Aurora has just faced a rare setback in Europe. The Italian government has cancelled one of three tender cultivation lots to supply Italian patients it granted Aurora this summer (in July).
Aurora was the only company to win the bid after other companies were disqualified.
For this reason, the high-level parliamentary attention to the bid this fall is even more interesting. Most foreign cannabis is being imported from the Netherlands and Bedrocan. While Wayland (ICC) and Canopy are in the country (Wayland has established production facilities for CBD in fact), Aurora was the only foreign Canadian cannabis company to actually win government issued, cultivation slots.
What Is Going On?
In July, Aurora won the Italian bid, beating out all other companies for all three lots.
Yet in September, the third lot, for high-level CBD medical flower, was cancelled by the Ministry of Defense which oversees cannabis importing and production, for an odd reason. Specifically, the lot was suddenly “not needed.”
As of October 31, the Minister of Health responded to parliamentarians who wondered about this administrative overrule by saying that the rejected lot (lot 3, for high-level CBD) was in fact rejected because stability studies to define the shelf life of products were not being conducted.
EU GMP Standards Are In The Room In Europe
This is not really a strange turn of events for those who have been struggling on the ground in ex-im Europe to learn the rules.
For at least the second time this year, and possibly the third, a national European government has called stability tests and the equality of EU-GMP standards into question. As Cannabis Industry Journal broke earlier this fall, the Polish government apparently called the Dutch government into question over stabilization tests (albeit for THC imports) during the February to September timeframe.
It is still unknown if there is any connection between these two events although the timing is certainly interesting. Just as it was also interesting that both Denmark and Holland also seemed to be in sync this summer over packaging and testing issues in July.
Aurora and Bedrocan are also the two biggest players in the Polish market (although Canopy Growth as well as other international, non-Canadian cannabis companies are also making their mark).
What is surprising, in other words, is that countries all around Germany are suddenly asking questions about stability tests, but German authorities, still are notably silent.
Why might this be? Especially with German production now underway, and imports surging into the market?
Is This A Strange EU-Level CBD Recreational Play In Disguise?
There are no real answers and no company is talking – but in truth this is not a failure of any company on the ground, rather governments who set the rules. If there are any cannabis companies in the room at this point who are not in the process of mandating compliance checks including stability tests, it is the governments so far, who have let this stand.
Notably, the German government. Nobody else, it appears, is willing to play this game.
Further however, and even more interestingly, this “cancellation” also comes at a time when novel food is very much in the room in Italy. Namely, it is now a crime to produce any hemp food product without a license. There is no reason, in this environment, why a national cultivator could not also produce locally a high-quality, high-CBD product for the nascent Italian medical market.
While nobody is really clear about the details, there is one more intriguing detail in the room. The government may, in fact, allow medical cultivation now by third parties.
Across the country and across the world, governments that legalize cannabis implement increasingly rigorous requirements for laboratory testing. Helping to protect patients and consumers from contaminants, these requirements involve a slew of lab tests, including quantifying the levels of microbial contaminants, pathogens, mold and heavy metals.
Cannabis and hemp have a unique ability to accumulate elements found in soil, which is why these plants can be used as effective tools for bioremediation. Because cannabis plants have the ability to absorb potentially toxic and dangerous elements found in the soil they grow in, lab testing regulations often include the requirement for heavy metals testing, such as Cadmium, Lead, Mercury, Arsenic and others.
In addition to legal cannabis markets across the country, the USDA announced the establishment of the U.S. Domestic Hemp Production Program, following the enactment of the 2018 Farm Bill, essentially legalizing hemp. This announcement comes with information for hemp testing labs, including testing and sampling guidelines. While the information available on the USDA’s website only touches on testing for THC, required to be no greater than 0.3% dry weight concentration, more testing guidelines in the future are sure to include a discussion of heavy metals testing.
Table 1. ICP-MS operating conditions (shaded parameters were automatically optimized during start up for the HMI conditions).
In an application note produced by Agilent Technologies, Inc., the Agilent 7800 ICP-MS was used to analyze 25 elements in a variety of cannabis and hemp-derived products. The study was conducted using that Agilent 7800 ICP-MS, which includes Agilent’s proprietary High Matrix Introduction (HMI) system. The analysis was automated by using the Agilent SPS 4 autosampler.
Instrumentation
The instrument operating conditions can be found in Table 1. In this study, the HMI dilution factor was 4x and the analytes were all acquired in the Helium collision mode. Using this methodology, the Helium collision mode consistently reduces or completely eliminates all common polyatomic interferences using kinetic energy discrimination (KED).
Table 2. Parameters for microwave digestion.
As a comparison, Arsenic and Selenium were also acquired via the MassHunter Software using half-mass correction, which corrects for overlaps due to doubly charged rare earth elements. This software also collects semiquantitative or screening data across the entire mass region, called Quick Scan, showing data for elements that may not be present in the original calibration standards.
SRMs and Samples
Standard reference materials (SRMs) analyzed from the National Institute of Standards and Technology (NIST) were used to verify the sample prep digestion process. Those included NIST 1547 Peach Leaves, NIST 1573a Tomato Leaves and NIST 1575 Pine Needles. NIST 1640a Natural Water was also used to verify the calibration.
Figure 1. Calibration curves for As, Cd, Pb, and Hg.
Samples used in the study include cannabis flower, cannabis tablets, a cannabidiol (CBD) tincture, chewable candies and hemp-derived cream.
Sample Preparation
Calibration standards were prepared using a mix of 1% HNO3 and 0.5% HCl. Sodium, Magnesium, Potassium, Calcium and Iron were calibrated from 0.5 to 10 ppm. Mercury was calibrated from 0.05 to 2 ppb. All the other elements were calibrated from 0.5 to 100 ppb.
Table 3. Calibration summary data acquired in He mode. Data for As and Se in shaded cells was obtained using half mass correction tuning.
After weighing the samples (roughly 0.15 g of cannabis plant and between 0.3 to 0.5 g of cannabis product) into quartz vessels, 4 mL HNO3 and 1 mL HCl were added and the samples were microwave digested using the program found in Table 2.
HCI was included to ensure the stability of Mercury and Silver in solution. They diluted the digested samples in the same acid mix as the standards. SRMs were prepared using the same method to verify sample digestion and to confirm the recovery of analytes.
Four samples were prepared in triplicate and fortified with the Agilent Environmental Mix Spike solution prior to the analysis. All samples, spikes and SRMs were diluted 5x before testing to reduce the acid concentration.
Calibration
Table 4. ICV and CCV recovery tests. Data for As and Se in shaded cells was obtained using half mass correction tuning.
The calibration curves for Arsenic, Cadmium, Lead and Mercury can be found in Figure 1 and a summary of the calibration data is in Table 3. For quality control, the SRM NIST 1645a Natural Water was used for the initial calibration verification standard. Recoveries found in Table 4 are for all the certified elements present in SRM NIST 1640a. The mean recoveries and concentration range can also be found in Table 4. All the continuing calibration solution recoveries were within 10% of the expected value.
Internal Standard Stability
Figure 2 highlights the ISTD signal stability for the sequence of 58 samples analyzed over roughly four hours. The recoveries for all samples were well within 20 % of the value in the initial calibration standard.
Figure 2. Internal standard signal stability for the sequence of 58 samples analyzed over ~four hours.
Results
In Table 5, you’ll find that three SRMs were tested to verify the digestion process. The mean results for most elements agreed with the certified concentrations, however the results for Arsenic in NIST 1547 and Selenium in both NIST 1547 and 1573a did not show good agreement due to interreferences formed from the presence of doubly-charged ions
Table 5. Mean concentrations (ppm) of three repeat measurements of three SRMs, including certified element concentrations, where appropriate, and % recovery.
Some plant materials can contain high levels of rare earth elements, which have low second ionization potentials, so they tend to form doubly-charged ions. As the quadrupole Mass Spec separates ions based on their mass-to-charge ratio, the doubly-charged ions appear at half of their true mass. Because of that, a handful of those doubly-charged ions caused overlaps leading to bias in the results for Arsenic and Selenium in samples that have high levels of rare earth elements. Using half mass correction, the ICP-MS corrects for these interferences, which can be automatically set up in the MassHunter software. The shaded cells in Table 5 highlight the half mass corrected results for Arsenic and Selenium, demonstrating recoveries in agreement with the certified concentrations.
In Table 6, you’ll find the quantitative results for cannabis tablets and the CBD tincture. Although the concentrations of Arsenic, Cadmium, Lead and Cobalt are well below current regulations’ maximum levels, they do show up relatively high in the cannabis tablets sample. Both Lead and Cadmium also had notably higher levels in the CBD tincture as well.
Table 6. Quantitative data for two cannabis-related products and two cannabis samples plus mean spike recovery results. All units ppb apart from major elements, which are reported as ppm.
A spike recovery test was utilized to check the accuracy of the method for sample analysis. The spike results are in Table 6.
Using the 7800 ICP-MS instrument and the High Matrix Introduction system, labs can routinely analyze samples that contain high and very variable matrix levels. Using the automated HMI system, labs can reduce the need to manually handle samples, which can reduce the potential for contamination during sample prep. The MassHunter Quick Scan function shows a complete analysis of the heavy metals in the sample, including data reported for elements not included in the calibration standards.
The half mass correction for Arsenic and Selenium allows a lab to accurately determine the correct concentrations. The study showed the validity of the microwave sample prep method with good recovery results for the SRMs. Using the Agilent 7800 ICP-MS in a cannabis or hemp testing lab can be an effective and efficient way to test cannabis products for heavy metals. This test can be used in various stages of the supply chain as a tool for quality controls in the cannabis and hemp markets.
Disclaimer: Agilent products and solutions are intended to be used for cannabis quality control and safety testing in laboratories where such use is permitted under state/country law.
On Wednesday, November 6th, the number of licenses suspended dropped to a total of 385, including 63 retailers, 61 delivery services, 47 microbusinesses, 185 distributors and 29 transportation licenses. That’s almost 5% of all the cannabis business licenses in California.
According to Alex Traverso, spokesman for the BCC, licensees were given plenty of opportunities to fix their errors. Businesses were given notice that they needed to enroll in Metrc within five days following their provisional licensing. The BCC gave those businesses a reminder roughly three months ago and sent an additional warning in late October regarding the deadline.
It’s a relatively easy fix for those trying to get back in compliance. The rationale behind suspending the licenses is that those businesses need to undergo a mandatory traceability system training so they know how to use Metrc and get credentialed. Enroll in the Metrc system, get credentialed and your license should be restored.
“It’s relatively simple to get your license out of suspension,” Traverso told KPBS News. “These are growing pains. I think we knew it was going to be a process and it was going to take some time, and that it was going to be an adjustment period for a lot of people who have been doing things one way for some time now.”
Traverso added that about 80 businesses enrolled in the Metrc system as soon as they received the notice that their license is suspended. Those licenses should be restored to active shortly, Traverso said.
The German city of Bremen (perhaps you know it from the Brothers Grimm and the animal musicians) is determined to force the federal German government to play another tune when it comes to basic access within the city.
For those without the special geographic knowledge that comes with being a “local” this is also a deliberately strategic political move. Bremen, like Berlin, is a strange German hybrid, a city-state.
Change here, of course, like Berlin, would have wide impact on other German states.
It is not a new campaign of course. None of these city campaigns for home-grow really are. They are the result of efforts, at this point with elected officials involved, of literally decades of patient activists, who are still necessary. But this time, they have politicians involved. When the national ones don’t listen, the local ones are being dragged in.
That said, don’t expect any breakthroughs or miracles from Bremen or Berlin either right now for that matter. This experiment, in Bremen just like the country’s capital, is still at least several years off, no matter its regular recycling in news stories for the last several years.
The German city of Bremen Image: Chaim Dönnewald, Flickr
Politically right now it is hard to understand the CDU’s continued reluctance to embrace the weed. The CDU is Germany’s strongest and largest “middle of the road” party. Particularly because they along with everyone else of alternative political persuasions are highly alarmed by the right wing AfD’s popularity and spread. It is not inconceivable that even Germany’s largest if not highly beleaguered party might use a little cannabis to stop that. And they are being pushed, hard now, by the fringes.
The Outpricing Of The Patient Movement
Talk to any cannabis-connected company right now and chances are you will hear the phrase “patient first.”
That means nothing in an environment where most patient groups are kept out of the room when legislation opening markets is being written (certainly in Europe). And of course, it is precisely the individuals that these groups represent who cannot afford the legal medication hitting the markets early.
Here, because of the focus on high-quality, GMP-certified product, the chances of a patient collective actually being able to afford a cultivation license (for example) are so far non-existent.
As a result, there is an active foment on the ground right now in almost every country in Europe. This is meeting other kinds of frustration right now and that can be a powerful weapon for change. However, without funded lobbyists in most European capitals and Brussels, there is more power and money behind the established industry right now to keep the (almost) status quo.
As strange as they seem to the cannabis industry right now, GMP certification is a standard pharmaceutical designation.
The boogeymen in the room right now, in other words, for every strong patient group, with its own grey market distribution channels, are the well-funded companies who are in fact getting the laws to change.
Patients, in these environs, as well as their concerns, are left out entirely.
The Strength of The European Gray Market
For this very reason, the gray market problem is going to be large in Europe for quite some time to come. Patients are effectively priced out of the legitimate market if they cannot get insurer approvals and for most that is still the biggest problem in the room.
Are there large gray market grows all over Europe? Yes. As one German activist told Cannabis Industry Journal recently, echoing the comments and practices of thousands of others, “Yes, they made me jump through the hoops, and I have packaging from all the big guys. That’s how I carry my home grow these days.”
Forget “patient cards” that some enterprising distributors are trying to get patients to carry.
The cops don’t challenge legit packaging. And every producer, distributor and patient knows that. Buy once, no matter how exorbitant, and that is all she wrote.
For that reason, “patient numbers” if not “sales” actually mean very little.
It does not matter, in other words, if a cannabis company announces its market entry in any country right now. What matters is that they can prove consistent supply and sales and real patient numbers – which if GDPR (European privacy legislation) is strictly followed, producers and distributors should never really know at a level that such sales are trackable per patient.
And that is where this all gets difficult down in the weeds.
Are there large gray market grows all over Europe? Yes. Are they all under the purview of the criminal black market? No. There are very organized patient non-profit networks locally in just about every city and town in Europe. If not other places.
And, where those fail, certainly in Germany, there is always the area around every local train station. If you are hard up enough and desperate enough, skunk and hash albeit of an indeterminate source, will cost you about $12 per gram.
There is no cannabis company in the room anywhere in Europe that can provide legit product via any pharmacy, for that price at point of sale. Yet. And therein, as always, lies the rub.
No matter what type of packaging you select for your cannabis product, it needs to be dependable. Packaging is not only the first impression of your company to consumers; it must securely contain and protect the product inside. No one wants to purchase products inside packaging that looks dirty or isn’t sealed properly – it is imperative that packaging looks clean and safe to consumers. How does your cannabis packaging stack up? Is it sealed properly? Is it clean and defect-free? Does it conform to the ever-changing regulations?
Using plastic bottles and closures is a great way to secure your cannabis product and showcase your brand. Plastic cannabis packaging offers many different options: bottles can be produced using sustainable materials and come in many different shapes and capacities. Typical closures are child-resistant, lined or unlined, and with a text or pictorial top.
Because packaging performs so many functions for your cannabis business, it is important to realize that not all plastic bottles and closures are the same. High density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP) and polyethylene terephthalate (PET) bottles and closures are widely used for cannabis packaging. Keep in mind that bottle selection is only half of the equation. Equally important is selecting a closure that works with the bottle and has the right features you need.
So, how do you select the right plastic closure for your cannabis bottles? Your packaging manufacturer should be able to guide you towards the solution that’s right for you. However, there are several key factors that will help you identify a superior packaging solution.
Closure Seal
Unevenly manufactured bottle tops can result in poor closure seals and an increased risk of product contamination. Choosing the incorrect lining material can lead to poor protection of your product or may not provide the proper tamper evidence required by regulatory agencies.
A bad seal can also jeopardize the freshness of your cannabis product. It can cause the flower to become excessively dry, resulting in overfilling to make up for weight loss. Situations like these can lead to higher product costs for your company.
Child-Resistant
What’s more important than keeping cannabis out of the hands of children? Child-resistant (CR) packaging not only increases safety; it instills consumer trust in your products and your brand. A closure that doesn’t fit the bottle can prevent the bottle and closure from working properly together, leading to possible accidents if the product is around children. CR closures are available in many different styles and functions – from traditional push-and-turn systems to snap caps and more.
Individual states are cracking down on child-resistant packaging certification for cannabis products. Although FDA approval is not currently required, it will be in the future. Be a leader in the cannabis industry and make preparations now to be compliant with future regulations.
Senior-Friendly
Closures can be child-resistant and at the same time be senior-friendly. Select closures that enable use by individuals who may have problems opening traditional capping systems. Innovative companies are designing closure systems that can be both safe for children as well as easy-to-open for those who have difficulty using their hands.
Compatible Bottles
Be sure that the closure you select works correctly with your chosen bottle. Can your packaging partner manufacture and supply closures that guarantee complete functionality with the bottle to protect your product? Closures produced by the same manufacturer as the bottles will ease your mind that the closure and bottle function correctly together. A one-stop-shop approach will also save you time and money.
Country of Origin
Is the packaging you use manufactured in the United States? Plastic bottles and closures manufactured overseas may have impurities in the resin or colorant that could leach or bleed into your cannabis products. They may not have documentation of origin or comply with FDA regulations. Your cannabis packaging partner should be able to provide this documentation so you can rest assured that your bottles and closures are manufactured under strict guidelines for the safety of your consumers and that your product won’t be affected. In today’s emerging cannabis market, there are stringent regulations on all types of cannabis packaging. If you use packaging that does not conform to regulations, you are putting your company at risk for product recalls, decreased sales due to low consumer confidence and other undesirable risks.
Selecting poor closures and bottles for your cannabis packaging can have long-term consequences. Not only will your brand be diminished, but your profitability will be reduced as well. Understanding how to identify the characteristics of quality plastic packaging that can help you avoid declining consumer confidence and lost sales. Work with a plastic packaging manufacturer that understands how important perfect quality is to your business.
You have read the press releases. You may have heard about such ideas at a recent cannabis conference in and around the EU of late. Or you may have encountered new distributors coming into the game with a German presence and a decidedly interesting ex-im plan that sounds a bit, well, off the map.
No matter how geographically creative some of these plans are, the problem is that many of these ideas literally do not make economic sense. Either for the companies themselves (if not their investors), and certainly not for patients. Not to mention, truth be told, the looming price sensitivity issues in the European market that North Americans, for starters, seem to still just be waking up to.
Some Recent Examples….
Yes, exports from Denmark have been much in the news lately (including into both Germany and Poland). Truth be told, however, this makes about as much sense, economically, as importing ice to eskimos. Why? Denmark, for all its looser regulations and less-uptight approach to the cannabis discussion generally, is one of the most expensive labour markets in Europe. Fully automated production plants are one thing, but you can build those in other places too. Especially warmer climates, with lots of sunshine. German production, as it comes online, will also make this idea increasingly ludicrous.
Who on earth got on this bandwagon? It seems that the enthusiasm in the room began when Denmark began to import to Germany (where the disparities in wages in production are not so noticeable). However, lately, several Canadian companies with a Danish footprint have been eying Poland of late.
And on that particular topic – there are many who are doing the math and trying to figure out, as the alternatives get going, if even Canada makes much sense, or will in a few years.
Low Wage Markets With Sunshine Are Hotspots For European Cannabis Production
Like it or not, the European market is extraordinarily price sensitive – namely because it is not “just” consumers called patients picking up the tab but health insurance companies demanding proof of medical efficacy.
That starts, a bit unfortunately, with understanding wage economics across Europe. The warmer the climate, in other words and the further east on the map, wages drop precipitously. That is “good” for an industry looking to produce ever cheaper (but more compliant) product.
It is also good, at least politically, for countries whose elected leaders are being forced to admit that cannabis works, but are less than copacetic about encouraging local production. See Germany for starters, but places like Austria, Poland and most recently France (which has just embarked on a first of its kind medical cannabis trial).
Here, no matter the temporary buzz about Denmark, are the places that cannabis production makes sense:
Portugal: The country is a newcomer in the cannabis discussion this fall, although in truth, the seeds of this reality were sown several seasons ago when Tilray began to build its production plant in the country in 2017. They are far from the only company who has seen the light, and these days, farmers are getting hip to the possibilities. Especially if they are already exporting crops throughout Europe.
Spain: The industry that can afford GMP certification is getting going, but everyone else is stuck in a limbo between pharmaceutical producers and the strange gray market (see the patient clubs in Barcelona). That said, political groups are beginning to discuss cultivation as an economic development tool, if not sustainable food and medication strategies.
Greece: The weather is warm, and the investment climate welcoming. Of all the countries in the EU, Greece has embraced the economic possibilities that cannabis could bring. How that will play out in the next years to come is an intriguing story.
Italy: The southern part of the country in particular is ripe for cannabis investment and it’s full of sunshine. However, as many have noted, organized crime in this part of the world is a bit fierce and starts with the letter M.
Malta: The island is a comer, but does importing cannabis from here really make economic sense? There are trade routes and economic treaties tying the island both to the apparently Brexiting British and Europe. Why not, right? Just remember that along with labour, transportation costs are in the room here too.
And Just Outside The EU…
The country now (sort of) known as North Macedonia and struggling to get into the EU if France would just get out of the way is also going to be a heavyweight in this discussion for years to come. Wages, of course, will increase as part of EU membership, but in general, this country just north of Greece is going to play a highly strategic role in exports throughout Europe.
One of the surest ways to understand that you are entering not just another country, but what is called an “emerging market” is when you travel from Germany to Poland by train.
There is only one “intercity” option from Berlin Hauptbahnhoff – a far cry from the modern, internet-connected, fast ICE trains that go West. This line is run by the Poles. By the time you reach Warsaw five hours later, however, it is clear at least some parts of this country are booming. The skyscraper construction in the center of town rivals London and Berlin.
Like every emerging market, there are vast disparities in wealth and income, if not opportunity here. And into this discussion, now is coming the entire cannabis discussion. Visiting, as an American, in particular, one is reminded of a city that could be East Berlin 15 years ago.
As a cannabis journalist, it feels, from this perspective, like every American state in the 1990’s. Reform is on the tip of everyone’s tongue. But not quite realized yet, except for a few elites. Beyond such realities which are common in the world of cannabis, how very, well, Iron Curtain.
The difference of course, these days, is that the conversation next door in Germany, as well as other places, is finally forcing the Polish government to face reality. But it is clear, from interviews with activists and patients in particular, as well as the nascent newcomers from abroad testing the cannabis waters, that this fight is not going to be easy on the ground.
Then again, when and where has it ever been?
The Patients….
As always, real reform and market opening is driven by the sheer numbers of sick people who brave arrest to gain access to the plant. Some do it for themselves. Many do it for their children (of all ages). An elderly, boomer couple who talked to Cannabis Industry Journal about their ordeal also see it as a form of justified struggle. And Poles are no strangers to that, far from the cannabis kind.
That ethic is much in the room among the nascent industry that is also struggling to find respect. The Polish side of the discussion is looking at hemp. And growing THC illicitly, just like elsewhere.
But the budding movement here is highly organized, including on the business end, with hundreds of thousands of members. How this translates into a legal industry (besides media and hemp products) is of course, still up for grabs.
That is very much in the minds of those who brave the struggle daily. The patient collective in Warsaw is also highly organized – providing free and non-profit product to those most in need. It is an impressive operation. And further one that is increasingly distrustful of foreigners seeking “market share.” If not the already floating “suits.” Just knowing how to speak Polish, as the activists are, at least realizing, is not a guarantee that they will not be dealing with cannasharks only interested in their contacts and mailing lists. Patients over profits is a phrase you hear a lot here. This has nothing to do with not wanting to support a legit, safe industry. But when you are poor, you find ways to improvise. Including getting your medication.
The Foreign Companies…
Aurora and Canopy Growth are already in the room and there are other Canadians lining up to follow. However, these two are the only ones so far who have been able to get their products registered locally and even then, availability is still in the offing.
These are also highly expensive products. And do not begin to compete with producers now eying the Polish market from North Macedonia and the rest of Eastern Europe.
The foreign companies, in other words, are already broadly falling into two camps. North American curiosity seekers (at this point), and companies, mostly from the East and South, who are looking to Poland to be the “next Germany.” Especially because their product is so price and geographically convenient.
A Battle For Poland’s Emerging Market
It is clear that at least the Canadian companies are already lining up against more home grown and patient interests. Just as what happened in Germany and the rest of Europe so far. And not even on purpose, but more on matters of price.
Like other pre-commoditized markets, the Polish industry is still trying to be (relatively) equal and fair, as much as there is a huge amount of positioning already just below the surface. Everyone is tired of struggling. Dreams of cannabis riches are enticing just about everywhere.
Of course, add to that, patients are dying here, and that always sets the tone – especially when only the richest and lucky few can afford to access the drug through legitimate channels. Face pain, unpleasantness or death or buy in the black market? For the Polish industry on the forefront of the debate, in other words, the stakes are high, the government is moving glacially, and those on the ground are organizing to meet the winds of change.
Foment for another kind of Green Perostroika? Perhaps.
There will, almost certainly as a result of these forces, be a call for a Polish bid – and further one that allows for local producers to enter the medical market.
But the bottom line is that this strange, and exciting and certainly new market is going to be as volatile, and wild west as any in Europe for the immediate future. Expect interesting things, if not more of the same.
Secretary Perdue made the announcement in a YouTube video titled “USDA’s Hemp Policy.” Later in the week, an interim final rule formalizing the program will be published in the Federal Register, according to the USDA’s website. “The rule includes provisions for the U.S. Department of Agriculture (USDA) to approve hemp production plans developed by states and Indian tribes including: requirements for maintaining information on the land where hemp is produced; testing the levels of delta-9 tetrahydrocannabinol; disposing of plants not meeting necessary requirements; and licensing requirements,” reads the press release. “It also establishes a federal plan for hemp producers in states or territories of Indian tribes that do not have their own approved hemp production plan.” The interim final rule will go into effect as soon as it is published in the Federal Register, which should be by the end of this week.
You can find a preview of the rule here. The agency has also developed guidelines for sampling and testing procedures, which you can find here. Those documents are meant to provide more information for hemp testing laboratories.
You can watch the YouTube video and read the announcement he made below:
Hello everyone, as I travel across this great country of ours, I hear a lot about a strong interest in a new economic opportunity for America’s farmers: the production of hemp. Which is why today I am pleased to announce the USDA has published the rule establishing the US domestic hemp production program. We said we’d get it done in time for producers to make planning decisions for 2020 and we followed through. We have had teams operating with all hands-on-deck to develop a regulatory framework that meets Congressional intent while seeking to provide a fair, consistent and science-based process for states, tribes, and individual producers who want to participate in this program. As mandated by Congress, our program requires all hemp growers to be licensed and includes testing protocols to ensure that hemp grown under this program is hemp and nothing else. The USDA has also worked to provide licensed growers access to loans and risk management products available for other crops. As the interim final rule, the rule becomes effective immediately upon publication in the federal register. But we still want to hear from you. Help us make sure the regulations meet your needs. That’s why the publication of the interim final rule also includes a public comment period continuing a full and transparent rulemaking process that started with a hemp listening session all the way back in March 2019. At USDA, we are always excited when there are new economic opportunities for our farmers and we hope the ability to grow hemp will pave the way for new products and markets. And I encourage all producers to take the time to fully educate themselves on the processes, requirements and risk that come with any market or product before entering this new frontier. The Agricultural Marketing Service will be providing additional information, resources and educational opportunities on the new program. And I encourage you to visit the USDA hemp website for more information. As always, we thank you for your patience and input during this process.
Project Yosemite, a cannabis product innovation and brand development company, announced earlier this month the appointment of Jennifer Raeder-Devens as their new Chief Scientific Officer. Raeder-Devens is a veteran of the MedTech industry, working for companies like Becton Dickinson, Cardinal Health, Medtronic and 3M.
Prior to joining Yosemite, she was the Vice President of Research & Development at Becton, Dickinson, where she oversaw product development and technology strategies to launch infection prevention products including the ChloraPrep first-in-the-US sterile solution patient preoperative topical antiseptic. She was previously the Vice President of R&D, Strategy and Innovation at Cardinal Health. She’s also held roles at Medtronic, 3M Drug Delivery Systems and 3M Skin Health Division and she has a number of patents in drug delivery and medical devices.
Jennifer Raeder-Devens, Chief Scientific Officer at Project Yosemite
In November of 2018, Project Yosemite launched their first product, OLO, which is an infused, controlled-release sublingual strip. Part of Raeder-Devens’ new role at the company is the continued development and expansion of the OLO sublingual strip technology platform. Andrew Mack, CEO and founder of Project Yosemite, says he’s thrilled to have Raeder-Devens on the team. “Jennifer is an extremely accomplished scientist and engineer with extensive experience driving innovation and R&D in the pharmaceutical and medical device industries,” says Mack.
We caught up with Jennifer over the phone to talk about her background in the MedTech space, why she decided to jump ship to join the cannabis industry and what she’s excited to work on now.
Cannabis Industry Journal: Can you tell us about your background, including your work with 3M and Medtronic?
Jennifer Raeder-Devens: I’m coming directly from Becton Dickinson, a global med tech company, where I supervised the development of drug-device combination products for topical antiseptics. I spent about 10 years there, mostly in topical drug and combination product development. Prior to that, I was at 3M and Medtronic working in drug-device combination products. At 3M, I was supervising a team of technology developers for the 3M Drug Delivery Systems business. I had experience working with designing and manufacturing transdermal, nasal, buccal and inhalation drug delivery mechanisms for pharmaceutical partners.
I worked on implantable drug delivery systems at Medtronic, which included working on the biocompatibility of things like pacemakers and drug infusion pumps and optimizing them to reduce infection and enhance healing after the implantation procedure.
CIJ: What made you consider joining the cannabis industry?
Jennifer: With my work in topicals, transdermal and inhalation drug delivery, I had an easy understanding of the different routes of administration we see today in the cannabis industry. And so, from the technology standpoint, I thought this was a place I could contribute to immediately. And then what got me really excited about it was thinking about cannabis, and just like any other drug, with oral drug delivery, you’ve got first class metabolism and side effects from the 11-Hydroxy-THC that are undesirable and you’d rather not have delivered through the gut.
OLO sublingual strips have a 10-minute onset time
I got excited when I saw the development of things like sublingual strips that were focusing on alternatives to smoking that would preserve that relatively fast onset and mitigate some of the side effects of edibles.
The other thing I really like about the cannabis industry: Previously I have been very focused on known drugs that are already approved and repurposing them into a new delivery system. What really interests me about the cannabis industry is the active cannabinoids and terpenes are somewhat known and somewhat unknown, so there is this really interesting challenge there of trying to separate the wheat from the chaff in terms of producing therapeutic effects.
It is a really interesting space where the indications of certain molecules are evolving along with the delivery technology. So, it is a really exciting and eye-opening way to take the next step in my career and have this wide-open space in front of me, both in terms of the different cannabinoids, their effects and the delivery systems we can use.
CIJ: How might you be prepared, given your background, for some of the challenges in the cannabis space?
Jennifer: I think the challenges in cannabis delivery are not different from the challenges in pharmaceutical drug delivery. It’s just that we have this additional complexity of the entourage effect. We can be engineering not just the main ingredient of THC, but also all the other cannabinoids and terpenes. So, for example, with my background in infection prevention, we build a product that we know reduces the risk of infection, but we are really challenged to actually prove it reduces the risk of infection. We have a similar situation in the cannabis industry, where we can get the THC, or CBG or CBN where we want it to go, but then we are really challenged to figure out how we can find, what we call in the pharmaceutical industry, a surrogate end point for efficacy, so that we can test that product and really believe that when we put the product on the market, even though we haven’t tested thousands of users or conducted large randomized clinical trials, that the effect will be shown. We are networking and partnering with a good scientific community to build the right product and do some testing at a small scale that really demonstrates the product achieves the effect that we are really looking for.
CIJ: Can you tell us a little about your new role with Project Yosemite?
Jennifer: My job description falls into three buckets: The first part is that we are forming a scientific advisory board and we are working with some of the leading cannabinoid researchers around the country and around the world. These are the people identifying whether or not certain cannabinoids could reduce cancer cell metabolism or whether cannabinoids contribute to weight loss or diabetes control and other things of that nature. We are trying to reach as far upstream as we can to grasp the emerging understanding of the performance of cannabinoids and terpenes in the endocannabinoid system. So, part of my job is to chair that scientific advisory board, get the thought leaders together in the room and have them bring their knowledge and explore with our own knowledge what cannabis can really do.
The OLO sublingual strips
I have worked in topical, transdermal, buccal, nasal, inhalation drug delivery. In the second bucket of my job, we are trying to understand a given indication or experience that our users want to have, what would be the right route for them. We are challenging our sublingual delivery mechanism to see how fast of an onset we can really get. Right now, we are at 10 minutes for drug delivery in sublingual and we are still trying to get an even faster onset time for the sublingual strip.
For other indications, like chronic pain, we may want to think about a sustained release, so sort of aligning the different indications with which different cannabinoids and terpenes will work for it and see which delivery platform will work for what we are trying to accomplish in each indication. So, we do not plan to remain solely a sublingual strip company, but will build out additional delivery platforms as we develop new indications.
Right now, we are working upstream with the growers and the processors to get cannabis oil and extracts. Some of the growers are working on different genetics in their cultivars to grow plants that have different ratios of different cannabinoids that we know from the emerging research will have an impact on people’s experience. Now we are working with growers to really get ahead of the curve on how to formulate products with various cannabinoids.
We have an R&D team in house that I supervise. We are always working with our production team to make small improvements such as the faster onset and the dissolution rate and things like flavors, which covers a downstream focus as well.
According to a press release published today, Aphria Inc. has implemented Rootstock Software’s cloud Enterprise Resource Planning (ERP) solutions and ComplianceQuest’s Enterprise Quality Management System (EQMS). Aphria, one of the largest cannabis companies in the world, trades on both the Toronto Stock Exchange and the New York Stock Exchange.
Rootstock’s cloud ERP software includes things like order processing, production management, supply chain management, lot and serial number trackability and traceability, compliance reporting, costing and financial management. ComplianceQuest’s EQMS software provides support for GMP compliance and can help improve efficiencies in operations. The EQMS focuses on quality and risk management across Aphria’s business platforms, from sourcing to manufacturing to supply chain management.
Aphria is using the entire EQMS platform, which includes software to handle documents, training, changes, inspections, nonconformance, corrective actions (CAPA) and customer complaints which integrates to Rootstock’s ERP. According to the press release, the company is currently working to roll-out audit, equipment, incident and supplier management functions and will be fully live with the entire quality system in the next few months.
According to Tim Purdie, chief information officer & chief information security officer of Aphria Inc., both platforms delivered on their implementation. “Grounded in the scalability of the force.com platform, CQ transformed our quality management operating capabilities overnight and we are delighted at the fully integrated partnership result,” says Purdie. “We now have fully digital real-time informatics and ability to implement change in a highly transparent manner to meet the demands of our high growth business.”
Adding that Rootstock ERP will help facilitate their company’s production, inventory and supply chain management, Purdie says both platforms will enable Aphria to be increasingly responsive to market needs. “Aphria is setting the standard as a worldwide leader in the cannabis industry through a diversified approach to innovation, corporate citizenship, strategic partnerships and global expansion,” Purdie says. “With these system implementations, we’re now technologically equipped to take our competitive advantage to new levels of market leadership.”
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
Yet in September, the third lot, for high-level CBD medical flower, was cancelled by the Ministry of Defense which oversees cannabis importing and production, for an odd reason. Specifically, the lot was suddenly “not needed.”
It is still unknown if there is any connection between these two events although the timing is certainly interesting. Just as it was also interesting that both Denmark and Holland also seemed to be in sync this summer over packaging and testing issues in July.
