Tag Archives: document

CannTrust Meltdown Indicative Of Summer Of Scandal To Come

By Marguerite Arnold
No Comments

While you may not have heard of CannTrust Holdings so far, that is now about to change. A summer spectacle of double dealing and corporate greed has put this Canadian cannabis company on the global map.

Unfortunately, the current meltdown underway is indicative of more to come.

A Summary Of The Story So Far

CannTrust, a company which serves 72,000 Canadian patients and got into the game early, decided to do what it saw other companies doing all around them. That covers a lot of ground (good and bad at this point). Regardless, the most relevant recent twist to the saga came when the company hired a new CEO, Peter Aceto last October.

Aceto however, along with the now also fired co-founder and chair of the board Eric Paul, decided to continue growing and harvesting unlicensed product. Worse, this occurred while boasting in public of their productivity gains on the way to securing a hefty investment of capital this spring. $170 million. The grow rooms finally got their certification in April.

What is even more embarrassing however, is that this was a round led by the much-vaunted investors the industry has been courting assiduously for the past several years. Specifically, in this case? Institutional banks like Bank of America, Merrill Lynch, Citigroup, Credit Suisse Securities and RBC Capital Markets.

But that is “just” the North American hemisphere. The rather unfortunately named CannTrust (certainly at this point) also had a European footprint – notably Denmark. Unlicensed cannabis ended up there too, of course. Stenocare A/S, the company at the receiving end of the same, reported receipt of product from the unlicensed rooms on July 4.

As far as such things go, however, you have to give it to CannTrust company executives. In terms of setting standards if not benchmarks and “records”, they certainly seemed to have set a few, although probably not the ones they aspired to. If not, with certainty, their investors.

A Surprise Or Inevitability?

That said, for many who have been sounding warnings for at least a year, the 2019 Summer of Canadian Cannascandal is certainly starting to confirm what many have been saying for quite some time. This is not the first time a securities exchange, for one, has sounded the alarm. Deutsche Börse delisted the entire North American public cannabis industry last summer briefly. Then they revised their policy, reluctantly, after Luxembourg changed its stance on medical use. That said, they are still watching with a standing policy of bouncing any company that runs afoul of their rules.

The problems, issues and more bubbling at the center of this cannameltdown, in other words, are not limited to just one company or country.

And everyone knows it.

Accounting For Past Mistakes

For those who are counting, the value of all of that illegally grown CannTrust product is not insignificant. Estimates are floating in the CA$50-70 million range. The problem is, of course, nobody is sure what numbers to rely on. CannTrust employees knowingly provided inaccurate information to the new CEO if not regulatory body until a whistle-blower provided a few more details.

That said, for all of the hullabaloo, one thing this story also does is point a bright spotlight on the lax enforcement of even this pretty easy-to-understand regulation.

The question, however is, if CannTrust thought it could get away with this kind of blatent flouting of the rules, if not lax oversight, are there any other companies who might have also done similiar things?

After all, even the pesticide scandal of 2016 did not occur at just one company either.

Where Are The Proceedings?

This is a rolling story, which began to break at the beginning of last month when Health Canada issued a non-compliance order to CannTrust and impounded 5,200 kg of dried cannabis that was apparently grown in unlicensed grow rooms on July 3.

There have already been some jaw dropping revelations so far (beyond the executive decision to even go down this road in the first place) no matter how attractive pimping numbers was. Starting with things like fake walls being erected to hide the grow. And then of course pictures that have been all over social media of late, of the now departed CEO Aceto being photographed directly in front of said unlicensed rooms too.

As a result, the drama has continued to unfold in a highly predictable way.

By August 1, CannTrust Holdings, a Canadian cannabis company listed on both the New York and Toronto stock exchanges, was facing a “quasi-criminal investigation” by the Canadian Joint Serious Offenses Team. This is a coalition of law enforcement agencies including the Ontario Securities Commission, the Royal Canadian Mounted Police Financial Crimes Unit, and the Ontario Provincial Police Anti-Rackets Branch.

But CannTrust’s issues don’t end there. This is an international story that is just beginning. Government regulators in Europe if not elsewhere are paying attention.So are shareholders, and their lawyers.

US Patent & Trademark Office Issues Guidance for Trademarking CBD Products

By Aaron G. Biros
1 Comment

Last week, the United States Patent and Trademark Office (USPTO) published an Examination Guide to provide further clarity for how they assess the legitimacy of trademarks for cannabis products. For the uninitiated, the 2018 Farm Bill, which President Trump signed into law on December 20, 2018, removed hemp-derived cannabidiol (CBD) from the Controlled Substances Act. In order to register a trademark in the United States, the mark must be used in a lawful setting, meaning that the USPTO does not register trademarks for products that violate federal law- even if it is legal under state law.

In their guidance document, the USPTO identifies the distinction between hemp and other cannabis varieties as the basis for either issuing or refusing a trademark registration. This means that in the trademark application, companies need to specify that the cannabis product is derived from hemp, or cannabis with less than 0.3% THC in dry weight.

The USPTO clarifies that applications for trademarks that involve CBD filed before December 20, 2018 will be refused, but if they amend the filing date to after that date, the registration will be examined. Below is a direct quote from their examination guide clarifying this:

For applications filed before December 20, 2018 that identify goods encompassing CBD or other cannabis products, registration will be refused due to the unlawful use or lack of bona fide intent to use in lawful commerce under the CSA. Such applications did not have a valid basis to support registration at the time of filing because the goods violated federal law. However, because of the enactment of the 2018 Farm Bill, the goods are now potentially lawful if they are derived from “hemp” (i.e., contain less than 0.3% THC). Therefore, the examining attorney will provide such applicants the option of amending the filing date and filing basis of the application to overcome the CSA as a ground of refusal.

The USPTO’s Examination Guide explicitly mentions the authority of the FDA to regulate products derived from cannabis, much like the 2018 Farm Bill’s language. There is still some confusion in the cannabis industry surrounding the marketing and sale of hemp products under FDA regulation.

FDAlogoUnder the Federal Food Drug and Cosmetic Act (FDCA), using a drug in a food or dietary supplement that is currently undergoing clinical trials is illegal (as is the case here- see Epidiolex for an example of CBD being used as an active ingredient in an FDA-approved clinical trial). According to the USPTO, this means that “registration of marks for foods, beverages, dietary supplements, or pet treats containing CBD will still be refused as unlawful under the FDCA, even if derived from hemp, as such goods may not be introduced lawfully into interstate commerce.”

Regarding trademarks for services involving “cannabis and cannabis production,” the USPTO also issued guidance. This section of the Examination Guide pertains to companies applying for a trademark that fall in the category of ancillary services, such as growing supply companies, lighting, nutrients, pest control and packaging, among other service providers. Basically, this section boils down to the same distinction the Farm Bill made between hemp and other varieties of cannabis. An applicant for a trademark needs to make clear their identification of services offered as involving cannabis containing less than 0.3% THC.

For a helpful guide breaking down what this means for cannabis companies pursuing a trademark registration, Christiane Schuman Campbell, partner at Duane Morris LLP, published this client alert about the USPTO’s examination guide.

Health Canada Issues Voluntary Cannabis Recall Guide

By Marguerite Arnold
1 Comment

Last month, Health Canada published a Voluntary Recall Guide to help producers not only stay in compliance but run their operations better. While it will certainly prove to be a critically useful guide for Canadian LPs who are now subject to domestic regulations, it is also a highly useful document for others. Namely, newly legalizing U.S. states and even European countries now looking for guidance on how to shape, structure and regulate their own burgeoning domestic cultivation markets either underway now or about to start.

What Is Of Particular Interest?

While it may sound like a no-brainer, the guide lays out, albeit in very broad strokes, the kinds of procedures all licensed producers should be implementing anyway to efficiently run a compliant business.

It could be considered, on one level, a critical start-up business guide for those still looking for guidance in Canada (as well as elsewhere). Domestically, the document is clearly a handy template, if not something to create checklists from, in setting up a vital and at this point, mandatory part of a compliant cultivation facility in Canada.

The guide also covers not only domestically distributed product but that bound for export.

One of the more intriguing aspects of the guide is also how low tech it is. For example, the guide suggests that a license holder responsible for recall notices, plan on quick response methods that include everything from a self-addressed postcard to an email acknowledgement link.

That said, recalls must be reported to the government exclusively via an email address (no mail drop is listed). And suggestions about media outlets to which to submit recall notices are noticeably digitally heavy. Websites and social media platforms are suggested as the first two options of posting a recall. Posters at retailers is listed dead last.

What is also notable, not to mention commendable, is the inclusion of how to include supply chain partners in recall notices, as well as the mandate to do it in the first place.

Also Of Note

Also excellent is the attempt to begin to set a checklist and process about evaluating both the process of the recall itself and further identification of future best practices.Health Canada also expects companies to show proof of follow up efforts to reach non-responders all along the supply chain.

For example, the report suggests that LPs obtain not only feedback from both their supply chain and consumers involved, but elicit information on how such entities and individuals received the information in the first place. Further, the volume of responses (especially from end consumers) or lack thereof should be examined specifically to understand how effective the outreach effort actually was in reaching its target audience.

This is especially important because Health Canada also expects companies to show proof of follow up efforts to reach non-responders all along the supply chain.

Regulatory Reporting Guidelines

One of the reasons that this guide is so useful is that Health Canada also expects to receive full written reports touching upon all of the issues it lays out within 30 days of the recall announcement itself.

In turn, this is also a clear attempt to begin to start to document quality controls and attempts to correct the same quickly in an industry still plagued by product quality issues, particularly at home, but with an eye to overseas markets.

As such, it will also prove invaluable to other entities, far beyond Canadian LPs involved in the process this document lays out. Namely, it is a good comprehensive, but easy to follow and generally applicable guide for new states (in the case of the US) if not national governments in Europe and beyond who are now starting to look at regulating their own burgeoning industries from the ground up.

Food Safety Hazards for the Cannabis Industry: ERP Can Help

By Daniel Erickson
No Comments

To say that there has been explosive growth in the cannabis edibles market is an understatement. In the next 5 years, edibles are expected to become a $5.3 billion industry according to the Brightfield Group, a cannabis market research firm. Skyrocketing demand for cannabis infusion in food and beverage products, both recreational and medical, has prompted concern for the health and safety of consumers due to the lack of federal legality and regulatory guidelines for these products. Edibles consumers assume the same level of safety and quality present in other food and beverage products in the market. Progressive cannabis operations are opting to follow current food safety guidelines to mitigate hazards despite not being legally required to do so. Utilizing these guidelines, as well as incorporating an industry-specific ERP solution to automate processes, enables cannabis businesses to provide quality, consistent products and establish standards to support the eventuality of federal cannabis legalization.

FDAlogoEdibles consumption has grown not only in a recreational capacity but also for medicinal use to treat chronic pain, relieve epilepsy symptoms, decrease nausea, combat anxiety and other health issues. Cannabidiol (CBD) infused products take many forms including candies, baked goods, chocolate, oils, sprays, beer, soda, tea and coffee. Their popularity is partly due to their more socially acceptable use, creating an appeal to a wider audience. While the Food and Drug Administration (FDA) is responsible for overseeing food and beverage safety for products sold in the United States, their regulations are not enforced in the cannabis-infused marketplace. Without federal regulatory standards, there exist inherent food safety concerns that create risks to consumers. The average cannabis edibles customer is likely unaware of the “consume at your own risk” nature of the products.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

There are many consequences of not addressing food safety hazards, as the possibility of food-borne illnesses resulting from unsafe and unsanitary manufacturing facilities have become increasingly likely in an unregulated market. In addition to these concerns, problems particular to cannabis growing and harvesting practices are also possible. Aflatoxins (mold carcinogens) on the cannabis bud, pesticide residue on plants, pest contamination, improper employee handling and training and inaccurate levels of CBD all contribute to the risk of outbreaks, hefty fines, recalls or business closure. To mitigate the risk of exposure, it is recommended that edible manufacturers employ a proactive approach of observing proper food safety standards that encompass the growing, manufacturing, packaging, handling, storing and selling of products. With a focus on safety, cannabis edible manufacturers utilizing an ERP solution and vendor with experience in food safety management will reap the benefits that food and beverage businesses have experienced for decades.

Following established food safety protocols and guidelines of the food and beverage and dietary supplement industry, allows manufacturers of cannabis-infused edibles to implement a proactive approach by focusing on safety and reducing the risk to their operations. Food and beverage manufacturing best practices include: maintaining supplier list, quality control testing, sanitary handling of consumables, maintaining clean facilities and mitigating cross-contamination. Successful food and beverage manufacturers also incorporate a food safety team, preventative controls, and a food safety plan (FSP) including a detailed recall plan into their safety initiatives.HACCP

Establishing and maintaining a supplier list with approved quality ingredients is an essential building block for reducing food safety hazards and can be easily maintained within an ERP. Documentation of vendor information and recording of stringent testing results ensures that specific quality standards are met. Conducting extensive research regarding the source of the ingredients for use in cannabis edibles allows companies to confirm that raw ingredients were processed in a safe environment. The importance of supply chain visibility cannot be understated, as suppliers are in control of potential hazards. Quality processes and regularly performed testing is automated through the workflow of an ERP solution in the manufacturing facility – enabling noncompliant raw materials to be quarantined and removed from production. The ERP solution allows for management of critical control points to catch non-compliance issues and set-up of alternate suppliers in case of supplier-related issues. Maintaining approved supplier lists is an industry best practice that provides current and accurate information in the event of possible consumer adverse reactions.

GMPFollowing current Good Manufacturing Practices (cGMPs) should underlie efforts to address food safety concerns in the cannabis edibles industry. An ERP solution assists with documenting these quality initiatives to ensure the safe and sanitary manufacturing, storage and packaging of food for human consumption. This includes evaluating equipment status, establishing cleaning and sanitation procedures and eliminating allergen cross-contamination. Employee training is conducted and documentation maintained in the ERP solution to ensure hygienic procedures, allergen awareness, illness reporting and required food or cannabis handling certifications.

Cannabis businesses can benefit from establishing a food safety team tasked with developing a Hazard Analysis Critical Control Points (HACCP) plan to provide effective procedures and protect consumers from the hazards inherent in edible cannabis products – including biological, chemical and physical dangers. Automating processes within an ERP solution prevents and controls hazards before food safety is compromised. Since HACCP plans have historically been used by food and beverage manufacturers to ensure a safe product for the consumer, cannabis edibles manufacturers can apply the lessons from these food safety protocols and procedures in their initiatives.By utilizing food safety best practices partnered with an ERP solution, cannabis businesses can avoid the negative consequences resulting from failure to address food safety hazards in manufacturing, storage and packaging. 

A comprehensive FSP, as required by the FDA’s Food Safety Modernization Act (FSMA), identifies food safety hazards and guides the development of a company-specific, validated plan. This plan documents processes throughout the manufacturing, processing, packaging and storage stages of the operation. ERP software provides real-time, forward and backward lot traceability from seed-to-sale with the ability to track materials, document recipes and accurately label products. This detailed level of traceability provides an automated system that implements and documents food safety policies throughout the manufacturing process. With a trained Preventative Control Qualified Individual (PCQI) implementing the FSP, preventative controls, recall plans and employee training records are maintained in an integrated system.

The cannabis market’s tremendous growth has driven edibles manufacturers to follow the same guidelines as mainstream food and beverage companies to ensure safety is afforded equally to consumers of cannabis edibles. By utilizing food safety best practices partnered with an ERP solution, cannabis businesses can avoid the negative consequences resulting from failure to address food safety hazards in manufacturing, storage and packaging. At the end of the day, it’s up to cannabis manufacturers to be proactive in ensuring cannabis edibles are safe to consume until regulations are mandated.

Soapbox

ERP’s Role in Ensuring Traceability & Compliance in the Cannabis Market

By Daniel Erickson
1 Comment

Recent trends in the cannabis space and media headlines reveal the challenges and complexities of the evolving cannabis industry with regard to traceability and compliance. Keeping abreast of the evolving state of legislative requirements is complex and requires effective procedures to ensure your business will flourish. At the forefront is the need to provide complete seed-to-sale traceability from the cannabis plant to the consumer, increasing the demand for effective tracking and reporting technologies to assure cultivators, manufacturers, processors and dispensaries are able to meet regulatory compliance requirements. An enterprise resource planning (ERP) solution offers a business management solution designed to integrate all aspects from the greenhouse and growing to inventory, recipe/formulation, production, quality and sales, providing complete traceability to meet compliance regulations.

The main force driving cannabusinesses’ adoption of strict traceability and secure systems to monitor the growth, production and distribution of cannabis is the Cole Memorandum of 2013 issued by former US Deputy Attorney General James Cole. The document was designed to prevent the distribution of cannabis to minors, as well as prevent marijuana revenue from being used for criminal enterprises. Due to the non-legal status of cannabis on the federal level, the memo provides guidance for states whose voters have passed legislation permitting recreational or medical cannabis use. If states institute procedures for transparent inventory control and tracking documentation, the memo indicates that the federal government will refrain from interference and/or prosecution. Despite the Trump administration rescinding the memo in early 2018, companies have largely continued to follow its guidelines in an attempt to avoid targeted enforcement of federal law. Local government reporting is a primary reason for strict inventory control, necessitating reliable traceability documentation of the chain-of-custody. 

Process metrics within an ERP solution are essential in providing the accountability necessary to meet required cannabis compliance initiatives. With a centralized, streamlined and secure system, each process becomes documented and repeatable – enabling best practices to provide an audit trail for accountability in all cannabis activities. Whether cultivating, extracting, manufacturing or dispensing cannabis, an ERP’s functionality assists with compliance demands to manage and support traceability and other state-level requirements.

An ERP solution solves the traceability and compliance issues faced by the industry by providing inventory control management and best practices that automates track and trace record keeping from seed to consumer. Growers are also implementing cultivation management solutions within their ERP and highly secure plant identification methods to mobilize greenhouse and inventory to support real-time tracking. Monitoring the loss of inventory due to damage, shrinkage, accidentally or purposeful destruction is efficiently documented to assure that inventory is accounted for. Similar to other process manufacturing industries, it is possible to produce tainted or unsafe products, therefore an ERP solution that supports product recall capabilities is fundamental. With a centralized framework for forward and backward lot, serial and plant ID tracking, the solution streamlines supply chain and inventory transactions to further ensure compliance-driven track and trace record keeping is met.

Local government reporting is a primary reason for strict inventory control, necessitating reliable traceability documentation of the chain-of-custody. Data regarding inventory audit and inspection details, complete with any discrepancies, must be reported to a states’ seed-to-sale tracking system to conform with legal requirements. An ERP utilizes cGMP best practices and reporting as safeguards to keep your company from violating compliance regulations. Failure to complete audits and meet reporting guidelines can be detrimental to your bottom line and lead to criminal penalties or a loss of license from a variety of entities including state regulators, auditors and law enforcement agencies. A comprehensive ERP solution integrates with the state-administered traceability systems more easily and reliably as compared to manual or stand-alone systems – saving time, money and detriment resulting from non-compliance.

Similar to other food and beverage manufacturers, the growing market for cannabis edibles can benefit from employing an ERP system to handle compliance with food safety initiatives – encompassing current and future requirements. Producers of cannabis-infused products for recreational and medicinal use are pursuing Global Food Safety Initiative (GFSI) certification, employing food safety professionals and implementing comprehensive food safety practices–taking advantage of ERP functionality and processes currently in place in similarly FDA regulated industries.

As legalization continues and reporting regulations standardize, dynamic cannabis ERP solutions for growers, processors and dispensaries will evolve to meet the demands and allow for operations to grow profitably.In addition to lot, serial and plant ID tracking, tracing a product back to the strain is equally important. An ERP can efficiently trace a cannabis strain from seedling through the final product, monitoring its genealogy, ongoing clone potency, CBD and THC content ratios and other attributes. The health, weight and required growing conditions of each individual plant or group of plants in the growing stages may be recorded throughout the plant’s lifecycle. In addition, unique plant identification regarding the performance of a particular strain or variety, how it was received by the market and other critical elements are tracked within ERP system. This tracking of particular strains assists with compliance-focused labeling and determining the specific market for selling and distribution of cannabis products.

Collecting, maintaining and accessing traceability and compliance data in a centralized ERP system is significant, but ensuring that information is safe from theft or corruption is imperative as well. An ERP solution with a secure platform that employs automated backups and redundancy plans is essential as it uses best practices to ensure proper procedures are followed within the company. User-based role permissions provide secure accessibility restricted to those with proper authorization. This level of security allows for monitoring and recording of processes and transactions throughout the growing stages, production and distribution; ensuring accountability and proper procedures are being followed. Investing in an ERP solution that implements this level of security aids companies in their data assurance measures and provides proper audit trails to meet regulations.

In this ever-changing industry, regulatory compliance is being met by cannabusinesses through the implementation of an ERP solution designed for the cannabis industry. Industry-specific ERP provides functionality to manage critical business metrics, inventory control, local and state reporting and record keeping, and data security ensuring complete seed-to-sale traceability while offering an integrated business management solution that supports growth and competitive advantage in the marketplace. As legalization continues and reporting regulations standardize, dynamic cannabis ERP solutions for growers, processors and dispensaries will evolve to meet the demands and allow for operations to grow profitably.

Radojka Barycki picture

Food Safety Planning for Cannabis Companies

By Radojka Barycki
No Comments
Radojka Barycki picture

Food safety incidents can be prevented. However, prevention requires planning, which requires the effort of everyone in a company to create a culture of quality and food safety. How exactly do you plan for food safety? Food safety planning implies the building of a food safety management system. Food safety management systems allow for an efficient management of hazards that may be present in the food by the development and implementation of pre-requisite programs (PRPs) and a food safety plan, while supported by management commitment. So, let’s take a closer look at each of these building blocks:Radojka Barycki will lead a plenary session titled, “Cannabis: A Compliance Revolution” at the 2018 Food Safety Consortium | Learn More

Management Commitment

The development and implementation of a food safety management system requires financial, equipment, and technically sound personnel in order to be successful and sustainable. The management team of any cannabis product manufacturer must be committed to food safety, so the needed resources to develop and implement a food safety management system are provided. Management commitment creates a culture within the operation that supports, sustains and continuously improves food safety. 

Pre-Requisite Programs (PRPs) 

Pre-requisite programs are procedures that establish the minimal operations conditions to produce safe and quality products. Pre-requisite programs are the foundation of food safety and must be developed and implemented prior to creating a food safety plan. They keep potential hazards from becoming serious enough to adversely impact the safety of products produced. Pre-requisite programs include but are not limited to:

  • Document Control
  • Supplier Verification Programs
  • Raw Material Receiving (ingredients, processing aids and packaging)
  • Good Manufacturing Practices (GMPs)
  • Preventative Maintenance (PM) Program
  • Calibration Program
  • Integrated Pest Management (IPM)
  • Environmental Monitoring Programs (EMPs)
  • Water Management Programs (WMPs)
  • Allergen Management Program
  • Standard Sanitation Operating Procedures (SSOPs)
  • Standard Operating Procedures (SOPs)
  • Storage and Transportation Procedures
  • Crisis Management
  • Traceability
  • Recall
  • Record keeping
  • Waste Management
  • Training

Food Safety Plan (FSP)As you can see, food safety planning requires the development and implementation of a lot of programs.

A food safety plan is a documented systematic approach that follows the Codex Alimentarius HACCP Principles to identify, prevent and minimize to an acceptable level or control hazards that may be present in food and that can cause an illness or injure the consumer. The first step in this systematic approach is the formation of a food safety team, which main responsibility is to identify the scope of the food safety plan and to oversee all of the activities associated with the plan (e.g. monitoring, verification, validation, etc.) After the food safety team is formed, the steps outlined below are followed in order (systematically):

  1. Product Description
  2. Product Intended Use
  3. Development of the flow diagram
  4. Verification of the flow diagram
  5. Conduct a Hazard Analysis
  6. Identify Critical Control Points (CCPs) or Preventive Controls
  7. Establish Critical Limits
  8. Monitor Critical Limits
  9. Establish Corrective Actions
  10. Establish Verification Procedures
  11. Establish Record Keeping Procedures

As you can see, food safety planning requires the development and implementation of a lot of programs. Therefore, I highly recommend that you hire a food safety consultant that can guide you through this process.

Richard Naiberg
Quality From Canada

Protecting Intellectual Property In Canada: A Practical Guide, Part 1

By Richard Naiberg
No Comments
Richard Naiberg

Cannabis producers are making large investments in new technologies to improve their plant varieties, production know-how and product formulations. At the same time, producers are working hard to create and promote more compelling, top-of-mind brand identities for their improved products. The series concludes with a 9-point outline of specific steps cannabis producers need to consider taking to protect their key intellectual property assets. 

The value of these investments cannot be realized if competitors are allowed to copy and exploit the producer’s successes. Canada’s intellectual property laws can and should be used to protect cannabis producers from such predation. Invoking Canada’s laws to this end is not difficult and does not have to be expensive. It does, however, require specific, deliberate and early action.

This series of articles outlines the principal means of protecting intellectual property rights in the core technologies and marketing programs of cannabis companies. The series also highlights what any cannabis company must do to ensure that its own activities do not run afoul of another’s rights. No company wants to begin a new venture only to face a lawsuit for intellectual property infringement.

The series concludes with a 9-point outline of specific steps cannabis producers need to consider taking to protect their key intellectual property assets.

Trade Secrets: Protection For Confidential Know How

A trade secret is specific, commercially valuable information and know-how that is kept confidential within the company and cannot generally be reversed-engineered by outsiders. A trade secret provides protection over any type of information or know-how and is not subject to any expiry date. Trade secret protection is lost only when the information or know-how becomes available to the public.

As a best practice, defining the trade secret in a confidential document can be useful as a way of restricting access to the secretCannabis producers generate all kinds of valuable know-how that cannot be appreciated simply from an inspection of the vended product. Examples would include methods of crossbreeding, cultivation, harvesting, extraction and processing. Customer lists and other internal business structures and information may also qualify as trade secrets.

There are no statutory pre-conditions that must be met to obtain a trade secret. A trade secret is acquired simply upon the generation of valuable information or know-how that is kept confidential. As a best practice, defining the trade secret in a confidential document can be useful as a way of restricting access to the secret, and as evidence in proceedings as to the scope of the trade secret (an issue that is frequently in dispute in such cases).

For the trade secret to be maintained, the producer will need to take steps to ensure that access to the know-how and associated documents is restricted only to those who need to know the secret for purposes of carrying out their functions at the company. All personnel with access to the trade secret will need to be bound to confidence by employment agreement and/or by separate contract. When employees leave, they ought to be reminded of their obligations of confidentiality and must be prohibited from removing any documentation regarding the trade secret from the company. All outside companies who need access to the secret must sign non-disclosure agreements. It is typical for owners of trade secrets to be vigilant in their market surveillance and to engage private investigators when they suspect a trade secret has been stolen.

A trade secret’s very confidentiality provides its principal value. A competitor cannot copy what it has no ability to discern. However, when someone with access to the secret ‘goes rogue’, such as by using the know-how for his or her own account or for that of a new employer, the owner of the trade secret must act quickly and bring the matter before the Court. The Court has a broad discretion to stop the rogue and any persons or companies who learn the secret from the rogue from further dissemination or exploitation of the trade secret. The Court also has a broad discretion to craft an appropriate remedy to compensate the trade-secret owner for the wrong. If the action is brought before the trade secret is broadly disseminated, the trade secret may be reinstated and enforceable in the future. If the owner of the secret acts too slowly and the dissemination of the trade secret becomes too broad, the trade secret may be lost forever.

Adopting the use of trade secrets to protect know-how in the cannabis business does suffer from the fragility of the right itself. One disclosure, however inadvertent, can destroy the protection. In addition, a trade secret will not protect a company from a competitor who independently derives the know-how. Further, theft of the trade secret can be difficult to spot because, by its nature, the trade secret is exploited within the walls of the competitor company and is not evident in the marketed product. The owner of the secret will need to watch its competitors for telltale shifts in business direction and product offerings, particularly when those competitors hire the ex-employees of the owner of the trade secret. It is typical for owners of trade secrets to be vigilant in their market surveillance and to engage private investigators when they suspect a trade secret has been stolen.


Editor’s Note: In part 2 of this series, which will be published next week, Richard Naiberg will take a closer look at patents and how business can protect new and inventive technology in Canada’s cannabis industry. Stay tuned for more!

Documentation: Are You Prepared?

By Radojka Barycki
No Comments

Documents play a key role in the world of regulations and global standards. Documents tell a story on programs development, implementation and verification during an inspection or audit. Documents are used as evidence to determine conformance to the law or standard. However, do you know what kind of documents may be reviewed during a regulatory inspection or a food safety audit? Are you prepared to show that the implementation of regulatory requirements or a standard is done efficiently at your facility?

Inspectors and auditors will look for compliance either to regulations or to a standard criterion. Regulations and standards require that documentation is controlled, secured and stored in an area where they cannot deteriorate. Therefore, writing a Document Management Program (DMP) will help a business owner ensure consistency in meeting this and other requirements.Radojka Barycki will host a a plenary session titled, “Cannabis: A Compliance Revolution” at the 2018 Food Safety Consortium | Learn More

A well-developed and implemented DMP provides control over documents by providing a number sequence and revision status to the document. In addition, ownership for development, review and distribution of the documents are assigned to specific individuals within the company to ensure that there are no inconsistencies in the program. Documents must also have the name of the company in addition to a space to write the date when the record is generated. It is recommended to include the address if there are multiple operational sites within the same company.

There are different types of documents that serve as support to the operations:

  1. Program: A written document indicating how a business will execute its activities. When it comes to the food industry, this is a written document that indicates how quality, food safety and business activities are controlled.
  2. Procedures: General actions conducted in a certain order. Standard Operational Procedures (SOPs) allow the employee to know what to do in general. For example, a truck receiving procedure only tells the employee what the expected conditions are when receiving a truck (cleanliness, temperature, etc.) However, it doesn’t tell the employee how to look for the expected conditions at the time of the truck arrival.
  3. Work Instructions: Detailed actions conducted in a certain order. For example, truck inspection work instruction tells the employee what steps are to be followed to perform the inspection.
  4. Forms: Documents used to record activities being performed. 
  5. Work Aids: are documents that provide additional information that is important to perform the job and can be used as a quick reference when performing the required activities within the job. 
Are you prepared to face document requirements now and in the future?

The inspectors and auditors base their role on the following saying: “Say what you do. Do what you say. Prove it!” The programs say what the company do. The procedures, work instructions and work aids provide information on implementation (Do what you say) and the forms become records that are evidence (prove) that the company is following their own written processes.

Regulatory requirements for cannabis vary from state to state. In general, an inspector may ask a cannabis business to provide the following documentation during an inspection:

  1. Business License(s)
  2. Product Traceability Programs and Documents
  3. Product Testing (Certificate of Analysis – COAs)
  4. Certification Documents (applicable mainly to cannabis testing labs)
  5. Proof of Destruction (if product needs to be destroyed due to non-compliance)
  6. Training Documents (competency evidence)
  7. Security Programs

As different states legalize cannabis, new regulatory requirements are being developed and modeled after the pharma, agriculture and food industries. In addition, standards will be in place that will provide more consistency to industry practices at a global level. The pharma, agriculture and food industries base their operations and product safety in programs such as cGMPs, GAPs, HACCP-based Food Safety Management Systems and Quality Management Systems. Documents required during an inspection or audit are related to:

  1. Good Agricultural Practices (GAPs)
  2. Current Good Manufacturing Practices (cGMPs)
  3. Food Safety Plan Documents
  4. Ingredient and Processing Aids Receiving
  5. Ingredient and Processing Aids Storage
  6. Operational Programs (Product Processing)
  7. Final Product Storage
  8. Final Product Transportation
  9. Defense Program
  10. Traceability Program
  11. Training Program
  12. Document Management Program

In the always evolving cannabis industry, are you prepared to face document requirements now and in the future?

Soapbox

5 Things You Can Do To Get the Most Value From Your Consultant

By Vince Sebald
1 Comment

I worked for about 18 years as a company employee in various levels from entry-level engineer to senior director. Since then I have spent over a decade as a consultant in the life science industry as the founder of Sebald Consulting. Presently, I also use consultants as CEO of GxPready!, a web based CMMS software company. Based on this experience, I have put together a top 5 list of things you can do to get the most value when using consultants:

1. Recognize when a project requires a consultant

There can be several reasons a project may benefit from having a consultant which may include bringing a new skill set, industry experience or an outside perspective to bear on a project that is not available otherwise.

Provide clear guidance as to what the task and deliverables are on an ongoing basis.Also, there are occasions when resources are already stretched and you need short-term support to get through an intensive segment of a project, but the work may not be enough to justify additional longer-term resources.

In any of these cases, filling the gap internally can be difficult and time consuming. A consultant can be a great solution. Even if you don’t plan to use a consultant for the project, it may be to your benefit to have a consultant perform a “gap assessment” to help you to identify areas which require improvement to meet compliance requirements or best practice guidelines. This is often done to prepare for audits, for example.

2. Vet the consultant to get a good match

Contact potential consultants to determine if they have the set of skills you are looking for and if they fit within the culture of your organization. Talk to the actual consultant you will be working with before bringing them on.  Review the consulting contract carefully to make sure the terms are mutually acceptable.  Often consultants have some flexibility to accommodate different project situations.

One advantage to using consultants is that you don’t have a long commitment so even after you vet them with interviews, you can work on small projects and gauge the results. Some consulting companies are very formal and others are less so, for example. A good fit is better for both parties. It’s not just the competence, but the culture and personal fit with your team.

3. Provide the consultant with appropriate guidance and resources

Help the consultant give you the best results possible by providing access to the resources (personnel, information, documents, systems, etc.) to allow the consultant to perform the tasks.

Consultants can help you get through unfamiliar territory or help you to manage your team’s workload. Know how to use these resources to benefit your projects. This project manager called just in time.

Provide clear guidance as to what the task and deliverables are on an ongoing basis.

Alternatively, allow the consultant to manage the project and reach out as necessary. Any guidance and resources you can provide the consultant will increase the effectiveness and help control your costs on the project.

If you don’t know exactly what needs to be done (“That’s why I hired a consultant!”) then have the consultant put together a list for you based on some general guidance and then work from that list to get your job completed.

4. Track progress with appropriate level of detail

If you have vetted and hired a consultant, chances are they are going to put in their best effort to meet your requirements. Nonetheless, it is good practice to have a system in place to track hours/costs.

Whether it is weekly reporting, or based on milestones and project updates, this helps to avoid any misunderstandings and provides opportunities for communication of project issues in addition to whatever project updates may be scheduled.

You want your team of consultants and employees to be able to work as well as possible together.Recognize that you can go overboard in this area, working against yourself and the project, if the tracking is so detailed that it takes excessive resources to document. It is definitely possible to inadvertently generate more hours (and expense) by managing time in too much detail. If the concern is high and heavy management is required, perhaps that indicates the consultant is not the best match for this project.

Generally, you can find a good balance with a simple up-front chat with the consultant to review your expectations, and for larger projects it is often formalized in the contract.

5. Recognize if it’s not a good fit

There are many consultants and clients out there. Inevitably, there are times when, despite best intentions, the consultant/client mix isn’t working out. Make sure the contract allows for management of this situation. Can you cancel the contract with reasonable notice? Is there a mechanism for being able to replace members of the team that aren’t working out?

You want your team of consultants and employees to be able to work as well as possible together. If that’s not happening, recognize it and make adjustments as necessary. But don’t lose the contact information. A consultant that doesn’t work out today may be just right for your next project!

Following the above can improve your chances of success with consultants you may hire and allow you to build a solid set of resources you can call on from time to time as things change in your company. Consultants can fill a vital role for tasks requiring specialized skills or short-term projects where a full time hire is not practical.