Tag Archives: regulations

PerkinElmer Awarded Five Emerald Test Badges

By Aaron G. Biros
1 Comment

According to a press release published today, Emerald Scientific awarded PerkinElmer five badges for The Emerald Test, a bi-annual Inter-Laboratory Comparison and Proficiency Test (ILC/PT) program. Awarding the badges for Perkin Elmer’s instruments and testing methods affirms their ability to accurately detect pesticides, heavy metals, residual solvents, terpenes and potency in cannabis.

According to Greg Sears, vice president and general manager of Food, Chromatography & Mass Spectrometry, Discovery & Analytical Solutions at PerkinElmer, they are the only instrument manufacturer to receive all five accolades. “To date, PerkinElmer is the only solutions provider to successfully complete these five Emerald Scientific proficiency tests,” says Sears. “The badges underscore our instruments’ ability to help cannabis labs meet the highest standards available in the industry and effectively address their biggest pain point: Navigating diverse regulations without compromising turnaround time.”

The instruments used were PerkinElmer’s QSight 220 and 420 Triple Quad systems, which are originally designed for accurate and fast detection/identification of “pesticides, mycotoxins and emerging contaminants in complex food, cannabis and environmental samples,” reads the press release. They also used their ICP-MS, GC/MS and HPLC systems for the badges.

PerkinElmer says they developed a single LC/MS/MS method using their QSight Triple Quad systems, which helps labs test for pesticides and mycotoxins under strict regulations in states like California and Oregon. They performed studies that also confirm their instruments can help meet Canada’s testing requirements, which set action limits nearly 10 times lower than California, according to the press release.

Cannabis Facility Construction Retrofitting Buildings for Processing, Growing

By Aaron G. Biros
1 Comment

Cannabis Facility Construction (CFC), based in Northbrook, Illinois, has taken a rather unique approach to facility design and building in the cannabis market. According to a press release published today, the company takes unused buildings and remodels them into facilities designed specifically for the cannabis industry.

A 5,200 square foot CFC-built dispensary in Morris, Illinois.

CFC, which is a division of Mosaic Construction, retrofits unused, abandoned buildings, turning them into cannabis cultivation and processing facilities, as well as dispensaries. According to that press release, they have developed buildings on 28 different facilities to date, covering over 328,970 square feet.

The Litchfield, Illinois cultivation facility, remodeled by CFC

According to Ira Singer, Principal at CFC, they provide a turnkey service for licensed operations to retrofit old buildings, including staying compliant with state cannabis regulations. “Since the cannabis industry is emerging as a growth market, investors need to appreciate there is an art and a science to converting raw materials of cannabis and finished products,” says Singer. “CFC’s medicinal processing centers are outfitted to master the product in all its forms and uses, and to meet all state regulations and local fire and safety codes. Its three-stage approach encompasses its Design-Build expertise for processing facilities; construction management; security infrastructure and planning; and permitting and compliance support.”

For example, they helped investors from Highland Park, Illinois take an unused building in Garden City, Michigan and convert it into a 48,000 square foot cultivation, processing and dispensary facility. CFC also does business with Greenhouse, a medical cannabis company with facilities throughout Illinois.

For more information and to see some of their work, check out their portfolio here.

Wayland Group’s GMP Certification Begins To Clarify German Cultivation Scenarios

By Marguerite Arnold
No Comments

Wayland Group just announced that they received GMP (good manufacturing practices) and GDP (good distribution practices) certification for their Ebersbach facility near Dresden, Germany. The plant already produced 2,400 kg of CBD isolate last year.

The certifications give Wayland the right to sell directly into German and other EU markets, and more significantly, the ability to store bulk product domestically.They have, by far, the largest cultivation site now legal in the country, with distribution to not only German pharmacies, but Europe beyond that.

Wayland is also widely believed to have applied for the much-stalled German cultivation bid. With per-gram production prices at Ebersbach cited at 1.34 euros, this certainly also sends an interesting message about who might win what in the bid, and where the price of cannabis might be headed.

Currently, cannabis is being sold to pharmacies in Germany at prices almost twice the retail price per gram in Canada. In turn, this means that the “retail” price of floss (flower) is running much higher than it is in more established markets (read Canada and of course the U.S.). Point of sale prices in Germany, for example, run between $2-3,000 per month per user. That is an era that is clearly also now coming to an end.

The Cultivation Bid

With the news of Wayland’s certifications, comes an almost certainty that they will become finalists in the pending cultivation bid in Germany. Why? They have, by far, the largest cultivation site now legal in the country, with distribution to not only German pharmacies, but Europe beyond that.

If Bedrocan was the incumbent favorite to win the majority of the licenses handed out to any one firm (especially given the recent increase in cannabis allowed to be sold into Germany across the Dutch border), this places Wayland in a strong second. If Bedrocan is not involved in the bid, this news might indicate that Wayland might be the largest winner in German cultivation licenses this time around.

The plot indeed thickens.

Prices: In General, Across Europe

The firm will be providing product, no matter what the outcome of the bid, at a production price, which is in line with the widely estimated requirements of the bid itself. Winning firms must also be able to provide pricing that is competitive to each other. It is unclear where the government will set that floor, but all medical cannabis sold in Germany after that, will then be competing with that price.

Could it be that the reference price of cannabis, in other words, has just been indirectly announced with the Wayland certifications?

Then there is this wrinkle. Given that production in Germany is more expensive than other countries in Europe (see Portugal, Spain and Greece in particular), the difference in labor costs may still outweigh the costs of shipping across the continent. Or, as the market gets going, it may not. Regardless, in a country like Germany where drug prices are routinely pre-negotiated in bulk by the government, cannabis prices will start to be regulated in a way they have not in other places, notably Canada. This means that heady visions of “mark-ups” to meet a so far unmet demand are also probably not in the cards, although government supported cannabis exports might be.

Insurance “Brands” And Bulk Buys Ahead?

Then there is this intriguing wrinkle. German “public” insurance patients (in other words 90% of the population) are not always free to choose the products they use. Why not? Beyond bulk purchases by the government, insurance companies are also allowed to enter into bulk contracts with some providers, namely medical equipment manufacturers. This is sort of the same situation as visiting an “in network” provider in the United States. In other words, the equipment is free (or vastly cheaper) to the patient if the selected brand is chosen.

Could cannabis go the same route?

german flag
Photo: Ian McWilliams, Flickr

At this juncture, that is unclear. Dronabinol, the only widely available source of cannabinoids in the country until 2016, is considered more of a generic than “name brand.” So far, neither it nor Sativex were pre-negotiated drugs. This was also for a very simple reason. There were only 800 registered patients in Germany until that year. That is far under the “orphan drug” category, which in Germany is 10,000 people. At this point, there are already much higher patient numbers (some cite as many as 79,000), with the majority of treatment going to patients with chronic pain.

By definition, this means that cannabis prices here will continue to be negotiated with little room for high mark-ups as the market consolidates. The more patients there are, the more attention will be paid to ensuring that the drug becomes affordable- not just to patients, but also insurers.

There is zero chance that the government will allow German public healthcare to be bankrupted over this still stigmatized plant, no matter how medically efficacious it is.

Germany and Israel at this point, have the longest established insurance mandate for cannabis- and in the German situation, this is now just two years old. The British NHS just announced that cannabis would be covered, with Luxembourg and Poland now also in the mix. However, the place of the insurance community in this debate is also a factor to be considered into the entire conversation as it unfolds here, beyond efficacy.

Dutch insurers in fact, stopped covering the drug almost as soon as Germany announced its own experiment.

It is unlikely that Wayland is unaware of such realities. The company has former executives from AOK on its German board. AOK is one of the largest statutory health insurers in Germany and one on the front line of cannabis reimbursements for the last two years.

Mission Mountain Laboratories: The First Accredited Cannabis Testing Lab in Montana

By Aaron G. Biros
1 Comment

Last week, Mission Mountain Laboratories (MML), based in Arlee, Montana, received their ISO/IEC 17025:2005 accreditation from Perry Johnson Laboratory Accreditation (PJLA). This marks the first cannabis testing lab in Montana to get ISO 17025-accredited.

According to a PJLA client spotlight, MML is a female-owned business with two generations of family-run business experience. Before they took the plunge into medical cannabis testing, MML started out testing in public water systems in Montana. They have since expanded their regimen of testing services to offer a host of other services, but most recently adding compliance testing for medical cannabis and cannabis related products.

The Mission Mountain Labs team

According to Kimberly Nuccio, president of MML, this accreditation allows them to grow their business considerably. “Accreditation has opened greater opportunities for business growth by attracting larger companies that are looking for reassurance that a laboratory follows the highest testing standards,” says Nuccio. “Being an accredited lab gives them that added confidence necessary when deciding which lab to partner with for their testing needs. Mission Mountain Laboratories is the first Medical Marijuana Lab to achieve ISO accreditation in the state of Montana, and PJLA accreditation helped expand us into the new arena of Medical Marijuana compliance testing.”

MML has plans to expand their operations greatly, including opening a location in Florida by 2020. “We are aware of the increased and urgent demand for quality Cannabis compliance testing nationwide and are currently working on a 3-year plan to expand into Florida and several other states to fill this void,” says Nuccio. “These new locations will also be equipped to provide full service testing for Nutraceuticals, Food manufacturing, and Environmental businesses.”

8 Mistakes Businesses Make When Managing Product Labels: Part 2

By Rob Freeman
No Comments

Editor’s Note: This article contains the last four common labeling mistakes that businesses can make. The previous four mistakes were published last week here. 

Mistake #5: Planning Just-In-Time Inventory Too Close to Production; Effecting On-time Deliveries

Using JIT (Just-In-Time) management is common throughout North America. JIT involves manufacturers and suppliers trying to minimize, or even eliminate, their inventory. This approach relies on suppliers to deliver materials just before production is started. When this method is done properly, it is a very efficient way to minimize production costs, but when companies do not prepare for a “crisis” situation, they will have nothing in stock to fall back on.

Minimizing inventory costs is always a challenge. It’s a never-ending contradiction trying to maintain low inventory costs while factoring the percentage of potential new growth. Calculations can fluctuate from month to month, especially when industries rely on commodity ingredients or are impacted by sudden regulatory changes like we see with the cannabis, food packaging, and health supplement markets. Front runners in these markets practice minimizing their product label inventories, but their needs might quickly change from one day to the next. They do not want to place a one-time annual label order for each SKU. If an ingredient runs out of supply or a regulatory change affects their production profile, they would be sitting on unusable labels that will go to waste.

Best Method Approach: Think in terms of what the bottom line effect will be when factoring how you should manage your inventory. Try not to reduce your inventory too low. This could cause your company to experience shipping delays when complications arise with suppliers or quality control. You should have at least one-to-two production cycles worth of inventory available for those “crisis” moments.

Rob Freeman, author of this article, is the Director of Business Development and Marketing at Label Solutions Inc.

This backup inventory can also help reduce paying for excessive rush fees. Sometimes businesses can experience unexpected demand for a product, especially when companies consolidate production plants, acquire other companies, or have a new product launch. Supplier material shortages can greatly impact internal quality control and delay delivery times. Building a strong business relationship with your label provider is key to working around business demands and potential problems; which in turn, will help your label provider ship on-time deliveries so your production deadlines are met.

Mistake #6: Selecting the Lowest Price, But Approving the Wrong Materials for Your Product Needs

Sometimes clients buy the lowest priced labels without their procurement department knowing what the label specification requirements should be. It’s always a good business practice to shop for the best price, but it is equally as important to make sure you understand what you’re buying for that price.

Label providers vary on the quality of work they do, value-added services they offer, their production expertise, and the quality of material they use. Additionally, the hidden potential costs to lowest price shopping is that once the construction of those labels fail, it could cost you much more than a simple reorder.

Best Method Approach:Establish clear and concise procedures so your production team can forward the necessary criteria for your procurement department to have during the buying process.

brands want strong, eye-catching labels that stand out online, on the shelf, and/or on the retail floor. On a separate note, some businesses and manufacturers don’t care how long their brand and contact information remains on their product after the purchase. This gives them the flexibility to buy extremely low-quality material, but the outcome is a much lower brand awareness reminder at the end of the product’s use. But if your business model is such that you sell a “one-time use” product and all that you need is the label to survive through the POS, then the cheapest materials and lowest price might be your best solution.

In most cases, brands want strong, eye-catching labels that stand out online, on the shelf, and/or on the retail floor. Manufacturers want their labels to remain on their product, so their customers have a reminder of what they need to buy again or the ability to reread product use instructions and label warnings. Even if you don’t require the most expensive materials, using good quality, durable substrates and inks is always a solid approach.

Mistake #7: Not Preparing for Oil Based Products

One of the most popular products expected in retail for 2019 will be essential oils and/or CBD infused oil ingredients in foods, drinks, and wellness supplements. One of the most common mistakes relating to oil-based products is that entrepreneurs often forget that oils can soak into paper substrates and/or disperse certain inks, even when laminated.

Whether your product is on display in retail, or being sampled at a trade show, the last thing you want to be concerned about is your product name and contact information smearing or washing out. Even the smallest drop of oil can seep into a paper label and spread the ink to the point that you’ll have your own little tie-dye action on the label. That might look cool to some, but you lose your branding and the perception with most retail customers will be that your company is either cheap or is not professional.

Best Method Approach: There are affordable films such as polypropylene materials that will allow you to print the look you want while still protecting your branding and product. From cooking oils to industrial grade oils, the approach is the same but may require different types of films and ink solubility, so each bottle and container has oil resistant labels that maintain a professional look.Whenever one of our clients launch a new product or changes the intended surface conditions for label application, testing the label is always extremely important

If you’re feeling overwhelmed, remember that you don’t need to select all the label materials on your own. Your label provider should help you settle on the best solution.

Mistake #8: Not Properly Testing New Labels and New Product Surfaces

This is one of the most common and overlooked issues. Whenever one of our clients launch a new product or changes the intended surface conditions for label application, testing the label is always extremely important. This is especially critical when dealing with high quantity orders.

Best Method Approach: Testing parameters should be outlined by you and your label provider so both parties understand how long the label and the ink consistency should remain on the surface after purchase and use of product. There are wide variations of testing, so it will depend on the type of product and the intended industry.

For example, testing hand-applied, durable labels on powder coated metals for the boat and trailer industry require a completely different testing method compared to tests for typical food and beverage products that are machine applied. Usually, with uniform container products like food clamshell packaging, beverage cans, and supplement jars, all you will need to do is make sure to test labels on your production line, so your team is confident with the results.

Final Thoughts

In summary, preventing just one of these mistakes can yield huge cost savings no matter if your company is a start-up or a large corporation. Even if these eight common mistakes do not directly apply to your own issues, hopefully the “Best Methods” approach will give your company ideas about how you can prepare for future product releases, reduce product label issues, and improve your own quality control metrics.

If you have topics relating to product labeling that you would like me to discuss, please write to info@easylabeling.com. Be sure to save this article and forward it to your peers for future reference.

WHO Makes Noise About Cannabis “Rescheduling”

By Marguerite Arnold
No Comments

At this point in the end of prohibition, not even the United Nations (UN) or the World Health Organization (WHO) are immune to the great green wave sweeping the planet. Yet, lest anyone get too optimistic about developments at the nose bleed level of international drug reform, the newest round of headlines regarding “WHO cannabis reform” is hardly cause for celebration.

The Story At The International Level So Far

In documents obtained by Cannabis Industry Journal last fall, it appeared that cannabis reform of the serious kind had caught the eye of senior leaders at the WHO. Further, it also appeared that some kind of decisive action or declaration would be forthcoming by the end of the year.

Yet as reported at the end of January, such decisions appear to be headed for a tortoise speed approvals track. Yes, it appears that CBD will probably be descheduled, and from both the hemp and cannabis perspective. That should be good news to many who are caught in a raft of international standards that are confusing and all over the place on a country-by-country level. However, this will not be much of a boon to the industry in Europe, in particular, where the discussion is less over CBD but the source of it, and how distillates are used. From this perspective, the draft WHO documents will make no difference, except perhaps to speed the acceptance of CBD, and create clearer regulations around it.

On the THC front, the WHO appears to do nothing more than move cannabis squarely into international Schedule I territory. More interesting of course, is the intent of international regulators to keep cannabis very much in uncertain status while moving “pharmacized” versions of the same into Schedule III designation.

What Does The Opinion of The WHO Really Mean?

What this means is also still unclear except that those who want to sell to regulated medical and nonmedical markets have to get their products (whatever those are) registered as medicine or a legitimate consumer product in every jurisdiction and eventually at a regional level (see Europe). That is clearly underway right now by both the big Canadian and emerging Israeli entities in the market as well as savvy European players in both verticals. That said, it is also a game that is about to create a very interesting market for those who are able to produce cheap, but high-grade oils in particular.

What Does This Mean For The Future Of Flower?

On the medical front, Germany became the third country in the world to consider reimbursing flower via national healthcare. Of the three who have tried it to date so far (and it is unclear what Poland will do at this point longer term), Israel is inching away and Holland nixed the entire cannabis covered by insurance conversation at the same time Germany took it on. Where that plays out across Europe will be interesting, especially as the cost of production and end retail cost continues to drop. And doctor education includes information about “whole plant” vs. pre-prescribed “dosing” where the patient has no control. The reality in the room in Europe right now is that this drug is being used to treat people with drug resistant conditions. Dosing dramas in other words, will be in the room here for some time to come as they have in no other jurisdiction.

european union statesBeyond dosing and control issues that have as much to do with doctors as overall reform, flower is still controversial for other reasons. One, it is currently still being imported into Europe from highly remote and expensive import destinations. That will probably change this year because of both the cultivation bid and Israel’s aggressive move into the middle of the fray as well as widely expected ex-im changes that will allow imports from countries throughout Europe. However, in the meantime, this is one of the reasons that flower is so unpopular right now at the policy and insurance level. The other is that pharmacists in Germany are allowed to treat the flower as a drug that must be processed. In this case, that means that they are adding a significant surcharge, per gram, to flower because they grind it before they give it to patients.

How long this loophole will exist is unclear. However, what is also very clear is that oils in particular, will play a larger and larger role in most medical markets. Read, in other words, “pharmaceutical products.”

For this reason, the WHO recommendations, for one, are actually responding to unfolding realities on the ground, not leading or setting them.

Setting A Longer-Term Date For Widespread Recreational Reform

This conservative stance from the WHO also means, however, that in the longer run, individual country “recreational reform” particularly in places like Europe, will be on a slower than so far expected track. There are no countries in the EU who are willing to step too far ahead of the UN in general. That includes Luxembourg, which so far has made the boldest predictions about its intentions on the recreational front of any EU member. However, what this also may signal is that the UN will follow the lead set by Luxembourg. Even so, this legitimately puts a marker in the ground that at least Europe’s recreational picture is at least five years off.

In the meantime, the WHO recommendations begin to set international precedent and potentially the beginnings of guidelines around a global trade that has already challenged the UN to change its own regulations. In turn, expect these regulations to guide and help set national policy outside a few outliers (see Canada, Uruguay and potentially New Zealand) globally.

Bottom line, in other words? The latest news from the UN is not “bad” but clearly seems to say that cannabis reform is a battle that is still years in the making. That said, from the glass is half full perspective, it appears, finally, there might be the beginning of a light at the end of the international tunnel of prohibition.

Canadian Companies Continue European Cannabis Moves

By Marguerite Arnold
No Comments

There is a lot of European news afoot from the big public Canadian companies between all the headlines about Israel. Namely, established cannabis companies in the market already continue to shore up their presence across multiple member EU states.

What is at stake? Establishing some kind of European foothold in an environment where licensing and production costs will not bust the bank- and what will be the first government-set, pre-negotiated bulk price for medical cannabis flower. For all the high-flying news of even hundred million-dollar (or euro) investments, right now the biggest hunt is on for ways to trigger sales figures that continue to grow steadily in the customer column.

There is also a dawning realization that prices are going to start stabilizing if not falling after the German government finalizes its selection of bid winners.european union states

As a result of all of this, to compete against each other and streamline distribution and supply chain costs, the larger Canadian companies in the market are clearly angling to set up efficient distribution networks- even if that means buying pieces of them one country and property at a time.

How well that will work in the longer run remains to be seen- but it is a play that is starting to show up in other European developments (from the Israeli side). That said, the latest news of the big guys in the field make sense within this context, if none other.

Canopy Growth Announces UK and Polish Moves

Spectrum Cannabis, the European-based medical brand of Canopy Growth chalked two more achievements off its Euro “to do list” in January. At the beginning of the month, Spectrum announced it was preparing to enter the UK market via the creation of a joint venture with Beckley Canopy Foundation, Spectrum Biomedical.

In Poland, the company also announced the successful shipment of its high-THC whole flower “Red No.2.” The Polish government began allowing sales late last year.

Neither development however should be a surprise to those watching the strategy of either Canopy or for that matter several other public Canadian cannabis companies. Aurora, for example, announced its first successful shipment into the country on the same day that the Polish government changed the law. On the British side, the combined forces of changing the regulatory scheduling of cannabis and allowing the drug to be dispensed by prescription have certainly changed the game on some levels. Brexit is about to play havoc with most imported products, and cannabis is no exception to this.Canopy_Growth_Corporation_logo

In this sense, the challenges facing both British and Polish patients right now are also fairly analogous. Importing is the only way to get the drug to patients, and the cost of import is also prohibitively high for most. Then of course, there is actual approval beyond that, which is also a problem everywhere cannabis has become legal.

While both developments of course, are good news for the company, this does not mean that the initial going will be easy or smooth for any company, including one as skilled at strategic market entry in core countries across the continent for the last several years as Spectrum has reliably proven to be.

Green Organic Dutchman Gets Cultivation License In Denmark

TGOD has now gone where other Canadian Euro cannabis players have gone before– namely it has joined the national trial program and several other Canadian cannabis companies before it (see Spectrum Cannabis for one) in Denmark.

Why are so many public cannabis companies attracted to the tiny country? The first is that the country, like Switzerland, in fact, is not as bound by EU rules as say, Germany and France. It can “experiment” in ways that are notably different from its neighbors.

As a result of this and a change in the law that began a multiyear trial to experiment with regulation and medical efficacy, cultivation licenses are also easier to obtain than in other places. There are also other plusses to establishing a presence in the country if not the continent including a strong social care system, and a research environment that promises to produce great results on the medical efficacy discussion continent wide.

Liberty Health Sciences Receives Second GMP Certification

By Aaron G. Biros
2 Comments

According to a press release sent out last week, Liberty Health Sciences announced that the British Standards Institution (BSI) awarded the Good Manufacturing Practices (GMP) certification for a facility located in Gainesville, Florida. The certification covers their 10,000 square foot medical cannabis manufacturing facility, where much of their extraction and processing takes place. Liberty also operates a large cultivation space at the same campus.

“it demonstrates our commitment to producing the highest quality and safest products possible for our customers throughout the state of Florida”According to Jessica Engle, director of regulatory compliance for Liberty, they actually did much more than just a GMP certification, including designing a HACCP plan. “In addition to GMP compliance, Liberty has gone above and beyond the DOH requirements to create a fully operational HACCP (Hazard Analysis Critical Control Point) plan that helps ensure the products we produce are safe for consumers,” says Engle. “The basis for HACCP is a scientific approach to preventative risk analysis. Every time a process changes, equipment changes, or raw material changes, our HACCP team meets to identify potential physical, chemical, and microbiological risks. Preventative measures are then put into place to help reduce the likelihood of the contamination hazard from ever occurring.”

Florida’s regulations on medical cannabis producers and processors actually require a form of certification demonstrating proper food safety protocols. “Within 12 months after licensure, a medical marijuana treatment center must demonstrate to the department that all of its processing facilities have passed a Food Safety Good Manufacturing Practices, such as Global Food Safety Initiative or equivalent, inspection by a nationally accredited certifying body,” reads Rule 9 in the 2017 Florida Statute. Edibles producers in Florida “must hold a permit to operate as a food establishment pursuant to chapter 500, the Florida Food Safety Act, and must comply with all the requirements for food establishments pursuant to chapter 500 and any rules adopted thereunder.” The rules also lay out requirements for packaging, dosage and sanitation rules for storage, display and dispensing of edible products.

Also according to the press release, the company is expecting to grow immensely, saying they will add an additional 160,000 square feet of cultivation space at their Gainesville campus. George Scorsis, CEO of Liberty Health Sciences, says this GMP certification is an important landmark for them. “Receiving GMP certification at an additional facility is a major milestone for Liberty Health Sciences and it demonstrates our commitment to producing the highest quality and safest products possible for our customers throughout the state of Florida,” says Scorsis. “This achievement reflects the incredibly high standards we expect of ourselves and that our clients expect as a patient provider. We will continue to produce the highest quality products and exceed production standards that surpass even the most stringent regulatory requirements.”

Liberty has dispensaries, manufacturing facilities and cannabis education centers all over Florida. They have plans to launch a large number of locations in 2019, including ones in Boca Raton, Ft. Myers, Miami, Orlando and more.

Beleave Achieves ISO 9001 Certification

By Aaron G. Biros
No Comments

According to a press release, Beleave Inc. announced recently that their subsidiary, Beleave Kannabis Corporation, received the ISO 9001:2015 certification. The facility that received the certification, based in Hamilton, Ontario, was certified “for the research, development, and production of cannabis products for medicinal and recreational purposes,” reads the press release.

Beleave is a vertically-integrated cannabis business headquartered in Oakville, Ontario that cultivates cannabis as well as producing oils and extracts. The company operates in both medical and recreational sectors of the market. They have been working on developing cannabis food and beverage products, such as infused powders and sugars, expecting that the recreational cannabis market in Canada will soon open its doors to infused products in 2019.

ISO 9001:2015 is an international standard that stipulates requirements for a quality management system (QMS), showing that a facility can provide products that meet customer and regulatory requirements. ISO 9001:2015 is the most up-to-date version for the standard, which can help show a company’s commitment to quality, efficiency and consistency. The 2015 version uses criteria with an emphasis on risk-based thinking to aid in the application of the process approach, improved applicability for services and increased leadership requirements.

“We continue to develop international partnerships and plan to enter global markets”The company’s facility was certified by Bureau Veritas Certification Holding SAS in late January of 2019. According to Roger Ferreira, chief science officer at Beleave, the process of certification was no easy undertaking. “After many months of hard work and preparation, we are extremely proud to be one of the few licensed producers of cannabis to have received ISO 9001:2015 accreditation,” says Ferreira. “This certification reflects Beleave’s ongoing commitment to quality across key elements of our business, which includes research, innovation, and production of cannabis products.”

Going beyond Canada, Ferreira says they are building the foundation of a company preparing to expand internationally. “Further, this internationally recognized certification for our quality management system positions us well as we continue to develop international partnerships and plan to enter global markets,” says Ferreira. Through their ownership in Procannmed S.A.S., they are licensed to cultivate and produce medical cannabis products out of Colombia, with the goal to export products to the Latin American market. They have also partnered with Canymed GmbH, based in Germany, to further explore opportunities in the European medical cannabis market.

8 Mistakes Businesses Make When Managing Product Labels: Part 1

By Rob Freeman
2 Comments

Editor’s Note: This article contains the first four common labeling mistakes that businesses can make. Click here to view the next four common labeling mistakes. 

Whether you’re a small business owner or a production manager of a large manufacturer, if you’ve ever experienced problems with your product labels you know it can quickly turn into a serious issue until that problem is resolved. From the time it’s applied to your product all the way to the POS (Point of Sale), labels always seem to be the least significant part of the production process- until something goes wrong. And when it does go wrong, it can create major branding issues and cost your company tens of thousands of dollars due to hefty supply chain late penalties and/or even government fines.

This article aims to provide insight as to how a company like Label Solutions Inc. helps businesses and manufacturers create new labels for their products as well as what to look for should you experience label failure at your retail locations. Topics discussed in this article do not cover all possible issues, but these common mistakes will hopefully help you better understand how creating a product label works, and how to possibly prevent your own problems in the future.

Mistake #1: Not Understanding the Importance Between the “Construction” Versus the “Artwork & Compliance” of the Label

This may seem like common sense, but it is often overlooked. Especially when dealing with fast-track projects.

Construction of the Label is the material selected and production process to produce the label. When creating a new label from the ground up, it is important to factor in how your product will be produced, necessary shipping and supply chain needs, how it is stored in inventory and how it will be presented at the POS. Understanding what environments your product will be exposed to throughout its life cycle will give you an advantage when approving substrate material, inks, and the strength of adhesive that might be necessary for your application.

The Artwork & Compliance of the Label refers to the overall design of the label, artwork, customer messaging, bar codes and regulatory requirements you need to follow in order to avoid serious government fines that might relate to your industry (Referring to agencies such as OSHA, DOT, and the FDA).In most cases the construction of the label does not apply to the compliance of the label.

Most label providers do not have the in-house expertise to offer compliance assistance. Although it is still the manufacturer who is liable for all final artwork approvals on their product, label providers that do offer advisory services can help update label content when regulatory changes are enacted. This “safety net” can save your company from extra production costs and, potentially, excessive legal time and material costs. In short, you should always review final label artwork approvals with your compliance team and/or legal expert, but it never hurts to have a “safety net” to help eliminate unnecessary orders or production delays.

In most cases the construction of the label does not apply to the compliance of the label. An exception to this statement would be industries such as the electronics industry that use UL (Underwriter Laboratories) labels that must meet UL specifications and be produced under recognized UL files. In other words, the compliance of a UL label is the construction of the label.

Best Method Approach: An excellent example of companies that understand the difference between the Construction vs. Artwork & Compliance of the label would be the compressed gas industry. Gas suppliers and distributors require long term regulatory compliant labels on their cylinders and micro-bulk tanks. These gas tanks are used in a wide variety of industries such as for manufacturing, welding, medical procedures, and specialty gas mixes for the micro-electronics industry.

The compressed gas industry requires that their labels follow strict, up-to-date OHSA and DOT compliance requirements. As for the construction of the label, it is common practice that the label remains legible on the cylinder for an average of five years. The 5-year duration is due to the millions of tanks that are in circulation throughout the US and Canada. What’s more, each label is produced to adhere to the cylinder’s metal surface during extreme outdoor weather conditions such as fluctuating temperatures, freezing rain, high winds, and direct sunlight year-round.

Mistake #2: Applying Labels Incorrectly to Your Products

Whether the label is applied to the product surface by hand or automatically with a label applicator, the label itself may not be applied level or evenly. Besides this being a major branding issue, this could also affect how the bar codes are scanned and could eventually impact your delivery times while trying to correct a batch.

Best Method Approach: There are construction alternatives that you can choose from to potentially reduce the impact of incorrect label application. For example, products with certain label adhesives allow your production team to reposition the label within a few minutes before the tack completely sets to the surface. The type of surface (cardboard, metal, plastic, glass, etc.) and the type of adhesive will determine how much time your production team will have before the tack sets.

The best practice is to apply labels prior to filling the bottles and cans as opposed to filling first and then applying the label in your production line.A good example of this best practice can be seen in the beverage market. Whether the client produces a uniquely crafted beer, or a rare ingredient infused into a new health drink, labels that are auto-applied to bottles and cans will sometimes experience equipment tension issues that need to be recalibrated. Once labels are applied off-alignment, a delayed tack setting can allow the label to be quickly repositioned by hand when needed. The best practice is to apply labels prior to filling the bottles and cans as opposed to filling first and then applying the label in your production line. The reason, excess spillage from filling can interfere with most adhesives.

This same repositionable adhesive is excellent to keep in mind for large equipment production assembly lines that apply prime (branding) labels and warning labels by hand. Even with large wide-format labels, the adhesive tack can be formulated so your employees have a few minutes to adjust, straighten, and smooth away trapped air bubbles once it has been placed on the surface. Knowing you have this option can help reduce label inventory waste, additional production material wastes and avoid delaying production time. More importantly, this option keeps your brand and your warning/instructional labels looking fresh.

Mistake #3: Not Sharing Your Production Run Schedules with Your Label ProviderSupply chain management (SCM) models are excellent examples of the best approach.

Some of Label Solutions’ largest accounts have the most efficient real-time tracking supply chain models in North America, but even they cannot avoid sudden increased orders for their products stemming from high customer demand or similar issues. It is a good problem to have, but it is a problem, nonetheless. Manufacturers utilize supply chain management tools to notify their suppliers of their monthly order forecasts, which in turn helps suppliers manage their materials and deliveries more efficiently.

On the other side of the spectrum, when small businesses share their production schedules with a supplier it means that both parties (the manufacturer and label provider) understand when to expect higher or lower order quantities each month. Label providers should back date their label production schedules, so they have the materials available to handle your busier months while ensuring on-time deliveries.

Best Method Approach: Supply chain management (SCM) models are excellent examples of the best approach. Although SCM’s are designed for scalability and real-time tracking, the benefit to you also helps your label supplier. For example, our large retail and industrial manufacturing clients notify the Label Solutions team to produce their labels according to their Supply Chain portal demand schedules. This, in turn, allows label suppliers to allocate production time and materials more efficiently for your last-minute rush orders.

Smaller companies can take a much more simplified approach (without the SCM tracking) to help their suppliers manage their orders – even if they do not use supply chain management. A simple Excel report of production runs over a 12-month time frame is ideal. If your label provider does not already practice this or similar methodology, it might be time to start looking for a more proactive label provider. If you’re unsure you want to share your information, then you might consider requiring your label provider to sign an NDA (Non-disclosure Agreement).

Mistake #4: Not Accepting Alternative Sizes of the Label to Allow for Better Pricing

If your product needs a label with, for example, a dimension of 5.25 X 6.75 inches, there might be a much better price point offered to you if you’re open to switching to a slightly different dimension label of, say, 5 X 7 inches.  Obviously, you need to make sure the new dimension would fit your product(s) and work with your production line. But, if alternate dimensions are within the scope of the project, a modified SKU could potentially cut down on cost and production time.

Best Method Approach: You might not have the time or ability to change your label if you already market that product in retail stores. But, if you are changing your branding, creating a new style of label, or releasing a completely new product, this is the ideal time to consider implementing better continuity between your products. This could include elements such as matching colors and label/packaging design.

In addition to updating your SKU’s, this might also be an opportunity for your company to consolidate multiple products onto a universal label size. By applying the same sized labels to multiple SKU’s, you can increase efficiency regarding repeated label orders, especially for label printers that use digital printers. Combine this approach with your expected annual quantity estimates and you’ll be positioned for very efficient ordering options as your company grows.

Editor’s Note: We’ll cover the next four most common labeling mistakes in Part Two coming next week. Stay tuned for more!