Tag Archives: legalize

The Need for Standardization in Medical Cannabis Testing

By Andrew James
2 Comments

There has been a move towards the legalization of cannabis for medical and/or recreational use across many countries and US states in recent years, leading to greater demand for accurate potency and safety testing. Despite this, there are currently no standardized regulations between states or countries for quality control including content, composition, adulterants, potency or levels of toxic residues. As such, in many cases where regulations are in place, testing is generally carried out at a small number of approved independent testing laboratories.

The need for self-regulation has led to the growth of portable gas chromatography (GC) being used in the field of cannabis testing.This lack of clarity makes it difficult for consumers to make informed decisions about what they are purchasing, an issue which could be damaging to the industry’s changing reputation. As it stands, producers of cannabis and cannabis-derived products can supply goods with potentially harmful contaminants such as fungi or pesticide residues, which are potentially threatening to human health. Most cannabis products sold legally in the US are required to be tested and labelled for THC, the chemical responsible for most of cannabis’s psychoactive effects. A US study found that as few as 20% of recreational cannabis products are accurately labelled with only 17% of products reviewed accurately labelled for THC content (i.e. within 10% of the labeled value). It also found 23% were under labelled, and 60% were over labelled.

If cannabis were to be categorized as a regulated pharmaceutical drug, it would be rigorously tested to comply with stringent rules and regulations regarding quality and safety of the product, as are all other drugs. However, as there is currently no centralized regulatory body that oversees this, the responsibility of quality assurance falls to the grower, manufacturer and sometimes the consumer.

The Need for Cannabis Analysis

The most common requirement when testing cannabis is positive identification and quantification of the total THC:CBD ratio. In a highly competitive marketplace, this information is important, as cannabis consumers tend to equate THC levels with price. In many instances, lower THC products are cheaper and higher THC concentrations make products more expensive. Without robust systems in place for sufficient testing, this information cannot be accurately determined, meaning the customer often cannot make an informed decision.

Pesticide use is surprisingly common in the cannabis cultivation industry

In addition to potency testing, one of the core issues facing the industry and by extension, the end consumer, is the prevalence of pesticides in cannabis products. In the Netherlands, the Ministry of Environment and Health reported that over 90% of cannabis plants tested had pesticides on them. While steps have been taken to tackle this, the lack of cohesion in testing standards combined with the onus on individual labs to carry out testing, has led to some issues within the industry.

Many individual retailers in the U.S. and internationally are self-testing for impurities such as pesticides, heavy metals and microbials. While there is a clear need for standard testing across all locations, the need for self-regulation at present has led to the growth of portable gas chromatography (GC) being used in the field of cannabis testing.

Using GC as an analytical tool 

With the increased need for quality control and quality assurance in the largely unregulated cannabis industry, technology is now more accessible to smaller companies and to people with minimal laboratory experience. There are a range of cannabis testing packages available for smaller individual labs which offer more mobile testing with affordable packages. The lower entry price makes GC analysis affordable for more laboratories while still delivering reliable, high quality results.

Portable GC instruments can offer high quality potency testing, pesticide screening, terpene and flavor profiling, and residual solvents analysis. These instruments can give growers and processors an accurate result of cannabinoid percentages, a fundamental piece of information for growers and dispensaries. Systems can be configured for manual injection or a range of autosampler options can be added.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

GC enables the rapid and accurate identification and quantification of the THC:CBD ratio. This is important for companies which are carrying out self-testing as it allows their customers to have assurances in the short term over the quality of their product, as well as reducing any potential risks to public health.

An example of this in practice is the use of GC by Dutch company Shamanics which carries out testing service for coffee shops in the Netherlands. The company conducts terpene analysis and potency testing to assure the quality of the products it supplies, with a portable GC, which offers the flexibility required without any established guidelines on testing in place.

When testing for potency using the GC, they look for total THC and CBD by converting the acidified versions of the cannabinoids into neutral forms within the heat of the GC injector. The process has flexibility which means that if they need to see both the acidified and neutral versions, they can do this by derivatizing the sample. The accuracy of this process is crucial to Shamanics and similar companies within the industry so that they can accurately judge the quality of a product, and relay this information to retailers and consumers.

The future of GC in standardized testing

While the growing availability of portable GC instruments and the increasing sophistication of individual labs means more companies are able to self-test products, there is still a significant hurdle to overcome in terms of standardising and regulating both the medical and recreational cannabis markets. Where regulation is brought in it should be consistent across states and countries and most importantly, it should be monitored and enforced. In the meantime, responsible producers are using the technology available to them to provide consumers with guarantees that their cannabis products are safe and of a high quality.

US Patent & Trademark Office Issues Guidance for Trademarking CBD Products

By Aaron G. Biros
1 Comment

Last week, the United States Patent and Trademark Office (USPTO) published an Examination Guide to provide further clarity for how they assess the legitimacy of trademarks for cannabis products. For the uninitiated, the 2018 Farm Bill, which President Trump signed into law on December 20, 2018, removed hemp-derived cannabidiol (CBD) from the Controlled Substances Act. In order to register a trademark in the United States, the mark must be used in a lawful setting, meaning that the USPTO does not register trademarks for products that violate federal law- even if it is legal under state law.

In their guidance document, the USPTO identifies the distinction between hemp and other cannabis varieties as the basis for either issuing or refusing a trademark registration. This means that in the trademark application, companies need to specify that the cannabis product is derived from hemp, or cannabis with less than 0.3% THC in dry weight.

The USPTO clarifies that applications for trademarks that involve CBD filed before December 20, 2018 will be refused, but if they amend the filing date to after that date, the registration will be examined. Below is a direct quote from their examination guide clarifying this:

For applications filed before December 20, 2018 that identify goods encompassing CBD or other cannabis products, registration will be refused due to the unlawful use or lack of bona fide intent to use in lawful commerce under the CSA. Such applications did not have a valid basis to support registration at the time of filing because the goods violated federal law. However, because of the enactment of the 2018 Farm Bill, the goods are now potentially lawful if they are derived from “hemp” (i.e., contain less than 0.3% THC). Therefore, the examining attorney will provide such applicants the option of amending the filing date and filing basis of the application to overcome the CSA as a ground of refusal.

The USPTO’s Examination Guide explicitly mentions the authority of the FDA to regulate products derived from cannabis, much like the 2018 Farm Bill’s language. There is still some confusion in the cannabis industry surrounding the marketing and sale of hemp products under FDA regulation.

FDAlogoUnder the Federal Food Drug and Cosmetic Act (FDCA), using a drug in a food or dietary supplement that is currently undergoing clinical trials is illegal (as is the case here- see Epidiolex for an example of CBD being used as an active ingredient in an FDA-approved clinical trial). According to the USPTO, this means that “registration of marks for foods, beverages, dietary supplements, or pet treats containing CBD will still be refused as unlawful under the FDCA, even if derived from hemp, as such goods may not be introduced lawfully into interstate commerce.”

Regarding trademarks for services involving “cannabis and cannabis production,” the USPTO also issued guidance. This section of the Examination Guide pertains to companies applying for a trademark that fall in the category of ancillary services, such as growing supply companies, lighting, nutrients, pest control and packaging, among other service providers. Basically, this section boils down to the same distinction the Farm Bill made between hemp and other varieties of cannabis. An applicant for a trademark needs to make clear their identification of services offered as involving cannabis containing less than 0.3% THC.

For a helpful guide breaking down what this means for cannabis companies pursuing a trademark registration, Christiane Schuman Campbell, partner at Duane Morris LLP, published this client alert about the USPTO’s examination guide.

HACCP

Implementing a HACCP Plan to Address Audit Concerns in the Infused Market

By Daniel Erickson
1 Comment
HACCP

The increasing appeal and public acceptance of medical and recreational cannabis has increased the focus on the possible food safety hazards of cannabis-infused products. Foodborne illnesses from edible consumption have become more commonplace, causing auditors to focus on the various stages of the supply chain to ensure that companies are identifying and mitigating risks throughout their operations. Hazard Analysis and Critical Control Points (HACCP) plans developed and monitored within a cannabis ERP software solution play an essential role in reducing common hazards in a market currently lacking federal regulation.

What are cannabis-infused products?

Cannabis infusions come in a variety of forms including edibles (food and beverages), tinctures (drops applied in the mouth), sprays (applied under the tongue), powders (dissolved into liquids) and inhalers. Manufacturing of these products resembles farm-to-fork manufacturing processes common in the food and beverage industry, in which best practices for compliance with food safety regulations have been established. Anticipated regulations in the seed-to-sale marketplace and consumer expectations are driving cannabis infused product manufacturers to adopt safety initiatives to address audit concerns.

What are auditors targeting in the cannabis space?

The cannabis auditing landscape encompasses several areas of focus to ensure companies have standard operating procedures (SOP’s) in place. These areas include:

  • Regulatory compliance – meeting state and local jurisdictional requirements
  • Storage and product release – identifying, storing and securing products properly
  • Seed-to-sale traceability –  lot numbers and plant identifiers
  • Product development – including risk analysis and release
  • Accurate labeling –  allergen statements and potency
  • Product sampling – pathogenic indicator and heavy metal testing
  • Water and air quality –  accounting for residual solvents, yeasts and mold
  • Pest control – pesticides and contamination

In addition, auditors commonly access the reliability of suppliers, quality of ingredients, sanitary handling of materials, cleanliness of facilities, product testing and cross-contamination concerns in the food and beverage industry, making these also important in cannabis manufacturers’ safety plans.

How a HACCP plan can help

HACCPWhether you are cultivating, harvesting, extracting or infusing cannabis into edible products, it is important to engage in proactive measures in hazard management, which include a HACCP plan developed by a company’s safety team. A HACCP plan provides effective procedures that protect consumers from hazards inherent in the production and distribution of cannabis-infused products – including biological, chemical and physical dangers. With the lack of federal regulation in the marketplace, it is recommended that companies adopt these best practices to reduce the severity and likelihood of compromised food safety.

Automating processes and documenting critical control points within an ERP solution prevents hazards before food safety is compromised. Parameters determined within the ERP system are utilized for identification of potential hazards before further contamination can occur. Applying best practices historically used by food and beverage manufacturers provides an enhanced level of food safety protocols to ensure quality, consistency and safety of consumables.

Hazards of cannabis products by life-cycle and production stage

Since the identification of hazards is the first step in HACCP plan development, it is important to identify potential issues at each stage. For cannabis-infused products, these include cultivation, harvesting, extraction and edibles production. Auditors expect detailed documentation of HACCP steps taken to mitigate hazards through the entire seed-to-sale process, taking into account transactions of cannabis co-products and finished goods at any stage.

Cultivation– In this stage, pesticides, pest contamination and heavy metals are of concern and should be adequately addressed. Listeria, E. coli, Salmonella and other bacteria can also be introduced during the grow cycle requiring that pathogenic indicator testing be conducted to ensure a bacteria-free environment.

Harvesting– Yeast and mold (aflatoxins) are possible during the drying and curing processes. Due to the fact that a minimal amount of moisture is optimal for prevention, testing for water activity is essential during harvesting.

Extraction – Residual solvents such as butane and ethanol are hazards to be addressed during extraction, as they are byproducts of the process and can be harmful. Each state has different allowable limits and effective testing is a necessity to prevent consumer exposure to dangerous chemical residues.

Edibles– Hazards in cannabis-infused manufacturing are similar to other food and beverage products and should be treated as such. A risk assessment should be completed for every ingredient (i.e. flour, eggs, etc.), with inherent hazards or allergens identified and a plan for addressing approved supplier lists, obtaining quality ingredients, sanitary handling of materials and cross-contamination.

GMPFollowing and documenting the HACCP plan through all of the stages is essential, including a sampling testing plan that represents the beginning, middle and end of each cannabis infused product. As the last and most important step before products are introduced to the market, finished goods testing is conducted to ensure goods are safe for consumption. All information is recorded efficiently within a streamlined ERP solution that provides real-time data to stakeholders across the organization.

Besides hazards that are specific to each stage in the manufacturing of cannabis-infused products, there are recurring common procedures throughout the seed-to-sale process that can be addressed using current Good Manufacturing Practices (cGMP’s).  cGMPs provide preventative measures for clean work environments, training, establishing SOPs, detecting product deviations and maintaining reliable testing. Ensuring that employees are knowledgeable of potential hazards throughout the stages is essential.Lacking, inadequate or undocumented training in these areas are red flags for auditors who subscribe to the philosophy of “if it isn’t documented, it didn’t happen.” Training, re-training (if necessary) and documented information contained within cannabis ERP ensures that companies are audit-ready. 

Labeling

The importance of proper labeling in the cannabis space cannot be understated as it is a key issue related to product inconsistency in the marketplace. Similar to the food and beverage industry, accurate package labeling, including ingredient and allergen statements, should reflect the product’s contents. Adequate labeling to identify cannabis products and detailed dosing information is essential as unintentional ingestion is a reportable foodborne illness. Integrating an ERP solution with quality control checks and following best practices ensures product labeling remains compliant and transparent in the marketplace.

Due to the inherent hazards of cannabis-infused products, it’s necessary for savvy cannabis companies to employ the proper tools to keep their products and consumers safe. Utilizing an ERP solution that effectively manages HACCP plans meets auditing requirements and helps to keep cannabis operations one step ahead of the competition.

Illinois Governor Announces Plan to Legalize Adult-Use Cannabis

By Aaron G. Biros
No Comments

Last weekend, Illinois Governor J.B. Pritzker announced the introduction of a bill that would legalize adult-use cannabis, allowing medical dispensaries to begin sales for anyone over the age of 21. According to the Chicago Sun Times, the major focus for Governor Pritzker on legalizing cannabis is on things like social equity and criminal justice.

Illinois Governor J.B. Pritzker

Rather than touting the tax dollars that could be raised, like other state governments are often eager to highlight, Governor Pritzker’s announcement was about racial equality and helping those disproportionately affected by the drug war. “We are taking a major step forward to legalize adult use cannabis and to celebrate the fact that Illinois is going to have the most equity-centric law in the nation,” Governor Pritzker told members of the media during a press conference. “For the many individuals and families whose lives have been changed, indeed hurt, because the nation’s war on drugs discriminated against people of color, this day belongs to you, too.”

The legislation includes a provision for automatically expunging about 80,000 convictions related to cannabis, allowing those with convictions to work in the newly-legal Illinois cannabis industry. It also includes a provision for license applicants to be designated as social equity applicants, where lawmakers are hoping to encourage minority-owned business growth. They plan on waiving fees as well as helping social equity applicants get better access to capital and business loans.

This is not the first time that Democrats in the Illinois state legislature have attempted to legalize adult-use cannabis. Back in 2017, state Representative Kelly Cassidy and state Senator Heather Steans, the two lawmakers sponsoring this bill, sponsored a legalization bill that failed to garner support. Back in late January of 2019, Governor Pritzker, Rep. Cassidy and Sen. Steans announced their plans for legalization. Introducing this bill to the legislature this week takes their plans and the state of Illinois one step closer to adult use legalization.

During the press conference, Sen. Steans mentioned they want to make sure revenue from the new market will benefit residents of Illinois. According to the Chicago Sun Times, the bill allows for 25% of tax revenue would go to helping those disproportionately affected by the drug war and 20% would go to mental health and substance abuse treatment.

That revenue, an estimated $170 million, will mainly come from licensing fees in 2020. Cannabis products with less than 35% THC content would be taxed at a fixed 10% rate, while products with more than 35% THC would be taxed at 20%. The bill would also allow people in Illinois to grow up to five plants at home.

Soapbox

Cannabis Pioneers vs. Cannabis Innovators: Who Has the Advantage?

By Jeff Arbour
No Comments

In today’s innovation marketplace, everybody wants to be the first. Tech and non-tech companies alike are racing to raise capital for crypto, blockchain and AI, yet these sectors and technologies are still not even close to mass adoption.

Today’s entrepreneurs are obsessed with disruption. While this is obvious in the world of tech, it may soon be overshadowed by the nascent cannabis industry in the United States. Every time a new state opens an application submission period for a new cannabis dispensary, hundreds of companies apply. Each new market and state have pre-existing demand. Until recently, obtaining cannabis was difficult for many and illegal.

Often, the latecomers who learn from pioneers’ mistakes are the ones who earn the greatest successes.

Most of these companies apply in good faith, only to run into unforeseen problems as the regulatory landscape changes. This is part of the risk inherent to pioneering and disrupting industries. Often, the latecomers who learn from pioneers’ mistakes are the ones who earn the greatest successes.

The Difference Between Pioneering and Innovating

In the world of commerce, paving the way for a new product to hit the market is usually a thankless, time-consuming task. It exposes the weaknesses of the market’s operators and invites newcomers to disrupt the already unstable status quo.

Although household names like Levi’s and Wells Fargo owe their success to the California Gold Rush, historians pay relatively little attention to the hundreds of thousands of casualties the Gold Rush caused. Pioneers paved the way, and innovators – like Levi Strauss – profited from the result.

Similarly, when it comes to cars, Peugeot and Tatra are not household names like Ford and Honda. Henry Ford’s assembly line innovations and Honda’s unbeatable factory flexibility led to those younger companies becoming far more successful than their older counterparts.

Pioneers change the way an industry operates. Airbnb did not succeed because it offered superior service compared to the powerful and deep-pocketed hotel industry. It succeeded because it improved the model that HomeAway and VRBO launched years prior – and did so in a way that undermined the hotel’s typical strengths while capitalizing on their weaknesses.

Pioneering disruption is not equal to innovation, and the cannabis industry will follow the same course.

Although pioneering the creation of new business models is an admirable thing to do, it’s not for everyone. Airbnb has been fighting regulators since the very beginning. The company has been forced to pay fines and taxes that simply didn’t exist until Airbnb’s business model came into being.

Uber’s regulatory troubles regularly make headlines around the world. Although it successfully disrupts every market it enters, established taxi companies and newcomers like Taxify often get the last laugh when they implement Uber-like functionality into existing business models. Uber found it too difficult to compete in China and sold its business to local newcomer Didi Chuxing.

All of these cases demonstrate that being the first or early to introduce a business concept comes with many challenges. Pioneering disruption is not equal to innovation, and the cannabis industry will follow the same course.

Cannabis Industry Pioneers vs. Innovators

In the cannabis industry, being the first often meant living in constant fear of being arrested. During the early years of medical cannabis legislation, it was unclear whether federal authorities would raid and prosecute cannabis cultivators and dispensaries.

Every new cannabis market offers important, expensive lessons to future cannabis entrepreneurs:

  • California changed its cannabis product packaging laws several times before its market went live.
  • Oregon’s lack of state inspectors led to a laboratory testing bottleneck and an upsurge in black market cannabis diversion that the state’s last audit called “currently unstoppable.”
  • The two largest medical marijuana cultivation facilities in Illinois cost about $40 million to build, yet they compete over a market of less than $10 million.
  • Major pioneers like Medmen have paid enormous sums of money to gain entrance into regulatory environments they can’t accurately predict profits from.

Newer cannabis industry entrepreneurs are taking notice of all these obstacles and implementing plans to overcome them. It’s likely that the next generation of medical and recreational dispensaries will have far greater success than today’s biggest names, primarily due to this fact.

Consider the fact that all three of the S&P’s biggest cannabis industry companies have valuations far in excess of their actual sales. It is possible that these large, deep-pocketed organizations will generate enough revenue to justify their valuations, but in the meantime, newer players will enter the picture with greater responsiveness and startup efficiency.

Newcomers to the cannabis industry are setting themselves up for success with highly targeted business objectives, strong executive teams and high-impact advisors. They are navigating the regulatory landscape with more agility than early cannabis pioneers can muster, obtaining lower price-to-sales ratios in the process.

Cannabis entrepreneurs need to be creative in their assessment of the opportunities these new environments create.

This is the hallmark of innovation. While disruptions and inventions typically take the form of new products or services, innovations expand marketplaces and lay the groundwork for new interactions between economic actors in those marketplaces.

What Tomorrow’s Cannabis Innovators Can Do Now

States like Pennsylvania, New York, and New Jersey are currently leaning towards recreational marijuana legislation like those currently in place in Colorado and California. Cannabis entrepreneurs need to be creative in their assessment of the opportunities these new environments create.

Opening a cannabis company is no small task. As regulators gradually come to agree on the requirements each state will ask its business owners to meet, the next generation of pioneering cannabis entrepreneurs will have to adapt. At the same time, a relatively small contingent of innovators – the new generation of Levi Strauss’s – will coincide to provide much-needed products and services to the incoming rush.

These innovators will not be limited to one side of the industry. Innovation thrives on integration, and tomorrow’s cannabis entrepreneurs are going to develop streamlined solutions for tackling today’s inefficiencies in ways that simply are not possible right now. These lean, sophisticated startups will use that path paved by the first generation of cannabis industry incumbents.

Cannabis innovators will need to develop solutions for minimizing the costs and complications of setting up companies in highly regulated environments. This can mean anything from developing superior seed-to-sale tracking POS integrations to building a more efficient supply chain and a path to the consumer.

With luck, the next generation of cannabis entrepreneurs will look to the past when informing their strategic decisions for the future.

Matt Engle
Soapbox

Insurers Must Play Catch-Up to Meet Cannabis Industry Needs

By Matt Engle
No Comments
Matt Engle

As the cannabis industry continues to grow, demand for insurance products is also increasing. While insurers have been cautious about entering a market that carries the stigma of a Schedule I drug, the cannabis industry is clamoring for insurance coverage options tailored to meet the needs of key players— distributors, growers, processors and retail dispensaries.

The escalating need for insurance products tailored to these cannabis business sectors has not expedited an increase in coverage offerings. The slow entry of insurance carriers into the cannabis sector can be tied to a reluctance to insure an industry with emerging and often unknown risks. This will begin to change as more information becomes available on what loss ratio trends look like in the cannabis industry.

For now, there is a wait-and-see stance held by insurance carriers. This presents a major concern for cannabis-related businesses that are subject to risk at every stage of the supply chain, with particular exposure for theft, general liability, crop loss, and product liability.some degree of crime and theft coverage is needed for these enterprises to help manage the risks associated with a cash-based business

Theft

For cannabis companies, the use of paper currency is a huge part of their risk exposure. Federal banking regulations have limited these businesses to dealing mostly in cash, which makes them a prime target for crime and fraud. Currently, only one carrier will insure coverage for cash and theft risk, and the policy is limited to $1 million for most risks. This is inadequate coverage since many operators have more than that amount on-site.

In states with legislation legalizing cannabis, the cannabis sector will be able to move away from operating in cash if Congress passes the Secure and Fair Enforcement (SAFE) Banking Act, which would protect financial institutions from liability for federal prosecution that could arise from servicing cannabis-related businesses authorized under state law. Until banking regulations give the cannabis industry the ability to operate as legitimate businesses with the stability and safety that would deter criminal activity, some degree of crime and theft coverage is needed for these enterprises to help manage the risks associated with a cash-based business.

General Liability

Cannabis-related businesses need the same general liability coverage as other businesses to protect their premises and operations from lawsuits involving public contact. However, standard general liability policies—which exclude Schedule I substances from coverage—were not created with cannabis businesses in mind. It is still difficult for these businesses to obtain adequate general liability as a result of the legal uncertainty associated with the industry.

Product Liability

Product liability exposures for cannabis businesses encompass a wide range of areas, including edibles, vaporizers, pesticides, mold/fungus, misrepresentation, label claims, breach of warranty, deceptive practices, and failure to warn.

A major area of exposure concerns accidents resulting from impairment. A cannabis cultivator, processor, distributor, or retailer potentially may be considered liable in the event a product defect results in injury after reasonable use or when label defects fail to warn users that a product may have psychoactive effects.

Another area of risk exposure involves products that contain THC, the psychoactive compound that gives cannabis users a high. As the number of THC-containing products such as edibles and tinctures increases, so does the potential exposure to product liability claims for manufacturers and retailers.

The California Cannabis Track-and-Trace (CCTT) system also has implications for product liability. The CCTT is a statewide system used to record the inventory and movement of cannabis and related products through the commercial supply chain. All state cannabis licensees, including those with licenses for cultivation, manufacturing, retail, distribution, testing labs and microbusinesses, are required to use this system. The product liability impact lies in its capacity to determine responsibility along the supply chain from seed to sale.

For example, if a plastic vape pen explodes, a product liability lawsuit could have repercussions for many touch points across the supply chain beyond the manufacturer of the pen–all of which can be identified through CCTT. Entities that touch cannabis products such as soil suppliers or delivery persons also have product liability risk exposure. Personal injury attorneys can find incident-related parties easily and determine liability. This makes it particularly important to add these parties to the policy as additional insureds to help reduce claims exposure.

Crop Loss

Another area of concern for risk exposure is crop loss. Crop insurance is generally hard to obtain due to the significantly different nature of cannabis crops compared to traditional crops like corn or soybeans.

Fires in Sonoma County devastated cannabis crops in Northern California back in 2017.

An indoor crop insurance policy covers cultivators when there is loss resulting from threats such as fire, theft, and sprinkler leakage. However, crop insurance policies generally do not cover losses resulting from mold, rot, disease, changes in climate, or fertilization issues. Many growers forgo this coverage and instead elect to absorb losses and regrow their crops.

Outdoor crop coverage is generally unavailable, or the cost is prohibitive. Any potential for writing outdoor crop insurance for the cannabis industry essentially disappeared as a result of the recent wildfires in California. These devastating fires highlighted the pressing need for property damage and business interruption coverage for growers and dispensaries and other downstream businesses whose supply was disrupted. This lack of available outdoor crop insurance is one of the more notable gaps in available cannabis business insurance coverage.

While cannabis businesses operating in states that have legalized medical and/or recreational cannabis use have challenges getting adequate insurance coverage, there is some good news on the insurance front for those in California. Last year, California’s insurance commissioner announced approval for carriers to offer insurance coverage specifically to cannabis businesses. The state also approved a cannabis business-owners policy (CannaBOP) program that provides a package policy containing both property and liability coverage for qualifying dispensaries, distributors, manufacturers, processors and storage facilities. Colorado is on the verge of being the second state to approve its version of a CannaBOP program.

While more insurance carriers are beginning to write cannabis coverage, the limited insurance options and policies with restrictive plans currently offered todaydo not meet the needs of the cannabis industry. Insurers must catch up to the coverage requirements of this sector by offering more options tailored to growers, retail dispensaries, processors and distributors with better terms and better pricing.

european union states

Why International Trade Agreements Are Shaping The Cannabis Industry

By Marguerite Arnold
No Comments
european union states

If you have wondered over the past several years, why the big Canadian companies (in particular) are following the global strategy they are, there is actually a fairly simple answer: Newly implementing trade agreements, particularly between Europe and North America.

More specifically, they are highly technical trade agreements that are also called Mutual Recognition Agreements, (or MRAs).

In fact, look at the schedule of the MRA agreements signed between the U.S. and individual EU countries over the last several years, and it also looks like a map of the countries that have not only legalized at least medical cannabis, but where the big Canadian companies (in particular) have begun to establish operations outside of their home country.

But what is going on is actually more than just CETA-related and also will affect cannabis firms south of the Canadian-U.S. border.

All of these swirling currents are also why the most recent MRA to come into full force in July this year, between the U.S. and Europe, is so interesting from the cannabis perspective. Even before federal reform in the U.S. If this sounds like a confusing disconnect, read on.

What Are MRAs?

MRAs are actually a form of highly specialized trade agreement that allow trading countries to be certain that the pharmaceuticals they purchase from abroad are equivalent to what is produced at home. This includes not only ingredients but processing procedures, production plant hygiene, testing, labeling and more.

When it comes to the  EU-US MRA agreement, this means that individual states of the EU can now recognize the American Food and Drug Administration (or FDA) as an effective federal regulator of American pharmaceutical production that is equal to the procedures in Europe. US GMP standards, in other words, will be recognized as equal to those of EU states.

This will now also, by definition, include GMP-certified medical cannabis formulations.

What is so intriguing, however, is how this development will actually place certain American (and Canadian) manufacturers in a first place position to import cannabis into Europe ahead of the rest of the American cannabis industry.

What Are Mutual Recognition Agreements All About?

One of the most important quality and consumer safety aspects of establishing a clean supply chain is tied up in the concept of GMPs (Good Manufacturing Practices). These are procedures, established by compliant producers of pharmaceuticals, to ensure seed (or source) to sale reliability of the medication they make. In the cannabis industry, particularly in the advent of Canadian-European transatlantic trade in cannabis, this has been the first high hurdle to accept and integrate on the Canadian side.

GMPIf European countries recognize a country’s GMP certifications are equivalent to its own, in other words, and cannabis is legal for export, a country can enter the international cannabis market without facing bans, in-country inspections and the like. In the interim, imported products still have to be batch tested until the agreements are fully accepted and operational.

Israel, for example, already had an MRA with the EU, and medical cannabis is legal in the country. However, Israel was prevented from selling cannabis abroad until a legislative change domestically, passed on Christmas Day.

That is why the MRA agreement between the US and EU with Canadian companies in the middle also put both Israeli and U.S. firms at an extreme disadvantage in comparison. Both in entering the market in the first place, and of course associated discussions, like the German tender bid. That is now changing- and as of this year.

A Specialized Map Of Global Medical Cannabis Exporters

Ironically, what the new US-EU MRA could also well do is create a channel for pharmaceutical cannabis from the United States to Europe (certainly on the hemp and CBD front) just as Israel is expected to enter the international cannabis export industry (later this summer or fall). It could well be also, particularly given the Trump Administration’s tendency to want to not only “put America first” if not pull off “a better deal” in general and about everything, that this is why President Trump offered the delay to Israel’s president Benjamin Netanyahu in the first place.

Regardless of the international individual developments and subtleties however, what is very clear that from the time the first bid stalled in Germany in the summer of 2017 until now, the U.S.-EU MRA has been in the room even if not named specifically as a driver.

For example, the FDA confirmed the capability of Poland and Slovenia to carry out GMP inspections in February of 2019.  It was only last fall that Aurora pulled off its licensing news in the former (on the same day licensing reform was announced by the government). Denmark was recognized in November of last year during the first year of its “medical cannabis pilot progam.” Greece was recognized in March 2018. Italy, Malta, Spain and the UK came online in November of 2017.

Overlay this timetable with a map of cannabis reform (and beyond that, cannabis production) and the logic starts to look very clear.

The upshot, in other words, is that while cannabis still may be “stigmatized” if not still “illegal” in many parts of the world, more generalized, newly negotiated and implementing, specialized global trade agreements between the US, Europe and Canada in particular have been driving the development of certain segments of the cannabis industry globally and since about 2013.

The Biggest News?

As of this year, as a result, expect at least from the GMP-certified front at least, that such international trade will also include medical cannabis from the U.S.

Want an example of the same? First on that list if not early in the game will now undoubtedly be Canadian-based Canopy Growth, with Acreage on board, headquartered in New York.

Marguerite Arnold

Canopy Growth Makes Multi-Billion Dollar Conditional Acquisition Deal

By Marguerite Arnold
1 Comment
Marguerite Arnold

The first German cannabis bid may have come to an end more or less, and with a whimper rather than a bang (not to mention the inevitable still-to-be-settled legal challenges). However even as the dust settles, one of the biggest “names” in cannabis and the company formerly expected to win at least a few of the tender lots is looking elsewhere.

Namely Canopy Growth, which was a finalist in the first round of the tender, has not shown up as a finalist firm in Germany this time (at least not so far).

However, it is clear the firm has other intentions afoot, namely U.S. expansion.

In an unprecedented move, Canopy announced its intent to buy the largest U.S. based producer of cannabis, a firm called Acreage Holdings, just before Easter. The conditional deal is being consummated in both cash ($300 million) plus stock swaps, and will not finally close until federal reform has come in the U.S. In fact, the deal makes the bet that the entire issue of U.S. federal reform will be solved within the next decade.

Canopy_Growth_Corporation_logoIn the meantime, however, what this also does is place one of the world’s largest cannabis companies in the middle of what is largely seen as the world’s most valuable overall cannabis market. Further it does so in an environment where the company benefits from Acreage’s considerable market and political clout. Former speaker of the U.S. House of Representatives John Boehner (a fierce opponent of legalization until it was personally convenient and profitable) is on the board of Acreage.

But there are those who might still be confused about why this deal happened. Canopy after all is fond of saying that its first focus is the “more valuable” medical rather than recreational market. And the U.S. market has many challenges still, that stem from a lack of federal reform. In fact, Canopy has frequently said in the past that they would not enter the U.S. until federal reform occurs. What gives?

What The Deal Also Does…

It is not “just” entry into the U.S. recreational market, albeit still on a state level that is significant about the deal. That starts with its timing.

When trying to understand the motivations of Canadian cannabis companies, especially ones who have eschewed the U.S. market in the past (at least until federal reform passes), it is also necessary to understand that they operate in a shifting world of global strategy that is never as straightforward as one might think. And often has nothing to do with cannabis per se.

Namely, while this deal places Canopy in the middle of the U.S. state industry it also does something else. It positions Canopy as a U.S. producer just two months after a new international pharmaceutical trade deal went into force (on February 8) called an MRA.

MRA agreements, also known as Mutual Recognition Agreements, are essentially trade deals between countries to accept the equivalency of their pharmaceutical production and supply chain.

On the cannabis front, the existence of MRAs between existing countries as cannabis has become legal, has also largely dictated the new international cannabis trade (see Canada and Germany as a perfect example) although this has been held as a closely held secret by the largest cannabis company executives (some of whom have previously denied that this was driving their expansion across Europe).

However, thanks to the agreement on this MRA in February, as of July of this year, Europe and the U.S. will formally kick off a situation where the European and therefore German health authorities will formally recognize American GMP processes.

That means that on the pharma front, Canopy has also essentially re-entered the European market, albeit by a bit of a backdoor. It also means that Canopy can immediately start to import cannabis drugs at least, made in the U.S. into the European and by extension, German market.

Cannabis drugs have been going in the opposite direction across the Atlantic to the U.S. for at least a year now (see the GW Pharma’s Epidiolex adventure last year). And further over the U.S.-Canadian border if now only bound for academic research (see Tilray).

It also may mean that they can import medical cannabis itself to be used as “medicine” or processed into one in Europe.

Does This Mean That U.S. Federal Reform Is Imminent?

Not necessarily. In fact, keeping the U.S. market in general out of the global cannabis trade, while allowing the top companies to participate both in the cross-state market and the global pharmaceutical one benefits the biggest companies. Conveniently, this also allows U.S. cannabis “pharmaceutical” producers to enter the EU in force just as Israel is expected to (third quarter this year). This also puts the “deal” U.S. President Trump and Israeli President Netanyahu cut on the subject to delay Israeli sales in an entirely new light (and one that should outrage both Americans and Israelis in the industry on this front even more). Not to mention every European hopeful producer unaware of the larger game afoot.

That said, what federal U.S. legalization will do is drop the operating costs of the larger U.S. entities now engaged in multi-state operations.

Cannabis in other words is not likely to be legalized in the U.S. before the next presidential elections for reasons that have everything to do with the profits of a few – and for that reason will certainly be a major theme in the next national political race.

And in the meantime, the biggest companies, Canopy included, are not only laughing all the way to the bank (although their shareholders are another story), but setting themselves up to be at the ground floor DNA of the global cannabis business as it establishes itself in every country of the world.

Jennifer Whetzel

Eating Your Words: How to Avoid Legal Issues Marketing Cannabis Consumables

By Jennifer Whetzel
1 Comment
Jennifer Whetzel

Selling in a grey market isn’t for the faint of heart. You have to deal with the stigma surrounding your products and services, the potential for legal troubles, along with bureaucratic hurdles that all businesses face.

Acceptable marketing language surrounding consumable THC and CBD products encapsulates all of these issues, and it’s why everyone in the industry needs to pay close attention to what they’re saying. One innocent turn of phrase could have the Food & Drug Administration (FDA) shut down your business faster than you can say, “Oops.”

Avoiding this fate means making some adjustments to how you think about your marketing language, but this knowledge quickly becomes rote. Take a moment to learn how to protect yourself so that you can run your business rather than run afoul of the law.

Food, Drugs and Dietary Supplements

Scroll through Instagram for a few minutes and you’ll encounter a deluge of companies making claims about cannabis and CBD products. Many, if not most, are going about it incorrectly. Part of the confusion surrounds the fact that under the FDA’s rules, foods, drugs and dietary supplements are treated differently.

FDAlogoHow does the FDA decide what’s what? Based on how you advertise the product. If labeling suggests the substance is “intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease, or is an “article” (other than food) intended to affect the structure or any function of the body of man or other animals,” the FDA will regulate it as a drug.

The language and regulations surrounding drugs are extremely strict. On December 20, 2018, the FDA put out a statement reiterating that these rules are in effect for cannabis products. In other words, you can only make a drug claim if you have received approval from the FDA on your New Drug Application (NDA). Since approval requires hundreds of millions of dollars worth of clinical trials, this option is out of reach for most companies.

The rule states that you may not say that your product diagnoses, cures, mitigates, treats or prevents any disease, or any recognizable symptom of a disease. Disease is defined as: damage to an organ, part, structure, or system of the body such that it does not function properly (e.g., cardiovascular disease), or a state of health leading to such dysfunction it (e.g. hypertension). Examples of diseases would include cancer, multiple sclerosis, epilepsy, autoimmune diseases, Lyme disease and more. In other words, you couldn’t say your product “prevents memory loss due to Alzheimer’s” or “treats symptoms of fibromyalgia.”

If you’re making any claims about curing anything in your cannabis business name, product name, packaging, web copy, advertising or marketing materials, you are at risk for breaking these rules and getting caught. The FDA’s regulations dovetail with the Federal Trade Commission’s truth-in-advertising laws, which state that your claims must be backed by legitimate research (such as peer-reviewed journal articles or double-blind studies) and must not mislead consumers. These rules are already being enforced within the cannabis industry, so pay close attention to what you’re putting out there.

An example of a warning letter the FDA sent to a CBD products company making health claims

However, you can’t avoid penalties by using this kind of language and claiming your product is a dietary supplement or food, either. According to the FDA, products that contain THC or CBD cannot be sold as dietary supplements. Their reasoning for this decision is that THC and CBD are active ingredients in FDA-approved drugs, such as Epidiolex and Dronabinol. Active ingredients in approved drugs may not be introduced into the food supply as dietary supplements or otherwise.

The language rules surrounding food can be equally complex. Foods approved by the FDA can make nutritional claims about how a nutrient impacts the structure/function of the body, such as “Calcium builds strong bones.” The problem for cannabis products is that these statements need to be authorized or qualified by the FDA and have significant scientific evidence and consensus. However, this consensus doesn’t exist for THC and CBD, meaning that you’re barred from making these kinds of claims.

Note that these rules don’t just apply to human supplements. They also apply to ones for pets. Many people don’t realize that a supplement for a pet is considered an “illegal drug of low regulatory concern.” But if you add in THC or CBD, a supplement becomes an illegal drug of—you guessed it—higher regulatory concern.

At a Loss for Words?

By now, you may be wondering what you can actually say to market your product; it may feel as though there are more restrictions than guidelines. Fortunately, the FDA hasn’t left us completely out at sea.

Just because we’re in a strange place under federal law operating our businesses every day doesn’t mean that we should disregard fundamental rules and regulations that all businesses must follow. The FDA published a final rule in the Federal Register in 2000 defining strict rules that govern the types of statements that may be used on a label without prior review of the agency. These are called structure/function claims. According to the FDA, “Structure/function claims may describe the role of a nutrient or dietary ingredient intended to affect the normal structure or function of the human body.” In contrast, statements that claim to diagnose, cure, mitigate, treat or prevent disease require prior approval by the FDA and are only for products that are approved drugs. Don’t use any of those words. Ever.

You can use the following words in your cannabis product names, advertising or marketing, as long as you’re not connecting them to a disease state: restore, support, maintain, raise, lower, promote, regulate, stimulate. You must specifically state that the claim relates to a non-disease condition; otherwise, you’ll be in trouble with the FDA. To go back to an earlier example, you cannot say that your product “prevents memory loss due to Alzheimer’s.” However, stating that your product “helps maintain a healthy brain” is fine.

Just because we’re in a strange place under federal law operating our businesses every day doesn’t mean that we should disregard fundamental rules and regulations that all businesses must follow. Following these rules does more than keep our enterprises out of trouble. It reinforces the idea that our industry is responsible, legitimate, and—perhaps most importantly—here to stay.