Tag Archives: business

November 12, 2019

Doctors & Researchers Push Medical Efficacy Forward at 10th IACM

By Marguerite Arnold

It is easy to forget as one steps inside this world-class medical conference (held this year in Berlin), that cannabis is disputed as medicine anywhere in the world.

Inside a packed conference hall in an upscale hotel in East Berlin, international researchers presented evidence that when taken as a drug, this simple plant can make a world of difference to patients suffering from a range of illnesses.

There were also doctors who talked about prescribing this as medicine (even to children), with dramatic and affirming results (if not heart-warming pictures).

In sum, as always, the IACM is the best place to find facts if not evidence galore to convince even the most hard-boiled egghead that this drug works – and across a broad range of so far “other” drug-resistant medical conditions.

As a participant in the IACM said after the opening remarks on the very first morning, it is so easy to ask the question – “Why are doctors still so afraid of if not resistant to this drug?”

Medical efficacy is no longer an unanswered question…

For those seeking affirmation and evidence, this year’s IACM did not disappoint. There were presentations on the drug’s impact on neurological, oncological and inflammatory conditions that while not all new, are increasingly impactful in an aging planet.

A full house of attendees for the patients panel

But that is not all that was discussed. The broader implications of adding cannabis into skincare, diets and medicine chests were also presented – from cannabis’ impact on lowering obesity and positively affecting acne to impacting the opioid epidemic.

Also intriguing this year was a far-reaching study on how polluted the CBD supply chain is in Europe, even for non-medical and nutraceutical products. Not to mention a socio-political plea for legalization of personal use in South Africa.

And that was just the presentations from the stage and in the poster hall.

The conversations swirling around were just as interesting. Because of course, nobody at this three-day gathering, for all the normalization on display, did forget that this gathering of doctors, scientists, cannabis companies and patients is still an anomaly.

The fact is that there are still too few doctors prescribing. And too few trials. And too many fights over efficacy still in the room.

As Alice O’Leary Randall (wife and former partner in activism with her late husband, Professor Randall who initiated the medical efficacy fight in the U.S. in 1975 over glaucoma) said to Cannabis Industry Journal, “It is hard to believe that we are still fighting the same fights all over again.”

Another “AIDS” Crisis?

There is a more dramatic sense of urgency at the IACM than other conferences that focus just on the “business.” In part, this is because the conference is made up of not only doctors and researchers who fight to prescribe the drug or get trials funded, but also patients on the front lines in a country where the drug is supposed to be covered by health insurance.

Dr. Franjo Grotenhermen (seen on the table) and others during a panel discussion

The patient panel, as a result, was an international face of accusation: To national authorities who still refuse to mandate cannabinoid care – across Europe and beyond. To medical establishments who are not demanding cannabinoid treatment be made mandatory in hospitals and emergency rooms in every country in the EU and beyond. To individual doctors who refuse to come to such conferences, where, if they wanted to, could learn how to begin prescribing the “next penicillin.” To payers and insurers who are still too slow to pick up the message if not the tab.

Indeed, one of the best panels of the conference was a gaggle of doctors, led by Grotenhermen, who discussed the particulars of approaching a new drug – for the very first patient and first time.

Act Up, Speak Out, Silence Equals Death

As the conference wrapped up with its awards dinner, there was of course, a sense of needing to go home with not wanting this to end. For those in the thick of this multi-generational fight, there of course were words of encouragement to colleagues from the industry, internationally. But there was also a new sense of needing to up the pace, if not create faster change.

The battles are far from over – in fact, they are just beginning in many places. As one questioner said of a panel about halfway through the conference – “We need to pick up the fight the same way the AIDS community did on this drug.”

That remark perhaps means less today than it did 20 to 30 years ago when an embattled LGBTQ subculture was the organized point of the spear that fought the early state legalization battles as pioneers for a cause that sought equality as much as it sought a cure.

The plea did not fall on deaf ears.

In the midst of studies, statistics and scientific evidence, in other words, there was a new sense of a need for a renewed fight – and from the medical and scientific community as well as patients.

November 12, 2019

Risks of Bare Concrete Flooring in Cannabis Grow Rooms & Greenhouses

By Kendall Youngworth

3 Comments

With legalization rapidly increasing across states, the cannabis market is exploding. And with estimates of sales in the billions, it’s no surprise that greenhouses and grow rooms are emerging everywhere. As growers and extracting facilities continue to expand one important consideration that most tend to underestimate, is how flooring can impact both their production and product. Bare concrete is often a popular choice in cannabis facilities, as there are typically very minimal costs−if any at all−associated with preparing it for use. However, concrete floors can pose unique challenges when left untreated, which could inadvertently create unforeseen problems and unexpected costs.

Understanding the Risks of Bare Concrete Flooring

Whether a facility is growing or extracting, the proper flooring can play a critical role in helping maintain optimal safety and sanitation standards, while simultaneously contributing to production. That’s why its important for growers and extractors to know and understand the potential risks associated with bare concrete.

Concrete is porous: While concrete is a solid material, people may forget that it is porous. Unfortunately, these pores can absorb liquids and harbor small particles that spill on the floor. They create perfect hiding places for bacteria and other pathogens to proliferate. Pathogens can then contaminate product within the facility, causing a halt on production, and/or a potential product recall. This can incur unexpected costs associated with shutdown time and loss of product.

Concrete can be damp: When in a facility with an untreated concrete floor, at times the slab can feel slightly wet or damp to touch. This is due to moisture within the concrete that can eventually work its way up to the surface of the slab. When this happens, items that are placed on top of the floor can be damaged by trapped moisture above the slab and below the object. When this happens, if a product is not protected properly, it can be damaged.

Concrete is dark and unreflective: An untreated concrete slab can often make a room feel dark and it does not reflect lighting within the room. This can result in the need for extra lights and electricity to properly grow cannabis.

Concrete lacks texture: When working in areas where water and other liquids can fall to the ground and accumulate, flooring with traction can play a key role in helping aid against slip and fall incidents. Untreated concrete typically does not provide sufficient texture and can become very slippery when wet.

The Benefits of Bare Concrete Flooring

While the previously mentioned risks can be associated with bare concrete flooring, there is an upside to the situation! Concrete is the perfect substrate for adding a coating that is built to withstand the industry’s demands.

Non-porous flooring options are impervious in nature, helping to isolate contaminants on the surface, thus enabling proper cleanup and disposal.

With the application of a fluid-applied or resinous floor coating, the risks of bare concrete flooring can be mitigated. There are a variety of resin and fluid-based coating systems that can be applied, such as:

Epoxy and Urethane Systems
Urethane Mortar Systems
Decorative Quartz Systems
Decorative Flake Systems

These durable coatings have numerous benefits and can offer:

Protection against the proliferation bacteria and other pathogens: Unlike porous concrete, a smooth and virtually seamless floor coating eliminates the little crevices where pathogens can grow. This in turn helps aid against the growth of bacteria, keeping hygiene standards at the forefront and grow rooms in full operations.
Protection against moisture damage: As moisture within the concrete can move upward to the surface of the slab, there are moisture mitigation coating systems, that keep it trapped below the surface, thus helping toprotect items placed on the floor.
Brighter spaces and light reflection: Installing a floor coating that is light in color, such as white or light gray, can help brighten any space. The benefits of this are twofold: First, it can help with visibility, helping employees navigate the space safely. Secondly, light reflectivity of the flooring improves lighting efficiency, resulting in fewer light fixtures and smaller electric costs.
Texture options to help aid against slip and fall incidents: Floor coating systems can offer a variety of texture options−from light grit to heavy grit−depending on how much accumulated water and foot traffic the area receives. Without additional texture in wet areas, slip and fall incidents and injuries are inevitable.
A wide range of colors and decorative systems: These coating systems can be designed to match the aesthetics of the building or corporate colors. Some manufacturers even offer color matching upon request. When it comes to colors, the options are virtually endless.

Choosing the Right Flooring: Considering Bare Concrete

Choosing the right flooring for a cannabis greenhouse or processing facility requires important consideration as every grow room and greenhouse is different. Bare concrete is a popular flooring option for manufacturing and processing facilities across industries, however, as discussed, it can pose unique challenges due to its innate nature. That said, by taking the right steps to ensure that the concrete substrate is properly sealed, it can then be an effective and hygienic flooring option, offering high durability and a longer life cycle.

November 12, 2019

Italian Government Cancels One of Aurora’s Licenses

By Marguerite Arnold

No Comments

Aurora has just faced a rare setback in Europe. The Italian government has cancelled one of three tender cultivation lots to supply Italian patients it granted Aurora this summer (in July).

Aurora was the only company to win the bid after other companies were disqualified.

For this reason, the high-level parliamentary attention to the bid this fall is even more interesting. Most foreign cannabis is being imported from the Netherlands and Bedrocan. While Wayland (ICC) and Canopy are in the country (Wayland has established production facilities for CBD in fact), Aurora was the only foreign Canadian cannabis company to actually win government issued, cultivation slots.

What Is Going On?

In July, Aurora won the Italian bid, beating out all other companies for all three lots.

Yet in September, the third lot, for high-level CBD medical flower, was cancelled by the Ministry of Defense which oversees cannabis importing and production, for an odd reason. Specifically, the lot was suddenly “not needed.”

As of October 31, the Minister of Health responded to parliamentarians who wondered about this administrative overrule by saying that the rejected lot (lot 3, for high-level CBD) was in fact rejected because stability studies to define the shelf life of products were not being conducted.

EU GMP Standards Are In The Room In Europe

This is not really a strange turn of events for those who have been struggling on the ground in ex-im Europe to learn the rules.

For at least the second time this year, and possibly the third, a national European government has called stability tests and the equality of EU-GMP standards into question. As Cannabis Industry Journal broke earlier this fall, the Polish government apparently called the Dutch government into question over stabilization tests (albeit for THC imports) during the February to September timeframe.

It is still unknown if there is any connection between these two events although the timing is certainly interesting. Just as it was also interesting that both Denmark and Holland also seemed to be in sync this summer over packaging and testing issues in July.

Aurora and Bedrocan are also the two biggest players in the Polish market (although Canopy Growth as well as other international, non-Canadian cannabis companies are also making their mark).

What is surprising, in other words, is that countries all around Germany are suddenly asking questions about stability tests, but German authorities, still are notably silent.

Why might this be? Especially with German production now underway, and imports surging into the market?

Is This A Strange EU-Level CBD Recreational Play In Disguise?

There are no real answers and no company is talking – but in truth this is not a failure of any company on the ground, rather governments who set the rules. If there are any cannabis companies in the room at this point who are not in the process of mandating compliance checks including stability tests, it is the governments so far, who have let this stand.

Notably, the German government. Nobody else, it appears, is willing to play this game.

Further however, and even more interestingly, this “cancellation” also comes at a time when novel food is very much in the room in Italy. Namely, it is now a crime to produce any hemp food product without a license. There is no reason, in this environment, why a national cultivator could not also produce locally a high-quality, high-CBD product for the nascent Italian medical market.

While nobody is really clear about the details, there is one more intriguing detail in the room. The government may, in fact, allow medical cultivation now by third parties.

November 8, 2019

Multi-Element Analysis Using ICP-MS: A Look at Heavy Metals Testing

By Cannabis Industry Journal Staff

No Comments

Across the country and across the world, governments that legalize cannabis implement increasingly rigorous requirements for laboratory testing. Helping to protect patients and consumers from contaminants, these requirements involve a slew of lab tests, including quantifying the levels of microbial contaminants, pathogens, mold and heavy metals.

Cannabis and hemp have a unique ability to accumulate elements found in soil, which is why these plants can be used as effective tools for bioremediation. Because cannabis plants have the ability to absorb potentially toxic and dangerous elements found in the soil they grow in, lab testing regulations often include the requirement for heavy metals testing, such as Cadmium, Lead, Mercury, Arsenic and others.

In addition to legal cannabis markets across the country, the USDA announced the establishment of the U.S. Domestic Hemp Production Program, following the enactment of the 2018 Farm Bill, essentially legalizing hemp. This announcement comes with information for hemp testing labs, including testing and sampling guidelines. While the information available on the USDA’s website only touches on testing for THC, required to be no greater than 0.3% dry weight concentration, more testing guidelines in the future are sure to include a discussion of heavy metals testing.

Table 1. ICP-MS operating conditions (shaded parameters were automatically optimized during start up for the HMI conditions).

In an application note produced by Agilent Technologies, Inc., the Agilent 7800 ICP-MS was used to analyze 25 elements in a variety of cannabis and hemp-derived products. The study was conducted using that Agilent 7800 ICP-MS, which includes Agilent’s proprietary High Matrix Introduction (HMI) system. The analysis was automated by using the Agilent SPS 4 autosampler.

Instrumentation

The instrument operating conditions can be found in Table 1. In this study, the HMI dilution factor was 4x and the analytes were all acquired in the Helium collision mode. Using this methodology, the Helium collision mode consistently reduces or completely eliminates all common polyatomic interferences using kinetic energy discrimination (KED).

Table 2. Parameters for microwave digestion.

As a comparison, Arsenic and Selenium were also acquired via the MassHunter Software using half-mass correction, which corrects for overlaps due to doubly charged rare earth elements. This software also collects semiquantitative or screening data across the entire mass region, called Quick Scan, showing data for elements that may not be present in the original calibration standards.

SRMs and Samples

Standard reference materials (SRMs) analyzed from the National Institute of Standards and Technology (NIST) were used to verify the sample prep digestion process. Those included NIST 1547 Peach Leaves, NIST 1573a Tomato Leaves and NIST 1575 Pine Needles. NIST 1640a Natural Water was also used to verify the calibration.

Samples used in the study include cannabis flower, cannabis tablets, a cannabidiol (CBD) tincture, chewable candies and hemp-derived cream.

Sample Preparation

Calibration standards were prepared using a mix of 1% HNO3 and 0.5% HCl. Sodium, Magnesium, Potassium, Calcium and Iron were calibrated from 0.5 to 10 ppm. Mercury was calibrated from 0.05 to 2 ppb. All the other elements were calibrated from 0.5 to 100 ppb.

Table 3. Calibration summary data acquired in He mode. Data for As and Se in shaded cells was obtained using half mass correction tuning.

After weighing the samples (roughly 0.15 g of cannabis plant and between 0.3 to 0.5 g of cannabis product) into quartz vessels, 4 mL HNO3 and 1 mL HCl were added and the samples were microwave digested using the program found in Table 2.

HCI was included to ensure the stability of Mercury and Silver in solution. They diluted the digested samples in the same acid mix as the standards. SRMs were prepared using the same method to verify sample digestion and to confirm the recovery of analytes.

Four samples were prepared in triplicate and fortified with the Agilent Environmental Mix Spike solution prior to the analysis. All samples, spikes and SRMs were diluted 5x before testing to reduce the acid concentration.

Calibration

Table 4. ICV and CCV recovery tests. Data for As and Se in shaded cells was obtained using half mass correction tuning.

The calibration curves for Arsenic, Cadmium, Lead and Mercury can be found in Figure 1 and a summary of the calibration data is in Table 3. For quality control, the SRM NIST 1645a Natural Water was used for the initial calibration verification standard. Recoveries found in Table 4 are for all the certified elements present in SRM NIST 1640a. The mean recoveries and concentration range can also be found in Table 4. All the continuing calibration solution recoveries were within 10% of the expected value.

Internal Standard Stability

Figure 2 highlights the ISTD signal stability for the sequence of 58 samples analyzed over roughly four hours. The recoveries for all samples were well within 20 % of the value in the initial calibration standard.

Figure 2. Internal standard signal stability for the sequence of 58 samples analyzed over ~four hours.

Results

In Table 5, you’ll find that three SRMs were tested to verify the digestion process. The mean results for most elements agreed with the certified concentrations, however the results for Arsenic in NIST 1547 and Selenium in both NIST 1547 and 1573a did not show good agreement due to interreferences formed from the presence of doubly-charged ions

Table 5. Mean concentrations (ppm) of three repeat measurements of three SRMs, including certified element concentrations, where appropriate, and % recovery.

Some plant materials can contain high levels of rare earth elements, which have low second ionization potentials, so they tend to form doubly-charged ions. As the quadrupole Mass Spec separates ions based on their mass-to-charge ratio, the doubly-charged ions appear at half of their true mass. Because of that, a handful of those doubly-charged ions caused overlaps leading to bias in the results for Arsenic and Selenium in samples that have high levels of rare earth elements. Using half mass correction, the ICP-MS corrects for these interferences, which can be automatically set up in the MassHunter software. The shaded cells in Table 5 highlight the half mass corrected results for Arsenic and Selenium, demonstrating recoveries in agreement with the certified concentrations.

In Table 6, you’ll find the quantitative results for cannabis tablets and the CBD tincture. Although the concentrations of Arsenic, Cadmium, Lead and Cobalt are well below current regulations’ maximum levels, they do show up relatively high in the cannabis tablets sample. Both Lead and Cadmium also had notably higher levels in the CBD tincture as well.

Table 6. Quantitative data for two cannabis-related products and two cannabis samples plus mean spike recovery results. All units ppb apart from major elements, which are reported as ppm.

A spike recovery test was utilized to check the accuracy of the method for sample analysis. The spike results are in Table 6.

Using the 7800 ICP-MS instrument and the High Matrix Introduction system, labs can routinely analyze samples that contain high and very variable matrix levels. Using the automated HMI system, labs can reduce the need to manually handle samples, which can reduce the potential for contamination during sample prep. The MassHunter Quick Scan function shows a complete analysis of the heavy metals in the sample, including data reported for elements not included in the calibration standards.

The half mass correction for Arsenic and Selenium allows a lab to accurately determine the correct concentrations. The study showed the validity of the microwave sample prep method with good recovery results for the SRMs. Using the Agilent 7800 ICP-MS in a cannabis or hemp testing lab can be an effective and efficient way to test cannabis products for heavy metals. This test can be used in various stages of the supply chain as a tool for quality controls in the cannabis and hemp markets.

Disclaimer: Agilent products and solutions are intended to be used for cannabis quality control and safety testing in laboratories where such use is permitted under state/country law.

November 8, 2019

California Suspends Almost 400 Licenses

By Cannabis Industry Journal Staff

2 Comments

On November 1^st, the Bureau of Cannabis Control (BCC) sent notices to 394 businesses in California that their licenses will be suspended until they comply with certain traceability system requirements. This story was first reported by John Schroyer at Marijuana Business Daily.

On Wednesday, November 6^th, the number of licenses suspended dropped to a total of 385, including 63 retailers, 61 delivery services, 47 microbusinesses, 185 distributors and 29 transportation licenses. That’s almost 5% of all the cannabis business licenses in California.

According to Alex Traverso, spokesman for the BCC, licensees were given plenty of opportunities to fix their errors. Businesses were given notice that they needed to enroll in Metrc within five days following their provisional licensing. The BCC gave those businesses a reminder roughly three months ago and sent an additional warning in late October regarding the deadline.

It’s a relatively easy fix for those trying to get back in compliance. The rationale behind suspending the licenses is that those businesses need to undergo a mandatory traceability system training so they know how to use Metrc and get credentialed. Enroll in the Metrc system, get credentialed and your license should be restored.

“It’s relatively simple to get your license out of suspension,” Traverso told KPBS News. “These are growing pains. I think we knew it was going to be a process and it was going to take some time, and that it was going to be an adjustment period for a lot of people who have been doing things one way for some time now.”

Traverso added that about 80 businesses enrolled in the Metrc system as soon as they received the notice that their license is suspended. Those licenses should be restored to active shortly, Traverso said.

November 7, 2019

Bremen Steps Up Its Cannabis Campaign As Other Groups Lobby For More Access

By Marguerite Arnold

No Comments

The German city of Bremen (perhaps you know it from the Brothers Grimm and the animal musicians) is determined to force the federal German government to play another tune when it comes to basic access within the city.

For those without the special geographic knowledge that comes with being a “local” this is also a deliberately strategic political move. Bremen, like Berlin, is a strange German hybrid, a city-state.

Change here, of course, like Berlin, would have wide impact on other German states.

It is not a new campaign of course. None of these city campaigns for home-grow really are. They are the result of efforts, at this point with elected officials involved, of literally decades of patient activists, who are still necessary. But this time, they have politicians involved. When the national ones don’t listen, the local ones are being dragged in.

That said, don’t expect any breakthroughs or miracles from Bremen or Berlin either right now for that matter. This experiment, in Bremen just like the country’s capital, is still at least several years off, no matter its regular recycling in news stories for the last several years.

Politically right now it is hard to understand the CDU’s continued reluctance to embrace the weed. The CDU is Germany’s strongest and largest “middle of the road” party. Particularly because they along with everyone else of alternative political persuasions are highly alarmed by the right wing AfD’s popularity and spread. It is not inconceivable that even Germany’s largest if not highly beleaguered party might use a little cannabis to stop that. And they are being pushed, hard now, by the fringes.

The Outpricing Of The Patient Movement

Talk to any cannabis-connected company right now and chances are you will hear the phrase “patient first.”

That means nothing in an environment where most patient groups are kept out of the room when legislation opening markets is being written (certainly in Europe). And of course, it is precisely the individuals that these groups represent who cannot afford the legal medication hitting the markets early.

Here, because of the focus on high-quality, GMP-certified product, the chances of a patient collective actually being able to afford a cultivation license (for example) are so far non-existent.

As a result, there is an active foment on the ground right now in almost every country in Europe. This is meeting other kinds of frustration right now and that can be a powerful weapon for change. However, without funded lobbyists in most European capitals and Brussels, there is more power and money behind the established industry right now to keep the (almost) status quo.

As strange as they seem to the cannabis industry right now, GMP certification is a standard pharmaceutical designation.

The boogeymen in the room right now, in other words, for every strong patient group, with its own grey market distribution channels, are the well-funded companies who are in fact getting the laws to change.

Patients, in these environs, as well as their concerns, are left out entirely.

The Strength of The European Gray Market

For this very reason, the gray market problem is going to be large in Europe for quite some time to come. Patients are effectively priced out of the legitimate market if they cannot get insurer approvals and for most that is still the biggest problem in the room.

Are there large gray market grows all over Europe? Yes. As one German activist told Cannabis Industry Journal recently, echoing the comments and practices of thousands of others, “Yes, they made me jump through the hoops, and I have packaging from all the big guys. That’s how I carry my home grow these days.”

Forget “patient cards” that some enterprising distributors are trying to get patients to carry.

The cops don’t challenge legit packaging. And every producer, distributor and patient knows that. Buy once, no matter how exorbitant, and that is all she wrote.

For that reason, “patient numbers” if not “sales” actually mean very little.

It does not matter, in other words, if a cannabis company announces its market entry in any country right now. What matters is that they can prove consistent supply and sales and real patient numbers – which if GDPR (European privacy legislation) is strictly followed, producers and distributors should never really know at a level that such sales are trackable per patient.

And that is where this all gets difficult down in the weeds.

Are there large gray market grows all over Europe? Yes. Are they all under the purview of the criminal black market? No. There are very organized patient non-profit networks locally in just about every city and town in Europe. If not other places.

And, where those fail, certainly in Germany, there is always the area around every local train station. If you are hard up enough and desperate enough, skunk and hash albeit of an indeterminate source, will cost you about $12 per gram.

There is no cannabis company in the room anywhere in Europe that can provide legit product via any pharmacy, for that price at point of sale. Yet. And therein, as always, lies the rub.

November 6, 2019

Cannabusiness Sustainability

Designing More Sustainable Cannabis Facilities

By Sophia Daukus

1 Comment

The topic of sustainability has grown in importance and priority for both consumers and regulators. From reducing emissions to lowering energy and water consumption, cannabis growing facilities face unique challenges when it comes to designing sustainable operations. Moreover, as the cannabis market grows and usage becomes more accepted, regulatory bodies will continue to increase the number of directives to help ensure the safety and quality of cannabis products.

Ubiquitous throughout cannabis grow rooms and greenhouses, flooring can be easily overlooked, yet offers an economical way to create more sustainable facilities. Many of today’s grow rooms are located in old retrofitted warehouses or former industrial buildings that were designed without sustainability or environmental concerns in mind.

Combined with energy efficient lighting and more thoughtful water usage, flooring can help create a more efficient facility that not only improves business operations, but also contributes to a better bottom line.

Sustainability Challenges Facing Cannabis Facilities

Whether in an old warehouse space or a new structure designed from the ground up, cannabis businesses face unique operational challenges when it comes to sustainable best practices.

Energy Consumption: Like any indoor farm, lighting plays an important role in cannabis growing facilities. Traditional grow lights can utilize a large amount of electricity, putting a strain on the company budget as well as regional energy resources. Switching to highly-efficient LED lighting can help facilities reduce their consumption, while still maximizing crop yield.
Water Consumption: Among the thirstiest of flora, cannabis plants require consistent and plentiful watering for healthy and fruitful crop production.
Carbon Dioxide (CO₂) Enrichment: In many cases, carbon dioxide is introduced into facilities to help enhance the growth of crops. However, this practice may pose safety and health risks for workers, the surrounding community and the planet at large. CO₂ is a greenhouse gas known to contribute to climate change.

In order to head off upcoming regulatory restrictions, as well as to alleviate the mounting safety and health concerns, it behooves cannabis grow room managers and owners to explore alternatives for improving sustainability in their facilities.

Flooring Requirements for More Sustainable Cannabis Facilities

Spanning thousands or even hundreds of thousands of square feet throughout a facility, flooring can be a unique way to introduce and support sustainable practices in any grow room or greenhouse.

When seeking to improve operational efficiency and implementing the use of sustainable practices in cannabis facilities, look for flooring systems with the following characteristics:

Impervious Surfaces— Fertilizers, fungicides, and other chemicals can infiltrate porous unprotected concrete to leach through the slab matrix and into the soil and groundwater below. Non-porous flooring options, such as industrial-grade, fluid-applied epoxies and urethanes, are impervious in nature, helping to isolate contaminants on the surface, thus enabling proper cleanup and disposal.
Light-Reflective Finishes— Light-colored white or pastel floor surfaces in glossy finishes can help reduce the amount of energy needed to properly illuminate grow rooms. By mirroring overhead lighting back upward, bright, light-reflective flooring can help minimize facilities’ reliance on expensive ceiling fixtures and electricity usage.
USDA, FDA, EPA, OSHA and ADA Compliancy— With cannabis industry regulations currently in flux, grow facilities that select food- and pharmaceutical-compliant flooring will be ahead of the game. Governing bodies in some states have already begun expanding the facility requirements of these sectors to the cannabis market.
Durable and Easy Care— Having to replace flooring every couple of years imposes high costs on businesses as well as the environment. Installation of many traditional types of flooring produces cut-off waste and requires landfill disposal of the old floor material. In contrast, by installing industrial-grade flooring systems that are highly durable and easy-to-maintain, facilities can count on long-term performance and value, while helping to minimize disposal costs and concerns.

Optimal flooring can help cultivation facilities reduce waste, improve the efficacy of existing lighting and lengthen floor replacement cycles for a better bottom line and a healthier environment. Additionally, having the right grow room floor can assist facilities in meeting regulatory requirements, help ensure production of quality products and improve the safety for consumers and staff.

Flooring Benefits for Employees and Consumers

Safety is paramount in any workplace. When it comes to the manufacture of foodstuffs and other consumed products, government oversight can be especially stringent. With the right compliant flooring in place, cultivation facilities can focus on the rest of their business, knowing that what’s underfoot is contributing to the safety of employees and their customers.

Here’s how:

Chemical Resistance— Floors can be exposed to a high concentration of chemicals, acids and alkalis in the form of fertilizers, soil enhancers and other substances. In processing locations, the proper disinfecting and sanitizing of equipment can require harsh solvents, detergents and chemical solutions, which can drip or spill onto the floor, damaging traditional flooring materials. It pays to select cannabis facility flooring with high chemical resistance to help ensure floors can perform as designed over the long term.
Thermal Shock Resistance— Optimal cannabis facility flooring should be capable of withstanding repeated temperature cycling. Slab-on-grade structures in colder climates may be especially vulnerable to floor damage caused by drastic temperature differences between a freezing cold concrete slab and the tropical grow room above. This extreme contrast can cause certain floor materials to crack, delaminate and curl away from the concrete substrate. The resulting crevices and uneven surfaces present trip and fall hazards to employees and leave the slab unprotected from further degradation. As an alternative, thermal shock-resistant floors, such as urethane mortar systems, furnish long-lived functionality even when regularly exposed to extreme temperature swings.
Humidity and Moisture Resistance— Traditional floor surfaces tend to break down in ongoing damp, humid environments. Cannabis facility flooring must be capable of withstanding this stress and more.
Pathogen Resistance— Undesirable microbes, fungi and bacteria can thrive in the moist, warm environments found in grow rooms. Floors with extensive grout lines and gaps provide additional dark, damp locations for pathogen growth. Fluid-applied flooring results in a virtually seamless surface that’s directly bonded to the concrete. Integral floor-to-wall cove bases can further improve wash down and sanitation.
Proper Slope and Drainage— Where food and/or pharmaceutical facility regulations have already been extended to cannabis operations, flooring is required to slope properly toward a floor drain. This prevents puddling, which can be a slip hazard as well as a microbe breeding ground. Unlike more typical materials, resinous flooring offers an economical solution for correcting floor slope wherever needed.

The Problems Presented by Traditional Flooring Options

Previously, cannabis growers often relied on traditional greenhouse-type flooring, including tamped down dirt floors, gravel or bare concrete. However, current and upcoming regulations are curtailing the use of these simple flooring options.

Growers often compare and contrast the benefits and value of traditional greenhouse flooring with more modern solutions, such as fluid-applied epoxy and urethane floors.

Dirt and gravel flooring offers little opportunity to properly sanitize, thus potentially inviting microorganism and pathogen invasion, contamination and costly damage. Growers who have turned to bare concrete floors face other concerns, including:

Unprotected concrete is inherently porous and therefore able to quickly absorb spilled liquids and moisture from the air. In addition, organic and synthetic fertilizers, fungicides, and chemicals can leach through the concrete floors, contaminating the groundwater, injuring the surrounding environment and wildlife.
Older slabs often lack an under-slab vapor barrier. Even in new construction, a single nail hole can render an under-slab barrier ineffective. In these situations, moisture from underneath the floor slab can move upward osmotically through the alkaline slab, leading to blistering and damage to standard commercial floor coverings.
Bare concrete floors can stain easily. These dark stains tend to absorb light instead of reflecting it, contributing to a potential increase in energy usage and cost.
The mold proliferation encouraged by the warmth and humidity of grow rooms can easily penetrate into the depths of unprotected slab surfaces, eventually damaging its structural integrity and shortening the usable life of the concrete.

While traditional greenhouse flooring options can initially seem less expensive, they frequently present long-term risks to the health of cannabis grow businesses. In addition, the performance of dirt, gravel and bare concrete floors runs counter to the industry’s commitment to reducing the carbon footprint of growing facilities.

Choosing Sustainable Grow Room Flooring

It’s no secret that the cannabis industry is undergoing enormous change and faces numerous environmental challenges. Luckily, optimal flooring options are now available to help growers economically increase their eco-friendly practices on many fronts. By focusing on quality resinous flooring, cannabis growers can get closer to meeting their sustainability goals, while simultaneously contributing to improved operation efficiency, enhanced yields and an increased bottom line.

November 6, 2019

Keep Your Cannabis Product Safe with Dependable Packaging

By Danielle Antos

No Comments

No matter what type of packaging you select for your cannabis product, it needs to be dependable. Packaging is not only the first impression of your company to consumers; it must securely contain and protect the product inside. No one wants to purchase products inside packaging that looks dirty or isn’t sealed properly – it is imperative that packaging looks clean and safe to consumers. How does your cannabis packaging stack up? Is it sealed properly? Is it clean and defect-free? Does it conform to the ever-changing regulations?

Using plastic bottles and closures is a great way to secure your cannabis product and showcase your brand. Plastic cannabis packaging offers many different options: bottles can be produced using sustainable materials and come in many different shapes and capacities. Typical closures are child-resistant, lined or unlined, and with a text or pictorial top.

Because packaging performs so many functions for your cannabis business, it is important to realize that not all plastic bottles and closures are the same. High density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP) and polyethylene terephthalate (PET) bottles and closures are widely used for cannabis packaging. Keep in mind that bottle selection is only half of the equation. Equally important is selecting a closure that works with the bottle and has the right features you need.

So, how do you select the right plastic closure for your cannabis bottles? Your packaging manufacturer should be able to guide you towards the solution that’s right for you. However, there are several key factors that will help you identify a superior packaging solution.

Closure Seal

Unevenly manufactured bottle tops can result in poor closure seals and an increased risk of product contamination. Choosing the incorrect lining material can lead to poor protection of your product or may not provide the proper tamper evidence required by regulatory agencies.

A bad seal can also jeopardize the freshness of your cannabis product. It can cause the flower to become excessively dry, resulting in overfilling to make up for weight loss. Situations like these can lead to higher product costs for your company.

Child-Resistant

What’s more important than keeping cannabis out of the hands of children? Child-resistant (CR) packaging not only increases safety; it instills consumer trust in your products and your brand. A closure that doesn’t fit the bottle can prevent the bottle and closure from working properly together, leading to possible accidents if the product is around children. CR closures are available in many different styles and functions – from traditional push-and-turn systems to snap caps and more.

Individual states are cracking down on child-resistant packaging certification for cannabis products. Although FDA approval is not currently required, it will be in the future. Be a leader in the cannabis industry and make preparations now to be compliant with future regulations.

Senior-Friendly

Closures can be child-resistant and at the same time be senior-friendly. Select closures that enable use by individuals who may have problems opening traditional capping systems. Innovative companies are designing closure systems that can be both safe for children as well as easy-to-open for those who have difficulty using their hands.

Compatible Bottles

Be sure that the closure you select works correctly with your chosen bottle. Can your packaging partner manufacture and supply closures that guarantee complete functionality with the bottle to protect your product? Closures produced by the same manufacturer as the bottles will ease your mind that the closure and bottle function correctly together. A one-stop-shop approach will also save you time and money.

Country of Origin

Is the packaging you use manufactured in the United States? Plastic bottles and closures manufactured overseas may have impurities in the resin or colorant that could leach or bleed into your cannabis products. They may not have documentation of origin or comply with FDA regulations. Your cannabis packaging partner should be able to provide this documentation so you can rest assured that your bottles and closures are manufactured under strict guidelines for the safety of your consumers and that your product won’t be affected. In today’s emerging cannabis market, there are stringent regulations on all types of cannabis packaging. If you use packaging that does not conform to regulations, you are putting your company at risk for product recalls, decreased sales due to low consumer confidence and other undesirable risks.

Selecting poor closures and bottles for your cannabis packaging can have long-term consequences. Not only will your brand be diminished, but your profitability will be reduced as well. Understanding how to identify the characteristics of quality plastic packaging that can help you avoid declining consumer confidence and lost sales. Work with a plastic packaging manufacturer that understands how important perfect quality is to your business.

October 30, 2019

The Economics of Ex-Im In Europe

By Marguerite Arnold

No Comments

You have read the press releases. You may have heard about such ideas at a recent cannabis conference in and around the EU of late. Or you may have encountered new distributors coming into the game with a German presence and a decidedly interesting ex-im plan that sounds a bit, well, off the map.

No matter how geographically creative some of these plans are, the problem is that many of these ideas literally do not make economic sense. Either for the companies themselves (if not their investors), and certainly not for patients. Not to mention, truth be told, the looming price sensitivity issues in the European market that North Americans, for starters, seem to still just be waking up to.

Some Recent Examples….

Yes, exports from Denmark have been much in the news lately (including into both Germany and Poland). Truth be told, however, this makes about as much sense, economically, as importing ice to eskimos. Why? Denmark, for all its looser regulations and less-uptight approach to the cannabis discussion generally, is one of the most expensive labour markets in Europe. Fully automated production plants are one thing, but you can build those in other places too. Especially warmer climates, with lots of sunshine. German production, as it comes online, will also make this idea increasingly ludicrous.

Who on earth got on this bandwagon? It seems that the enthusiasm in the room began when Denmark began to import to Germany (where the disparities in wages in production are not so noticeable). However, lately, several Canadian companies with a Danish footprint have been eying Poland of late.

And on that particular topic – there are many who are doing the math and trying to figure out, as the alternatives get going, if even Canada makes much sense, or will in a few years.

Low Wage Markets With Sunshine Are Hotspots For European Cannabis Production

Like it or not, the European market is extraordinarily price sensitive – namely because it is not “just” consumers called patients picking up the tab but health insurance companies demanding proof of medical efficacy.

That starts, a bit unfortunately, with understanding wage economics across Europe. The warmer the climate, in other words and the further east on the map, wages drop precipitously. That is “good” for an industry looking to produce ever cheaper (but more compliant) product.

It is also good, at least politically, for countries whose elected leaders are being forced to admit that cannabis works, but are less than copacetic about encouraging local production. See Germany for starters, but places like Austria, Poland and most recently France (which has just embarked on a first of its kind medical cannabis trial).

Here, no matter the temporary buzz about Denmark, are the places that cannabis production makes sense:

Portugal: The country is a newcomer in the cannabis discussion this fall, although in truth, the seeds of this reality were sown several seasons ago when Tilray began to build its production plant in the country in 2017. They are far from the only company who has seen the light, and these days, farmers are getting hip to the possibilities. Especially if they are already exporting crops throughout Europe.

Spain: The industry that can afford GMP certification is getting going, but everyone else is stuck in a limbo between pharmaceutical producers and the strange gray market (see the patient clubs in Barcelona). That said, political groups are beginning to discuss cultivation as an economic development tool, if not sustainable food and medication strategies.

Greece: The weather is warm, and the investment climate welcoming. Of all the countries in the EU, Greece has embraced the economic possibilities that cannabis could bring. How that will play out in the next years to come is an intriguing story.

Italy: The southern part of the country in particular is ripe for cannabis investment and it’s full of sunshine. However, as many have noted, organized crime in this part of the world is a bit fierce and starts with the letter M.

Malta: The island is a comer, but does importing cannabis from here really make economic sense? There are trade routes and economic treaties tying the island both to the apparently Brexiting British and Europe. Why not, right? Just remember that along with labour, transportation costs are in the room here too.

And Just Outside The EU…

The country now (sort of) known as North Macedonia and struggling to get into the EU if France would just get out of the way is also going to be a heavyweight in this discussion for years to come. Wages, of course, will increase as part of EU membership, but in general, this country just north of Greece is going to play a highly strategic role in exports throughout Europe.

October 30, 2019

Poland Gets Cracking (Sort Of)

By Marguerite Arnold

2 Comments

One of the surest ways to understand that you are entering not just another country, but what is called an “emerging market” is when you travel from Germany to Poland by train.

There is only one “intercity” option from Berlin Hauptbahnhoff – a far cry from the modern, internet-connected, fast ICE trains that go West. This line is run by the Poles. By the time you reach Warsaw five hours later, however, it is clear at least some parts of this country are booming. The skyscraper construction in the center of town rivals London and Berlin.

Like every emerging market, there are vast disparities in wealth and income, if not opportunity here. And into this discussion, now is coming the entire cannabis discussion. Visiting, as an American, in particular, one is reminded of a city that could be East Berlin 15 years ago.

As a cannabis journalist, it feels, from this perspective, like every American state in the 1990’s. Reform is on the tip of everyone’s tongue. But not quite realized yet, except for a few elites. Beyond such realities which are common in the world of cannabis, how very, well, Iron Curtain.

The difference of course, these days, is that the conversation next door in Germany, as well as other places, is finally forcing the Polish government to face reality. But it is clear, from interviews with activists and patients in particular, as well as the nascent newcomers from abroad testing the cannabis waters, that this fight is not going to be easy on the ground.

Then again, when and where has it ever been?

The Patients….

As always, real reform and market opening is driven by the sheer numbers of sick people who brave arrest to gain access to the plant. Some do it for themselves. Many do it for their children (of all ages). An elderly, boomer couple who talked to Cannabis Industry Journal about their ordeal also see it as a form of justified struggle. And Poles are no strangers to that, far from the cannabis kind.

That ethic is much in the room among the nascent industry that is also struggling to find respect. The Polish side of the discussion is looking at hemp. And growing THC illicitly, just like elsewhere.

But the budding movement here is highly organized, including on the business end, with hundreds of thousands of members. How this translates into a legal industry (besides media and hemp products) is of course, still up for grabs.

That is very much in the minds of those who brave the struggle daily. The patient collective in Warsaw is also highly organized – providing free and non-profit product to those most in need. It is an impressive operation. And further one that is increasingly distrustful of foreigners seeking “market share.” If not the already floating “suits.” Just knowing how to speak Polish, as the activists are, at least realizing, is not a guarantee that they will not be dealing with cannasharks only interested in their contacts and mailing lists. Patients over profits is a phrase you hear a lot here. This has nothing to do with not wanting to support a legit, safe industry. But when you are poor, you find ways to improvise. Including getting your medication.

The Foreign Companies…

Aurora and Canopy Growth are already in the room and there are other Canadians lining up to follow. However, these two are the only ones so far who have been able to get their products registered locally and even then, availability is still in the offing.

These are also highly expensive products. And do not begin to compete with producers now eying the Polish market from North Macedonia and the rest of Eastern Europe.

The foreign companies, in other words, are already broadly falling into two camps. North American curiosity seekers (at this point), and companies, mostly from the East and South, who are looking to Poland to be the “next Germany.” Especially because their product is so price and geographically convenient.

A Battle For Poland’s Emerging Market

It is clear that at least the Canadian companies are already lining up against more home grown and patient interests. Just as what happened in Germany and the rest of Europe so far. And not even on purpose, but more on matters of price.

Like other pre-commoditized markets, the Polish industry is still trying to be (relatively) equal and fair, as much as there is a huge amount of positioning already just below the surface. Everyone is tired of struggling. Dreams of cannabis riches are enticing just about everywhere.

Of course, add to that, patients are dying here, and that always sets the tone – especially when only the richest and lucky few can afford to access the drug through legitimate channels. Face pain, unpleasantness or death or buy in the black market? For the Polish industry on the forefront of the debate, in other words, the stakes are high, the government is moving glacially, and those on the ground are organizing to meet the winds of change.

Foment for another kind of Green Perostroika? Perhaps.

There will, almost certainly as a result of these forces, be a call for a Polish bid – and further one that allows for local producers to enter the medical market.

But the bottom line is that this strange, and exciting and certainly new market is going to be as volatile, and wild west as any in Europe for the immediate future. Expect interesting things, if not more of the same.