In doing so, it opened the door to an industry that many experts agree could exceed $7 billion annually, once the market is fully established. That’s potential the cannabis market hasn’t seen since Washington became the first Pacific state to legalize adult use cannabis, almost 10 years ago (followed shortly after by Colorado, then Oregon in 2014 and California in 2016).
Unfortunately, the leaders of this great country have yet to follow suit, and cannabis remains illegal at the federal level. For those in the cannabis market, this means that state-licensed cannabis businesses must cultivate and sell their products within the confines of the state in which they are licensed. Nothing can cross state lines. Even if a business is licensed in both Vermont and New York, it can’t ship product from one state to the other without running afoul of federal legislation. Most in the East Coast cannabis market view this as a negative.
While it certainly makes things more difficult, a small group of forward-thinking investors and entrepreneurs see this for what it really is: an opportunity to get in on the ground floor and establish state-specific grow operations and other supply-chain waypoints, where none or few currently exist. Think of the current state of the East Coast cannabis market as a beachhead. Right now, the industry is defined by state lines. But when the federal government finally legalizes adult use cannabis from coast to coast—and it’s only a matter of time before it does—those state lines will essentially disappear. When they do, the beachheads established now will become the infrastructure for the entire Eastern seaboard.
Take Virginia, for example. It shares its border with five states that have legalized medical cannabis but have yet to cross the bridge into adult use sales (West Virginia, Maryland, Kentucky, Tennessee and North Carolina). A Virginia-based grow operation built now has the potential to serve not just those five states but other contiguous markets including Pennsylvania, Ohio, South Carolina, and even Alabama, Georgia and Indiana. A relatively small investment now could pay huge dividends in just a few years, when the market literally blows wide open.
It’s this incredible potential that makes the rise of the East Coast cannabis market one of the most important developments in the last five years. And while the potential scale of grow operations and other cannabis businesses is certainly essential to the conversation, let’s not forget that “niche products” within the East Coast cannabis market are still very much up for grabs.
If the past decade has taught us anything, it’s that consumers are willing to pay a premium for high-quality, organically grown cannabis. Both new and long-time cannabis enthusiasts will choose — even demand — high-quality, organically grown cannabis that looks, smells and tastes fresh and doesn’t rely on harmful fertilizers, heavy metals or pesticides. They’re also enthusiastic about supporting brands that have a commitment to sustainable, eco-friendly operations.
It’s very much like the current trends we see in the grocery store aisles. Manufacturers and consumers alike are seeing the value of “whole foods.” After decades of relying on heavily processed fare, both suppliers and end-users are benefiting from higher-quality ingredients. Consumers want to know what’s in the stuff they’re putting into their bodies. When it comes to cannabis, they want to know that what they’re taking to alleviate their anxiety doesn’t include harmful chemicals. This demand has the capacity to push revenue even higher.
And when the dam finally breaks and businesses can ship product from state to state, the idea is for growers to be well-positioned geographically to become suppliers of high-quality, organically grown cannabis, for every state east of the Mississippi.
Cannabis businesses in states such as Colorado have had the past decade to prepare for the coming boom, but that doesn’t mean it’s too late to join the party. The rise of the East Coast market parallels what Colorado and the other Pacific states experienced in the early-to-mid teens—the potential to become a very real industry, with huge capacity for growth and profit. Get in on that action now!
The East Coast cannabis market—and, indeed, the entire U.S. market—also sits on the verge of another game-changing trend: following in the footsteps of other markets and realizing sooner rather than later that high-quality, organically grown, eco-friendly cannabis is the next stage of the game. Few investors and entrepreneurs see that right now, but the astute businessperson can capitalize on both trends now and position themselves and their businesses for huge returns in the very near future. The rise of the East Coast cannabis market makes that a very real possibility.
Update: Governor Michelle Lujan Grisham signed the bill into law on April 12, 2021, making New Mexico the fifth state to legalize cannabis via the legislature.
On March 31, 2021, legislators in New Mexico reached an agreement on SB2/HB2, a bill that legalizes adult use cannabis. The bill now heads to Governor Michelle Lujan Grisham’s desk, where she is expected to sign it.
Following the conclusion of the regular legislative session, the New Mexico House and Senate reconvened for a special session to finalize the cannabis legalization deal at the governor’s request.
The Cannabis Regulation Act (SB2/HB2) decriminalizes possession for adults over 21 and sets up a regulatory framework for licensing, commercial production and sales by April 1, 2022 (a year from now).
According to AP News, the New Mexico bill gives the governor’s office a lot of power in licensing the industry and “monitoring supplies.” That includes the power to appoint a superintendent of the Regulation and Licensing Department, which is in charge of regulatory oversight in the new market.
The Cannabis Regulation Act sets up an excise tax on adult use sales of 12% that rises to 18% over time, in addition to the “current gross receipts on sales that range from 5% to 9%.” The bill also removes taxes on medical sales.
This presentation delves into why consumers want organic products, why going organic is good for the CBD industry and what would it take to become a certified organic brand.
Rapid Potency Screening by Fourier Transform near/mid Infrared Spectroscopy – TechTalk sponsored by PerkinElmer
A Guidance on an Integrated Lifecycle of Designing a Cultivation Operation
Gretchen Schimelpfenig, PE, Technical Director of Resource Innovation
Brandy Keen, Co-Founder & Sr. Technical Advisor, Surna, Inc.
Adam Chalasinski, Applications Engineer, Rough Brothers/Nexus Greenhouse Systems/Tetra
David Vaillencourt, Founder & CEO, The GMP Collective
Kyle Lisabeth, Vice President of Horticulture, Silver Bullet Water
Back by popular demand, this panel discussion is returning with the same cast of subject matter experts to foster a longer, more comprehensive dialogue on cultivation facility design. Designing a cannabis cultivation facility that can produce consistent quality cannabis, meets the demands of the business objectives (profit, time to market, scalability) and consumers and stays within budget and timelines has been a major pain point for new and seasoned business owners and growers. What appears on the surface as a simple proposition – build a structure, install HVAC and fertigation systems, hire a master grower, plant some seeds and watch the sea of green roll in — is anything but.
The Beginner’s Guide to Integrated Pest Management
David Perkins, Founder, Floresco Consulting
This presentation goes into detail on everything you need to know to get started with integrated pest management. Learn about planning and designing your cultivation facility to minimize pest pressure, how to apply pesticides safely and lawfully and pest identification, as well as choosing the correct pesticides.
Starting from Scratch: Launching a Hemp Farm in Georgia
Reginald “Reggie” Reese, Founder & CEO, The Green Toad Hemp Farm
Dwayne Hirsch, President & Chief of Business Development, The Green Toad Hemp Farm
This presentation discusses how The Green Toad Hemp Farm started with an empty lot with no water, power or structures and turned the space into a productive vertically integrated hemp cultivation operation. Learn how to work with local and state regulations from this case study in Southeast Georgia and learn how to operate with friends, not enemies: How building partnerships with your community can ensure business success.
National Agriculture Day (March 23, 2021), is an annual event held by the Agriculture Council of America (ACA), a not-for-profit 501-c (6) organization, to increase the public awareness of agriculture’s vital role in our society.
The ACA believes that every American should:
Understand how food and fiber products are produced.
Appreciate the role agriculture plays in providing safe, abundant and affordable products.
Value the essential role of agriculture in maintaining a strong economy.
Acknowledge and consider career opportunities in the agriculture, food and fiber industry.
We investigated how the hemp and cannabis industry is disrupting agriculture in positive ways, from automated trimming, to controlled environment agriculture, to water conservation and beyond. We interviewed Aaron McKellar, CEO and President of Eteros Technologies, parent company of Mobius Trimmer and Triminator, Mark Doherty, Executive Vice President of Operations, urban-gro, Inc. and Derek Smith, Executive Director at Resource Innovation Institute (RII) to get their perspective on agricultural innovation.
Aaron McKellar, CEO and President of Eteros Technologies
Aaron Green: Why is hand-trimming inefficient at scale?
Aaron McKellar: Hand-trimming is inefficient at scale because it is so labor-intensive and time-consuming, not to mention repetitive and frankly boring. It’s hard to stay fully engaged as a worker trimming by hand, so the consistency of your finished product isn’t reliable with a crew of hand-trimmers.
A hand-trimmer can produce good quality trim on about 2 or 3 pounds per day. A scaled-up facility running just one Mobius M108S Trimmer can realize up to 120 pounds per hour, replacing many dozens, or even into the hundreds of hand-trimmers. The HR nightmare this presents, and all the associated costs of paying and facilitating dozens of employees (parking, washrooms, lunchrooms, PPE and gowning, etc) is simply unworkable. And that’s before COVID.
Green: How does automated trimming benefit large producers and how does the quality compare to hand-trimming?
McKellar: Not all automated trimmers are created equal. Any of the machines out there will help to reduce the need for hand-trimmers by taking off the bulk of the leaf, leaving a small team of “hand-polishers” to finish it up. The Mobius Trimmer is the only automated trimmer on the market today that leaves the technology of the original machines in the past and employs next-gen technology to truly mimic hand-trimmed quality with stunning through-put rates.
We have high-end producers using Mobius Trimmers whose own QC department cannot discern Mobius-trimmed flower from hand-trimmed flower. Hand polishing crews tend to be far smaller when using a Mobius vs first-gen machinery, and many Mobius users don’t touch up at all, instead going straight to market right out of the trimmer. For a look at how our technology differs from the rest of the field, check out this look under the hood.
Mark Doherty, Executive Vice President of Operations, urban-gro, Inc.
Aaron Green: What is controlled environment agriculture?
Mark Doherty: Cannabis cultivators understand growing indoors because, prior to legalization, they had been doing it for years in the gray market. It is by way of that experience that cultivators learned how to manipulate a highly-valuable, complex plant in an indoor setting. As cannabis legalization spread across the United States, many government regulators required that it be cultivated indoors according to strict regulatory protocols. Fast forward 10 years, and we have an industry that is keenly aware of the indoor environmental conditions required to be successful. Critical factors like heating, cooling, ventilation, dehumidification, and how to best mimic Mother Nature’s energy through lighting are all deliberately optimized.
With cannabis cultivation driving the advancements of controlled environment agriculture, market and regulatory forces demanded higher efficiency, reduced energy and resource consumption, and clean crops. In most states, cannabis crops have more stringent testing than food crops. For instance, the lettuce in Massachusetts will not pass the standards for cannabis in Massachusetts. It’s through rapid innovation and technology adoptions that the cannabis industry has paved the way for lettuce to be profitably grown indoors.
Green: How can controlled environment agriculture help alleviate supply chain stresses?
Doherty: By growing food closer to the consumer, you reduce food miles; meaning, that link in the food supply chain gets a lot shorter and is less prone to disruption. Whether you have hyper small cultivation facilities on every street corner, or a larger cultivation facility geographically close to consumers, you can grow 24/7/365. Furthermore, growing locally allows for better prediction of facility output—10 boxes of greens on Monday, 50 boxes of greens on Tuesday, and five boxes of greens on Thursday. This eliminates harvesting a large crop before it is ripe and likely requiring cold storage. The controllability of controlled environment ag is that consistent, reliable contribution to the food supply chain and shortening that path to the consumer.
Derek Smith, Executive Director at Resource Innovation Institute (RII)
Derek Smith: Until this report, if you searched for cannabis water usage, you’d basically find one cited statistic. It was “six gallons per plant per day.” We knew this was from a model based on one extreme illicit market scenario. Based on the data we were seeing and the conversations we were having, this number seemed way off. So, we pulled together a multidisciplinary Water Working Group as part of our Technical Advisory Council. The objective of the Water Working Group was to establish a scientific understanding of how, and how much, water is used for cannabis cultivation so that cultivators have confidence in taking steps to be more efficient, and so that industry leaders, governments and media can be accurately informed about the range of water practices of today’s regulated market.
Green: What key points should cannabis cultivators take away from the report? What key points should regulators and policymakers take away from the report?
Smith: As the cannabis industry matures, water use efficiency will become more important, as it has for other agricultural crops. Pressures to use water efficiently will mount from multiple channels including – reducing input and energy cost, protecting the environment, meeting regulatory standards and simply being good stewards. We recommend that industry and regulators focus efforts on the following areas:
When grown outdoors, water for cannabis production should be assessed like any other agricultural crop and be subject to state and local regulations that apply to other crops. Our research indicates that cannabis neither uses a massive share of water nor uses more water than other agricultural crops. Applying the same standards to cannabis as to other agricultural crops will correctly categorize outdoor grown cannabis as an agricultural crop.
In areas where there may be conflict between water use for cannabis and environmental concerns, regulators and the industry should focus (1) on the timing of water use and (2) the potential of storage to mitigate environmental conflict. Our results show that in many parts of the country legal cannabis farmers have ample water storage to satisfy their needs. In areas where storage is insufficient, increasing storage should be a priority for farmers and regulators.
Our research shows there are still massive differences between cannabis production techniques. As farmers continue to experiment and improve, we expect to see water use be a more important part of cannabis farming decisions and expect new plant varieties and growing techniques to be developed that increase water use efficiency. Yet more data from actual farms and facilities are needed to point the way toward the technologies and techniques that drive optimal efficiency and productivity. It is recommended that producers benchmark their performance and governments consider requiring energy and water reporting by producers. The Cannabis PowerScore can assist in these efforts.
As indoor production continues to grow, especially in areas that have unfavorable climatic conditions for outdoor growing, we expect more cannabis users to rely on municipal water sources. Yet, it is unclear if municipal water suppliers are equipped to work with the cannabis industry. We suggest outreach efforts between the cannabis industry and municipal water suppliers to incentivize efficiency where possible.
In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses integrate innovative practices in order to navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.
Large-scale agricultural practices can take a toll on soil health leading to inefficiencies over the long term. Harvey’s All Naturals is a Colorado-based company specializing in premium farm-to-table full spectrum CBD products. Harvey’s gets all of its hemp from Boot Ranch Farms, an off-grid sustainable hemp farm in Southern Colorado supplied by an artesian well.
We spoke with Harvey Craig, CEO Harvey’s All Naturals and co-founder of Boot Ranch Farms, to learn more about the benefits of regenerative agriculture, how he thinks about soil health, and how they produce their CBD products. Harvey started Boot Ranch Farms in 2014 after the passing of the Farm Bill and Harvey’s All Naturals followed shortly thereafter.
Aaron Green: How did you get involved in the cannabis and hemp industry?
Harvey Craig: I got involved at a very young age, as the youngest of eight kids, seven of which are boys, I was introduced to cannabis on the marijuana side first. As an engineer through the years, I’ve always been involved in creating very efficient growing systems for cannabis.
In the early 2000s, I learned about CBD a little bit through experimenting with marijuana strains to help a friend who had Parkinson’s and also through the research performed by Raphael Mechoulem, an organic chemist and professor at the Hebrew University of Jerusalem in Israel. In 2014, when the Farm Bill made hemp legal, I dropped everything and went into it because I felt “this is what I need to be doing.”
Green: What is sustainable farming mean to you?
Craig: Sustainable farming to me means putting soil health and responsible natural growing practices at the forefront of all agriculture – regenerative processes for soil, in a nutshell. To me, soil health is one of the biggest problems in the United States right now. By regenerating and making our soils living, healthy and with a rich nutrient base we create an ecosystem that is good for human health and health all around.
Green: What do you mean specifically when you say, “soil health?”
Craig: Soil is living. A good natural soil has a living microbiotic structure inside it. There’s a living habitat that forms inside our soil over the years. Large scale agriculture in many cases has depleted or killed this living structure through readily accessible fertilizers and tilling practices.
Farmers understand the soil. There are practices we can undertake that are helping our living soils and helping the microbiotic habitat to thrive. Practices such as no-till technologies, rotating crops, using cover crops, not being a monocrop, responsible water use, healthy fertilizer and pesticide technologies, minimal processing, the list goes on and on…
When we talk about this thing called sustainability, I think it’s very important that we understand there are two sides of cannabis. There’s the marijuana and then there’s the hemp. We can’t put those two together – they’re governed very differently. Hemp became legal through the Farm Bill and is governed by the Department of Agriculture. Hemp is just like any other crop out there really. That means we can mix hemp in with other crops. It’s very much like corn and other crops in how it’s grown on a large scale, industrial basis.
Marijuana on the other hand is governed by each state’s regulatory commission. Those regulations make it very hard to mix in with general agriculture. So, when it comes to the marijuana side, unfortunately, it must be a monocrop. Most marijuana is grown in pots and pots are fine. However, if you are just growing in a pot and then throwing your soil away, that is not very sustainable. As it sits right now, in the marijuana industry there is really no sustainability, unfortunately. The energy use for the lights in indoor grows, for example, creates a huge carbon footprint and load on the electrical grid. I’m not trying to put indoor growing down, but that’s the way it is. The only way I foresee sustainability in the marijuana side of cannabis is to let loose a little bit on regulation and allow it to become a part of normal agricultural processes.
Green: What is it about tilling that degrades the soil quality?
Craig: When we till our soil, we’re turning the organisms in the soil up and we’re allowing the sun to dry them out. If it’s not done properly, you kill that soil structure.
Now, these little microorganisms in our soil create a healthy soil, but it doesn’t happen instantly, this takes years to create. Nobody has the time anymore, everybody’s “go go go” and “make it happen instantly”. So that gets destroyed. Now we have all these dead soils that everybody’s growing in and growers turn to factory-produced fertilizers with readily available nutrients.
When we are talking about cannabis, we can’t just look at monocropping. If you grow one crop in the same soil over and over, the soil is going to get depleted. One of the main things that we deplete is nitrogen and growing other crops, such as clover, can replenish that nitrogen. Growing cover crops protects the soil from the sun, creates nitrogen for the soil, and holds the water within the soil.
Instead of tilling, you can rotate with crops like root vegetables, radishes and other things that have deep root structures. Instead of tearing them up, just let them degrade organically and go back into the soil. Those deep root structures will also help aerate the soil.
Green: What is a farmer’s first approach?
Craig: Farmers want their land to be healthy. True farmers have a oneness with the earth and understand the earth. The farmer’s first approach keeps the farmer involved in creating new technologies for agriculture.
Green: Let’s say you’re a farmer that has land or recently acquired land that’s been industrially grown upon. How would you take that land and start fresh with a regenerative process?
Craig: The first thing you have to do is take soil samples and send them to a lab. That’ll tell you what you’re working with. Also, knowing a little history about the land helps as well. Was it used for grazing? Was it used for growing corn? What was it used for? Were organic practices used?
Then, there are many things you can do to start to regenerate your soil, but it takes time. In many situations, people don’t want to take that time. But what we’re learning is, the people and the farmers that do take that time often take a hit monetarily for the first two or three years. After that, once that structure is maintained, the natural health of the soil can be replenished. Crops will grow better, and they won’t spend as much money on fertilizers and pesticides in the long run because the microbiotic structure in the soil is creating a healthy ecosystem. When we destroy that ecosystem, it doesn’t come back easily or quickly. If there’s a little bit there, it can be regenerated with the right practices.
Green: I understand that the Boot Ranch is an off-the-grid farm. What was your motivation for either going off-grid or remaining off-grid?
Craig: I have a background in alternative energies and engineering, and when creating Boot Ranch Farms there was a lot that went into the sustainability side of it. The farm is extremely far away from the power grid for starters. So, an investment in solar for electricity was money well spent. My thought process was, why would I invest in bringing the wires in when I could actually save money and resources by creating a very efficient solar system and not be tied to the grid? Our farm is self-sustaining without being connected to any grid, which is one of the main reasons for remaining off-grid.
Green: I understand the farm is supplied by an artesian well. How do you monitor your water quality?
Craig: Well, we’re very fortunate. Existing natural water quality is one of the main reasons we decided to grow in the San Luis Valley. When you’re starting something new, you have to look at your financial side of things. Investing in a hemp farm is very different than the marijuana side because you won’t make as much money per pound of product sold. So, you have to watch your budget and not spend too much, or you’re never going to make a profit.
The self-sustaining artisanal well and water rights were existing on the property. There’s no pumping required for it and the water goes into a 10,000-gallon holding tank, where we can monitor and test for water quality. In order to water our plants, we use a pump/drip water system that supplies water to each individual plant. It’s very efficient compared to most watering systems out there, such as flood irrigation or pivots, and really doesn’t use a heck of a lot of water.
Green: Are you growing in open air or greenhouses?
Craig: We grow in two 3,000 square feet industrial-grade greenhouses at Boot Ranch Farms. Greenhouse One has all the bells and whistles including heating, cooling, light deprivation, supplemental lighting, automated controls and more. That greenhouse allows us to mimic Mother Nature a little bit. We can get up to six harvests throughout the course of the year in that greenhouse. However, in reality, we get about four.
In addition, we have a second greenhouse that is set about 100 feet away and set up to keep plants growing on mother nature’s cycle. We can move groups of mature plants to Greenhouse One after each harvest for multiple flowering cycles. Lastly, between greenhouses, we have a 10,000 square foot courtyard that’s protected with shade cloth and other things to help protect those plants from the elements. In late October, all remaining plants in both greenhouses and the courtyard become mature and ready to harvest due to shorter days created by mother nature.
Green: Do you insure your crops?
Craig: We have not. Hemp is a new industry and we have not found good crop insurance.
Green: Do you cultivate your own genetics?
Craig: We work with some other companies here in Colorado to provide genetics. Consistent genetics are extremely important on the hemp side because we need to trust that they are going to keep the THC levels down. On the marijuana side, that part doesn’t matter so much
There are different strains that have been created that I absolutely love, and I’ve tried to stick with them and stay with that seed stock. One of them is called The Wife and the other Cherry Wine. Most of the best hemp I have found is based upon the Cherry strain. People are always looking for high CBD. I’d rather have a lower CBD level in the 8% to 12% range. Something higher in the 14% to 20% range has a higher chance of producing a product with more than the legal amount of THC.
Green: Is Harvey’s All Naturals fully supplied by Boot Ranch Farms?
Craig: Yes, it is. There are a lot of things that go into a quality product and we focus on that at Boot Ranch. We’re small, not trying to compete with the large-scale market. Unfortunately, a high percentage of the products out on the market come from large-scale industrial hemp grows. We focus on long-term medicinal value and grow very high-quality hemp and we try not to degrade it in any way, shape or form throughout processing.
Green: How many square feet or acres is the Boot Ranch Farm?
Craig: Boot Ranch farm is about 260 acres. We only grow on less than three of it.
Green: What’s your extraction process?
Craig: We use cold alcohol extraction. We do not distill to separate our alcohol from the hemp oil. We use what’s called a roto vape. That cold processing preserves our terpenes, it preserves our full-spectrum cannabis oil profile and doesn’t fully decarboxylate our CBDa. We want a large CBDa percentage because there are many things that CBDa is good for when it comes to long term medicinal reasons.
Green: Are you processing your own hemp?
Craig: No, we sub that part of it out. What I’ve learned in this industry is three main parts: 1- the farming; 2- the extraction, and; 3- the product line. Those are three very separate processes and require specialized expertise within themselves. Each is a large investment and it’s very hard to do it all. I decided to work with other people on the extraction part of it. They have the expertise, and we pay them well to do what they do.
Green: Okay, great. And then any final words for Ag Day?
Craig: Support your small farmer in nutrient-rich agricultural products.
Green: Great. That concludes the interview, Harvey!
A thorough cannabis product development process goes far beyond extracting and packaging. Performing advanced analytical testing at each and every stage allows producers to know the quantity, quality and behaviour of compounds in samples. Here are the four key stages from flower to consumption.
Stage 1: Flower
Developing a quality cannabis product begins with knowing the composition of compounds in your starting material. The best analytical tests utilize a metabolomics approach. Metabolomics is a suite of techniques that include a variety of instruments to run samples through in order to receive compositional data. In this stage, LC-qTOF and GC-MS are the best instruments to track all the compounds in the starting plant material. Essentially, metabolomics establishes a fingerprint of the compounds in a plant sample. This is beneficial because producers have to understand how their chosen cannabis plant differs from other cultivars and how it would potentially behave in their desired end product formulations.
Stage 2: Concentrate
After the plant material has gone through an extraction process, producers want to know precisely what is in the extract. Are there compounds that should not be there and are all the desired compounds present? The best way to test the quality of cannabis oils is again to use metabolomics (e.g. via LC-qTOF). This test reveals all the compounds in the sample in order to help the producer determine the purity and consistency of molecules beyond just THC and CBD.
When testing cannabis isolates, it is best to use NMR spectroscopy and X-ray diffraction. NMR characterizes and assesses the purity of single compounds or mixtures in solution or solid state. X-ray diffraction provides information about the crystal structure, chemical composition and the physical properties of the cannabis sample to help the producer prove the identification of desired compounds. Establishing that the concentrates are pure and aligned with what the producer intended to extract is key in this stage of product development.
Stage 3: Formulation
Designing an appropriate drug delivery formula is a universal challenge producers face at this stage of product development. Where nanoemulsion or other carrier approaches are being used, formulation characterization allows producers to understand how their active compounds behave in simulated physiological environments as well as how stable their products are over time. Specifically, nanoparticle sizing and assessing size changes over time can help a formulation scientist ensure the highest quality product is being mixed, and that the desired effect will be imparted on the consumer/patient.
Stage 4: Smoke/Vapor
Many producers might not consider this final stage, but it is critical for all inhalable cannabis products and devices. Using a smoke analyzer and metabolomics testing can identify and quantify compounds present within the formed smoke or vapor from pre-roll joints to vape devices. This is not only important for preventing the production of toxic by-products, but it can help producers create an optimal smoking experience for consumers.
One area that is often an afterthought is quality compliance testing. Despite a number of groups using the required tests well during development, many forget to continue the same robust testing on end products. In the current cannabis product development landscape, there is little guidance on how compliance testing should be conducted on every product “batch.” With these advanced analytical tests, producers can confidently develop compliant, stable and quality cannabis products.
As cannabis legalization becomes more prolific across the United States, entrepreneurs are entering the cultivation business in droves. With so many new companies entering the market and growing cannabis, there are a lot of common errors made when getting started. Here are ten of the biggest mistakes you can make when building a cannabis grow facility:
Failure to consult with experts in the cannabis business – poor planning in floorplan and layout could create deficient workflow causing extra time and costing profits. Bad gardening procedures may result in crop failure and noncompliance could mean a loss of license. Way too often, people will draft a design and begin construction without taking the time to talk to an expert first. Some important questions to ask yourself and your consultant are: What materials should be used in the building of the grow? Is my bed-to-flower ratio correct? How long will it take before I can see my first harvest?
Contractor selection – DO NOT build your own facility; leave it to the experts. Sure, you have experience building things and you have a friend who has worked in construction. Do not make this mistake – Our experience can save you from the mistake’s others have made. To stay lucrative in this competitive industry and to maximize your products’ quality and yields, have the facility built right the first time. Paying an experienced, qualified cannabis professional to build you a facility will produce better yields and will save you time, stress and money in getting you from start of construction to your first crop.
Not maximizing your square footage potential – With today’s fast changing environment, multi-tiered stationary racks, rolling benches and archive style rolling racks help maximize square footage. Without the proper garden layout, you will find yourself pounds short of your potential each harvest.
Inadequate power – Not planning or finding out if there is sufficient power available at the site for your current and future needs. This will stop you from building the overall square footage you want. When finding a building make sure you first know how much power you will need for the size grow you want. With proper engineering you will find out what load requirements will be so you can plan accordingly.
Material selection – The construction material that goes into a cultivation and extraction facility should consist of nonabsorbent anti-microbial finishes. The days of wood grow benches are long gone. Epoxy flooring, metal studs and other materials are mandatory for a quality-built, long-lasting facility.
Hand watering – Once your facility is up and running, many people feel they have spent enough money and they can save by hiring people to water by hand, rather than going with an automated system to handle the watering and nutrients. The problem with this is your employees are not on your plants timetable. What if an employee calls off and can’t come into water at the right time or they mix the wrong amount of nutrients from the formula you have selected? These are issues we see a lot. It is critical to perform precise, scheduled watering and nutrient delivery to increase your yields.
Failure to monitor and automate – Automating your grow is important for controlling the light and fertigation schedules as well as data collection and is crucial to maximizing yields. Being able to do this remotely gives you peace of mind in that you can monitor your grow room temperature and humidity at all times and be notified when something is not right.
Poor climate – This can cause stunted growth, smaller harvests and test failures. Our experience has taken us to facilities that have had mold and mildew issue due to poor climate. Proper air balancing, additional dehumidification along with a proper cleaning procedure can get a facility back in working order. Installing proper climate control systems could save millions of dollars.
Choosing the wrong site or building – Not knowing the history of the building you are choosing to rent or buy can create logistical and monetary nightmares. The wrong site can be a distribution and marketing disaster. In the wrong building, exponentially more money is spent to bring that building up to the standards needed for successful production and yields. For example, bringing in the ceiling and the cleaning of an existing facility can be a great expense. If you do not know what you are looking at when you purchase, you may be in for months of unaccounted expenses and inaccurate timelines. This can be detrimental for companies and individuals that are on restricted timelines and have to start producing successful and continuous yields from a space that has to be converted into a prime grow facility.
Failure to maintain your facility – A dirty site creates an invitation for pests, workplace injuries, unhealthy working environment and equipment failure. Keeping the facility and equipment properly maintained with routine service will ensure efficiency, longevity of equipment life span and reduce mold and bacteria risk. Clean facilities = clean plants and better flower.
Natural product analysis using Carbon-14 is a valuable scientific tool that can be used to confirm the naturality of cannabidiol-based (CBD) ingredients by verifying the percentage of a product that is obtained from naturally-sourced ingredients. Determining the percentage of biobased content in a product allows companies to ensure their CBD ingredients are truly natural-derived, identify the presence of synthetic adulterants, and authenticate marketing and “natural” labeling claims.
Why consider natural product analysis using Carbon-14 to validate your natural CBD products?
Carbon-14 is an isotope present in naturally-sourced materials. Natural product analysis measures the percentage of Carbon-14 present in an ingredient or product. Higher percentages indicate that a product is primarily or completely made with natural-sourced ingredients as opposed to synthetic, petroleum-derived alternatives. These cheaper, synthetic alternatives created from petroleum-based sources cannot be measured using Carbon-14. A product that is all-natural and completely plant-sourced will show a result of 100% biobased content whereas a low or zero percentage will reveal a product that is partially or completely formulated with synthetic adulterants.
Why should you be concerned with verifying the naturality of your CBD products? In recent years, the popularization of CBD extract has increased its demand as an ingredient in personal care and cosmetic products. Higher costs associated with the use of natural CBD extract instead of artificial extracts leads to the use of adulterated ingredients by some manufacturers or false label claims that a product is natural when it is not.
How can you prove your products are the real deal and ensure your customers are sure they’re getting the natural ingredients they expect? Artificial ingredients derived from petrochemical sources do not contain any carbon-14 content. The results of natural product analysis reveal the percentage of a sample that is procured from natural sources, allowing manufacturers and quality assurance teams to confirm their CBD ingredients and products are not synthetic or adulterated and to strengthen claims that their product is truly natural-derived.
Natural product analysis can authenticate the natural content of your CBD products. Validating naturality with Carbon-14 testing strengthens label and marketing claims and confirms your products and ingredients are completely natural and do not contain cheap synthetic adulterants. By verifying the percentage of our product that comes from natural sources as opposed to artificial, petrochemical sources, you can guarantee your product is genuinely made with natural CBD extract.
Cannabinoids—the molecules found in the cannabis plant—are becoming an immensely popular industry, with applications in pharmaceuticals, food and beverage, cosmetics and more. However, the traditional method of harvesting cannabinoids through plants has a tremendous environmental footprint, with the energy-intensive practices required to produce the cannabis plant costing the U.S. billions of dollars each year.
Fortunately, new innovations have emerged that will make this process require significantly less time, energy and natural resources. This article will explore two methods of rare cannabinoid production—the traditional method of cultivation through plants and the newer method of biosynthesis—and will compare their impact on the environment.
Natural Cultivation
The companies that use the traditional process of growth, harvest, extraction and purification have a major problem when it comes to harvesting rare cannabinoids. Rare cannabinoids only show up in trace amounts in plants, which means you need to grow vast quantities of plants to harvest just a tiny amount of rare cannabinoids.
Once you factor in the amount of plants that need to be grown, equipment, fuel, fertilizers, water, man hours, harvesting, extraction and purification, the costs are economically unfeasible. This process uses so much energy, natural resources, water and fertilizers that the end product is not affordable for the majority of consumers.
Cultivation through plants requires hundreds of acres of land, thousands of pounds of fertilizer, thousands of gallons of water and thousands of man hours. In addition, this process uses significant amounts of energy to run equipment, in addition to extraction and purification. Plus, the end products can contain contaminants and toxins due to heavy metals, pesticides, pests, mold and more.
Biosynthesis
Biosynthesis is the production of a desired compound through the natural means of an organism’s biological processes. It produces identical compounds to those found in nature, lending itself as the optimal pathway for the manufacture of cannabinoids identical to their naturally occurring counterparts.
While cultivation through plants is harmful to the environment, biosynthesis produces a much lower environmental footprint because it requires significantly fewer resources. Biosynthesis requires over 90% less energy, natural resources and man hours, along with zero fertilizers, contaminants and toxins. There also no extraction and purification costs.
Biosynthesis needs only 6,000 square feet to produce the same amount of rare cannabinoids as hundreds of acres of plants. This process produces pharmaceutical-grade, organic, non-GMO products at a 70-90% lower cost than cultivation through plants—resulting in cannabinoid products that are more affordable for the consumer.
With climate change increasingly becoming a concern, it’s crucial for us to rely on more environmentally friendly avenues for cannabinoid production. Biosynthesis provides a method of cannabinoid production that requires significantly less time, energy and natural resources than cultivation through plants—resulting in not only a decreased environmental footprint but also safer and less expensive products.
On March 23, 2021, Cannabis Industry Journal is hosting our annual Cannabis Cultivation Virtual Conference. From Noon to 5 pm EST, you’ll get access to nine veterans of the cultivation market discussing a variety of topics related to the ins and outs of growing cannabis and hemp.
Hear from subject matter experts who will share their perspectives on growing organically, facility design and planning, hemp farming and integrated pest management.
Back in December during the Cannabis Quality Virtual Conference, the Cultivation Technology episode featured a session titled A Panel Discussion: Integrated Lifecycle of Designing a Cultivation Operation. Due to a large amount of interest and attendee questions that the panel did not have time to address, we are reprising this panel discussion and bringing it back on March 23.
Speakers for that panel discussion include: Gretchen Schimelpfenig, PE, Technical Director of Resource Innovation; Brandy Keen, Co-Founder & Sr. Technical Advisor at Surna, Inc; Adam Chalasinski, Applications Engineer at Rough Brothers/Nexus Greenhouse Systems/Tetra; David Vaillencourt, Founder & CEO of The GMP Collective, and Kyle Lisabeth, Vice President of Horticulture at Silver Bullet Water.
Other talks from the Cannabis Cultivation Virtual Conference on March 23 include:
Why CBD Companies Should Go Organic
Brad Kelley, COO of Socati
The Beginner’s Guide to Integrated Pest Management
David Perkins, Founder of Floresco Consulting
Starting from Scratch: Launching a Hemp Farm in Georgia
Reginald “Reggie” Reese, Founder & CEO of The Green Toad Hemp Farm
Dwayne Hirsch, President & Chief of Business Development at The Green Toad Hemp Farm
You can check out the agenda in its entirety and register here. Attendees will have the opportunity to ask speakers questions during the live Q&A session that follows each session. Registration is complimentary. For sponsorship opportunities, contact RJ Palermo at Rj@innovativepublishing.net
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.