There is a strange, if yet so far undetected, regulatory hum in the air right now in Europe that will begin to increasingly occupy those who are in the certified industry here or looking to get in.
And no, it’s not imminent “recreational,” although it will also have vast impact on the same.
A little understood regulatory structure (so far at least within the cannabis industry) called EU-BIO is now firmly in the room.
What that is and how it will impact the industry is already starting to show up in a few places (see the new announcement by the Swiss that their recreational trial will be organic). This is of course before any dates have even been decided upon for said trial (although others have been set up in the country for about a year).
Beyond this, there are vast implications for every part of the industry, THC or CBD, medical or “lifestyle” focused.
What is EU BIO?
All food in the European Union is regulated on a “federal” level much like in the United States. The difference in Europe however, is that every European “state” or country (like Germany, Spain or Holland) also then has their own regulatory structure which is also equal to the federal standards of the U.S. – including via treaty on both the pharmaceutical and “consumer” side. In general, as a result, regulations, including in all things cannabis space related, are much stricter in Europe.
What this also means, generally, is that all food, cosmetic and human-use lebensmittel (to use the German word for everyday consumer goods like food, cosmetics and lifestyle products) must pass through regulatory agencies that are very much like the USDA and FDA in every country and on a regional European level before being approved on a national sovereign one. Where those are, and who handles what, however, is a patchwork of agencies across the continent. There is no homogenization, in other words, for an organic producer looking for the right agency to get certification from in Germany and Austria.
The European Union’s logo that identifies organic goods.
The distinctive green logo that is omnipresent in particularly German grocery stores also comes with a few high standards of its own. Namely that the logo must appear on all pre-packaged EU food products claiming to be organic within the EU and all member states as well as all imports. Even more importantly, the logo cannot be placed on “transition” projects – namely those which are hoping to fulfil the regulatory standards but are not there yet.
To complicate matters even further, of course all product that ends up as EU GMP must begin life as an organic product. Forget pesticides – radiated product is a hot topic right now as well as its certification in the German medical market.
And that also means, by definition, that all cannabis production in Europe as well as products hoping to be sold via relatively normal channels, must also meet these certifications.
The only other option of course, is what is called “Novel Food.” And even here, thanks to changes in EU BIO on the table for the next couple of years, those who hope to gain access via this kind of labelling, still need to pay attention to organic production. No matter where you are. Or what you want to sell.
Are All “Organics” Made Equal?
Just as in the medical industry and GMP, the strictures of “certified organic” are supposed to be fairly straightforward, but are interpreted by different countries and regions.
Member states of the EU, pre-Brexit
Generally speaking, however, national or even regional “organics” are not exactly the same. For example, Canadian “organic” is not the same as EU-BIO, starting with the fact that the plants in question are not necessarily of European origin (see the same logic here as behind Novel Food). In other words, there is no automatic equality, starting with the source of the seed. But there are also other issues in the room including processing.
That said, being organic is going to be the watchword of the industry. And in this, a bit surprisingly, the US will also have a lasting impact. Why? Because many countries want to export to the US (far from cannabis) and are required to adopt similar agricultural standards (see Latin America for starters).
Bottom line: it is better to be “green”, through and through, no matter where you are, or where you are from, in the global industry going forward. By the end of 2021, certified organic supply, at every level of the industry, won’t be a “choice” anymore.
There are obvious upsides and downsides to cannabis regulation. Gone are the days when it was a free for all, for outlaws growing in California’s hills, under the limited protections California’s medical cannabis laws provided. While there is no longer the threat of arrest and incarceration, for the most part, there are also a lot of hoops to jump through, and new rules and standards to contend with. This article highlights three areas in which your cultivation plan must necessarily change due to the new regulations.
1. Integrated Pest Management (IPM) is limited
In the new regulated market, products that were once widely used are now no longer allowed. Prior to regulation, in the days of Prop 215, you could spray your plants with just about anything, since there was no testing mandated for the products that were being sold. However, people unfortunately got sick and experienced negative reactions, with products like Eagle 20, which contains mycobutinol, and Avid, which contains bifenthrin. Accordingly, under new regulations there are thankfully much more stringent standards dictating what pesticides can be used. It’s ironic that for most of the “medical marijuana” era in California there were no mandatory testing requirements for the THC content of your cannabis, let alone testing for toxins, including pesticides, molds or heavy metals.
You need to have a very thorough pest management plan to make sure your bug populations are always in check. Given that there are a small number of allowable products for pest control in the regulated market, this can be tricky. You need to be extremely familiar with what is and isn’t allowed in today’s regulations. You must also make sure that someone who is certified to apply pesticides is applying them.
Photo: Michelle Tribe, Flickr
As a word of caution, there have been instances where approved pesticides were found to have old unused chemicals (that are not approved for use) from the manufacturing process in them. They may have only occurred in very small amounts, but they are harmful to humans and there is no lawful way to dispose of them.
Further, the presence of these harmful chemicals can cause your finished product to fail when undergoing mandated testing.
Rather than using risky chemicals, the best solution for (early detected) control of pests is the use of beneficial insects. Although they may not be the best solution for an infestation, predator bugs like Neoseiulus Californicus can efficiently control small populations of spider mites while ladybugs are good to limit aphids. Strategic planning of your IPM is one of the best ways to keep pest levels in check.
2. Plant size and plant count matter more than ever
Despite widespread legalization in the past few years for both the medical and recreational markets in the United States, the black market is still rampant and most cannabis is still being produced illegally in the US and internationally.
Maximizing plant canopy space is essential to a profitable business in today’s market
Generally speaking, in the black market, the less plants you have the better, as high plant counts lead to longer sentences of incarceration. With the passage of prop 215 in 1996, many growers, especially outdoor, started growing their plants as big as they possibly could because most limitations were based on plant counts. Some outdoor growers were able to cultivate plants that yielded over 10 pounds per plant. These days regulations are based on canopy measurements, meaning you can grow as many plants as you want within a defined, limited square footage area. This is where “light deprivation,” a method used to force plants into flowering, becomes favorable as it allows 2-4 harvests per year instead of just one. It is a much more intensive way of growing when you have tens of thousands of plants. While it is easier to plant, cultivate and harvest a larger number of smaller plants, it also requires a much more detailed level of planning and organization.
In order to achieve 4 harvests per year, you must have a well thought out cultivation plan and an all-star staff, but if you are able to accomplish this, you can increase your revenue significantly. Maximizing plant canopy space is essential to a profitable business in today’s market, and to do that will require more detailed planning, better organization and proper crop management.
3. How you grow and what equipment you use
With regulation comes liability for defects or injury. It is essential that all equipment used is approved for its intended use. Traditionally, cannabis was cultivated in secrecy in the black market. This led to many unsafe grow rooms being built by people who did not have the proper skills to be undertaking projects such as converting a garage into a grow room or handling the electrical and plumbing running into them. Accordingly, there were many instances of damages to property or injuries to people because of this. Now that counties and states permit cannabis cultivation facilities, the infrastructure and labor that is done must meet regulated building codes and general safety requirements. It is therefore imperative to know the codes and regulations and hire a professional that does, to ensure you meet the standards in order to avoid potential liability.
Larger scale cultivation requires bigger and more expensive equipment. Cultivation facilities are more likely to have sophisticated equipment, such as chiller systems, that are designed to control the grow room environment. While very efficient, some are not intended to be used specifically for cannabis cultivation, and can therefore be difficult to control and maintain. They perform very specific functions, and when not properly tuned to your conditions, can malfunction by prioritizing dehumidification over cooling. This can be a real challenge in warmer climates when temperatures rise, requiring cooling, but also necessitate removal of moisture from the cultivation space.
Larger scale cultivation requires bigger and more expensive equipment.
On the other hand, there is new technology that can make a huge difference in the success of your cultivation. I recently worked with two different companies that specialize in root zone heating systems. One manufactured equipment for root zone heating and cooling of 10k sq ft raised beds that had never been used in California previously. The other company specialized in root zone heating using radiant floor heat. They both worked as intended to maintain a constant root zone temperature, which increased plant health, and ultimately increased yield.
Many counties require data collection from your cultivation, requiring you to track the amount of water and nutrients used. Therefore, another useful tool you can use to increase efficiency, is data collection software that will allow you to collect different information about the amount of water and nutrients used, as well as specific information about the conditions in your grow medium. You can also record and display temperature and humidity readings in your grow room, in real time remotely through Wi-Fi, that you can then access from your phone or computer from anywhere in the world. This can be a useful tool when documenting information that your county, state or investors may require from you. Further, the ability to collect and analyze data will allow you to identify areas of inefficiency in order to correct and optimize your grow room’s potential. While you can achieve these same goals with simple in-line water meters, keeping track of nutrients and pesticides is not as easy. Data collection in the most basic form, using a pen and paper, can be an inaccurate and an inefficient use of time, and can easily be misplaced or ruined. Therefore, simple data software collection programs are the best solution to make the process simple and hassle free.
While it is nice to have state of the art equipment, if it does not work properly, or cannot be easily maintained, it will not be worth it in the long run and you will never see a return on your investment. Innovation comes with a price; using equipment that is cutting edge can be risky, but on the flip side, when done properly it can give you a big advantage over your competitors.
In switching from the black market to the regulated market, these three areas have proven to be the biggest areas of change and have presented the biggest challenges. It is important you consider these necessary changes, and make a solid plan before you begin your cultivation. This is where a cultivation consultant can help.
According to a press release published earlier this month, the U.S. Department of Agriculture (USDA) announced two new programs available for hemp growers to mitigate their risk.
The first is called Multi-Peril Crop Insurance (MPCI), which is a pilot hemp insurance program designed to cover against “loss of yield because of insurable causes of loss for hemp grown for fiber, grain or Cannabidiol (CBD) oil.” The second plan is Noninsured Crop Disaster Assistance Program, which protects against losses from lower-than-normal yields, destroyed crops or “prevented planting” where permanent crop insurance is not available.
Both of the programs are now accepting applications and the deadline to apply is March 16, 2020. “We are pleased to offer these coverages to hemp producers. Hemp offers new economic opportunities for our farmers, and they are anxious for a way to protect their product in the event of a natural disaster,” says Bill Northey, Farm Production and Conservation Undersecretary.
The MCPI program is available for hemp producers in 21 states, according to the press release. Th program is available in certain counties in Alabama, California, Colorado, Illinois, Indiana, Kansas, Kentucky, Maine, Michigan, Minnesota, Montana, New Mexico, New York, North Carolina, North Dakota, Oklahoma, Oregon, Pennsylvania, Tennessee, Virginia and Wisconsin.
There are a handful of requirements to be eligible for that program, such as having one year of growing under their belt and have contracts in place for the sale of their crops. Hemp growers producing CBD must have at least 5 acres and hemp growers producing fiber must have at least 20 acres cultivated.
In 2021, the press release states, “hemp will be insurable under the Nursery crop insurance program and the Nursery Value Select pilot crop insurance program.” With those programs, hemp crops can be insured if grown in containers and in accordance with federal law.
To apply for any of these programs, hemp growers must have a license and must be totally compliant with state, tribal or federal regulations, or be operating under a state or university research plot from the 2014 Farm Bill. Growers need to report their hemp acreage to the Farm Service Agency, a division of the USDA.
The press release also mentions that if the crops have above 0.3% THC, the crop becomes uninsurable and ineligible for any of the programs.
Europe continues to be the new frontier of medical and wellness developments in the cannabis industry, with various sources predicting that Europe will become the world’s largest legal cannabis market over the next 5 years. Key related statistics, include:
A population of over 740 million (over double US and Canada combined)
Total cannabis market estimated to be worth up to €123 billion by 2028 (€58bn medical cannabis (47%), €65bn recreational cannabis (53%))
Over €500 million has been invested in European cannabis businesses (including significant expenditure in research and development, manufacturing and distribution)
To reiterate this belief, this month, hundreds of industry experts and delegates will be attending Cannabis Europa in Madrid, to discuss the expansion of cannabis across Europe and the challenges facing the industry across the member states of the EU and the UK.
Global mainstream leans to European strength
Since late 2018, major global operators have made substantial moves into the cannabis sector. Anheuser-Busch InBev, the world’s largest beer company and maker of Budweiser, entered into a partnership to research beverages infused with two types of cannabis. Constellation, owner of Corona beer, announced a commitment for $4 billion investment in Canadian cannabis company Canopy Growth. BlackRock Inc, through five actively managed BlackRock funds, has invested into Curaleaf Holdings Inc, a dispensary operator, for a not too insignificant investment sum of $11 million (as at March 2019). Such international investments prove that cannabis has moved from the fringes and into the mainstream.
When considering the impact of mainstream cannabis, it should be recognised that major European countries have approved or are planning on implementing, legalisation of medicinal cannabis. The UK, Germany, Italy and the Netherlands already have legal systems in place for medicinal cannabis and France and Spain are currently reviewing key legislative reform to align themselves with international practices. At present the German market is the third largest cannabis market (in terms of size) behind the US and Canada.
Member states of the EU, pre-Brexit
In addition to medicinal cannabis, several key European countries have systems in place, or are developing systems, or considering the reform of existing systems, to approve cannabis with THC content at a recreational level. The Netherlands already has a system and Luxembourg’s health minister in August 2019 announced the intention to legalise cannabis for Luxembourg residents. The Luxembourg government is lobbying EU member states to follow suit.
Whilst the EU has a labyrinth of laws in relation to edible CBD (as a novel food) which make the regulatory landscape complex, there has been an explosion of CBD products for vaping and cosmetics. Of course, with each of these products being subject to different local laws (some aligned between EU members states) in relation to vaping and cosmetic related regulations. The Brightfield Group has predicted a 400% increase in the European CBD market (including vaping liquid) from $318m in 2018 to $1.7 billion by 2023. There is also an expansion into applications for CBD with animals with many US manufacturers of CBD-infused pet food.
The European Parliament’s health committee has been calling for properly funded scientific research and there are motions to establish policies to seek to incentivise member states to advance the studies of medical cannabis, with a priority on scientific research and clinical studies – the first step necessary to drafting legislation, designed to better support the industry.
Where does the UK sit within cannabis?
Medicinal cannabis famously saw a legalisation, of sorts, by the then Secretary of State, Sajid Javid, who provided the authorisations for prescriptions for the high profile cases of Billy Caldwell and Alfie Dingley. Subsequently, on 1 November 2018, this was codified into law by an amendment to Schedule 2 of the 2001 Misuse of Drugs Regulations. This allows clinicians to prescribe cannabis as an unlicensed medicine.
There have, of course, been some high profile licensed medicines. The UK company, GW Pharmaceuticals, is the largest exporter of legal medical cannabis in the world, cultivating medical cannabis for production of cannabis-based medicines (e.g. Epidiolex & Sativex). Epidiolex (manufactured by subsidiary Greenwich Biosciences) became the first cannabis-derived medicine approved for use in the US for treatment of seizures caused by Lennox-Gastaut and Dravet syndromes (both severe forms of epilepsy).
When considering the level of research development and investment in the medicinal field, it is no surprise that the UK is the world’s largest producer and exporter of medical cannabis. Research published by the International Narcotics Control Board indicates that the UK produces over 100,000kg a year of medicinal cannabis.
Previous guidance from the National Institute for Health and Care Excellence (NICE) indicated that further research is required to demonstrate the benefit of medicinal cannabis, citing its cost versus evidenced benefit. However, there is now renewed confidence in the UK following NICE’s approval of two cannabis-based medicines produced by GW Pharmaceuticals, Epidiolex (cannabidiol) oral solution and Sativex (nabiximols), for routine reimbursement through the NHS.
Following the re-categorisation of medicinal cannabis in November 2018, a number of clinics have been established where specialised clinicians can start the process of prescribing cannabis based medicinal products (CBMPs). Whilst this route is not fast, and challenges are well documented as to the satisfaction of prescriptions made in the UK, there is momentum behind the development of this as a means for providing genuine and established medical care. A significant step in October 2019, was the CQC registration of one such cannabis clinic, Sapphire Medical Clinics Limited.
In November 2019, a project backed by the Royal College of Psychiatrists was announced with the aim to be the largest trial on the drug’s use in Europe with a target of 20,000 UK patients.
The UK medicinal cannabis sector is establishing a research-based approach to expand usage in the UK and across Europe.
How North America compares to Europe
Canada
Canada, as a first mover within the cannabis sector, has a multitude of large companies which are well-capitalised and have substantial international footprints. The Canadian exchanges have large listed companies looking to Europe with the intention of acquiring or investing into European operations. As of the date of writing, the 10 largest cannabis companies in Canada have an aggregate market cap of over $23.5 billion (and all registered cannabis companies in Canada having an aggregate market cap of over $46.5 billion).
Listed companies have had a tough time over the last 6-12 months with a slowdown in the market as a natural re-balancing occurs – part of which is due to rapid expansion and heavy investment into cultivation by all the major participants in the market. Over the next 6 -12 months we can expect to see management changes (some of which will be voluntary and some of which will be imposed by institutional pressure) to introduce different skill sets at board and senior management level to facilitate the oversight and leadership necessary for large pharmaceutical companies. Many operations have expanded into highly regulated products and complex supply chains whilst still operating with fundamentally the same team that established the operations with entrepreneurial efforts but, perhaps, a lack of experience in these sectors. The recent announcements by Aurora Cannabis and Tilray demonstrate that these restructurings and costs reductions have already commenced. However, with increased experience at board level and an improvement of profitability focused on sustainable business practices, should come new opportunities on a global scale for these North American operations.
The US
The US market, because of the complexity of state and federal laws not being fully aligned, is closer to its infancy than the Canadian market. This is not too dissimilar to the European market. That said, there are a number of well-funded and quite large US enterprises. A limited number of these, such as Tilray, are looking to expand into Europe.
Many of the companies in the US have, and continue to, expand quickly so we can expect to see a number of mergers and acquisitions. We are likely to witness Canadian and US entities merging with one another with the potential for acquisitions for operations within Europe. It is unlikely that the North American companies will risk their capital through organic growth so would be expected to be identifying “turnkey” solutions.
One of the major challenges facing US companies is the complexity of supply and distribution. This is largely a result of the complexities for state and federal laws interacting with one another as well as international importation and exportation with US states.
How you can invest within the UK and Europe
Developments in the fields of research and development are anticipated to add further weight to the lobbying of government and regulatory bodies across Europe.The UK remains, despite the events of Brexit, a major financial hub for Europe. The London market has seen the growth of several investment and operation cannabis companies. This includes private companies such as; EMMAC Life Sciences Limited and the operations formerly trading as European Cannabis Holdings (now demerged into several new entities including NOBL and LYPHE) as well as publicly listed companies; including Sativa Group PLC (the first publically listed cannabis specific company in the UK) and World High Life Plc, both operating on the NEX Exchange.
The Medical Cannabis and Wellness Ucits ETF (CBDX), Europe’s first medical cannabis ETF fund, domiciled in Ireland, and which has been passported for sale in the UK and Italy, has also caused a renewed stir within the market with a further platform for listed investment.
As the regulatory framework evolves further there is an anticipation that more medicinal cannabis and CBD related enterprises should have the opportunity to list on public exchanges, whether in the UK or in European countries.
Conclusion
Despite a period of slow down following the natural rebalancing of the fast-growing North American markets for the cannabis sector, there is renewed confidence in the expansion of the industry. Developments in the fields of research and development are anticipated to add further weight to the lobbying of government and regulatory bodies across Europe.
There is an increased push for a public dialogue and consultation in relation to medicinal and recreational cannabis in the UK, backed by several mainstream media platforms. This is likely to be shaped in some parts by national debates in Luxembourg and other European countries as they consider their own domestic laws.
With European parliaments across the EU (including the UK) hopefully having time freed up to discuss other political matters now that Brexit is progressing, the next 18 months should prove an exciting time within the European cannabis sector.
Germany, for all of the other developments going on right now (globally) is still chugging forward, in integrating medical cannabis. It is slow going – but certainly going.
In terms of overall numbers, there is certainly an interesting story to tell. The import of medical cannabis grade flowers also more than doubled last year over 2018.
Hooray.
But does the “average” German patient have easier access even with more product in the market?
Answer: There are certainly more Germans with more cannabis prescriptions. See the increase in imports and the numbers from the statutory health insurers.
But even though these are clearly positive signs, it has not necessarily gotten much easier so far. That said, it is about to get quite a bit cheaper.
The Mainstreaming of the German and EU Cannabis Market
National pride aside, the German government is in fact the entity which got this whole ball of wax rolling here, and it is they who still determine the pace of regulated change. The cultivation of medical cannabis is now fully underway in the country, with Demecan still in the most interesting position. Aurora has just gotten another certification and is back on the ground in pharmacies.
But many issues remain.
Photo: Ian McWilliams, Flickr
On the ground, pharmacists cannot get enough product on a reliable basis. Patients are still caught in the never-ending merry-go-round of chasing down willing doctors, battling insurance companies for reimbursement and trying to have a good relationship with their local pharmacist. If, of course, they can afford both the drug itself, along with its outlying costs and frustrations to access, and their health insurance company plays ball.
Even then, chances are, the most seriously ill patients are still relying on “other” sources. A reference wholesale price (of €2.30 a gram set by the German government last year) is likely to stabilize the market if not pricing. For everyone – not just those on public healthcare.
The plant is becoming commoditized, even if slower than most people in the industry long to see.
On top of that, while certification is currently gaining steam in the industry, especially in Europe, there are many problems and issues remaining – on everything from processing of the flower to registration of products made from it. And in both the medical and recreational market.
Overall, in other words, markers are all good. But the process is going to be (very) slow if steady for the next several years.
Don’t Expect Continual Explosive Growth
Dronabinol is still at least a third of the public healthcare market. The majority of patients who receive the drug still fit the same overall treatment profile (chronic pain). And doctors are still highly reluctant to consider it as a more standard practice.
But the most important conversation, by far, is still basic legalization and regulation beyond that. That too will change. Not to mention the recreational discussion now absolutely on the table. Four years of a medical market only continue to open doors, not close them. And elsewhere, across the continent, reform is generating new producers from not only southern Europe but just about everywhere else on the globe where cannabis is becoming legit.
For the next year, however, as all of these issues continue to be debated, and at both a national and increasingly local level, don’t expect “explosive” anything.
Those who have established themselves are dug in. It is going to be trench warfare from now on out, barring a major surprise, for the next few years.
What Is Likely To Change The Equation?
CBD battles are absolutely strategic manoeuvres through the intricacies of this regulatory shift (legalization of the plant). This alone, particularly for the next few years, is likely to also move the conversation forward – and not just on the medical front.
It is also patently obvious that governments (starting with Italy) are beginning to again consider the topic of limited home grow and recreational reform.
But the most important conversation, by far, is still basic legalization and regulation beyond that. And until that happens, nothing will be “normal” about a market that is clearly being allowed to grow, in a market which is being carefully tended and managed.
“Explosive” in other words, is far from the agenda of anyone in authority who is making the decisions. And that includes regulated market growth and numbers for the next 48 months at least.
Nepal’s parliament is debating cannabis reform. Even more interestingly, they are also considering cultivation as a way of curbing the harm done to the local population by the importation of distilled spirits. Namely, proceed with cultivation of cannabis and ban imported alcohol.
This is also the first time this specific discussion – alcohol vs. cannabis – has arisen in a national state legislature discussion about legalization quite like this anywhere in the world.
Specifically, instead of “legalize and tax” like alcohol – the mantra of many early American states like Colorado and Washington State, Nepal at least, is taking a directly different approach. Literally to accept cannabis as a drug and recreational substance while moving people away from distilled alcohol. And further doing so specifically as an act of public safety.
Western European nations if not North American ones, take note.
However, this is also a trend that is already showing up in the United States if not Canada all by itself. It is absolutely why the big beer and alcohol companies have invested early and big in this business.
Nepalese politicians clearly seem to want to make a different kind of statement right from the get go. Including potentially banning any cannabis company or funding that is directly tied to alcohol sales – or in the more likely inverse, giving a market alternative to global brands like Constellation. North American brands will sell well in a tourist market specifically there for outdoor sports, spiritual rejuvenation, or a bit of both.
Background on Nepal
Image: Gavin Yeates, Flickr
Chances are you know about as much about Nepal as, well, most people do. It is a small, relatively open country on the edge of a much larger Tibet. Nepal and Tibet literally meet at the Himalayas and share Mount Everest. Tibet being the land of the exiled Dalai Lama and the site of that movie with Brad Pitt.
Nepal is also mostly Hindu, although there is a wide smattering of religious belief in the country that includes Buddhism, Islam, Christianity and Sikhism. And unlike Tibet, Nepal can be reached with a simple tourist visa.
It is for this very reason that such debates in the Nepalese parliament have taken on such an interesting geopolitical tint.
A Quick History of Cannabis and Nepal
Just like other countries touching the Himalayas, cannabis is hardly a “new” development. Indeed, this region of the world is likely to be home to many intriguing indigenous cannabis species – including of the intriguing “purple” kind. For those without a degree in cannabis cultivation, purple coloured cannabis, particularly in the wild, comes from areas that are cold at night – see Hindu Kush, albeit from Afghanistan.
Like other countries subjected to geopolitical forces of the early 1970s, the country was also forced to abandon its cannabis cultivation as part of the Cold War and War on Drugs that targeted this part of the world. Politicians are now calling for that to end.
Beyond tourism however, and local economic development (almost 50% of the economy is still subsistence farming), cannabis is deeply interwoven into local tradition and religion.
February 21 is known as the “Night of Shiva” – where millions of Hindus make religious pilgrimages to holy sites in the highest mountains in the world. Shiva is one of the three gods in the Hindu triumvirate.
Brahma is the creator of the universe. Vishnu is the preserver of it. Shiva, however is the destroyer of the universe in order to recreate it.
Coming as it does a month before the spring equinox, the ritual to Hindus is not one of violence but rather one of the rebirth of spring and renewal just around the corner. It makes sense that cannabis would be associated with the same.
In Nepal, in other words, there is a political and economic turning of the wheel for the new decade that is also spiritually motivated at least, by ancient and traditional Nepalese traditions that are quite literally, as old as time.
Information economics has existed for decades and drives much of how products, including cannabis, are marketed and purchased. One of the essential frameworks that guides information economics are the search, experience, and credence properties of a product (Patterson, 2017). Understanding these different product attributes is key to setting up a sustaining cannabis product, corporation, and industry.
Search
The search attribute of a product is largely what we see prior to the purchase of a product. Images, claims, and packaging may all contribute to the search attribute of a product. You’ve got a good-looking, flower, pre-roll or edible, and it shows well on your insta page. Information is seemingly symmetrical between agency and consumer, what you see is what you get. In the developing cannabis industry, firms are investing a tremendous amount of resources into search attributes.
Experience
What is the effect of the product? There are two aspects of the experience attribute in information economics. Testimonials may be also considered experience attributes, as they give a user knowledge of how a product tastes, how long it takes to kick in, how long it lasts and descriptions of how others perceived the product’s deliverables. Despite testimonial power, experience is largely personal and occurs only after the product is consumed. Information is seemingly symmetrical; you get the experience that the agency planned and you anticipated. Advances in genetics, homogeneous production methods and potency testing demonstrate that the cannabis industry is investing in experience attributes.
A level playing field where transparency is at the forefront of all transactions will help solidify trust and drive sustainable growth. So, your product looks good, tastes good, and has very positive reviews. Customers can’t get enough; they are voting with their wallets for your product. But there is a third part of information economics you may be missing.
Credence
Credence attributes rely on information asymmetry. Think of used cars as a textbook example: sellers of used cars rely on asymmetry to motivate purchases. Highway miles, adult driven, oil changes every 3,000 miles, etc. are claims that can only be verified by the seller, the buyer has no way of knowing if these are true or not. Credence attributes can’t be verified by the seller due to lack of knowledge or expertise (Ford et al, 1988). The same goes for a consumable good like cannabis, only the grower or manufacturer knows what occurred in the “back of the house.” Product safety, therefore, is a credence attribute of cannabis products.
Investing in credence attributes in a young market may seem cost prohibitive. Many in the cannabis industry simply want to follow whatever the state they operate in dictates as the minimum allowable. In hemp we see states that require QR codes on each product that link to a COA, but many do not. Does the cost to produce the COA and QR code make a product more eye-catching or enhance the experiences? No, but those producing it may pay a hefty price if and when the product makes someone sick.
If a firm relies on fragmented, disparate regulatory bodies to dictate their investments in product safety, they will eventually face credence issues. Is smokable flower grown in Texas safer than that grown in Maine? We don’t have data to support either regulation’s effectiveness, so a firm or industry must dictate what the standard is and stick to it.
We need only look at the leafy green industry to see an example of a product that did not break any regulatory guidelines yet continued to sell a good with very negative credence attributes. How long were folks getting sick from leafy greens prior to them identifying the source? No one knows and that is what makes credence attributes so hard to pin down and develop an ROI formula for. Inputs that yield not-sick people aren’t known until someone gets sick. For leafy greens, they had an advantage – years of studies showing that they were good for you. Cannabis, unfortunately, doesn’t have that leg to stand on and faces an uphill battle gaining public trust.
As soccer moms (and dads) across the nation start to work cannabis into their play date wine sessions, the industry must ensure that they are investing in all avenues of information economics. A level playing field where transparency is at the forefront of all transactions will help solidify trust and drive sustainable growth.
References
Patterson, M. (2017). The economics of information. In Antitrust Law in the New Economy (pp. 39-60). Cambridge, Massachusetts; London, England: Harvard University Press. Retrieved February 7, 2020, from www.jstor.org/stable/j.ctvc2rkm6.6
Ford, G., Smith, D., and Swasy, J. (1988), An Empirical Test of the Search, Experience and Credence Attributes Framework, in NA – Advances in Consumer Research Volume 15, eds. Micheal J. Houston, Provo, UT : Association for Consumer Research, Pages: 239-244.
Maine’s Office of Marijuana Policy (OMP), the government agency in charge of regulating their cannabis industry, announced today a six-year contract for traceability software with Metrc LLC. According to the press release, the software will be used for the newly formed adult use market, which is just a few months away from going live with legal sales.
Maine’s OMP was previously under contract with BioTrackTHC as their software provider before switching to Metrc with this new contract. The software is cloud-based and uses radio-frequency identification (RFID) tags on plants and products to track cultivation and distribution of cannabis products throughout the state. The software is commonly used across the country in states that have legal cannabis markets. It essentially prevents diversion to the black market, allows for a transparent supply chain with clear chain of custody tracking and it increases recall readiness.
Erik Gundersen, Director of Maine’s OMP, says Metrc is helping to make a smooth launch of the adult use market. “We are excited to partner with Metrc,” says Gundersen. “Metrc is an industry leader, and their team is committed to delivering a product that will allow us to proceed with the launch of our adult use program later this spring.”
Over the next few months, Metrc and OMP plan on helping the industry familiarize themselves with the new software. The two organizations will go on the road in March, giving licensees training and answering questions. Metrc will then offer online training and evaluations followed by credentialing licensees showing they are proficient with the software.
Jeff Wells, CEO of Metrc, says they are excited to get to work. “We’re excited to partner with the OMP to help launch the state’s adult-use marijuana market,” says Wells. “2020 is another significant year for cannabis industry growth, and we look forward to serving the OMP, local cannabis businesses, and the people of Maine.”
The agreement is a six-year contract with a value of roughly $540,000. License holders pay a $40 monthly fee to access the system, which helps support training and technical support, according to the press release.
Every detail counts at an indoor grow facility. Indoor growers have complete control over nearly every aspect of their crop, ranging from light intensity to air circulation. Among the most important factors to regulate is temperature. While ambient air temperature is critical, growers will also want to measure leaf surface temperature (LST).
To illustrate, let’s say you keep your living room at a cozy 76 degrees. Then, if you place a thermometer under your tongue – your body is (hopefully) not at 76 degrees but is likely between a healthy temperature of 97 to 99 degrees.
A similar story can be told for cannabis plants grown indoors. A grow facility’s ambient air is often different than the plants’ LST. Finding an ideal LST for plant growth can be complex, but modern technology, including spectrally tunable LED grow lights, can simplify monitoring and maintaining this critical aspect.
Why Should Growers Care About LST?
Temperature plays a pivotal role in plant health. Many biochemical reactions contributing to growth and survival only occur within an ideal temperature range. If temperatures dip or spike dramatically, growers may witness inhibited growth, plant stress or irreversible damage to their crops.
The leaf is among the most important plant structures as it’s where most metabolic processes happen. Therefore, finding an optimum LST can improve growth rate and the production of metabolites such as pigments, terpenes, resins and vitamins.
Because many plants rely on their leaves for survival, it makes sense that leaves have their own temperature regulation system. Evaporation through pores in the leaf – known as stomata – can cool the plant through a process called transpiration. Up to 90% of water absorbed is used for transpiration, while 10% is used for growth.
The efficacy of transpiration is determined by the vapor pressure deficit (VPD), which refers to the relative humidity in the ambient air compared to the relative humidity in the leaf. If relative humidity is low, the VPD can be too high, which may cause plants to have withered, leathery leaves and stunted growth. On the other hand, a low VPD correlates to high relative humidity, and can quickly result in disease and mineral deficiencies. Higher humidity often results in a higher LST as transpiration may not be as effective.
When it comes to LST, growers should follow these basic guidelines:
Most cannabis plants’ LST should fall between 72 and 86 degrees – generally warmer than the ambient air.
LST varies depending on individual cultivar. For example, plants that have evolved in colder climates can generally tolerate cooler temperatures. The same can be said for those evolved in equatorial or temperate climates.
CO2 availability also plays a role in LST; CO2 generally raises the target temperature for photosynthesis.
How Does Light Spectrum Affect LST?
We know that CO2 concentration, specific genetic markers and ambient temperature all play an important role in moderating LST. But another important factor at an indoor grow is light spectrum – especially for those using spectrally tunable LEDs. Growers will want to optimize their light spectrum to provide their crop with ideal conditions.
A combination of red and blue wavelengths is shown to have the greatest impact on photosynthesis and, thus, LST. Photons found along the green and yellow wavelengths may not be absorbed as efficiently and instead create heat.
Indoor cultivator facilities often use high powered lights that can give off heat
Optimized light spectrums – those with an appropriate balance between red and blue light – create more chemical energy instead of heat, thereby resulting in a lower LST. Using fixtures that are not spectrally tuned for plant growth, on the other hand, can waste energy and ultimately contribute to a higher LST and ambient temperature, negatively affecting plant growth. Consequently, measuring LST doesn’t only indicate ideal growing conditions but also indirectly illustrates the efficiency of your grow lights.
LED fixtures already run at a lower temperature than other lighting technologies, so indoor growers may need to raise the ambient temperature at their grow facilities to maintain ideal LST. Switching to spectrally tuned LEDs may help growers cut down on cooling and dehumidifying costs, while simultaneously improving crop health and productivity.
What’s the Best Way to Measure LST?
There are several tools available for growers to measure LST, ranging from advanced probes to specialty cameras. However, many of these tools provide a reading at a specific point, rather than the whole leaf, leading to some inaccuracies. Temperature can dramatically vary across the leaf, depending if parts are fully exposed to the light or in the shadows.
Investing in a forward-looking infrared camera (FLIR) gives indoor growers a more accurate picture of LST and light efficiency. That being said, growers should not only measure leaves at the top of the plant, but across the middle and bottom of the plant as well. That way, growers receive a complete snapshot of growing conditions and can make changes as needed.
At an indoor grow facility, it’s not enough to only measure ambient room temperature. Of course, this aspect is important, but it will paint an incomplete picture of plant health. Measuring LST gives growers nuanced insights as to how plants respond to their environment and how they can better encourage resilient, healthy growth.
Using spectrally tunable LEDs makes achieving LST easier and more cost-effective. Lights with optimized spectrums for plant growth ensure no energy is wasted – resulting in superior performance and efficiency.
If you were at Davos this year, you heard alot about CBD. The cannabinoid will again be a headliner in business analysis and bottom line reports this year. But as the market matures, globally, what is the real temperature of the industry? And how fast will regional hiccups resolve?
Regulatory Issues Are In The Room
From the US state markets to the EU, hemp is coming into its own, even though almost everyone also refers to it as CBD (cannabidiol).
In the United States, things are even more murky because of a lack of federal reform and the individual rules and regs of existing state markets. To an extent, the market is being “federalized” on the testing front (see ISO for example) and GMP (at the federal pharmaceutical level), producers are beginning to be able to get certified on a global scale. However, the vast majority of the U.S. market is not anywhere close to the regulatory muster now required of even the most-humble commercial hemp farmer anywhere in the EU.
In Europe, the entire cannabis discussion is already far more defined, and as a result, very much likely to set the rulebook globally, especially as so many people want to import here. And this is going to be a bugbear for the next two years. The rules on EU Bio for starters, are still in flux. And where this ties into GMP downstream, those who brave such waters are in for choppy seas for the time being.
Tie this into Novel Food, and this is an area right now that should only be charted by the most experienced navigators, and not just using the stars.
The Battle Is On – Both On The High Seas And The High Streets
For all the desire to bring “whole plant” into the room, (in other words recreational cannabis and medical cannabis with the THC still attached), CBD fever at least has spread in Europe faster than any pending flu epidemic from China.
There are positives and negatives that come with this discussion. Namely, the ever pounding need to commercialize the legal industry and remove all Drug War stigma and barriers from the discussion.
CBD-only legalization is also a powerful answer to those who claim that if CBD is legit, then the police will not chance busting people, no matter how much THC is or is not in the offending substance in question.
These are also the same people frequently who also have a stake in some level of the industry as it legalizes. And this is also where some of the fiercest battles for regulatory control and definition have also begun to happen.
The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.
Where they have come to a head (see Italy), it appears that governments are indeed reconsidering the whole “insurance” if not “home grow” discussion. Not to mention, as a result, recreational after that. The conversation in Italy, of all places, right now, is a good indication of this trend. It is a conservative country in every way, yet it is the first to not only cancel a government controlled monopoly license, but also the largest country in Europe to again tinker with limited home grow of cannabis plants.
Ironically this is also the place where the most dedicated “CBD revolutionaries” have also hit. In places like the UK right now, the lack of appetite for EU regulatory control generally (see Brexit) has resonated, particularly with a pro cannabis crowd sick and tired of more delay on a topic whose day in the sun has finally come. If not more government wobbles on discussion on the medical side (see the recent NHS decision to ignore cannabinoids and chronic pain).
In other places like Europe however, and this certainly showed up at Davos, CBD is a hardy foot soldier if not cannaguerilla from the hills that is beginning to chalk up discussions if not yet wide-ranging sovereign victories.
This is absolutely clear to see in places like the African market (and Lesotho is about to become a hot ticket globally if not within the African continent). Indeed, the first seeds were sown several years ago).
Yes, it is ridiculous that CBD is being banned. And it is also obvious that governments are unwilling to be bankrupted over medical cannabis of any kind or THC concentration, and know they must also seek other ways to deal with the issue.
CBD, in other words, is a kind of Che Guevara that is going to take down a few of the established orders in this revolution that is now global. And for that very reason, taking on a character if not place at the table all of its own.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
