Tag Archives: marijuana

September 20, 2021

Leaders in Cannabis Formulations: Part 4 – LifeTonic

By Aaron Green

Russell is the CEO of NES Technology Holdings, a technology development and marketing company that operates Vapor Distilled and LifeTonic Brands. NES Technology Holdings has invented a technology portfolio of more than 160 granted and pending patents that cover inventions across several high-value industries, including cannabis, beverage, fragrance and nutraceuticals. The company is currently in license acquisition diligence processes with 7 of world’s 10 largest fragrance companies and has received a joint venture offer from a $3 billion fragrance company to produce perfumes with its extraction technology. It is also launching ionized cannabis beverage products that provide effects as quickly as alcohol in Nevada and Colorado this fall.

Vapor Distilled invented and commercialized an evaporative extraction process with 40 international patents granted and pending that, along with CO2 extraction, is one of only two fundamentally new extraction processes invented in the last 50 years. Instead of using solvents or hydrocarbons to extract oils from plants, evaporative extraction directly evaporates essential oils from plants and condenses the evaporated compounds into an extract. The process takes less than two seconds to complete and extracts higher levels of volatile terpenes than existing extraction methods. Vapor Distilled has built a fleet of commercial-scale extraction machines and has supplied some of the cannabis industry’s largest brands. The company is currently licensing its evaporative extraction technology within the perfume industry and is marketing an aroma hop extract to replace the dry hopping step when making beer.

LifeTonic invented a drug delivery technology with 56 patents pending and granted, that turns oil-based plant compounds like CBD and THC into electrically charged cannabinoid ions that dissolve completely in water without emulsifiers or additives. When cannabinoids are ionized, absorption is significantly enhanced and their effects can be felt in minutes. The effects of a LifeTonic ionized CBD beverage can be felt by most people in less than 5 minutes, whereas the effects of a LifeTonic ionized THC beverage can be felt by most people in less than 8 minutes. For reference, typical onset times for cannabis beverages are 30 minutes or longer. LifeTonic beverage technology will allow cannabis beverages to work as quickly as alcohol, enabling cannabis to become a social drink.

We spoke with Russell Thomas, CEO of Vapor Distilled and LifeTonic about his cannabinoid evaporation process and rapid onset beverage technologies. Thomas is a career entrepreneur and inventor with 21 years of experience inventing and protecting intellectual property. Russell’s team has generated more than 160 granted and pending patents. Prior to entering the cannabis industry, Thomas worked in the cleantech industry.

Aaron Green: How did you get involved in the cannabis industry?

Russell Thomas: I came to the cannabis industry from the cleantech industry where I worked on technologies that improved the fuel economy of vehicles. I saw opportunities in the cannabis industry to improve cannabis extraction, which was one of the most important supply chain verticals in cannabis. Every product, from edibles to beverages and vape products, requires a cannabis extract. Any product that needs to be accurately dosed requires an extract. The old way of making edible products with cannabis butter was simply not viable as the industry matured, and most people were rapidly moving away from smoking cannabis and embracing vape products. Even with the entire industry almost completely dependent on extraction, no fundamental innovation was occurring. The primary ways that cannabis was being extracted were chemically intensive. The cleaner methods, such as CO2 extraction, were slow and expensive for terpene recovery. I saw this as a great opportunity to provide a better solution within a primary funnel of the cannabis supply chain.

We commercialized an extraction technology that evaporates cannabinoids directly from plant material in the form of vapor, and then recondenses that vapor back into an essential oil. The entire process takes less than two seconds to complete and preserves fragile terpenes. That technology, called Evaporative Extraction, is the foundation of Vapor Distilled.

Green: What timeframe was that roughly?

Thomas: We capitalized our company in 2015 and began selling wholesale extracts in 2017.

Green: Can you talk more about the evaporative extraction process?

Thomas: Our process works in a similar way to a cannabis vaporizer, but on a massive scale. Our extract is literally recondensed cannabis vapor. In one step, we extract, refine, and activate cannabinoids. On one end, plant material goes in the machine, and on the other end, extract and depleted plant material comes out. Our total extraction time is less than two seconds if you measure the time from when the plant material goes into the extractor and when the extract is condensed.

A continuous feed of dry plant material is introduced into a heated air stream. The air stream pneumatically conveys the plant material through a series of turbulent, heated evaporation chambers. Upon entering the evaporation chambers, volatile plant compounds are instantaneously distilled from the plant material. A centrifugal separator removes the depleted plant material from the air stream. The air stream is rapidly cooled, causing the volatile plant compounds to condense into an essential oil.

We achieve nearly total activation of THCA to THC simultaneously during extraction and, on average, we extract approximately two to four times more terpenes than a conventional extraction process. The cannabis industry is rampant with exaggeration about terpenes, but we are the only cannabis company negotiating a joint venture with a $3 billion fragrance company to produce perfumes, and I think that says a lot about our process.

Green: Is the extract coming out then as an oil?

Thomas: Our extract comes out of our machines as a fully-activated, high-terpene content, full spectrum oil. Unlike the THC crude that emerges from other processes, our extract requires no further distillation, activation or refinement. You can put it straight into a product.

Green: How about terpene recovery?

Thomas: This is by far what we do best. We excel with the recovery terpenes and volatile compounds from plant material. From day one, we noticed that our evaporative extraction process yields about two to four times more terpenes by mass compared to traditional extraction methods.

While we started as a cannabis company, we recently received a compelling joint venture offer from a $3 billion fragrance company to produce perfume products with our technology. We are also under NDA with 7 of the world’s 10 largest fragrance companies to complete diligence processes to license our extraction technology.

As part of our licensing diligence process, we are performing paid fragrance extraction research for three multi-billion-dollar fragrance companies. Our evaporative extracted fragrance extracts are presenting a broader and more complete range of volatile compounds compared reference samples. We are also seeing substantially improved yield of volatile fragrance compounds. Combined, this gives us the advantage of being able to produce more extract at a lower cost, while also producing a superior product. This combination is how licensees can take market share away from any fragrance company that does not have access to our technology, and it is why we are seeing so much rapid traction in this area.

We have also extracted hops with our technology. If you’ve ever smelled a traditional hops resin, it smells good, but the smell doesn’t fill the room. If you put just a drop of our hops extract on any surface, the entire room will smell strongly of a premium IPA beer. It’s so potent you don’t want to get it on your hands or clothes because you will smell like beer for hours. It’s powerful and wonderful stuff!

Green: What is your business model?

Thomas: At our core, we are a technology development and licensing company. We first identify what we believe to be critical verticals and bottlenecks in high-value industries, then we develop and patent highly differentiated and disruptive technology solutions that we believe exist nowhere else. We then demonstrate both market fit and viability at scale through proof-of-concept sales of branded and high-profile, white-labeled products produced with our unique technologies. Finally, we systematically license and exit the various portions our IP portfolio though the orchestration of highly competitive bidding processes that promote both defensive and strategic acquisitions of our technologies. We are currently at the final phase of our model with licensing our extraction technology, and we are receiving offers as part of a competitive bidding process.

Green: Okay, let’s change gears here and start talking more about LifeTonic and your cannabinoid ionization technology. Can you talk high level about the onset times of cannabinoids in different matrices and media?

Thomas: Through LifeTonic, we invented 56 international patents granted and pending cannabinoid ionization technology that compresses the normal onset time of cannabis beverages from 30 minutes down to just a few minutes. Our cannabinoid ionization technology can also be used as a rapid onset vape alternative when sold in a breath spray format. We are currently selling hemp-based versions of these products through LifeTonic.com, and we are bringing THC versions of these products to market in Nevada and Colorado this fall and winter under the brand name LifeTonic.

All conventional and even nano-emulsified cannabis edibles and beverages take a long time to work. A cannabis chocolate can take 45 minutes to two hours before the effects kick in. Cannabis gummies are faster, but it still takes half an hour to 45 minutes to feel the effects. The very best nano-emulsified cannabis beverages take about a half an hour to work on average, if you are lucky. That long of a time delay effectively eliminates the social aspect of consuming cannabis, so most people instead choose to vaporize or smoke cannabis.

If you look at the largest investments that have been made across cannabis, some of the most prominent have been made by alcohol companies. Constellation Brands invested nearly $4 billion into Canopy Growth, with a mission to find an alternative to alcohol in cannabis. Molson Coors has partnered with Hexo and AB InBev has partnered with Tilray, both with that same mission. Even after all this effort and investment, cannabis beverages represent just a sliver of the market because current cannabis-based beverages take too long to work. The fastest ones on the market, on average, take around a half hour to kick in.

Imagine going to a bar and knowing that every time you got a shot of tequila or a shot of whiskey it’s going to take thirty minutes or more for the effects to even begin to kick in. That would be terrible. That would be the end of social drinking. Unfortunately, that is how a conventional cannabis beverage works.

You can’t really get a social drinking experience with cannabis yet, so most people vape it because it’s fast. But a lot of people don’t want to smoke something; in fact, they don’t want to inhale at all. So, we saw beverages as a huge opportunity. How do we make cannabis beverages work as fast as alcohol? That’s what our ionization technology delivers. From all the people we’ve surveyed – hundreds of people – they say that they reliably feel an onset within about seven to eight minutes with our technology. That is just about as fast as a shot of tequila or whiskey.

“With our partners, we will be featuring LifeTonic beverage products on tap in a cannabis cocktail lounge right off the Las Vegas strip, where social consumption rules are welcoming.”What we’ve done is very different from available nanoemulsion technologies. All those technologies try to mix oil and water, and oil and water don’t mix. In a nanoemulsion, you mix cannabis, a carrier oil, an edible detergent and water, and then you run it all through an ultrasonic homogenizer that breaks the cannabinoids and oil into microscopic droplets suspended in water. There are a lot of styles of nanoemulsions, from spray-dried nanoemulsions to liquid liposomal encapsulations, and they all confer certain absorption benefits when compared to straight-up oil absorption. But still, even the microscopic oil droplets suspended in water are quite large compared to what we have done, and still take quite a long time to digest.

We looked at the cannabis molecule and we said, “You know what? If we can put a strong negative charge on it, if we can ionize it, then we can make it behave more like a dissolvable salt instead of an oil.” When we treat it this way, the cannabis molecule dissolves completely in the water without emulsifiers or additives. When something is dissolved, there is no nano-emulsion droplet size. It is single molecules dissolved water. A single ionized cannabinoid molecule is about 1,000 times smaller than an average nano-emulsion droplet – and this greatly enhances absorption. The onset speed of ionized cannabinoids compared to nanoemulsions is measurable as just a few minutes instead of a half hour or more.

We have 56 granted and pending patents on LifeTonic’s ionization technology. We can ionize THC, CBD, CBG and CBD – most cannabinoids are compatible. There are also several herbal products that are compatible with our ionization technology, like the curcuminoids in turmeric, which are normally very hard to get into water. We can also ionize the eugenol that is in cloves. Ionized eugenol is an intoxicant, so we have big plans for alcohol alternatives outside of cannabis.

We’re using this technology to enter the Nevada cannabis market with one of the largest dispensary chains and cannabis product manufacturers in Nevada. With our partners, we will be featuring LifeTonic beverage products on tap in a cannabis cocktail lounge right off the Las Vegas strip, where social consumption rules are welcoming. We’ll craft every kind of cocktail you can imagine, only without alcohol. All these beverages will work in a matter of minutes to provide the first true social drinking experience with cannabis. After you enjoy a beverage, you may purchase a package of ionized THC beverage powder sachets in the cannabis cocktail lounge or at any of the dispensaries within our distribution network. You can pour the powder into any beverage, and it becomes a friendly, fast-acting THC beverage that will get you high, but not leave you with a hangover. We will also be selling a breath-spray format that works almost as quickly as vaping.

Green: What kind of validation studies have you done?

Thomas: We have conducted several broad market studies for our ionized products and almost all people report a profound onset within a few minutes. We have not completed a formalized clinical trial, but we are closing a major funding round that will allow us to do so. We plan to begin controlled pre-clinical trials focused mainly on ionized CBD because it’s far easier to get FDA approval for clinical trials on CBD than for THC. Our studies will monitor a couple dozen volunteers with a functional MRI and watch the change in the brain using our oral spray and beverage products compared against a standard CBD tincture control. We know that we’re going to see fast action because everybody who uses it says that a feeling develops in minutes.

Green: What geographies are you active in and exploring?

Thomas: CBD and hemp products from our extraction technology have been sold in every US state and parts of Europe. Additionally, hemp-based CBD and CBG versions of our ionized products and ionized turmeric products have been sold in several states through our LifeTonic.com, our ecommerce site. We have also sold white labeled versions of our ionized products through partner brands. We will be launching THC versions of our ionized products with our partners Nevada this fall. We expect THC versions to also be available in Colorado this winter.

Green: So, you are creating the powders on site?

Thomas: Yes. We manufacture ionized CBD, CBG, eugenol and turmeric beverage powders on site. We also manufacture and fast acting ionized sprays. These products are sold through our own retail site and we white label for other brands. Per our long-term licensing strategy, these sales establish market viability through sales. Selling products and establishing market viability prior to licensing significantly increases the value of our licenses and exits. It’s very important to answer the question: Do people buy it and do people love it? So far, we like the feedback!

On the THC side, we manufacture ionized products through partners in each cannabis state that we enter. We manufacture the ionizing base here in Colorado, then we ship it to other states where our partners add the THC and package it in LifeTonic-branded packaging. The analogy is that we sell a proprietary Coca-Cola formula without the caffeine, then our partners add the caffeine and bottle it in Coca-Cola branded bottles. In this way, we ensure that the hardest part of our process is controlled house to ensure consistency and quality across all states. It also allows us to be a non-plant touching business, since we only sold upstream base products that did not contain THC. We pick the best manufacturing and distribution partner in each cannabis state and grow from there.

Green: What’s the one thing you’re most interested in learning about?

Thomas: Increasing the bioavailability of cannabis. I have been most passionate about making cannabis work as quickly as alcohol and giving people an alternative to inhaling it through smoking or vaping. That’s definitely what we’ve been most excited about as a company.

Green: Okay, great. That concludes the interview!

Thomas: Thank you Aaron!

September 15, 2021

FDA Issues Warnings on Delta-8 THC Products

By Cannabis Industry Journal Staff

No Comments

On September 14, the FDA published a consumer update on their website, seeking to educate the public and offer a public health warning on delta-8 tetrahydrocannabinol, otherwise known as delta-8 THC.

For the uninitiated, delta-8 THC is a cannabinoid that can be synthesized from cannabidiol (CBD) derived from hemp. It is an isomer of delta-9 THC, the more commonly known psychoactive cannabinoid found in cannabis. Delta-8 THC does produce psychoactive effects, though not quite as much as its better-known cousin, delta-9 THC.

Due to loopholes in federal and state laws, namely the 2018 Farm Bill specifying that hemp must contain less than 0.3% Delta-9 THC, delta-8 THC is technically legal across the country. It grew in popularity across the United States very quickly over the past year, largely due to online sales.

Following the surge in sales, a number of states including Colorado, Alaska, Arizona, Arkansas, Delaware, Idaho, Iowa, Mississippi, Montana, Rhode Island, Utah and Washington have implemented some form of regulation or outright ban on products containing delta-8 THC. Christopher Hudalla, president and chief scientific officer of ProVerde Laboratories, told Chemical & Engineering News that he has a lot of safety concerns about the whole delta-8 THC craze. Hudalla says he’s more concerned about the processing involved to produce it in large quantities. “These are pretty aggressive synthetic conditions that use strong acids,” Hudalla says. “They might be using strong bases to neutralize. They can use metal catalysts. I hear different people doing it different ways.”

The FDA’s consumer update included this picture at the top of the page

The FDA shares similar concerns. Their fourth point in the consumer update mentions that delta-8 THC products “often involve use of potentially harmful chemicals” in its production. They even claim that some manufacturers might be using unsafe household chemicals to synthesize delta-8 THC. “The final delta-8 THC product may have potentially harmful by-products (contaminants) due to the chemicals used in the process, and there is uncertainty with respect to other potential contaminants that may be present or produced depending on the composition of the starting raw material,” reads the FDA report.

In their consumer update, they note that between December 2020 and July 2021, they received 22 adverse event reports. Of the 22 reports, 14 were hospitalized following ingesting a delta-8 THC product. Notably, those reports included reactions consistent with symptoms from overconsumption of delta-9 THC, such as vomiting, hallucinations, trouble standing, and loss of consciousness.

The FDA says that national poison control centers received 661 cases of delta-8 THC products, with 41% being unintentional exposure, 39% involved pediatric patients and 18% required hospitalization.

In the consumer update, they tell the public that delta-8 THC products have not been evaluated by the FDA and that they “may be marketed in ways that put the public health at risk.” This includes marketing it as a hemp product, which it is. Still though, many consumers associate hemp products with somewhat innocuous things, like CBD oil, which is mostly harmless.

The FDA also mentions in the update that delta-8 THC does have psychoactive and intoxicating effects. The FDA says they are notifying the public about the delta-8 THC due to an uptick in adverse event reports, marketing that is appealing to children and concerns regarding manufacturing with unsafe chemicals and contaminants.

September 15, 2021

WeedMaps Acquires Sprout

By Cannabis Industry Journal Staff

No Comments

The WeedMaps parent company, WM Technology, Inc., announced this week that they have acquired Sprout, a cloud-based CRM and marketing platform in the cannabis industry. Sprout’s CRM software is used by dispensaries, distributors and cultivators in 28 different states and offers a variety of marketing services like text marketing, email marketing, coupons, surveys and more.

The Sprout Messenger software was launched back in April of this year and at the time was touted as a gamechanger in marketing technology, allowing companies to interact with their customers via email, text and their in-house chat in two-way chats.

WM Technology, Inc. was originally founded in 2008. Based in Irvine, California, the company’s business-to-consumer platform, WeedMaps, is known as a go-to resource for consumers seeking cannabis retailers. The app and website now offer online ordering, brand listings, product information and consumer education.

On the business-to-business side, WM Technology, Inc. has grown to include WM Business, a cloud-based SaaS solutions platform with offerings like point of sale, logistics, wholesale and ordering solutions software.

The acquisition of Sprout will help the WM Technology team grow their WM Business portfolio to offer more software solutions, according to Chris Beals, CEO and chairman of WM Technology, Inc. “Our strategy focuses on establishing WM Business as the software solution of choice for cannabis businesses,” says Beals. “With the addition of Sprout, we are one step closer to realizing this vision of providing an all-in-one seamless and integrated solution to run, manage, and grow one’s cannabis business. This acquisition will allow our clients to better target, reach, acquire and retain customers at scale.”

WM Technology, Inc. did not disclose the financial details of the acquisition yet.

September 14, 2021

2021 Cannabis Labs Virtual Conference: September Program

By Cannabis Industry Journal Staff

No Comments

2021 Cannabis Labs Virtual Conference: September Program

Click here to watch the recording

Agenda

Hemp & Delta-8 in the United States: The Evolution of the Hemp Testing Market

Charles Deibel, President & CEO, Deibel Labs, Inc.

In this session, Charles Deibel discusses the current state of affairs across the country with respect to hemp testing. This includes a look at hemp testing rules at the state and federal level. He also provides an in-depth analysis on delta-8 THC and the controversy surrounding this cannabinoid, how to analyze samples of it and why the market has exploded around this product.

TechTalk: Hardy Diagnostics

Jessa Youngblood, Food & Beverage Marketing Coordinator, Cannabis Industry Specialist, Hardy Diagnostics

ISO 17025 Accreditation is NOT the Golden Ticket

Kathleen May, Founder & Owner, Triskele Quality Solutions

This presentation discusses where the standard falls short, how poor lab practices may negatively impact the consumer and how poor or insufficient lab practices could result in regulatory action, including product recalls, fines, and loss of licenses.

TechTalk: ANAB

Melanie Ross, Technical Products Developer, ANSI National Accreditation Board (ANAB)

TechTalk: Columbia Labs

Kelly O’Connor, Sales Director Key Accounts, Columbia Labs

Pesticides in Hemp: Challenges and Solutions

Grace Bandong, Business Unit Manger for Contaminants, Eurofins Food Chemistry Testing (EFCT)

This presentation takes a deep dive into understanding the requirements for pesticide testing, approaches to analysis and responding to regulatory requirements with extremely low LOQs.

TechTalk: Perkin Elmer

Tim Cooper, Sr. Manager, Software Development, PerkinElmer

This presentation provides an overview of how standards are developed and used, how Official Methods for cannabis are developed as well as training opportunities and proficiency testing.

What to Expect When Opening a Lab in a New State

Michael Kahn, Founder & CEO, MCR Labs

Kahn explores the lab’s role int he cannabis industry, the importance of knowing and understand state regulations and lessons for growing your lab while maintaining quality.

Click here to watch the recording

September 13, 2021

3 Pillars of Cannabis Banking Compliance

By Mark Lozzi

No Comments

Few people will disagree that financial compliance isn’t the most exciting topic within the cannabis industry. But compliance is, and always will be, the engine grease to the legal cannabis market. Cannabis operators have the arduous task of dealing with multiple layers of compliance, both operational (maintaining and adhering to regulations enforced by the state licensing board) and financial. These compliance measures include managing everything from seed-to-sale systems for all plant-related activity to on-site requirements like facility access points and alarms systems to name a few.

With complex compliance requirements for the business, the last thing cannabis operators want to think about is financial compliance. We created Confia on this notion. Just as cannabis regulators impose the tracking of plants through the supply chain via a seed-to-sale system, we have developed a storyboard similarly designed to follow the money, which is the equivalent of a transaction-to-deposit system.

Having experience in regulatory technology, artificial intelligence and machine learning, we’ve been fortunate enough to work with some of the world’s largest banks across multiple countries. This experience has afforded us the luxury of working alongside regulators, chief compliance officers and chief risk officers, understanding how risk is perceived by financial institutions and how it ought to be mitigated. It was this access and knowledge that allowed us to effectively reform, enhance and improve the antiquated BSA programs with a technology-enabled process. Leveraging technology is a necessity, almost a requirement, for the cannabis industry as legalization nears and banking access begins to broaden.

Jamming cannabis requirements into an existing BSA program doesn’t scale well. BSA programs are very manual, descriptive and process oriented. So, we’ve taken our prior experience and success in banking to form Confia, distilling the complexities and simplifying the deliverables surrounding cannabis banking compliance. To best articulate cannabis banking requirements, I break it down into three pillars.

Pillar One: KYC-Enhanced Due Diligence

The first pillar is the client-onboarding bucket or KYC – Know Your Customer. In the complex world of cannabis banking, banks must know and understand their clients to great depths. It’s not enough to simply know that the client exists; you also have to understand whether or not that client could be a potential risk to the bank, and one step further, the financial system. Cannabis is a high-risk industry, so the KYC requirement is escalated to a deeper diligence and review, called Enhanced Due Diligence (EDD).

Banks need to know and understand their customers’ story, and all the key parties (officers, directors, and those with key decision-making powers or access to the bank accounts) within that organization. This includes reviewing personal, business, and legal history – not to mention watchlists and negative news presence. An initial onboarding review must then be followed with daily screening and monitoring of all watchlists and adverse media. Typically, banks do KYC refreshes every three years. In cannabis, a full refresh should be done annually with the daily monitoring systems in place.

The high-risk nature of the industry also requires a level of diligence on all parties to a transaction, even if one of the parties, whether a payer or recipient, is not a client of your bank. Unlike traditional banking sectors, reliance on other banks’ KYC programs is far less defensible in the cannabis industry.

Pillar Two: Transactional Monitoring & Detection

Tracking and monitoring the actual financial transactions comprises the second pillar required for cannabis banking. At Confia, we have focused on streamlining processes, so the cannabis operator can seamlessly support the compliance obligation for every transaction. A bank must demonstrate supporting documentation for every cannabis transaction, and gathering such information is a large undertaking in and of itself and can pose future issues if not done properly, see the pitfalls for lack of compliance. Banks are obligated to understand the nature and reason for each transaction, the source of funds, ensure cannabis licenses are in good standing for all parties, and collect evidence such as accounting records and seed-to-sale data.

Core to transaction monitoring in the traditional sense, is the overarching support through anomaly detection. Relying on information is important, but testing those inputs keeps everyone honest. It is important to evaluate transactions from a holistic point of view relative to peers and relative to the general contents of a transaction. This anomaly detection layer is your last line of defense, and as new information is collected, it continues to refine itself.

Pillar Three: Filing and Reporting Requirements

The third component to compliant cannabis banking is regulatory filing and reporting. Once a client is onboarded, the account requires an initial suspicious activity report or SAR-Initial within 30 days of that client being approved by the bank. Then, a report must be filed every 90 days after that for all the transactions of that cannabis operator. Banks must file the SAR-Initial and the Continuing-SAR reports for each cannabis client they have.

Solutions like Confia automate the filing process and support the filing with transactional data evidenced on our distributed ledger of record. This provides immutable audibility and simplifies the process for all parties involved.

Compliance Requirements After US Legalization

The anticipation of federal legalization and banking reform bills has many operators hoping for easier banking. Yet, in my opinion, regulatory oversight and audits will likely increase after such reform or legalization. As other financial institutions start to support cannabis, it will inadvertently create greater opportunity and expose the financial system to nefarious or illegitimate transaction activity. This is why cannabis banking will be carefully monitored by regulators, and more so, why banks will be slow and pragmatic in standing up their internal cannabis banking programs. Some banks may forever avoid the cannabis industry due to the known pitfalls of an industry specific program, while others may simply mitigate the possible exposure to reputational risk.

Choose Wisely: Pitfalls for Lack of Compliance

Financial compliance is the responsibility and duty of the banks, but the real losers and result of non-compliance always fall on the cannabis operators. Regulatory action against an institution may result in the bank shutting down its cannabis program or may require them to complete a remediation of all their cannabis transactions for a certain period from its clients. At the end of the day, regardless of action, the cannabis operator is the one being punished. Operators either lose their bank account and have business massively disrupted, or they are asked to provide all the compliance docs for a historic period, which is a huge undertaking and operational distraction, ultimately impacting business and productivity. So, choose your banking partner wisely.

Summarizing Key Banking Requirements

In summary, banking in the cannabis industry will undoubtedly remain a high-risk industry, with or without legalization. Although banking opportunities may expand as US policies change, there will be continued compliance and regulatory requirements for the foreseeable future.

Onboarding and ongoing screening are critical
Evidence for every transaction is a significant portion of compliance and must not be dismissed
Evaluating activity with broader strokes is essential in mitigating against money laundering
Managing the staggered filing timelines and due dates for each client

Compliance is the most crucial factor in cannabis banking at this point. It cannot be overlooked or taken for granted. Cannabis operators must take an active role in evaluating the compliance programs of their financial providers. To open a bank account is one thing, but the consideration and effort that goes into keeping a bank account is the difference that will protect your business in the long run.

September 9, 2021

Organizations Submit Comments on CAOA

By Cannabis Industry Journal Staff

No Comments

Earlier this summer in July, Senators Chuck Schumer, Ron Wyden and Cory Booker held a press conference where they introduced the first draft of the Cannabis Administration and Opportunity Act (CAOA). During the press conference, the Senators laid out the foundation for their comprehensive cannabis legalization measure, emphasizing the need to address social equity and social justice matters, while also asking for support in revising the draft bill.

In response to that call for input on the draft legislation, a number of nonprofits and trade organizations last week submitted comments. Among the organizations to submit comments on the new legislative proposal to end federal cannabis prohibition were a lot of cannabis advocacy organizations: The National Cannabis Industry Association (NCIA), the Marijuana Policy Project (MPP), the National Organization for the Reform of Marijuana Laws (NORML), the Minority Cannabis Business Association (MCBA) and the Coalition for Cannabis Policy, Education, and Regulation (CPEAR). To refresh your memory, CPEAR is a controversial trade organization founded in March of this year by corporate interests in big alcohol and tobacco.

Regardless of the interests behind the organizations, all of them seemed to have comments that aligned with one another. All of the comments submitted by those organizations had a common theme: social equity. Even CPEAR submitted comments highlighting the importance of “providing substantial opportunities for small and minority-owned businesses.”

The NCIA’s comments are perhaps the most comprehensive of the group, outlining an equitable, state-centric and small business-focused plan for federal cannabis reform. The MCBA’s comments reflect its mission and focus on things like restorative justice, minority participation, equitable access and inclusion.

The MPP’s comments are noteworthy because of their concerns regarding a number of regulations. Karen O’Keefe, state policies director at the MPP, says certain aspects of the regulatory scheme need clarification. “Our two major areas of concern are: the possible upending of state licensing and regulatory systems — driving sales underground — and the impact on medical cannabis access, including for those under the age of 21,” says O’Keefe.

NORML’s feedback is also particularly poignant. They ask to leave medical cannabis markets exempted from the federal excise tax proposed and for the federal government to balance roles shared between the FDA, TTB and ATF to ensure that individual state markets won’t be adversely affected by federal regulation.

To learn more, take a look at the draft legislation in its entirety here.

September 3, 2021

Leaders in Cannabis Formulations: Part 3 – RealSleep

By Aaron Green

No Comments

Sleep health is a large and growing global market. According to Statista, the global market value of the sleep market was $432B in 2019 with an expected CAGR of 6.3% from 2019 to 2024. Supplements are a growing category of popular sleep health products with common ingredients including melatonin, valerian root, and more recently cannabinoids such as CBD and CBN.

RealSleep is a cannabinoid formulation company developing personalized products to improve sleep outcomes. RealSleep’s product strategy has been developed by top scientists and sleep experts, and clinically tested to aid individuals seeking to fall asleep faster, sleep deeper and cut down on sleep disturbances. Their studies have shown that 90% of people taking RealSleep have reported experiencing better sleep immediately

We spoke with Michael Kamins, co-founder and partner of OpenNest Labs and RealSleep, about RealSleep’s innovation in personalized formulations for better sleep. Kamins founded RealSleep as an incubated company under OpenNest Labs, where he is also a founding partner. Michael is the Chief Community Officer of the Wholistic Research and Education Foundation, and just led the world’s largest study on CBD and general health with Wholistic and Radicle Science, where he is also an advisor. Prior to RealSleep, Michael worked in tech where he was an early employee at Musical.ly (now TikTok) building brand partnerships.

Aaron Green: How did you get involved in the cannabis industry?

Michael Kamins: I got into the industry professionally about two and a half years ago, but my relationship with the plant goes back to high school. Prior to jumping into this space, I was working primarily in digital media. I was an early employee at Musical.ly, (eventually rebranded as TikTok), leading global music partnerships and growth. I helped grow that business by leveraging the social capital of music artists and celebrities and doing partnerships with record labels. At the end of 2018, I really saw the opportunity in the cannabis space. One of my best friends in Los Angeles, Dr. Jeff Chen, someone I did my MBA with at UCLA, became the founder and executive director of cannabis research at UCLA Medical. Seeing all the clinical research that he was doing and the objective health outcome data coming out of that research was really a huge inspiration to me. I saw a massive whitespace and opportunity to help build that bridge between the medical community and the cannabis marketplace. There’s been almost a century of cannabis prohibition setting back our scientific understanding of the plant. We know more about the rivers and plants in the Amazon than we do about the composition and compounds within the cannabis plant with regards to their wellness benefits.

I met my partners, Tyler Wakstein, Kris Bjornerud and Max Goldstein and we started a cannabis venture studio called OpenNest Labs, which is building out a diversified portfolio of cannabis consumer brands. We are focused on leveraging our collective experience at building ventures and communities and rallying those communities around a brand.

Over the last two and a half years, it’s been super exciting building brands that you see on shelves. We’re still in the early stages right now of building brand loyalty. A lot of cannabis consumers are still going into dispensaries and asking, “what is the cheapest product that I can buy with the highest potency?”

Green: Tell me about RealSleep, how did you come up with the idea and what is the basic concept for the end user?

Kamins: RealSleep comes from the passion that I had developed for medicinal aspects of the cannabis and hemp plant, thinking about not only THC and CBD – which are two major cannabinoids in the plant – but also thinking about the other 120 plus cannabinoids, each with their own unique properties.

It turns out that half the world’s population suffers from one poor night of sleep a week, and sleep issues lead to the highest rate of other comorbidities. We were thinking about the addressable sleep market, with ourselves being a part of that market, and wanting to build products that would help not only ourselves, but the countless other people around the world that suffer from poor sleep too, as it impacts their daily lives.

I’ve had issues with sleep myself. I have a genetic hearing condition called tinnitus. It’s a ringing in your ears that other people can experience environmentally from exposure to loud noises. I’ve had loud ringing in my ears my entire life even in quiet situations, like right before I go to sleep. I’ll often be lying in bed awake for an hour or two unable to sleep with the ringing. Everyone else on the team has had their own sleep issues and realized the profound negative impact of lack of sleep on other areas of health and wellness, whether it be next day energy or immunity.

We felt that by leveraging our access to the medical research community and even running clinical research on our own to validate the efficacy of the product relative to other products on the shelves, we could create a product that was safe and effective. We came across a clinical trial on insomnia and CBD by one of our research partners, the Wholistic Research and Education Foundation. What we saw from a lot of that anecdotal data was that CBD, and hemp in general, really helps to provide restful and restorative sleep.

CBD and CBN are two highly effective compounds for sleep and melatonin is by far the most widely researched and used over the counter sleep aid. We are sourcing clinical research on other ingredients such as valerian root, L-Theanine and GABA, and the list of ingredients goes on. We were interested in formulating a product that incorporates these safe and effective ingredients.

We noticed from our research and our access that sleep is as unique to an individual as their fingerprint. Take brainwave patterns when you are sleeping as an example. No one person’s patterns are the same. You could essentially identify an individual based on those patterns. One solution, or one product, is not going to help everyone. So, we worked with UCLA and the head of their laboratory of sleep and circadian medicine, a gentleman by the name of Dr. Chris Colwell, to understand the science of sleep. He is one of the most renowned sleep researchers in the world and is the head of our scientific advisory board for RealSleep. We’ve done clinical studies with over 900 people and 10,200 nights of sleep and used this data to develop a personalization engine in the form of a quiz that takes 90 seconds and allows us to map ingredients to specific answer selections. From these answers we deliver products that are customized to the individual consumer specific to their unique needs

We’re proud of the journey that we’ve gone on to understand the science and research behind sleep and to develop this personalization engine variations of products that work for each individual and their unique needs.

Green: Tell me how the questionnaire and personalization engine works. I understand the ingredient profile will change based on the customer’s responses?

Kamins: Sleep impacts an individual’s general health and wellness. For me, if I don’t sleep well, my next day is filled with anxiety, and that anxiety leads to worse sleep; it’s a vicious cycle. For other people, it could be a metabolic issue that leads to poor sleep or poor sleep that leads to weight issues. The list of other health issues and diseases linked to poor sleep goes on. So, while we’re looking at combating sleep to prevent other health issues down the road, one person who’s looking to get better sleep to improve one aspect of their life could be different from another person and the area of life they are looking to improve upon.

The quiz is essentially a combination of validated, reliable and flexible measures of patient reported outcomes. We use a combination of gold standard patient reported sleep questionnaires, one of which is called the Pittsburgh Sleep Quality Index, another being the RAND MOS scale, and others. We also work with our scientific advisory board and machine learning experts to advise us on customizing these questions with logic. We then use the responses to generate the appropriate formulations for our customers.

The questions cover everything from very specific questions on sleep, like sleep latency (the time it takes to get the bed) or sleep fragmentation (the number of times you wake up in the middle of the night) sleep duration, sleep quality, and then other areas of health that you’re looking to improve upon. Examples include metabolism, cardiovascular health, skin health, anxiety and stress. So, all these things factor into the different ingredients that we layer into the formulation.

Let’s say you don’t have a problem getting to sleep, but you wake up a lot of times in the middle of the night. Your formulation might be very different from someone who has trouble getting to sleep, but they don’t wake up in the middle of the night. Overall, one of our big goals with the formulation of all these products is that they increase your next day cognitive alertness by giving you that high sleep quality and restorative sleep. We don’t want to make anyone groggy the next day. Because overall, what you’re trying to achieve with sleep is you want to be ready to go the next day and be able to perform at your peak.

Green: So, you mentioned CBD, CBN and melatonin already as ingredients. Are there any other ingredients?

Kamins: Depending on what your answer selections are for the quiz, we will layer in L-Theanine, valerian root, Ashwagandha and even some of the other novel cannabinoids like CBC (cannabichromene). We have about 24 different ingredients that we can layer in, so it just depends. When you look at all the permutations and combinations of formulations and dosages, it’s in the trillions. From a supply chain standpoint, we’ve simplified it in a way that makes it very easy to funnel people into one of many predefined combinations of ingredients and dosage levels.

Our algorithm is an unstructured machine learning algorithm. The more people that take the quiz and the more people that provide feedback on their sleep score makes our programming and our personalization engine smarter.

Green: How does your manufacturing and packaging work?

Kamins: We have a strong relationship with a pharmaceutical partner that we have been growing even before RealSleep. It is a pharmaceutical manufacturing facility underneath a regional health care provider in the state of California. Everything they do is incredible. It’s a state-of-the-art facility and focused on complete transparency and building the products with the highest efficacy and safety profiles. They’re based in LA, and they’ve been such a pleasure to build our supply chain with.

Green: What kind of trends are you looking at in the formulation space?

Kamins: From a cannabinoid side, there’s been a bit more of a look towards some of the novel cannabinoids that have traditionally catered to a niche consumer base that is educated on cannabis. From being inside the industry, it’s very easy for me to talk about all the different cannabinoids, but a lot of people still don’t even know the difference between THC and CBD.

Our goal overall is to build efficacious products and educate people on all the different formulations and the different ingredients going in. Outside of cannabis, this year we’ve seen a large boom in consumer demand for Ashwagandha. There’s just so much hype around it in terms of how it impacts stress and energy and even libido, which is interesting. It’s probably the hottest non-cannabinoid ingredient that we’ve seen. Specific to sleep, the combination of L-Theanine and GABA and how they potentiate each other is impactful. Then there’s valerian root, which has been a big one over the last few years for sleep.

Green: Last question. What are you most interested in learning about?

Kamins: A personal interest of mine over the last few years is understanding from a scientific perspective, each of the cannabis compounds in greater detail. I think part of it is just really the curiosity to know the unknown. We’re at a point in the industry where there are still so many unknowns on the science-side of cannabinoids.

My passion for science has led me to support medical researchers in the space, so much so that I am an advisor and chief community officer to a nonprofit medical research organization called the Wholistic Research and Education Foundation, which to date has funded over six and a half million dollars in human clinical trials with cannabinoid rich therapeutics. One we’re currently conducting at UC San Diego is studying the impact of CBD on autism and other neurological conditions. That’s given me incredible exposure to research in the space. I am also a strategic advisor to a for profit medical research organization called Radicle Science, which is a very swiftly running clinical research for CBD and other cannabis brands in the space.

All in all, I’m driven by the possibilities that come with continuing to unlock the science behind the plant. By doing so, we can innovate products with efficacy and can educate people who are uninformed about the therapeutic benefits of cannabis, which will in turn benefit the industry and society. Striving for research breakthroughs and being transparent about our findings is going to help us destigmatize cannabis and legitimize the industry.

Green: That concludes the interview. Thanks, Michael!

Kamins: Thanks, Aaron.

September 2, 2021

Colorado to Bolster Hemp Testing Rules, Rollout Delayed

By Aaron G. Biros

1 Comment

Earlier this year, the Colorado Department of Public Health and Environment (CDPHE) announced a plan to introduce new testing rules for the state’s growing hemp industry. Under the new regulations, hemp products must be tested for residual solvents, heavy metals and pesticides, in addition to making sure they contain less than 0.3% THC.

The CDPHE are planning on a gradual rollout to prevent any supply chain issues or a lab testing bottleneck, similar to what we’ve seen in other states launching new testing requirements in years past, such as Arizona or California. Well, the Colorado rollout appears to be hitting similar snags and because of supply chain issues related to instruments and consumables in laboratories, the implementation of those testing rules is somewhat delayed. What was originally supposed to be implemented over the summer was pushed back to an October 1 deadline, and that deadline has now been pushed back to 2022.

The pesticide testing list to be implemented January 1, 2022

As a result of supply chain shortages and the learning curve to test for such a wide range of pesticides, Colorado is opening hemp testing to out-of-state labs in an effort to stay on schedule with the rollout. Dillon Burns, lab manager at InfiniteCAL, a cannabis testing company with locations in California and Michigan, just completed an audit with the CDPHE in their work to get certified and start conducting hemp testing for businesses in Colorado.

Burns says they’re well-acquainted with the list of pesticides because of how similar the list is to California’s requirements. “For the pesticide testing rules that were supposed to go into effect on August 1^st, it’s basically the same list as California just with slightly different action levels,” says Burns. “I would say these action limits are generally stricter – they have much lower LOQs [limits of quantification].”

The pesticide testing list (continued) to be implemented January 1, 2022

Come January 1, 2022, they are expecting an additional 40 pesticides to be required under the new rules. “But currently, it’s still unclear when these regulations will actually go into effect,” says Burns. The full pesticide testing list is currently slated to be implemented on April 1, 2022.

The supply chain issues referenced above have a lot to do with what the state is asking labs to test for. Previously, most of the pesticides tested for under Colorado’s adult use and medical cannabis programs could be analyzed with an LC/MS. A handful of pesticides on the new list do require GC/MS, says Burns. It’s entirely possible that a lot of labs in Colorado just don’t have a GC/MS or are in the process of training staff and developing methods for using the new instrument. “Cleanliness of these instruments is such a priority that it takes time to acquire the right skill set for it,” says Burns.

Dillon Burns, Lab Manager at InfiniteCAL

The new testing rollout isn’t just another compliance hurdle for the cannabis industry; these rules are about protecting public health. Dillon Burns said he’s seen hiccups in California with the amount of new hemp farmers getting into the space. “The hemp products we’ve tested in California often fail for pesticides,” says Burns. It’s a lot easier in most states to get a license for growing hemp than it would be for growing adult use cannabis. “You’ll see a lot more novice growers getting into hemp farming without a background in it. They’ll fail for things they just haven’t considered, like environmental drift. We see a lot of fails in CA. Hemp is bioaccumulating so it presents a lot of problems. If they’re not required to look for it, they weren’t monitoring it.”

When asked how the market might react to the new rules, Burns was confident that Colorado knows what they’re doing. “I don’t anticipate that [a testing bottleneck] happening here. The regulators are reasonable, supportive of the industry and opening it up to out-of-state labs should help in preventing that.”

September 1, 2021

Best Practices for Training New Hires and Documenting Operations

By Dede Perkins

No Comments

Let’s just say it. There is an undeniable chaos in the cannabis industry. It doesn’t matter if you’re a big or small operator, it’s likely that you don’t have a documented system for creating and managing ever-changing SOPs or for consistently training all employees on the most current versions of those SOPs. This chaos is often the result of rapid growth, mergers and acquisitions, and the ever-present turnover in our industry. When department leadership changes, and it often does, established policies and procedures are often left behind. In some cases, this is a positive sign of growth. As a company outgrows SOPs and as it develops more sophisticated ways to cultivate, extract, process, manufacture, package and sell cannabis and cannabis products, inevitably, the old ways of doing business need to be replaced. For those operators who have prioritized operational excellence, whether they want to position their company for new investment, merger or acquisition, or just want to create a consistent and standardized, branded product, it’s critical to get control of SOPs, training and documentation.

Food processing and sanitation — By standardizing and documenting safety procedures, manufacturers mitigate the risk of cannabis-specific concerns

As with most big goals, to obtain operational excellence, you need to break the goal into manageable steps. Assuming you have accessible quality policies and procedures in place, properly training employees when they first start work and on an ongoing basis as policies and procedures change is the number one key to successful operations. When employees know how to do their job and understand what is expected of them, they are positioned for success. When employees are successful, it follows that the company will also be successful. Documenting operations is a second important step in obtaining operational excellence. While training and documentation appear to be different, in best-practice organizations, they are inextricably linked.

One Set of SOPs

Those of us who have been in the cannabis industry for a while have experienced firsthand or heard stories of facility staff working off of two sets of SOPs. There’s the set of SOPs that are printed or digitally available for the regulators, let’s call them the “ideal” set, and then there are the SOPs that actually get implemented on a day-to-day basis. While this is common, it’s risky and undermines the foundation of operational excellence. Employees often know there are two sets of SOPs. Whether they express it or not, many are uncomfortable with the intentional or unintentional deception. When regulators arrive, will they have to bend the truth or even lie about daily operations? Taking the time to establish and implement one set of approved SOPs that is compliant with both external regulations and internal standards is good for employee morale, productivity and ultimately, profits.

What’s the best way to get control of a facility’s SOPs? Again, break it into manageable steps:

First, task someone with reviewing all SOPs that are floating around. Determine if any are non-compliant, which ones need to be tossed and which ones need to be revised so they work for the company as well as outside regulatory authorities.
At a minimum, establish a two-person team to draft, review, publish and distribute the final SOPs. Ensure that at least one member of the team has management level authority. Assign that employee the responsibility of reviewing the SOPs before “publication” and distribution.
Archive, delete, or actually throw away outdated or non-compliant SOPs
Revise or create new best-practice SOPs that are in compliance with external regulations and internal standards
Establish a system to update SOPs when external regulations and internal standards change
Use a naming convention that distinguishes draft SOPs from final SOPs, for example, “Post-Harvest Procedure, FINAL”
Inform employees that they will be retrained on the new SOPs and that approved SOPs will always have the word “Final” in the title
Store the final SOPs in an easily accessible location and give employees access, not only during training, but on an ongoing basis

Centralized Repository for Final SOPs

Storing final, approved SOPs in one easily accessible, centralized location and giving employees access sounds simple, but again, this is the cannabis industry, so this often doesn’t happen. Many of us have or are currently working for an organization that stores SOPs in multiple places. Each department may have its own way of updating, disseminating and storing SOPs. Some SOPs are stored in a printed binder stuffed in a drawer or left on a bottom shelf. Others are stored digitally. Some use both systems, which creates confusion. Who knows if the digital versions or the printed versions are the most current? Surely someone knows, but often the front-line staff do not.“Once you’ve established a single set of compliant SOPs and have stored them in one accessible location, it’s time to train your employees.”

Establishing a centralized repository for final, approved SOPs is the foundation of operational excellence. It lets employees know that operations are organized and controlled, and it reassures regulatory authorities and external stakeholders—think insurers, bankers, investors—that the company prioritizes compliance and organization. And external stakeholders who believe that an organization is proactive and well-run tend to be more forgiving when the inevitable missteps occur. Companies that are organized, have effective training systems, regularly conduct internal audits to identify potential issues and take identifiable action steps when necessary to remediate issues, receive fewer deficiency notices, violations and fines than their less organized competitors.

Train Employees

Many states require cannabis operators to provide a specific number of training hours prior to an employee beginning work, and a specific number of continuing and refresher training hours annually. Once you’ve established a single set of compliant SOPs and have stored them in one accessible location, it’s time to train your employees. To do so, set clear expectations and decide who is responsible for what. Is the HR manager responsible for initial onboarding and training? Are department managers responsible for ongoing and annual training? Create a training responsibility chart that works best for your company; write it down and share with all stakeholders.

The next step is to figure out how to train your employees. Individuals have different learning styles, so ideally, you’ll offer multiple ways for them to master the requirements of their position. Assign written materials and if possible, attach short videos showing the best way to complete a task. Follow up with a quiz to determine comprehension and a conversation with a department lead or manager to answer questions and review the key take-aways. Ideally, the department manager or lead employee will work with the employee until they are competent and comfortable taking on new assigned tasks and responsibilities.

Sum It Up

Operational excellence begins with:

Knowledge of and access to current external rules and regulations and internal standards
One set of approved and easily accessible policies and SOPs that comply with both external and internal standards
An initial training system with clearly assigned roles, responsibilities, and goals
An ongoing training system with clearly assigned roles, responsibilities, and goals
Systems to:
- Test knowledge before employees begin unsupervised work
- Stay up-to-date with all changes to external rules and regulations and internal standards
- Control policy and SOP revision process
- Inform all stakeholders when policies and SOPs change
- Test that employees understand new standards
- Document all key areas of operation on a recurring basis
- Address deficiencies and evaluate whether SOP revisions are warranted
- Document and implement necessary remediation when necessary

For those of you rolling your eyes and thinking you don’t have time for this, ask yourself, “Can you afford not to?”

For those of you committed to operational excellence and doing what it takes to get there, congratulations on being a visionary leader. Your efforts will pay dividends for your own company and will help the cannabis industry grow into a well-respected, profitable industry that improves lives.

September 1, 2021

6 Trends Influencing the Cannabidiol (CBD) Market Forecast Through 2027

By Shreya Bhute

No Comments

The rise in the number of optimistic regulatory frameworks instigated by various regional governments will positively anchor the forecast for the cannabidiol (CBD) market. The growing awareness regarding the benefits and effects of the product as an alternative treatment method has accelerated its preference among consumers and suppliers. Moreover, the continued advancements in the approval processes by various authorities worldwide have also made way for numerous opportunities supporting CBD market growth.

According to a report by Global Market Insights, Inc, the global CBD market size could exceed $108.8 billion by 2027.

Growing presence in cosmetics

The overall industry share from creams and roll-on products is poised to hit a 35.8% CAGR up to 2027. This is owing to the increasing scope of CBD in cosmetic applications as it is highly effective in treating skin conditions. This, as well as its anti-inflammatory characteristics from a medicinal perspective, are leading to increased demand for CBD products like creams and roll-ons.

Scope in the treatment of mental health

Some of the many infused products on the market today.

CBD market value from anxiety/stress applications exceeded USD 1.5 billion in 2020 due to the growing need for helping mental health. The World Health Organization reported that over 4.5% of the total population in Europe suffers from depression. This escalating anxiety and stress rate has encouraged healthcare practitioners to increasingly make use of CBD-based medications.

Higher demand for oral administration

Demand for oral cannabidiol administration held nearly 45% of the industry proportion in 2020 due to its growing preference considering the gradual relief of pain compared to other disorders. The increasing dependency on the oral administration route for product development by several manufacturers will add positive impetus to market growth.

Medical benefits of cannabis

Annual revenue of the CBD market from the segment of the market dealing with THC (and CBD) products is expected to cross USD 30.1 billion by 2027. This is largely due to its increasing penetration across various countries and regions on account of its legal status. Furthermore, the relatively higher THC content of the compound has led to its growing usage to combat medical conditions, including Alzheimer’s and Parkinson’s disease, among others.

Online distribution to see a considerable footprint

Ads for CBD products online regularly perform very well

The online CBD industry was responsible for more than 46% of the market in 2020. This is mainly due to the numerous advantages of online channels, like on-time delivery and adequate inventory, compared to their offline counterparts. Besides, this distribution platform minimizes the operational costs related to the maintenance of brick and mortar retail.

Australia to lead the regional landscape

Australia dominated the Asia Pacific CBD market by holding over 25% of the market share owing to the expanding geriatric population and the liberal stance of the regulating bodies in the region. The permittance to the medicinal and cosmetic use of CBD products is likely to spur regional adoption. The rising amendments in regulatory scenarios have also triggered awareness regarding the potential benefits of the product in the country. For instance, in April 2020, the Australian government released a new proposal for over-the-counter CBD in a bid to relax its narcotic scheduling whilst making it a Schedule 3 substance.

Providers of various CBD products are actively indulging in numerous growth strategies, like acquisitions and partnerships, to reinforce their market presence. For example, Mota Ventures Corp., in January 2020, acquired Spanish producer and online retailer, Sativida OU in a USD 2.2 million deal. The acquisition expanded the company’s presence in Europe and Latin America.

Although the demand for CBD is likely to experience certain hesitation from consumers in the short term, the market will witness lucrative growth in the long run. However, counterfeit and substandard quality products may potentially restrain industry expansion to some extent.