that drug is specifically for that matters.

For all manufacturers now considering entering this market, this is a complicated environment to begin negotiating. This is sure not how things are back home.

What this also means is that low cost, speciality cannabis products will continue to be imported across Europe for the German and other developing, regulated sovereign markets here as doctors learn about cannabis from condition treatments. And that is what makes the news about MGC even more interesting.

Look for distribution deals all over Europe as a result, starting with Poland. And, despite the many well-connected and qualified hopefuls from Canada, a little competition in the German market too.

MS is the only “on-label” drug at present for cannabis treatment in Germany. As a result, particularly when it comes to paediatric treatment for drug resistant epilepsy, this is the kind of strategic presence that will create a competitive source for highly condition-branded medication for a very specific audience of patients. It is also what the German market, for one, if not the EU is shaping up to be at least in the near term.

As this interesting abstract from 2006 clearly shows, this kind of epilepsy is also high on the German radar from a public policy and healthcare-cost containment perspective. The costs of treatment per patient were between 2,600 and 4,200 euros for three months a decade ago, and not only have those risen, but so have the absolute number of people in similar kinds of situations.

Further, with indirect costs far higher than direct costs including early retirement and permanent semi disability, MGC’s market move into an adjacent (and cheaper) production market might be just what the German doctors if not policymakers now looking at such issues, will order.

EVIO Logo

EVIO Labs: The First Accredited Cannabis Lab in Florida

By Lauren Masko
No Comments
EVIO Logo

EVIO Labs recently became the first cannabis laboratory in Florida to obtain ISO 17025 accreditation. Perry Johnson Laboratory Accreditation, Inc. (PJLA), an organization that provides third-party assessments to ISO/IEC 17025, accredited EVIO Labs. The assessment process that lead to ISO 17025 accreditation for EVIO Labs included a thorough review of their quality management system, their capability to perform potency and contaminant testing for cannabis products.

Tracy Szerszen, president and operations manager at PJLA, encourages this international standard for laboratories to provide confidence to end-users that the test results they receive are reliable. She says laboratories that achieve this accreditation are showing they have the proper tools, equipment and staff to provide accurate testing. “It is a very critical component of the industry, and becoming accredited provides the assurance that laboratories are performing to the highest standard,” says Szerszen. “EVIO Labs has taken the right step in their commitment towards meeting this standard and providing clean and safe cannabis for the patients of Florida.”

PJLAEVIO Labs provides cannabis testing for cannabinoid and terpene profiles, microbiological and pesticides contamination, residual solvent, heavy metals, mycotoxins, water activity and moisture content. Chris Martinez, co-founder and president of EVIO Labs Florida explains that the Florida Department of Health mandates that an independent third-party laboratory tests medical cannabis to ensure that these products are safe for human consumption. Martinez says their first priority is the safety of their patients, and ensuring that EVIO Labs provides clean and safe cannabis for Florida.

Chris Martinez
Chris Martinez, co-founder and president of EVIO Labs Florida

Martinez launched their laboratory with some help from Shimadzu last year. “Our Broward lab is powered by Shimadzu with over $1.2M in the latest testing equipment utilizing LCMS technology with the world’s fastest polarity switching time of 5 m/sec and scan speeds of 30,000 u/sec with UF Qarray sensitivity 90 times that of previously available technologies,” says Martinez. According to Martinez, their licensing agreement with EVIO Labs (OTC:SGBYD) marked a first for the publicly traded company with exclusivity in the Florida market. The agreement includes proprietary testing methodologies, operating procedures, training and support.

Every certificate of analysis is reviewed by a lab director with over 20 years of experience operating in FDA regulated labs. Martinez says that EVIO has some of the most advanced technology in the industry, which provides them the opportunity to quickly provide results, frequently as fast as a 24-hour period. Martinez and his team are currently building a 3,300 square-foot laboratory in Gainesville, which is expected to be running by March of this year.

Steven Burton

Top 4 Food Safety Hazards for the Cannabis Industry

By Steven Burton
18 Comments
Steven Burton

As many US States and Canadian provinces approach legalization of cannabis, the question of regulatory oversight has become a pressing issue. While public awareness is mainly focused on issues like age restrictions and impaired driving, there is another practical question to consider: should cannabis be treated as a drug or a food product when it comes to safety? In the US, FDA governs both food and drugs, but in Canada, drugs are regulated by Health Canada while food products are regulated under the CFIA.There are many food safety hazards associated with cannabis production and distribution that could put the public at risk, but are not yet adequately controlled

Of course, there are common issues like dosage and potency that pharmaceutical companies typically worry about as the industry is moving to classifying its products in terms of percentage of chemical composition (THC, CBD, etc. in a strain), much as we categorize alcohol products by the percentage of alcohol. However, with the exception of topical creams and ointments, many cannabis products are actually food products. Even the herb itself can be brewed into teas, added to baked goods or made into cannabis-infused butters, oils, capsules and tinctures.

FDAlogoAs more people gain access to and ingest cannabis products, it’s only a matter of time before food safety becomes a primary concern for producers and regulators. So when it comes to food safety, what do growers, manufacturers and distributors need to consider? The fact is, it’s not that different from other food products. There are many food safety hazards associated with cannabis production and distribution that could put the public at risk, but are not yet adequately controlled. Continue reading below for the top four safety hazards for the cannabis industry and learn how to receive free HACCP plans to help control these hazards.

Aflatoxins on Cannabis Bud

Just like any other agricultural product, improper growing conditions, handling and storage can result in mold growth, which produce aflatoxins that can cause liver cancer and other serious health problems. During storage, the danger is humidity; humidity must be monitored in storage rooms twice a day and the meter must be calibrated every month. During transportation, it is important to monitor and record temperatures in trucks. Trucks should also be cleaned weekly or as required. Products received at a cannabis facilities should be tested upon receiving and contaminated products must always be rejected, segregated and disposed of safely.

Petri dish containing the fungus Aspergillus flavus. It produces carcinogenic aflatoxins, which can contaminate certain foods and cause aspergillosis, an invasive fungal disease.
Photo courtesy of USDA ARS & Peggy Greb.

Chemical Residues on Cannabis Plants

Chemical residues can be introduced at several points during the production and storage process. During growing, every facility should follow instructions for applying fertilizers and pesticides to crops. This includes waiting for a sufficient amount of time before harvesting. When fertilizer is being applied, signs must be posted. After cannabis products have been harvested, chemical controls must be in place. All chemicals should be labelled and kept in contained chemical storage when not in use to prevent contamination. Only food-grade chemicals (e.g. cleaners, sanitizers) should be used during curing, drying, trimming and storage.

Without a comprehensive food safety program, problems will inevitably arise.There is also a risk of excessive concentration of chemicals in the washing tank. As such, chemical concentrations must be monitored for. In general, water (obviously essential for the growing process) also carries risks of pathogenic bacteria like staphylococcus aureus or salmonella. For this reason, city water (which is closely controlled in most municipalities) should be used with an annual report and review. Facilities that use well water must test frequently and water samples must be tested every three months regardless.

Pathogenic Contamination from Pest Infestations

Insects, rodents and other pests spread disease. In order to prevent infestations, a pest control program must be implemented, with traps checked monthly by a qualified contractor and verified by a designated employee. It is also necessary to have a building procedure (particularly during drying), which includes a monthly inspection, with no holes or gaps allowed. No product should leave the facility uncovered to prevent fecal matter and other hazards from coming into contact with the product. Contamination can also occur during storage on pallets, so pallets must be inspected for punctures in packaging material.

Furthermore, even the best controlled facility can fall victim to the shortcomings of their suppliers. Procedures must be in place to ensure that suppliers are complying with pest and building control procedures, among others. Certifications should be acquired and tracked upon renewal.

Pathogenic Contamination Due to Improper Employee Handling

Employee training is key for any food facility. When employees are handling products, the risk of cross-contamination is highest. Facilities must have GMP and personnel hygiene policies in place, with training conducted upon hiring and refreshed monthly. Employees must be encouraged to stay home when sick and instructed to wear proper attire (gloves, hair nets, etc.), while glass, jewelry and outside food must not be allowed inside the facility. Tools used during harvesting and other stages may also carry microorganisms if standard cleaning procedures are not in place and implemented correctly by employees.

As the cannabis industry grows, and regulatory bodies like the FDA and CFIA look to protect public safety, we expect that more attention will be paid to other food safety issues like packaging safety (of inks and labels), allergen control and others. In the production of extracts, for example, non-food safe solvents could be used or extracts can be mixed with ingredients that have expiration dates, like coconut oil. There is one area in which the cannabis industry may lead the way, however. More and more often, risks of food terrorism, fraud and intentional adulteration are gripping the food industry as the global food chain becomes increasingly complex. It’s safe to say that security at cannabis facilities is probably unparalleled.

All of this shows that cannabis products, especially edibles (and that includes capsules and tinctures), should be treated the same as other food products simply because they have the same kinds of hazards. Without a comprehensive food safety program (that includes a plan, procedures, training, monitoring and verification), problems will inevitably arise.