Tag Archives: risk

April 8, 2020

Following Up: Questions From The Infused Products Virtual Conference Answered

By Ellice Ogle

If you missed the Cannabis Industry Journal’s 3rd Annual Infused Products Virtual Conference last week, one of the speakers, Ellice Ogle, founder and CEO of Tandem Food presented on Food Safety Culture in the Cannabis Industry. An overview of the information in the presentation can be found here, Concentrate On a Food Safety Culture In Your Workplace. Below are answers to some of the post-presentation questions we received, but were unable to answer during the Q&A session. To get your additional questions answered or for a complimentary consultation for your company, specially provided to readers of Cannabis Industry Journal, contact Ellice Ogle at Ellice@tndmfood.com.

Question: What are some recommended digital programs for internal auditing?

Ellice Ogle: Before looking at the tools for conducting an internal audit, understand the goal of the internal audit. One key aspect of internal auditing is knowing which standard(s) to audit against. For example, regulatory audits for cGMP certification are different than optional third-party certifications such as any GFSI scheme (SQF, BRC, PrimusGFS, etc). While the standards ultimately have the same goal of food safety with varying focuses, it is important to have an experienced food safety specialist conduct the audit as realistically as possible. The experienced specialist will then be able to recommend an appropriate tool for internal auditing moving forward, whether it is software such as FoodLogiQ, SafetyChain, Safefood 360°, among many others, or simply providing a template of the audit checklist. Overall, the risk of foodborne illnesses can be minimal, but it takes persistence and commitment to achieve a successful food safety culture. Metrics can assist in assessing the commitment to food safety and, as a result of these efforts, you will minimize the risk of compromising the health and safety of your guests, employees, foods and business. If you want a specific example, I’d like to direct you to a case study in partnership with Heylo LLC in Washington state, posted on the Tandem Food website.

Q: What are examples of ways to share environmental monitoring results to enhance a good edible safety culture?

Ellice: In the Control of Listeria monocytogenes in Ready-To-Eat Foods: Guidance for Industry Draft Guidance (2017), the FDA states that “a well-designed environmental monitoring program promotes knowledge and awareness of the environmental conditions that could result in product contamination and is a more effective program than product testing alone.” In other words, environmental monitoring programs and results can identify environmental conditions within a facility that could cause potential contamination. Publishing these findings, for example in the form of a case study or sharing the details of the practice, can enhance the food safety culture in the specific niche industry. For example, to borrow from the meat industry, Tyson Foods, Inc developed and shared environmental monitoring programs that are used by their peers, promoting a unified food safety culture, rather than competitive, guarded secrecy.

Q: Are the food safety requirements the same for retail and manufacturing?

Ellice: The food safety requirements are not exactly the same for retailers and manufacturers. The difference is inherent that retailers are working with finished product while manufacturers are working with raw ingredients and the manufacturing process to develop the finished product. Let’s take a closer look at cannabis regulation in Washington state. Chapter 314-55-104(12) states “Processors creating marijuana extracts must develop standard operating procedures (SOPs), good manufacturing practices (GMPs), and a training plan prior to producing extracts for the marketplace.” Compare this to the requirements for retailers, 314-55-105(11) which states “A marijuana producer, processor or retailer licensed by the WSLCB must conduct the production, processing, storage, and sale of marijuana-infused products using sanitary practices.” While SOPs and GMPs are not explicitly mentioned for retailers as they are for manufacturers, sanitary practices could be documented as Sanitation Standard Operating Procedures (SSOPs). Proper storage practices can also be an overlapping food safety concern with respect to temperature control or pest management systems. Overall, food safety should remain a top priority in maintaining the integrity of the products throughout the supply chain.

Q: To your knowledge, has there been a food safety outbreak associated with a cannabis-based product?

Ellice: One possible cannabis-related death investigated in 2017 uncovered deadly pathogens in medical cannabis. However, to my knowledge, I have not seen a food safety outbreak associated with a cannabis-based product. There might be any number of reasons that this is so, for example, possibly because a food safety outbreak associated with a cannabis-based product might not have had a large impact to make headlines. Although, with the cannabis industry already misunderstood and a stigma so prevalent to even promote fake news, it is better to prevent an outbreak from ever occurring. One thing to note is that ultimately cannabis is just another ingredient in existing products, of course with special properties. So, the common food safety offenders are present: listeria, Salmonella, E. Coli, among others. On the plant, cannabis food product manufacturers must minimize the risk of mycotoxins produced by molds, pest contamination, and pesticide contamination. For products that contain cannabis infusions or extractions as an ingredient, there is the possibility of the growth of Botulism toxin. Many of these pathogens can be minimized by appropriate heat treatment or maintenance of refrigeration, testing, and by practicing preventive measures. Arguably, the largest potential for pathogenic contamination is due to improper employee handling. To refer to what we discussed earlier, employee training is key, as well as proper enforcement. Having a strong food safety culture ensures that people have the knowledge of food safety risks and the knowledge of preventing outbreaks.

Q: Do any of the panelists know of any efforts to develop a food safety-oriented standard for the cannabis industry?

Ellice: One example of a specific effort to develop a food safety-oriented standard for the cannabis industry includes TraceTrust A True Dose™ & hGMP™ certification. However, there are efforts for other standards that have food safety included. Take organic certification, there are several companies creating and auditing against their own standard such as Clean Green Certified, Oregon Sungrown Farm Certification, or Washington Sungrowers Industry Association. The California Department of Food and Agriculture (CDFA) is also preparing a cannabis program comparable to the USA National Organic Program.

Q: Can you assist with cGMP certification?

Ellice: Yes, Tandem Food LLC is positioned to consult on cGMP certification for manufacturing facilities in the cannabis industry. First, a gap assessment can be conducted to obtain useful actionable data for you, rather than be an intimidating experience. Working from the identified baseline, Tandem Food will work with you to create and implement all related documentation and programs, providing training as necessary. Overall, with the right commitment, cGMP certification can take 6-12 months.

March 31, 2020

The Beginner’s Guide to Integrated Pest Management

By David Perkins

2 Comments

Formulating a Plan

In this article you will learn how to control pests and improve the health of your cannabis plants using integrated pest management, commonly referred to as IPM. This involves a multi-point strategy – there is no quick fix, nor is there one solution that will wipe out all your pest problems. Proper pest management requires patience, consistency and determination.

It is important to understand that not all pesticides are bad. While many are incredibly harmful not only to pests, but also humans, in this article I will educate you about some of the safer alternatives to traditional pesticides. It is possible to safely control unwanted pests in your cannabis garden without harming yourself, your employees or the natural habitat around you.

Every cultivation facility should have a well-thought-out plan for their pest management program. This program should account for the prevention, and if necessary, eradication of: spider mites, russet mites, fungus gnats, root aphids, thrips and caterpillars. These are just a few of the more common pests you’ll find in a cannabis garden. There could also be many other less commonly known bugs, so you have to be vigilant in looking closely at your plants, and the soil, at all times. Complete eradication of a targeted pest can be difficult. Once a pest has established itself, decimating or decreasing the population will require an aggressive regimen that includes spraying daily to control populations and prevent other pests from getting established.

Spraying or applying pesticides to the foliage of plants isn’t the only way to control or eradicate pest populations. There are many other ways that you can minimize the spread of pests without the use of pesticides. In greenhouse and outdoor grows, growing specific types of plants around the cultivation area will attract both beneficial and predator bugs that will naturally control pest populations. Some plants that attract these bugs are: mint, peppers, and marigold. Beneficial and predator bugs, such as ladybugs, predator wasps and predator mites, can control unwanted pest populations in the area before they even have a chance to become a problem in your garden. Plants and flowers that attract bees, birds and insects will also create helpful bio- diversity, making it more difficult for the unwanted pests to thrive.

For indoor cultivation, it is imperative that you have your cultivation facility set up for a proper workflow. If you already have pests, you need to make sure you are not contaminating the rest of your facility when going from one area to the next. Make sure that you only go to contaminated areas at the very end of your day, and when you’re done working in that area, you must immediately exit the building. Do not ever walk back through the uncontaminated parts of your facility or the pests will spread quickly.

When most people think of pests in their cannabis garden they think of the more common varieties: spider mites, russet mites, aphids and thrips. However, there are also soil-dwelling pests that can exist, without your knowledge. These will decrease the health and vigor of your plants, without you even knowing they’re there, if you’re not careful to check for them. Some of the soil dwelling pests that plague cannabis plants are: root aphids, fungus gnat larvae and grubs. It is just as important to control the pests below the soil, feeding on your roots, as it is to control the pests that feed above soil on your plants.

Maintaining healthy plants is essential to controlling pest populations, both on the foliage and below the soil. Healthy plants will have an easier time fighting off pests than unhealthy plants. Plants have immune systems just like humans, and the stronger the plant’s immune system, the more likely it will be able to ward off pests and diseases. Allowing a plant to reach its full potential, by minimizing pests, means your plants will also have a better quality, smell and flavor, not to mention a bigger yield.

Worker Safety, Regulation and REI times

The application of pesticides requires certification from the state agricultural department. In certain situations, depending on the type of pesticide and method of application, a license may even be required. The application of pesticides without proper certification is against the law. Applying pesticides in a manner that is not in accordance with the label and instructions is also a violation of law.

The proper personal protective equipment (PPE) is required for anybody handling, mixing or applying pesticides. Employees can be a liability to your company if they are applying pesticides improperly. Make sure you and your entire staff are well educated about pesticide use requirements and limitations, prior to usage, and that only a properly certified person is handling the mixing and application at your facility.

The author, David Perkins, In his greenhouse after using insect killing soap.

After a pesticide is applied, you must abide by the re-entry interval (REI). This is the required time period limiting all workers from re-entry into areas where pesticides have been applied. This time period will vary depending on the type of pesticide used and the method of application. In some instances, pesticides applied in the last 30 days may require employee training before work can be done in those areas.

The misuse of or improper handling of pesticides is not only unlawful and dangerous to human health, but can also cause environmental damage to waterways and wildlife. The direct effects of pesticides on wildlife include acute poisoning, immunotoxicity, endocrine disruption, reproductive failure, altered morphology and growth rates and changes in behavior. Pesticides can indirectly impact wildlife through reduction of food resources and refuses, starvation due to decreased prey availability, hypothermia and secondary poisoning. Section 1602 of the California Fish and Game Code governs requirements for permitting of any project where pesticides will be used, and strictly regulates the disposal of all waste and run-off. It is imperative to know the regulations and to abide by them, or heavy fines will ensue!

Using Pesticides in a Regulated Market

Knowing which pesticides you can’t use, to avoid failing mandatory state testing, is just as important as knowing which ones you can use safely to pass required testing. Most states with regulated markets have strict limitations on the pesticides that can be used in cannabis cultivation. Pesticide use in the cultivation of cannabis is the most strictly regulated in the agriculture industry; the pesticides allowed for use in cannabis cultivation are far more limited than any other crop.

Just because a product is certified organic does not mean that it can be used, or that it is safe to be consumed or ingested. Oftentimes when cannabis flower alone is tested it will not fail or show a detectable amount of pesticides or heavy metals. However, when that flower is turned into concentrates, banned substances are then detected in testing, leading to test failures.

Cannabis cultivation facilities that are located on land that was previously used for conventional agriculture, or located near vineyards or other agricultural crops that are heavily sprayed with harmful pesticides, run a very high-risk failing testing. This is because of either spray drift from nearby agriculture, or residual pesticides and heavy metals left in the soil from previous crops that were using pesticides banned for cannabis cultivation. Accordingly, if you’re going to be growing outdoors or in a greenhouse, it is imperative that you get a soil and water test prior to cultivation, so you can determine if there is any potential for test failures due to pesticides or heavy metals in the soil or water in that area.

Proper Application – Using the Right Tools in the Right Way at the Right Time

One of the most important factors in pest management is proper identification of pests and proper application and coverage of pesticides. It does not require an entomology degree to identify insects, these days there is a lot of information online that can help you identify cannabis pests. Proper identification of insects can make the difference between success and failure. With a good eye and a microscope, if you do your research, you can control most insects in your garden.

In order to control pests in your garden you must get proper coverage of the foliage of the plant when you are applying pesticides. There are different types of equipment that are commonly used to apply pesticides in cannabis cultivation: backpack sprayers, foggers, and airless paint sprayers are the most common. An alternative method involves using an automated dosing system such as a dosatron, which injects fertilizer or pesticides at a specific ratio into your water lines, allowing you to use only the exact amount of pesticide you need. That way you avoid wasting money on unused pesticides. It is also safer for employees because it minimizes employee exposure, since there is no mixing required, and it allows for a large volume to be sprayed, without refilling a tank or a backpack sprayer.

No matter what you are using you must ensure you get the proper coverage on your plants in order to control pests. The temperature and humidity of your cultivation area, as well as the PH and temperature of the pesticide solution, all factor into the success of your IPM. For example, PFR 97 needs to be applied at a higher humidity range, around 70% to be most effective. In some areas this is not possible so repeated applications may be required to ensure the application is effective. A high PH or alkaline PH can cause alkaline hydrolysis which will make your pesticide solution less effective and will dictate how long your pesticides remain effective after they are mixed. It is therefore important to use your pesticide solution as soon as you make it; don’t let it sit around for long periods of time before use or it will be less effective.

In cannabis cultivation there are two different primary growth cycles: vegetative and flower. These cycles require different IPM strategies. In general, during the flowering cycle, pesticides should not be applied after the second week, with some limited exceptions i.e. for outdoor cultivation there is a longer window to spray since the flower set takes longer than a plant being grown inside, or in a light deprivation greenhouse, where there is a 12/12 flowering cycle.

Starting with an immaculate vegetation room is crucial to maintaining pest and mold free plants in the flowering cycle.

For the vegetative (non-flowering) cycle, a strict rotation of foliage spray applications targeting not only pests, but also molds and pathogens, will be necessary to avoid a quick onset of infestation. Starting with an immaculate vegetation room is crucial to maintaining pest and mold free plants in the flowering cycle. Preventative sprays that are safe for use include: safer soap (contact kill) for soft bodied chewing insects; Regalia (biological control) for powdery mildew; and PFR 97 (biological control) for soft bodied chewing insects. It is also helpful to spray kelp, which strengthens the cell walls of plants, making the plant healthier, and thus enabling the plant to better defend itself from pests and diseases. Also, Bacillus thuringiensis (Bt) is useful to prevent or kill caterpillars.

The best way to control a pest infestation in the flowering cycle is at the very beginning on day one. You must start aggressively, with a three-way control consisting of a contact kill and preventative during days 1-14; preventative and biological control during days 10-18; and then release predator bugs on day 25, for optimal results. Knocking back the population with an effective contact kill pesticide early on is essential to ultimately lowering populations throughout the grow cycle, so that you can spray a biological control to preclude them from returning, before you release the predatory bugs at the end of the cycle.

Biological controls can take anywhere from 3 to 10 days before they are effective. Biological pesticides are selected strains of bacteria or fungus. When the plant tissue is eaten by a targeted pest, the bacteria kills the pest from the inside providing control without having to spray pesticides repeatedly. Predator bugs are the last line of defense, used in late flowering. They can be used indoors, outdoors and in greenhouses. An example of a common predator bug is Amblyseius californicus used to control low populations of spider mites, but there are many different varieties and they are specific depending on the type of pest population you seek to control.

A common concern with the use of predatory bugs, is whether they will be present when the flowers are harvested. However, if there is no food for the bugs (i.e. pests) the predator bugs will leave in search of food elsewhere. Further, indoor predator bugs are usually very small in size and difficult to see to an untrained eye. It is very unlikely to see any signs of predator bugs near the end of the flowering cycle, or in the finished flower product. Even when using bigger predator bugs, the bugs will leave the plants when harvested and dried.

Having pests can be very stressful. It is not uncommon to have bugs, pests, rodents, animals and birds cause damage in cannabis gardens. Making an informed decision based on science and not on unproven assumptions can determine how successful you are at pest management. There are many factors that go into pest management and no one situation is the same. You must be dedicated and consistent; pest management never stops. You will always have something ready to invade your garden. Prepare, plan, prevent and repeat!

March 11, 2020

FDA Issues Update on CBD: Still Working, Still Waiting

By Aaron G. Biros

No Comments

On March 5, 2020, the U.S. Food and Drug Administration (FDA) issued a press release to the public about their work on devising a regulatory framework for cannabidiol (CBD) products. The FDA also submitted a report to Congress on their rulemaking progress.

The main theme of the report is the same story we’ve been hearing from the FDA for a while now: They are still working on figuring out how to regulate CBD products and wants to do more research before they tackle the rulemaking.

The most intriguing new development from this report is the FDA’s newfound interest in regulating CBD products like dietary supplements:

“FDA is actively considering potential pathways for certain CBD products to be marketed as dietary supplements. Under current law, CBD products cannot lawfully be marketed as dietary supplements, but FDA has the authority to create an exemption through notice-and-comment rulemaking that would allow products containing CBD to be sold legally as dietary supplements.”

If you’ve been living under a rock for the past couple years, here’s a recap: In June of 2018, the FDA approved GW Pharma’s drug, Epidiolex, for the treatment of rare forms of epilepsy. This allowed a drug containing CBD to go to market, but only through the agency’s drug approval process. When the 2018 Farm Bill (Agricultural Improvement Act of 2018) was signed into law in December later that year, the federal government removed cannabis (hemp) with less than 0.3% THC from the Controlled Substances Act, essentially legalizing it on a federal level. Congress tasked the FDA with figuring out how to regulate the market. Without any FDA guidance in the early days, the subsequent market growth created mass confusion for the industry and consumers alike, with no one really knowing if selling CBD products is legal or not. In May of 2019, the agency held a comment period and public hearing on CBD, which included a lot of discussion around the benefits, the risks and further research on CBD. Throughout 2019, the FDA sent a large number of warning letters to companies marketing CBD products with unsubstantiated health claims. Towards the end of 2019, Congress passed a bill mandating that the FDA update them on their progress to regulate the market within 60 days. That deadline came and went, and then the FDA issued the public update and submitted the report mentioned above to Congress last week.

The FDA says they intend to take a number of steps towards providing some market clarity, while still protecting the public from unknown risks. Firstly, they want to educate the public more about potential risks associated with CBD. “We remain focused on educating the public about the number of questions that remain regarding CBD’s safety,” reads the update. “There may be risks that need to be considered before using CBD products outside of the monitored setting of a prescription from your health care provider.” Those concerns mentioned above include potential liver injury, drug interactions, reproductive toxicity and more benign side effects like drowsiness.

The agency also wants to try and close knowledge gaps in the areas of safety and potential benefits. In this section of the update, the agency asks industry stakeholders for help. “We’re seeking reliable and high-quality data.” The agency is requesting data on sedative effects, impacts of long-term use, pharmacokinetics, safety of various drug delivery mechanisms, safety for animals, different processes for full or broad spectrum or isolate derivation, among other areas of interest. They plan to re-open the public docket from the public hearing back in May 2019, extending the comment period indefinitely as a tool for stakeholders to share information with the FDA.

As far as enforcement actions go, the agency wants to take a risk-based approach to it. While there is still no official enforcement policy, the FDA is working on it. Their biggest concern is with companies marketing CBD products using drug and health claims, which could “deter consumers from seeking proven, safe medical therapies for serious illnesses – potentially endangering their health or life.” The agency is also worried about potential contamination risk and consumer exposure to things like residual solvents and heavy metals. Their last concern in this area involves truth in labeling, like making false label claims, not listing every ingredient or incorrectly stating the amount of cannabinoids in the product.

“Our ongoing efforts related to CBD, including the steps we’re announcing today, are in line with our mission to protect the public, foster innovation and promote consumer confidence. We recognize the significant public interest in CBD and we must work together with stakeholders and industry to develop high-quality data to close the substantial knowledge gaps about the science, safety and quality of many of these products. We are committed to working efficiently to further clarify our regulatory approach to these products – as always, using science as our guide and upholding our rigorous public health standards.”

Overall, the public update and the report don’t disclose anything groundbreaking. They do, however, provide some much-needed guidance for the CBD market on how stakeholders can help the FDA’s efforts. The fact that they are investigating dietary supplements as a path toward a regulatory framework is the by far the biggest take away from all this.

February 18, 2020

USDA Announces Risk Management Programs for Hemp

By Aaron G. Biros

2 Comments

According to a press release published earlier this month, the U.S. Department of Agriculture (USDA) announced two new programs available for hemp growers to mitigate their risk.

The first is called Multi-Peril Crop Insurance (MPCI), which is a pilot hemp insurance program designed to cover against “loss of yield because of insurable causes of loss for hemp grown for fiber, grain or Cannabidiol (CBD) oil.” The second plan is Noninsured Crop Disaster Assistance Program, which protects against losses from lower-than-normal yields, destroyed crops or “prevented planting” where permanent crop insurance is not available.

Both of the programs are now accepting applications and the deadline to apply is March 16, 2020. “We are pleased to offer these coverages to hemp producers. Hemp offers new economic opportunities for our farmers, and they are anxious for a way to protect their product in the event of a natural disaster,” says Bill Northey, Farm Production and Conservation Undersecretary.

The MCPI program is available for hemp producers in 21 states, according to the press release. Th program is available in certain counties in Alabama, California, Colorado, Illinois, Indiana, Kansas, Kentucky, Maine, Michigan, Minnesota, Montana, New Mexico, New York, North Carolina, North Dakota, Oklahoma, Oregon, Pennsylvania, Tennessee, Virginia and Wisconsin.

There are a handful of requirements to be eligible for that program, such as having one year of growing under their belt and have contracts in place for the sale of their crops. Hemp growers producing CBD must have at least 5 acres and hemp growers producing fiber must have at least 20 acres cultivated.

In 2021, the press release states, “hemp will be insurable under the Nursery crop insurance program and the Nursery Value Select pilot crop insurance program.” With those programs, hemp crops can be insured if grown in containers and in accordance with federal law.

To apply for any of these programs, hemp growers must have a license and must be totally compliant with state, tribal or federal regulations, or be operating under a state or university research plot from the 2014 Farm Bill. Growers need to report their hemp acreage to the Farm Service Agency, a division of the USDA.

The press release also mentions that if the crops have above 0.3% THC, the crop becomes uninsurable and ineligible for any of the programs.

December 2, 2019

FDA Issues Warnings to 15 CBD Companies, Updates Safety Concerns

By Aaron G. Biros

1 Comment

On November 25^th, the U.S. Food and Drug Administration (FDA) sent out warning letters to 15 different companies for “illegally selling products containing cannabidiol (CBD) in ways that violate the Federal Food, Drug, and Cosmetic Act (FD&C Act).” They also published a “Consumer Update” where they express concern regarding the general safety of CBD products. The press release also states that at this time the FDA cannot say that the CBD is generally recognized as safe (GRAS). To see the list of companies that received warning letters, check out the press release here.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

While the FDA is still trying to figure out how to regulate hemp and hemp-derived CBD products, they published these releases to let the public know they are working on it, according to FDA Principal Deputy Commissioner Amy Abernethy, M.D., Ph.D.:

“As we work quickly to further clarify our regulatory approach for products containing cannabis and cannabis-derived compounds like CBD, we’ll continue to monitor the marketplace and take action as needed against companies that violate the law in ways that raise a variety of public health concerns. In line with our mission to protect the public, foster innovation, and promote consumer confidence, this overarching approach regarding CBD is the same as the FDA would take for any other substance that we regulate. We remain concerned that some people wrongly think that the myriad of CBD products on the market, many of which are illegal, have been evaluated by the FDA and determined to be safe, or that trying CBD ‘can’t hurt.’ Aside from one prescription drug approved to treat two pediatric epilepsy disorders, these products have not been approved by the FDA and we want to be clear that a number of questions remain regarding CBD’s safety – including reports of products containing contaminants, such as pesticides and heavy metals – and there are real risks that need to be considered. We recognize the significant public interest in CBD and we must work together with stakeholders and industry to fill in the knowledge gaps about the science, safety and quality of many of these products.”

The Warning Letters

The warning letters sent to those 15 companies all mention a few types of violations to the FD&C Act. Those include marketing unapproved human and animal drugs, selling CBD products as dietary supplements and adding CBD as an ingredient to human and animal foods. All 15 companies are using websites, online retailers and social media in interstate commerce to market CBD products unlawfully, according to the press release.

This is not the first time the FDA has sent out warning letters to CBD companies. Previously, most of the warning letters were sent out regarding companies making unsubstantiated drug and health claims. This new round of 15 warning letters reaches beyond just unsubstantiated claims and identifies a few new areas of regulatory oversight that CBD companies should be wary of.

Of the 15 warning letters sent out, some were sent to companies that are marketing CBD products to children and infants, some were sent to companies using CBD as an ingredient in food products, some were marketed as dietary supplements and one company marketed their products for use in food-producing animals, such as chickens and cows. With this press release, the FDA is saying loud and clear that the above list of marketing strategies are currently unlawful, that is, until they finish their work in devising a regulatory framework for hemp-derived CBD products.

Updated Safety Concerns

Regarding the FDA saying they cannot deem CBD as generally recognized as safe (GRAS), they published a fact sheet titled “What You Need to Know (And What We’re Working to Find Out) About Products Containing Cannabis or Cannabis-derived Compounds, Including CBD.” The key words there should be noted in the parentheses: And What We’re Working to Find Out. The FDA’s research is by no means over with and, if anything, has only just begun. Refer to the fact sheet to see why the FDA couldn’t say that CBD is GRAS.

In the FDA’s research, they have found a few potential health problems associated with taking CBD. During the marketing application for Epidiolex as a new drug, the only approved CBD drug on the market, the FDA identified a couple of safety risks. The first one is liver injury, which they identified in blood tests, but mentioned that it could be managed easily with medical supervision. Without medical supervision, potential liver injury due to CBD consumption could go undetected, according to the FDA.

The second health concern is drug interaction. During the new drug approval process for Epidiolex, they found that other medicines could impact the dose of CBD and vice versa. The other major health concern they have is male reproductive toxicity. The FDA says that studies in lab animals showed male reproductive toxicity, including things like decrease in testicular size, inhibition of sperm growth and development and decreased circulating testosterone. They do mention, however, that “it is not yet clear what these findings mean for human patients and the impact it could have on men (or the male children of pregnant women) who take CBD.” The fact sheet also some side effects that CBD use could produce including sleepiness, gastrointestinal distress and changes in mood.

What Now?

The FDA says they are actively researching and working on learning more about the safety of CBD products. They listed a couple risks that they are looking into right now: Those include, cumulative exposure (What if you use CBD products daily for a week or a month?), special populations (effects of CBD on the elderly, pregnant or nursing women, children, etc.) and CBD in animals (safety of CBD use in pets or food-producing animals and the resulting safety of human food products like milk or eggs).

While the CBD products market could still be classified as a bit of a gray market currently, the FDA says they are working on researching it more to develop an appropriate regulatory framework. What that might look like is anyone’s guess. One thing that remains clear, however, is that the FDA will not tolerate CBD companies marketing products in ways described above. Those include making unsubstantiated health claims, marketing to children, using CBD as an ingredient in foods and marketing it as a dietary supplement.

November 22, 2019

How to Protect Your Business from the Emerging Vaping Crisis

By Tom BeLusko, Kelly McCann

No Comments

The year 2020 may become a pivotal year for cannabis operators and service providers, including increased access to financial services, and increased exposure to product liability lawsuits. On a positive note, if enacted, the Secure and Fair Enforcement Banking Act of 2019 (SAFE Banking Act) promises to enable cannabis businesses to gain access to financial services previously unavailable to them, including banking and insurance services. The House of Representatives passed the SAFE Banking Act of 2019 on September 25^th, 2019. Skopos Labs, an automated predictive intelligence service, predicts there is a 52% chance of the SAFE Banking Act of 2019 becoming law. A recent discovery that vitamin E acetate is likely the culprit in the vaping-related illness epidemic may increase the exposure to costly litigation that cannabis businesses face.

An uptick in litigation like that currently affecting the vaping industry may soon affect cannabis businesses. More litigation affecting the vaping industry is due in large part to the growing number of lung injuries and deaths linked to vaping. As of November 13^th, 2019, the CDC reported 2,172 cases of lung injury, and 42 deaths linked to vaping. The cases of lung injury and death have predictably resulted in an increase in litigation facing the vaping industry. Most of the plaintiffs in these cases allege they became addicted to vaping but at least two lawsuits go further. In one, a Connecticut man alleges that he suffered a massive, debilitating stroke as a result of vaping, while in another the parents of a teenage girl allege in a proposed class action suit that their daughter has suffered seizures linked to vaping. On November 14^th, 2019, the CDC identified vitamin E acetate as a chemical of concern among people with vaping use associated lung injury. Vitamin E acetate is an additive commonly used as a cutting agent in vape cartridges. About 86% of individuals who have either vaping-related lung injuries, or died due to vaping had used a product containing THC.

The increase in perceived exposure cannabis businesses face has increased their interest in obtaining insurance, but unfortunately insurers are not always interested in insuring them. There are at least two reasons that getting insurance can be difficult for cannabis businesses: (1) insurance industry appetite for cannabis risk is very low due to its status under federal law and (2) express coverage exclusions or limitations of cannabis exposures from standard-form coverage are becoming more common. However, even if cannabis businesses are able to obtain insurance, their insurance may cover them for far less than they believe.

The product liability coverage (which is increasingly crucial for both growers and manufacturers given the mounting litigation facing the vaping industry) may cover far less than it at first appears. The interplay of exclusions and limited coverages in many cannabis-specific policies may leave a cannabis business uninsured.

It is vital now more than ever to ensure you are properly protected against loss.Crucial for cannabis businesses to appreciate is the distinction between “occurrence” and “claims-made” coverage triggers as it relates to both the premises on which cannabis businesses operate their business, and the products they sell.

Many cannabis businesses have an occurrence-based general liability insurance that might actually exclude: (1) product-liability risks; (2) any tobacco-related risks; and (3) any risk associated with governmental investigation or enforcement. These exclusions oftentimes concern cannabis businesses because there is a high likelihood one of these risks could manifest itself as an uninsured loss. Still, the costs of eliminating these exclusions in an occurrence-based general liability insurance policy is often large, assuming an insurer is willing to eliminate the exclusions on an occurrence basis at all. Therefore, cannabis businesses often pair their general liability insurance policy with a “claims-made” coverage trigger for products liability. Navigating the waters of managing the differences between “occurrence” and “claims-made” forms are best left to a qualified and experienced insurance professional.

Consult a local insurance professional that understands how to help your business become properly protected in what would be considered a tumultuous market for this burgeoning industry.

It is vital now more than ever to ensure you are properly protected against loss. As a first step, you must determine what your current insurance policy does and does not cover. After a loss, it is too late to change policies. Rely upon someone that knows the market of insuring this industry and has deep experience in managing both occurrence and claims-made policies.

November 18, 2019

Standardization: A Guide Through the Minefield

By Steven Burton

No Comments

Now that cannabis edibles have been legalized nationally in Canada, many existing and aspiring license holders have been surprised to discover that they must comply with food safety regulations. This became crystal clear when Health Canada published their Good Production Practices Guide For Cannabis in August 2019.

With this development, it should be obvious to everyone that Good Manufacturing Practices (GMP) certifications are simply not enough.

Hazard Analysis and Critical Control Point (HACCP) based preventative control programs are now the absolute minimum and higher levels of certification (GFSI) should be on everyone’s wish list.

HACCP is a methodology that is all about identifying biological, chemical and physical hazards and determining how they will be controlled to mitigate the risk of injury to humans. Recently, bio-terrorism and food fraud hazards have been added to the list and it is a good idea to address quality hazards as well.

The process of developing a HACCP program involves identifying these hazards with respect to ingredients, materials, packaging, processes and cross-contamination points (explicitly required in Canada only). However, it is a specific ingredient hazard that I’d like to talk about here.

As this market has emerged, I’ve met with many cannabis companies as the onerous levels of knowledge and effort required to build and maintain an effective HACCP program manually has dawned upon the industry. Many are looking for technological solutions to quickly solve this problem. During these discussions, a curious fact has emerged that set off the food safety alarm klaxons around here.

Most people alive today are too young to remember this but, with few exceptions, the standardization of ingredients is a relatively modern phenomenon. It used to be that the fat content of your milk varied from season to season and cow to cow. Over time, the food industry standardized so that, amazingly, you can now choose between milks with either 1% or 2% fat, a level of precision that would border on miraculous to someone born in the early 20th century.

The standardization of ingredients is important in terms of both quality and safety. Take alcohol for example. We know that a shot of spirits generally contains 40% alcohol. Different products may vary from this standard but, if I pour a shot of my favourite Bowmore No.1 single malt in Canada or Tasmania, this year or 10 years from now, I can expect a consistent effect from the 40% alcohol content of the quantity I’ve imbibed.

Imagine a world in which this was not the case, where one shot would be 40% but the next might be 80%. Things could get out of control quite easily at the 80% level so, to avoid this, distillers monitor and blend their product to ensure they achieve the 40% target, which is called the “standardization marker”.

With respect to cannabis, the obvious standardization marker is THC. During the manufacturing process, edibles manufacturers do not normally add cannabis flower directly into their products but instead add a THC concentrate produced during previous production steps. However, we’ve found that the wisdom of standardizing these concentrates has not yet dawned upon many in the industry, which is alarming at best and dangerous at worst.

The reason for this is that, since cannabis is inherently a heterogeneous plant, one cannot precisely achieve a particular marker value so the outcome of the concentration process is variable. The food industry long ago overcame this problem by blending or diluting to achieve a consistent marker concentration, but the cannabis industry has not yet adopted this advance.

The cannabis edibles industry is still immature and it will take time to bring all the necessary risk mitigation processes into place but one excellent place to start is to seriously consider standardizing concentrates to a THC marker.Instead, manufacturers simply keep track of the strength of each batch of concentrate and then adjust the quantity added to their recipes to achieve the desired THC content. This seems logical on the surface but presents a serious risk from the HACCP perspective, namely a chemical hazard, “Excessive psychoactive compound concentrations due to human error at levels that may be injurious to human health”.

The reality is that workers make mistakes, which is why it is imperative to mitigate the risk of human error insomuch as possible. One of the best ways to do this is to standardize to avoid the scenario where a worker, faced with a row of identical containers that are differentiated only by a tiny bit of text, accidentally grabs the wrong bottle. The error isn’t caught until the product has been shipped, consumed, and reports of hospital visits start coming in after the authorities trace the problem back to you. You must bear the costs of the recall, your reputation has been decimated and your company is floundering on the financial rocks.

US-based Drip More, LP recently found this out the hard way after consumers complained that their product tasted bad, bitter and/or harsh. An investigation determined that excessive nicotine content was the source of the problem and a voluntary recall was initiated. Affected product that had already been sold in 26 states. The costs of this recall have not been tallied but they will be staggering.

October 28, 2019

Aphria, Inc. Implements Quality Management Systems

By Cannabis Industry Journal Staff

1 Comment

According to a press release published today, Aphria Inc. has implemented Rootstock Software’s cloud Enterprise Resource Planning (ERP) solutions and ComplianceQuest’s Enterprise Quality Management System (EQMS). Aphria, one of the largest cannabis companies in the world, trades on both the Toronto Stock Exchange and the New York Stock Exchange.

Rootstock’s cloud ERP software includes things like order processing, production management, supply chain management, lot and serial number trackability and traceability, compliance reporting, costing and financial management. ComplianceQuest’s EQMS software provides support for GMP compliance and can help improve efficiencies in operations. The EQMS focuses on quality and risk management across Aphria’s business platforms, from sourcing to manufacturing to supply chain management.

Aphria is using the entire EQMS platform, which includes software to handle documents, training, changes, inspections, nonconformance, corrective actions (CAPA) and customer complaints which integrates to Rootstock’s ERP. According to the press release, the company is currently working to roll-out audit, equipment, incident and supplier management functions and will be fully live with the entire quality system in the next few months.

According to Tim Purdie, chief information officer & chief information security officer of Aphria Inc., both platforms delivered on their implementation. “Grounded in the scalability of the force.com platform, CQ transformed our quality management operating capabilities overnight and we are delighted at the fully integrated partnership result,” says Purdie. “We now have fully digital real-time informatics and ability to implement change in a highly transparent manner to meet the demands of our high growth business.”

Adding that Rootstock ERP will help facilitate their company’s production, inventory and supply chain management, Purdie says both platforms will enable Aphria to be increasingly responsive to market needs. “Aphria is setting the standard as a worldwide leader in the cannabis industry through a diversified approach to innovation, corporate citizenship, strategic partnerships and global expansion,” Purdie says. “With these system implementations, we’re now technologically equipped to take our competitive advantage to new levels of market leadership.”

October 21, 2019

Soapbox

Cannabis Growers and Distributors: Your Cyber Risk is Growing Like Weeds

By Emily Selck

No Comments

Cannabis growers and distributors are “green” when it comes to cyber security. Unaware of the real risks, cannabis businesses consistently fall short of instituting some of the most basic cybersecurity protections, leaving them increasingly vulnerable to a cyber-attack.

Cannabis businesses are especially attractive to hackers because of the vast amount of personally identifiable and protected health information they’re required to collect as well as the crop trade secrets they store. With businesses growing by leaps and bounds, and more and more Americans and Canadians purchasing cannabis, cybercriminals are likely to increase their attacks on the North American market in the coming year. Arm your cannabis business with the following best practices for growers and distributors.

Distributor Risk = A Customer’s PII

Cyber risk is the greatest for cannabis distributors, required to collect personal identifiable information (PII), including driver’s licenses, credit cards, medical history and insurance information from patients. State regulatory oversight further compounds the distributor’s risk of cyber-attack. If you’re a cannabis distributor, you’ll want to make sure to:

Know where you retain buyer information, and understand how it can potentially be breached. Are you scanning driver’s licenses into a database, or retaining paper files? Are you keeping them in a secure area off site, or on a protected network? Make sure a member of your management team is maintaining compliance with HIPAA and state statutes and requirements for cannabis distribution.
Institute strong employee oversight rules. Every employee does not have to have access to every sale, or your entire database of proprietary customer information. Delegate jobs behind the sales desk. Give each employee the access they need to do their job – and that’s it.
Distributors have to protect grower’s R&D information too. Most cannabis distributors have access to their grower’s proprietary R&D information so they can help customers understand which products are best for different medical symptoms/needs. Make sure your employees don’t reveal too much to put your suppliers in potential risk of cyberattack.

Grower Risk = Crop Trade Secrets

For cannabis growers, the risk is specific to crop trade secrets, research and development (R&D). If you’re a cannabis grower, you’ll want to:

Secure your R&D process. If you’ve created a cannabis formula that reduces anxiety or pain or boosts energy, these “recipes” are your competitive advantage – your intellectual property. Consider the way you store information behind the R&D of your cannabis crops. Do you store it on electronic file, or a computer desktop? What type of credentials do people need to access it? Other industries will use a third party cloud service to store their R&D information, but with cannabis businesses that’s typically not the case. Instead, many growers maintain their own servers because they feel this risk is so great, and because their business is growing so fast, there are not yet on the cloud.
Limit the number of people with access to your “secret sauce.” When workers are harvesting crop, or you’re renting land from farmers and planting on it, make sure to keep proprietary information in the hands of just the few who need it – and no one else. This is especially important when sharing details with third party vendors.

Cyber coverage is now ripe for picking

Although cannabis businesses are hard to insure – for just about every type of risk – cyber insurance options for cannabis companies have recently expanded, and come down in price. If you’ve looked for cyber coverage in the past and were previously unable to secure it, now is the time to revisit the market.

Know that cyber policy underwriters will do additional due diligence, going beyond the typical policy application, and ask about the types of proprietary information you collect from customers, as well as how you store and access it at a later date. Have this knowledge at your fingertips, and be ready to talk to underwriters about it when you’re bidding for a new policy – and at renewal time.

October 17, 2019

The Best Way to Remediate Moldy Cannabis is No Remediation at All

By Ingo Mueller

3 Comments

Consumers are largely unaware that most commercial cannabis grown today undergoes some form of decontamination to treat the industry’s growing problem of mold, yeast and other microbial pathogens. As more cannabis brands fail regulatory testing for contaminants, businesses are increasingly turning to radiation, ozone gas, hydrogen peroxide or other damaging remediation methods to ensure compliance and avoid product recalls. It has made cannabis cultivation and extraction more challenging and more expensive than ever, not to mention inflaming the industry’s ongoing supply problem.

The problem is only going to get worse as states like Nevada and California are beginning to implement more regulations including even tougher microbial contamination limits. The technological and economic burdens are becoming too much for some cultivators, driving some of them out of business. It’s also putting an even greater strain on them to meet product demand.

It’s critical that the industry establishes new product standards to reassure consumers that the cannabis products they buy are safe. But it is even more critical that the industry look beyond traditional agricultural remediation methods to solve the microbial problems.

Compounding Risks

Mold and other microbial pathogens are found everywhere in the environment, including the air, food and water that people consume. While there is no consensus yet on the health consequences of consuming these contaminants through cannabis, risks are certainly emerging. According to a 2015 study by the Cannabis Safety Instituteⁱ, molds are generally harmless in the environment, but some may present a health threat when inhaled, particularly to immunocompromised individuals. Mycotoxins resulting from molds such as Aspergillus can cause illnesses such as allergic bronchopulmonary aspergillosis. Even when killed with treatment, the dead pathogens could trigger allergies or asthma.

Photo credit: Steep Hill- a petri dish of mold growth from tested cannabis

There is an abundance of pathogens that can affect cannabis cultivation, but the most common types are Botrytis (bud rot, sometimes called gray mold) and Powdery Mildew. They are also among the most devastating blights to cannabis crops. Numerous chemical controls are available to help prevent or stem an outbreak, ranging from fungicides and horticultural oils to bicarbonates and biological controls. While these controls may save an otherwise doomed crop, they introduce their own potential health risks through the overexposure and consumption of chemical residues.

The issue is further compounded by the fact that the states in which cannabis is legal can’t agree on which microbial pathogens to test for, nor how to test. Colorado, for instance, requires only three pathogen tests (for salmonella, E. coli, and mycotoxins from mold), while Massachusetts has exceedingly strict testing regulations for clean products. Massachusetts-based testing lab, ProVerde Laboratories, reports that approximately 30% of the cannabis flowers it tests have some kind of mold or yeast contamination.

If a cannabis product fails required microbial testing and can’t be remedied in a compliant way, the grower will inevitably experience a severe – and potentially crippling – financial hit to a lost crop. Willow Industries, a microbial remediation company, says that cannabis microbial contamination is projected to be a $3 billion problem by 2020ⁱⁱ.

Remediation Falls Short
With the financial stakes so high, the cannabis industry has taken cues from the food industry and adopted a variety of ways to remediate cannabis harvests contaminated with pathogens. Ketch DeGabrielle of Qloris Consulting spent two years studying cannabis microbial remediation methods and summarized their pros and consⁱⁱⁱ.

He found that some common sterilization approaches like autoclaves, steam and dry heat are impractical for cannabis due the decarboxylation and harsh damage they inflict on the product. Some growers spray or immerse cannabis flowers in hydrogen peroxide, but the resulting moisture can actually cause more spores to germinate, while the chemical reduces the terpene content in the flowers.

Powdery mildew starts with white/grey spots seen on the upper leaves surface

The more favored, technologically advanced remediation approaches include ozone or similar gas treatment, which is relatively inexpensive and treats the entire plant. However, it’s difficult to gas products on a large scale, and gas results in terpene loss. Microwaves can kill pathogens effectively through cellular rupture, but can burn the product. Ionizing radiation kills microbial life by destroying their DNA, but the process can create carcinogenic chemical compounds and harmful free radicals. Radio frequency (which DeGabrielle considers the best method) effectively kills yeast and mold by oscillating the water in them, but it can result in moisture and terpene loss.

The bottom line: no remediation method is perfect. Prevention of microbial contamination is a better approach. But all three conventional approaches to cannabis cultivation – outdoors, greenhouses and indoor grow operations – make it extremely difficult to control contamination. Mold spores can easily gain a foothold both indoors and out through air, water, food and human contact, quickly spreading into an epidemic.

The industry needs to establish new quality standards for product purity and employ new growing practices to meet them. Advanced technologies can help create near perfect growing ecosystems and microclimates for growing cannabis free of mold contamination. Internet of Things sensors combined with AI-driven robotics and automation can dramatically reduce human intervention in the growing process, along with human-induced contamination. Natural sunlight supplemented with new lighting technologies that provide near full-light and UV spectrum can stimulate robust growth more resistant to disease. Computational fluid dynamic models can help growers achieve optimal temperature, humidity, velocity, filtration and sanitation of air flow. And tissue culture micropropagation of plant stock can eliminate virus and pathogen threats, to name just a few of the latest innovations.

Growing legal cannabis today is a risky business that can cost growers millions of dollars if pathogens contaminate a crop. Remediation methods to remove microbial contamination may work to varying degrees, but they introduce another set of problems that can impact consumer health and comprise product quality.

References

i. Holmes M, Vyas JM, Steinbach W, McPartland J. 2015. Microbiological Safety Testing of Cannabis. Cannabis Safety Institute. http://cannabissafetyinstitute.org/wp-content/uploads/2015/06/Microbiological-Safety-Testing-of-Cannabis.pdf

ii. Jill Ellsworth, June 2019, Eliminating Microbials in Marijuana, Willow Industries, https://willowindustries.com/eliminating-microbials-in-marijuana/#

iii. Ketch DeGabrielle, April 2018, Largest U.S. Cannabis Farm Shares Two Years of Mold Remediation Research, Analytical Cannabis, https://www.analyticalcannabis.com/articles/largest-us-cannabis-farm-shares-two-years-of-mold-remediation-research-299842