Tag Archives: line

Your Cultivation Plan is the Most Important Factor to Increase Your Yield

By David Perkins
No Comments

Having a well-built grow room with adequate lighting, the ability to properly control the environment, proper nutrient feedings, a good pest management plan, well trained employees and an experienced cultivation manager are very important to the overall output of cannabis plants. However, even if you have all those measures in place, there’s no guarantee of success. One factor that is often overlooked is how many harvests you can get per year, as clearly the more harvests you can get in a given time period, the more likely your chances of success are in this competitive industry. This is why having a good cultivation plan in place, with proper foresight and planning, is so essential to success.

Increasing yield or production output in a cannabis cultivation facility can often be as simple as having the right cultivation plan in place to ensure that you are harvesting the maximum number of times per year. All it requires is a well thought out plan, and best of all, that does not cost any money if you have someone with enough cultivation experience assisting you and will earn back more than the cost of paying a consultant to get such a plan in place.

In this article I will explain why changing nutrients, grow media or even a cultivation manager may not necessarily increase yield, quality or your chance of success. What you should be focusing on is your cultivation plan and the scheduling of your cultivation cycles.

  1. Why changing nutrient companies may not necessarily increase your yield
Nutrient dosers are used to inject fertilizer directly into irrigation lines

For the most part, nutrient companies use the same ingredients in their product lines and often buy them from the same source, but they combine them in different forms and ratios to create their “unique” product. You can go to a grow store, pick five different nutrient products, read the labels and compare the different nutrients in each one. You will find for the most part that they are very similar. Generally speaking, you could pick any one of those five nutrient companies and have great results. Mixing nutrients into a nutrient tank needs to be done precisely and if your employees are not doing it properly this can lead to plant health issues. In larger cultivation facilities, often nutrient dosers are used to inject fertilizer into the irrigation lines without having to mix nutrients. However, if the dosers are not set to the proper ratios, this can also lead to plant health issues.

There are a few companies that I really like that have a different approach to plant nutrition, which saves time and can prevent human error associated with mixing and applying liquid nutrients. Soilscape solutions, Organics Alive and Beanstock Agriculture all have nutrient lines that are intended to be used with soil or soilless media that can be amended into the soil which provide a slow steady release of nutrients that the plants can uptake as needed. This avoids the risk of human error in repeatedly applying liquid nutrients to the plants.

  1. Why changing grow medium and nutrients will not necessarily improve your yield but may increase yourquality

Whether it is rock wool, coco fiber, a soilless mix or living soil, everything has a limit. Giving your plants the proper amount of water and the frequency at which you water, along with having sufficient room for the roots to grow are key factors to ensuring plant health. If your plants aren’t getting watered properly, no matter what media you are growing in, you will be having problems. Changing things like grow media won’t result in instant success, as there will always be a learning curve when making changes to your cultivation. If you cannot adapt quickly enough, you can quickly create major problems.

plebanisoil
Changing things like grow media won’t result in instant success, as there will always be a learning curve when making changes to your cultivation.

You would be better off to master the grow media you are currently working; you will have more chance of success making slight alterations to your current media than you will if you switch your grow media altogether. There are so many different nutrient lines, soil companies, coco coir companies and the truth is any of them can lead to success.

Changing grow media and nutrients do play a large role in quality though. With cannabis being legalized in many states, the overall quality of cultivation inputs have increased, especially nutrients. However, in general, with some exceptions, the quality of cannabis has not necessarily increased along with the increase in quality of nutrients. One exception: I would argue that switching from salt nutrients and rock wool, to organic living soil will result in an improvement to the flavor, quality and terpenes of the cannabis.

A lot of people use rock wool with salts because it’s easier to scale up than if you are growing in soil, but some quality is also sacrificed. Soil is heavy and messy and most people throw their soil away which takes a lot of money and labor to do. Reusing your soil is one of the best ways to save time, money and increase quality. I had a friend that grew the same variety, same lights, same ventilation but grew hydroponically with salt-based nutrients and he would always say the cannabis I grew, organically, tasted better. The same was true when we grew the same variety outdoors. He used salt-based fertilizer, I used amended soil with water. There wasn’t really a comparison in flavor and the yield was not compromised either! This was his opinion not mine.

I think the vast majority of consumers have not seen the type of quality that someone in Northern California who has been smoking and growing for 20 plus years has seen. Quality is relative to what you have been able to acquire. Most people especially nowadays will never see the quality that used to be common when we didn’t treat the sacred herb like a commodity. When you do it for the love of the plant it shows. Remember, quality is relative to your experience and if salty weed is all you know, you are probably missing out.

  1. Why changing your Cultivation manager may not necessarily increase your yield

Every cultivation facility should have an experienced cultivation manager who is knowledgeable in the areas of nutrient requirements, pest management, environmental requirements, managing employees and overall facilities operations. If a grow room cannot sustain the proper environmental set points, blaming the problems and issues that arise on the cultivation manager is not fair. It is a common problem in the cannabis industry – the owners of a company are not seeing the results that they want and think that by replacing the cultivation manager it will solve all their problems. In reality, often the problem results from upper management or owners of the company not providing the cultivation manager the tools necessary to perform their job at the highest level. Another common problem is when owners fire the cultivation manager and replace them with lower-level employees to manage the facility. The problem with this is those employees do not have enough experience nor the attention to detail to successfully run a cultivation facility. The result is that yield and quality suffer tremendously.

  1. You should be harvesting every 60-70 days
If you are cultivating strains that finish flowering in 60 to 70 days you should be getting five harvests per year.

The reality is there is no one specific thing you can try or buy that will result in success. It is everything combined, the HVAC system, lights, genetics being grown, water quality, air quality, root zone temperature, ability to control environment, having a clean facility, disease free plants, knowledgeable cultivation manager etc. that are required to operate a successful cultivation.

But all of that is less important to yield than a good cultivation plan. Cultivation methods directly tie into the overall production of a facility. But, regardless of whether you’re growing in soil, hydroponics, using LED or HPS, have low or high plant counts, if you don’t have the ability to harvest a grow room, clean and replant within a very short amount of time (ideally one or two days) then you’re going to be losing out on profit.

If you’re cultivating strains that finish flowering in under 60 days you should be getting six harvests per year. If you are cultivating strains that finish flowering in 60 to 70 days you should be getting five harvests per year. To do this, you will need to have the appropriate amount of plants that are ready to be flowered to refill your grow room or greenhouse ready to flower. With a little bit of planning and foresight you will be able to do this, and you will be on your way to producing your highest yield potential.

If you are struggling to have enough plants that are ready to flower once you are done harvesting and cleaning your grow room, having trouble planning your cultivation schedule to maximize production, or struggling to maintain a mother and clone room to supply your own plants or planning for the appropriate amount of labor, contact Floresco Consulting and talk with one of our cultivation advisors to get you back on track. We can guide you to ensure you are harvesting, cleaning and replanting every 60 days. Contact us today to get your facility producing at its maximum potential.

A Q&A with George Mancheril, Founder & CEO of Bespoke Financial

By Cannabis Industry Journal Staff
No Comments

Bespoke Financial was the first licensed FinTech lender focused on the legal cannabis industry. Founded in June of 2018, Bespoke offers four types of lending products: Invoice financing, inventory financing, purchase money financing and a general line of credit. With just over two years of originating loans to clients, they have benefitted from being a first mover in the cannabis lending space.

George Mancheril is the founder and CEO of Bespoke Financial. He has over fourteen years of experience in finance, with a special focus on asset-based lending, off balance sheet financing of commercial assets and structured credit. Following a stint with Goldman Sachs, he worked at Guggenheim Partners Investment Management’s Structured Credit Group in Los Angeles where he worked on structuring esoteric asset financing for a variety of commercial assets including airplanes, container leases and receivables.

Since 2018, Mancheril and his team at Bespoke Financial have deployed over $120 million in principal advances without any defaults and across eleven states. We sat down with Mancheril and asked him about the history of his business, how it’s been received so far and how the past few years of financial activity in the cannabis sector might shape the future.

Cannabis Industry Journal: What is Bespoke Financial in a nutshell?

George Mancheril: Bespoke Financial is the first licensed FinTech lender focused on the legal cannabis industry. Bespoke offers legal cannabis businesses revolving lines of credit that address the top problem in the industry – lack of access to non-dilutive, scalable financing to capitalize on growth opportunities and improve profitability. Due to the federal illegality of cannabis, traditional banking institutions cannot work with our clients even though these operators are working within the legal regulatory framework of their state. Bespoke solves this problem for businesses across the cannabis supply chain along with ancillary companies affected by the lack of access to traditional capital markets.

CIJ: How does your company help cannabis businesses?

George Mancheril, Founder & CEO of Bespoke Financial

Mancheril: Bespoke Financial offers 4 lending products – all are structured as a revolving line of credit but each allows our clients to access capital in a unique way based on their specific needs. Our Invoice Financing product, allows businesses to borrow capital against their Accounts Receivables in order to manage general business expenses, particularly if the borrower’s business growth is slowed due to a long cashflow conversion cycle. Inventory Financing and Purchase Money Financing allow our clients to finance payments to their vendors, which helps our clients achieve economies of scale by increasing their purchasing power. Lastly our general Line of Credit allows for the most flexibility for our clients to utilize our financing by either financing payments made directly to vendors or drawing funds into the client’s bank account to manage business expenses.

CIJ: I know the company is only a few years old, but can you tell me about your company’s success so far?

Mancheril: [Clarification, Bespoke was founded in June 2018 so we’ve been around for 3 years but we now have over 2 years of originating loans to clients.] Bespoke Financial has benefitted by being a first mover in the cannabis lending space as the first licensed lender specifically addressing the financing needs of cannabis operators, starting in early 2019. Over the past 2 years we have developed and refined our proprietary underwriting model to identify over 50 active clients spanning the entire cannabis supply chain. Since inception, Bespoke has deployed over $120 million in principal advances without any defaults to date and expanded our geographic footprint across 11 states. Our growth and success highlights our company’s expertise in structuring financing solutions which address the unique capital needs of cannabis companies.

CIJ: Can you discuss how the recent M&A activity, current and recent market trends, as well as the pandemic has affected your company’s growth?

Mancheril: The cannabis industry overcame a variety of challenges presented by the COVID-19 pandemic, ending the year with record sales in both new and existing markets. The support from state and local governments, evidenced by the industry’s essential business designation and the easing of regulations, coupled with increasing consumer adoption of cannabis combined to increase the industry’s demand for capital throughout the pandemic. Bespoke was well positioned to partner with cannabis companies across the supply chain and was proud to help our clients thrive during this pivotal period.

Jeeter was able to grow sales over 1,000% within the first year of working with Bespoke

Coming into 2021, the cannabis industry and investors shared a very positive outlook for the future based on the previous year’s experience and expectations of material easing of federal regulation. While M&A activity in the industry has increased over the past 6 months, the overall consensus has been that both the frequency of exit opportunities and the corresponding valuations will continue to increase as federal decriminalization opens new sources of capital and materially changes investors’ valuation assumptions. In general, we’ve seen cannabis companies focused on both capitalizing on the increasing opportunity presented by the industry’s organic growth and maximizing the benefits of future regulation changes by utilizing the resources and capital currently available to increase revenue, expand into new markets, and work towards profitability. All of these factors have further compounded the industry’s demand for financing and we expect to see continued growth in our lending activity in line with the industry’s growth.

CIJ: Who has been your most successful client?

Mancheril: We have a handful of cases studies and client success stories here on our website. One of the most exciting growth stories we have seen has been our client DreamFields whose in-house brand, Jeeter, is now the #1 pre-roll brand in the state of California. Prior to working with Bespoke, the brand was not ranked in the top 25 but was able to grow sales over 1,000% within the first year of working with us and achieve the #1 spot in their product category.

Canopy Growth Signs U.S. Distribution Deal

By Cannabis Industry Journal Staff
No Comments

Canopy Growth Corporation, the Canadian cannabis powerhouse moving its way throughout international markets, has signaled another move into the United States to push their new CBD beverage line. The company inked a deal with Southern Glazer’s Wine & Spirits, a large U.S. alcohol distributor.

Canopy_Growth_Corporation_logoThis follows the launch of their first CBD-infused beverage line sold in the United States, Quatreau. In the initial phase of the agreement, Southern Glazer’s will distribute the beverage line in seven states, with plans to expand that footprint considerably in the coming months.

Being a national distributor with a strong presence throughout the country, Southern Glazer’s will be moving Canopy’s beverage line in conventional retail stores. The press release seems to credit Canopy’s partnership with Constellation Brands as the catalyst for the new distribution deal. “The agreement also showcases the benefits of the company’s strategic relationship with Constellation Brands, the global beverage leader,” reads the release.

Back in 2018, Constellation Brands made a $4 billion bet on Canopy, but immediate profitability did not come to fruition. This new deal with Southern Glazer’s, as well as the launch of the Quatreau beverage line, seems to prove Constellation’s bet is beginning to pay off, or at least showing signs of a long term play for market share.

Flower-Side Chats Part 3: A Q&A with Harvey Craig, CEO Harvey’s All Naturals and Co-Founder of Boot Ranch Farms

By Aaron Green
No Comments

In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses integrate innovative practices in order to navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.

Large-scale agricultural practices can take a toll on soil health leading to inefficiencies over the long term. Harvey’s All Naturals is a Colorado-based company specializing in premium farm-to-table full spectrum CBD products. Harvey’s gets all of its hemp from Boot Ranch Farms, an off-grid sustainable hemp farm in Southern Colorado supplied by an artesian well.

We spoke with Harvey Craig, CEO Harvey’s All Naturals and co-founder of Boot Ranch Farms, to learn more about the benefits of regenerative agriculture, how he thinks about soil health, and how they produce their CBD products. Harvey started Boot Ranch Farms in 2014 after the passing of the Farm Bill and Harvey’s All Naturals followed shortly thereafter.

Aaron Green: How did you get involved in the cannabis and hemp industry?

Harvey Craig: I got involved at a very young age, as the youngest of eight kids, seven of which are boys, I was introduced to cannabis on the marijuana side first. As an engineer through the years, I’ve always been involved in creating very efficient growing systems for cannabis.

Harvey Craig, CEO Harvey’s All Naturals and co-founder of Boot Ranch Farms

In the early 2000s, I learned about CBD a little bit through experimenting with marijuana strains to help a friend who had Parkinson’s and also through the research performed by Raphael Mechoulem, an organic chemist and professor at the Hebrew University of Jerusalem in Israel. In 2014, when the Farm Bill made hemp legal, I dropped everything and went into it because I felt “this is what I need to be doing.”

Green: What is sustainable farming mean to you?

Craig: Sustainable farming to me means putting soil health and responsible natural growing practices at the forefront of all agriculture – regenerative processes for soil, in a nutshell. To me, soil health is one of the biggest problems in the United States right now. By regenerating and making our soils living, healthy and with a rich nutrient base we create an ecosystem that is good for human health and health all around.

Green: What do you mean specifically when you say, “soil health?”

Craig: Soil is living. A good natural soil has a living microbiotic structure inside it. There’s a living habitat that forms inside our soil over the years. Large scale agriculture in many cases has depleted or killed this living structure through readily accessible fertilizers and tilling practices.

Farmers understand the soil. There are practices we can undertake that are helping our living soils and helping the microbiotic habitat to thrive. Practices such as no-till technologies, rotating crops, using cover crops, not being a monocrop, responsible water use, healthy fertilizer and pesticide technologies, minimal processing, the list goes on and on…

When we talk about this thing called sustainability, I think it’s very important that we understand there are two sides of cannabis. There’s the marijuana and then there’s the hemp. We can’t put those two together – they’re governed very differently. Hemp became legal through the Farm Bill and is governed by the Department of Agriculture. Hemp is just like any other crop out there really. That means we can mix hemp in with other crops. It’s very much like corn and other crops in how it’s grown on a large scale, industrial basis.

Marijuana on the other hand is governed by each state’s regulatory commission. Those regulations make it very hard to mix in with general agriculture. So, when it comes to the marijuana side, unfortunately, it must be a monocrop. Most marijuana is grown in pots and pots are fine. However, if you are just growing in a pot and then throwing your soil away, that is not very sustainable. As it sits right now, in the marijuana industry there is really no sustainability, unfortunately. The energy use for the lights in indoor grows, for example, creates a huge carbon footprint and load on the electrical grid. I’m not trying to put indoor growing down, but that’s the way it is. The only way I foresee sustainability in the marijuana side of cannabis is to let loose a little bit on regulation and allow it to become a part of normal agricultural processes.

Green: What is it about tilling that degrades the soil quality?

Craig: When we till our soil, we’re turning the organisms in the soil up and we’re allowing the sun to dry them out. If it’s not done properly, you kill that soil structure.

Now, these little microorganisms in our soil create a healthy soil, but it doesn’t happen instantly, this takes years to create. Nobody has the time anymore, everybody’s “go go go” and “make it happen instantly”. So that gets destroyed. Now we have all these dead soils that everybody’s growing in and growers turn to factory-produced fertilizers with readily available nutrients.

When we are talking about cannabis, we can’t just look at monocropping. If you grow one crop in the same soil over and over, the soil is going to get depleted. One of the main things that we deplete is nitrogen and growing other crops, such as clover, can replenish that nitrogen. Growing cover crops protects the soil from the sun, creates nitrogen for the soil, and holds the water within the soil.

Instead of tilling, you can rotate with crops like root vegetables, radishes and other things that have deep root structures. Instead of tearing them up, just let them degrade organically and go back into the soil. Those deep root structures will also help aerate the soil.

Green: What is a farmer’s first approach?

Craig: Farmers want their land to be healthy. True farmers have a oneness with the earth and understand the earth. The farmer’s first approach keeps the farmer involved in creating new technologies for agriculture.

Green: Let’s say you’re a farmer that has land or recently acquired land that’s been industrially grown upon. How would you take that land and start fresh with a regenerative process?

Craig: The first thing you have to do is take soil samples and send them to a lab. That’ll tell you what you’re working with. Also, knowing a little history about the land helps as well. Was it used for grazing? Was it used for growing corn? What was it used for? Were organic practices used?

Then, there are many things you can do to start to regenerate your soil, but it takes time. In many situations, people don’t want to take that time. But what we’re learning is, the people and the farmers that do take that time often take a hit monetarily for the first two or three years. After that, once that structure is maintained, the natural health of the soil can be replenished. Crops will grow better, and they won’t spend as much money on fertilizers and pesticides in the long run because the microbiotic structure in the soil is creating a healthy ecosystem. When we destroy that ecosystem, it doesn’t come back easily or quickly. If there’s a little bit there, it can be regenerated with the right practices.

Green: I understand that the Boot Ranch is an off-the-grid farm. What was your motivation for either going off-grid or remaining off-grid?

Craig: I have a background in alternative energies and engineering, and when creating Boot Ranch Farms there was a lot that went into the sustainability side of it. The farm is extremely far away from the power grid for starters. So, an investment in solar for electricity was money well spent. My thought process was, why would I invest in bringing the wires in when I could actually save money and resources by creating a very efficient solar system and not be tied to the grid? Our farm is self-sustaining without being connected to any grid, which is one of the main reasons for remaining off-grid.

Green: I understand the farm is supplied by an artesian well. How do you monitor your water quality?

Craig: Well, we’re very fortunate. Existing natural water quality is one of the main reasons we decided to grow in the San Luis Valley. When you’re starting something new, you have to look at your financial side of things. Investing in a hemp farm is very different than the marijuana side because you won’t make as much money per pound of product sold. So, you have to watch your budget and not spend too much, or you’re never going to make a profit.

The self-sustaining artisanal well and water rights were existing on the property. There’s no pumping required for it and the water goes into a 10,000-gallon holding tank, where we can monitor and test for water quality. In order to water our plants, we use a pump/drip water system that supplies water to each individual plant. It’s very efficient compared to most watering systems out there, such as flood irrigation or pivots, and really doesn’t use a heck of a lot of water.

Green: Are you growing in open air or greenhouses?

Craig: We grow in two 3,000 square feet industrial-grade greenhouses at Boot Ranch Farms. Greenhouse One has all the bells and whistles including heating, cooling, light deprivation, supplemental lighting, automated controls and more. That greenhouse allows us to mimic Mother Nature a little bit. We can get up to six harvests throughout the course of the year in that greenhouse. However, in reality, we get about four.

In addition, we have a second greenhouse that is set about 100 feet away and set up to keep plants growing on mother nature’s cycle. We can move groups of mature plants to Greenhouse One after each harvest for multiple flowering cycles. Lastly, between greenhouses, we have a 10,000 square foot courtyard that’s protected with shade cloth and other things to help protect those plants from the elements. In late October, all remaining plants in both greenhouses and the courtyard become mature and ready to harvest due to shorter days created by mother nature.

Green: Do you insure your crops?

Craig: We have not. Hemp is a new industry and we have not found good crop insurance.

Green: Do you cultivate your own genetics?

Craig: We work with some other companies here in Colorado to provide genetics. Consistent genetics are extremely important on the hemp side because we need to trust that they are going to keep the THC levels down. On the marijuana side, that part doesn’t matter so much

There are different strains that have been created that I absolutely love, and I’ve tried to stick with them and stay with that seed stock. One of them is called The Wife and the other Cherry Wine. Most of the best hemp I have found is based upon the Cherry strain. People are always looking for high CBD. I’d rather have a lower CBD level in the 8% to 12% range. Something higher in the 14% to 20% range has a higher chance of producing a product with more than the legal amount of THC.

Green: Is Harvey’s All Naturals fully supplied by Boot Ranch Farms?

Craig: Yes, it is. There are a lot of things that go into a quality product and we focus on that at Boot Ranch. We’re small, not trying to compete with the large-scale market. Unfortunately, a high percentage of the products out on the market come from large-scale industrial hemp grows. We focus on long-term medicinal value and grow very high-quality hemp and we try not to degrade it in any way, shape or form throughout processing.

Green: How many square feet or acres is the Boot Ranch Farm?

Craig: Boot Ranch farm is about 260 acres. We only grow on less than three of it.

Green: What’s your extraction process?

Craig: We use cold alcohol extraction. We do not distill to separate our alcohol from the hemp oil. We use what’s called a roto vape. That cold processing preserves our terpenes, it preserves our full-spectrum cannabis oil profile and doesn’t fully decarboxylate our CBDa. We want a large CBDa percentage because there are many things that CBDa is good for when it comes to long term medicinal reasons.

Green: Are you processing your own hemp?

Craig: No, we sub that part of it out. What I’ve learned in this industry is three main parts: 1- the farming; 2- the extraction, and; 3- the product line. Those are three very separate processes and require specialized expertise within themselves. Each is a large investment and it’s very hard to do it all. I decided to work with other people on the extraction part of it. They have the expertise, and we pay them well to do what they do.

Green: Okay, great. And then any final words for Ag Day?

Craig: Support your small farmer in nutrient-rich agricultural products.

Green: Great. That concludes the interview, Harvey!

Craig: Thank you very much!

Molson Coors Joint Venture Selects Quicksilver Scientific as Technology Partner

By Cannabis Industry Journal Staff
No Comments

According to a press release published this week, Quicksilver Scientific, a nanoemulsion delivery technology company, announced a partnership with Truss CBD USA, which is the joint venture between Molson Coors and HEXO Cannabis.

Quicksilver is a manufacturer of nutritional supplements that uses a patent-pending nanoemulsion delivery technology. Their technology is what enables companies to produce cannabinoid-infused beverages.

Because cannabinoids like CBD are hydrophobic, meaning they are not water-soluble, companies have to use nanoemulsion technology to infuse beverages. Without this technology, beverages with cannabinoids would have inconsistent levels of compounds and they wouldn’t work well to actually deliver the cannabinoids to the body. Nanoemulsion essentially cannabinoids water soluble, thus allowing the delivery of cannabinoids to the bloodstream, increasing bioavailability.

Dr. Christopher Shade, Ph.D., founder & CEO of Quicksilver Scientific says they have perfected their nanoemulsion technology over the past decade. “CBD is not water-soluble, which creates challenges for manufacturers when attempting to mix it into beverages,” says Dr. Shade. “Our innovative nanoemulsion technology overcomes these challenges by encapsulating nano-sized CBD particles in water-soluble spheres that can be directly added to beverages. The result is a clear, great-tasting product with greater bioavailability, a measure of a compound’s concentration that is absorbed into the body’s bloodstream.”

The Veryvell beverage product line

Quicksilver is providing their technology to be used with Veryvell, the joint venture’s new line of non-alcoholic, hemp-derived CBD beverages. The beverage line is already available in the Colorado market. According to the press release, the three product offerings include: “Focus” (grapefruit and tarragon with ginseng and guarana), “Mind & Body” (strawberry and hibiscus with ashwagandha and elderberry) and “Unwind” (blueberry and lavender flavors with ashwagandha and L-Theanine).

Leaders in Infused Products Manufacturing: Part 4

By Aaron Green
No Comments

Cannabis infused products manufacturing is quickly becoming a massive new market. With companies producing everything from gummies to lotions, there is a lot of room for growth as consumer data is showing a larger shift away from smokable products to ingestible or infused products.

This is the fourth article in a series where we interview leaders in the national infused products market. In this third piece, we talk with Stephanie Gorecki, vice president of product development at Cresco Labs. Stephanie started with Cresco in 2019 after transitioning from an award-winning career in traditional foods CPG. She now heads up product development where she manages R&D for Cresco, a multi-state operation with tremendous SKU variety.

Next week, we’ll sit down with Lisa McClung and Glenn Armstrong from Coda Signature. Stay tuned for more!

Aaron Green: Stephanie, how did you get involved at Cresco Labs?

Stephanie Gorecki: A few years ago, CBD became the most talked about ingredient in the food industry. CBD-infused food headlines appeared in most of the trade magazines. I have always been curious about working in the cannabis space, and not just with CBD, but THC and other cannabinoids. I researched technical seminars and came across the cannabis infused edibles short course put on by the Institute of Food Technologists.

Stephanie Gorecki, Vice President of Product Development at Cresco Labs

I attended the short course in April of 2019. I realized that to be hands-on with cannabis in the near future, I would need to join an organization that was already in the space. The space was highly regulated which meant that research in the mainstream food and beverage space was limited.

Immediately following that seminar, I began to look for opportunities near where I lived. That’s when I came across the Cresco Labs career opportunity. The Director of Food Science position appeared to be a good match. I applied for the position and went through the interview process. Approximately two months after attending that seminar, I joined Cresco Labs.

Aaron: Awesome! It’s a cool story. In your role, how do you think about developing products that differentiate in the market?

Stephanie: There are many opportunities for brand differentiation in cannabis right now. There is a focus on high bioavailability and water solubility and how that translates to onset times once consumed. Many of these technologies utilize ingredient technologies and systems that I have experience with from my past work in the flavor industry.

Gummies and jellies are a great infusion matrix to start with because of their shelf-life stability. There are a variety of formulation techniques that can be used to deliver on product differentiations. There is an abundance of flavor varieties, colors, processing steps and cannabinoid ratios that can be baked into a formula to make that product line unique.

Here in the cannabis space, SKU variety is essential. It’s exciting to be a part of a company where we develop products that appeal to a variety of customer wants and needs.

Aaron: In that vein, what’s your process then for creating a new product?

Stephanie: I’ll start with how we develop an edible. Most of my background is in this type of product development, but the same process is applied to how we develop and extract vape, topical, flower SKU, or ready-to-smoke type products. We follow a similar stage/gate process utilized by most CPG companies.

Marketing typically presents our product development team with a brief on a new concept based on how they’ve read the needs of the market. There are opportunities for us to come to marketing with ideas for innovation, too. The product development team regularly works in our processing facility, so we as a team are aware of the different capabilities of each state and production line. During the briefing phase, we determine what is needed to be achieved and the parameters that the team would like the new product to deliver on.

For edibles, we begin our development work at The Hatchery. The Hatchery is our non-infused product development space that we utilize outside of our processing facility. In this space, we have several pieces of pilot equipment that allow us to scale and create prototypes that are highly representative of what our finished product will look like. For vapes, flower SKUs and RTS (ready-to-smoke) products, development and processing trials happen within our cultivation center.

All infusions are conducted in our licensed processing center. We also conduct stability testing and analytical testing in-house on our products. Our analytical lab is amazing – we have talented chemists and the ability to run GCMS, HPLC, microbiological testing, and many other analytical tests that are important for ensuring consistency and product uniformity.

Aaron: Can you expand on a point about testing? How do you think about testing at the different points in your manufacturing or production process?

Stephanie: Testing comes in several forms. We focus heavily on analytical testing since that does not involve product consumption. Potency uniformity and consistency is critical for edibles. For infused products, we have one shot at hitting our potency – infusion science is extremely important for us. Our gummies and chocolates cannot be re-worked, so hitting our potency range on the first attempt is important. If we miss the target, the product has to be destroyed.

We have methods developed to conduct in-process potency testing where we can. With the processes and infusion methods that we have implemented, we are rarely outside of our targeted potency ranges.

Aaron: Okay, awesome, then, can you walk me through your experience with one of your most recent product launches?

Stephanie: We recently launched Mindy’s Dark Chocolate Peppermint Bark, a limited time offering for our Mindy’s chocolate line. There’s a series of commercialization trials that we will conduct prior to launch. We use these trials as an opportunity to train our production teams on the new manufacturing instructions and processes.

When it comes to launching products, our technical teams are very hands on with new product introductions. Since we cannot manufacture product in one state and ship it to another state, we have to build processing centers and secure the proper licenses in every state that we’d like to operate in. When we have a new product ready to launch in a new state, our team works with Operations on the tech transfer piece. We’re there on-site during launches to oversee and train on the entire process until our teams are comfortable with manufacturing and packaging the new SKUs.

We monitor launches carefully to ensure product looks as it should before and after leaving our facility for sale in licensed dispensaries across the state. When there are opportunities to optimize a process post-launch, we will do what we can to make the process work as well as possible for the teams producing our products.

Aaron: Okay, so next question is, how do you go about sourcing ingredients for your infused products?

Stephanie: We manufacture our oils and extracts in house, and then source other ingredients externally. We have a supplier quality assurance process for new supplier approval, and we have documentation needs that we need each supplier to be able to deliver on.

Several of our suppliers have invested in research and development of products that will help us to meet our deliverables in the cannabis industry. Our suppliers, at times, have provided applications support in order to help with our speed to market and early phase prototyping. These types of partnerships are essential to us being able to make quick modifications and decisions on ingredients such as flavors and colors.

Aaron: Can you give me an example of a challenge that you run into frequently? This could be a business challenge or a cannabis-related challenge.

 “I’m a scientist at heart. I look forward to more spending on cannabis research to show how THC and other cannabinoids can be used to treat a variety of conditions.”Stephanie: A big challenge for us and other multi-state cannabis operators are the variations in compliance regulations state-to-state. We have compliance managers in every state who work to ensure we are meeting all of the state regulations. Our packaging reviews are in-depth because of all the language that needs to be included on our packaging.

Each state needs its own packaging with proper compliance labeling. Some states require a cannabis warning symbol of a certain type. If we sell Mindy’s Gummies in 8 flavors and THC mg SKUs in four states, that is 32 different pieces of artwork that need to be managed and cross-checked for accuracy. We have 32 separate pieces of packaging for this one line of products. We have many lines of products with multiples strains (flower and vapes) and flavors (edibles).

Aaron: You mentioned packaging, do you do all of your packaging in house?

Stephanie: We design our packaging artwork in-house. We have a creative team who works on our product artwork, and then a team of cross-functional members tasked with packaging editing and review. Packaging reviews go through multiple rounds before being released for printing. We source a variety of packaging depending on the needs of the product going into the packaging. For edibles, our packaging has to be opaque. Product cannot be seen through the packaging in most states. This is great for our products that are made with natural colors that may be light sensitive.

All of our packaging needs to be child resistant. This limits the amount of packaging variety that we have, but this is a big opportunity for packaging developers. We want and need more sustainable forms of packaging that are differentiated from other packaging forms currently on the market.

Aaron: What trends are you following in the industry personally?

Stephanie: Cannabis trends that are of interest to me personally are fast-onset and water solubility technology. There have also been many discussions surrounding minor cannabinoids and how those can be blended together to drive customer experience.

There are traditional food trends that also impact how we formulate. Our Mindy’s Edibles line is flavor forward. The flavors are sophisticated. In the Mindy’s line, you won’t find a generic orange or grape flavor. Instead, you’ll find a Lush Black Cherry or Cool Key Lime Kiwi Flavor. This flavor development work starts with Mindy Segal, who is the face and talented James Beard award-winning chef behind our Mindy’s Edibles line of products.

Aaron: Okay, so the last question I have for you is, what are you interested in learning more about?

Stephanie: I’m a scientist at heart. I look forward to more spending on cannabis research to show how THC and other cannabinoids can be used to treat a variety of conditions. People use cannabis for many reasons: to relax, to ease aches or pains, etc. It’s exciting to lead part of our technical team during a period of time where cannabis is rapidly growing and is of great interest and increasing acceptance across our country and in the world.

Aaron: Okay. So that’s it. That’s the end of the interview!